Database Develop

[PORT] [JB] CNA 3.1 for Atrix [ROM]- 08112012

CodeNamed Android (CNA)
Jelly Bean Build for
Motorola Atrix
By
cpetersen2791 with assistance from TeamMotoTegra
It's got great options and is a little different than AOKP!
WORKING:
Phone
Data
SMS/MMS working
Camera
Browser Rotation
Wifi (Tether only with Barnacle App-Included)
Build is based on Jokersax 0.1.2 beta with help from CNA for Photon from Th3Bill.
Special thanks to Th3Bill for his assistance on my first Port.
Enjoy
http://www.4shared.com/zip/3ynRdn_3/CNA-jb-08112012-2303.html
http://www.mediafire.com/?9axa2j6r98yy1ar
Usual ROM installation applies.
You should not have to wipe /data if you are already on a JB ROM.
1. Boot into Recovery
2. Wipe /system (/data if your not on a JB ROM)
3. Install ROM
4. Install Gapps
5. Wipe Cache and Dalvik
6. Reboot
Enjoy!

Reserved...I don't know why, but I see other developers do it!

Want to check it out, but is it possible to upload to a site that doesn't require signup?

Oh man, you lighted up my day. Yesterday I was wondering: "Why no one followed CNA project?" then signed up on forum and started to check how I can build it myself... now it's here next day. You've got my gratitude. Will check out asap
THANK YOU!

force closed when i go to Access Point Names.

Nice! Looking forward to trying this. I was a big fan of CNA while it was available on Atrix...

THX:thumbup:
Sent from my Nexus 7 using Tapatalk 2

nvm

Everything running smoothly, camera works well too.

CAn we switch beetween the inetrnal and sdcard?

Awesome! I'm still running the last ICS build of CNA for Atrix. Looks like i'll be upgrading to this soon thank you for your work!

monose1 said:
CAn we switch beetween the inetrnal and sdcard?
Click to expand...
Click to collapse
I haven't tried it. But its under settings, advanced.
Sent from my MB860 using Tapatalk

I assume camcorder is not working, but camera is?
Having a NOT WORKING section may be relevant.

knigitz said:
I assume camcorder is not working, but camera is?
Having a NOT WORKING section may be relevant.
Click to expand...
Click to collapse
Like ANY OTHER JB/ICS ROM...standard non working issues apply due not having proper drivers from Nvidia
Sent from my MB860 using Tapatalk

If you get camera lag, do the following
1) Open camera app
2) Close it
3) Long press home and swipe it away
4) Repeat steps 1-3 a few times (4-5). It should improve after a few times...after you do this initially, it should stick.
Camcorder isn't working yet....could TRY videocam illusion (I will admit that I haven't tried it yet on any JB build, though)

I got bootloop with this, it worked fine for like 20 min and bootloop started. Restored back to cm7, should I try flashing this again? Pretty sure its my phone and not the rom though.

Could it be that rom's clock is everytime at 1000 Mhz?
Also, if you go to rom settings, someplaces it shows as you've running the rom in a photon device.
I have to research in these two issues so i can send a report.

cpetersen2791 said:
CodeNamedAndroid (CNA)
Jelly Bean Build for
Motorola Atrix
By
cpetersen2791 with assistance from TeamMotoTegra
It's got great options and is a little different than AOKP!
WORKING:
Phone
Data
SMS/MMS working
Camera
Browser Rotation
Wifi (Tether only with Barnacle App-Included)
Build is based on Jokersax 0.1.2 beta with help from CNA for Photon from Th3Bill.
Special thanks to Th3Bill for his assistance on my first Port.
Enjoy
http://www.4shared.com/zip/3ynRdn_3/CNA-jb-08112012-2303.html
http://www.mediafire.com/?9axa2j6r98yy1ar
Usual ROM installation applies.
You should not have to wipe /data if you are already on a JB ROM.
1. Boot into Recovery
2. Wipe /system (/data if your not on a JB ROM)
3. Install ROM
4. Install Gapps
5. Wipe Cache and Dalvik
6. Reboot
Enjoy!
Click to expand...
Click to collapse
Camera work only for taking still image. Camcoder error !:crying:

Gapps included?
Sent from my MB860 using xda app-developers app

Th3Bill said:
If you get camera lag, do the following
1) Open camera app
2) Close it
3) Long press home and swipe it away
4) Repeat steps 1-3 a few times (4-5). It should improve after a few times...after you do this initially, it should stick.
Camcorder isn't working yet....could TRY videocam illusion (I will admit that I haven't tried it yet on any JB build, though)
Click to expand...
Click to collapse
Videocam Illusion Pro does work on JB - took a 4 minute video of the NJSP heli taking off - no real lag but it's not in hd either... i would have posted it but its around 100mb in size lol
---------- Post added at 06:32 AM ---------- Previous post was at 06:29 AM ----------
ATRIXXIRTA said:
Gapps included?
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
no, use jokers v3, works

[ROM][JB][AOSP] Lenovo Ideapad K1

This is an AOSP Jellybean build for the Lenovo Ideapad K1.
The nvflash package will will wipe your entire system. You will lose all data except what is stored on the EXTERNAL sdcard.
You can use the CWM package if you are already using an Ideapad Rom that includes Clockwork Mod recovery. You will need to wipe data before flashing the CWM package.
Includes
Android Jellybean 4.1.1
nvflash package includes krook1's ClockworkMod Recovery 6.0.1.1 build that supports both internal and external sdcard
JB Google Apps
OTA-UpdateCenter support for future OTA updates
Reboot option in power menu
Superuser
Issues
Video Camera face effects
Rotation Lock Switch (Software switch works)
Auto brightness
3G support
Downloads
As always flash at your own risk. I'm not responsible for your device.
Nvflash versions
K1_JB_AOSP.zip
Mirror
25f84b47420098d8c54195d84b3e13e3
CWM versions
CWM_K1_JB_AOSP.zip
ac961c73a9a5792a6c7b049937d43fdf
Instructions
Nvflash version
1. Download one of the packages above and extract it to a directory
2. Power off device
3. Press and hold both the Vol + and Vol - buttons
4. While holding both Volume buttons power the tablet on
5. The screen should go black and the two front LED's should remain lit. You are now in APX mode
6. Connect your device to USB
7a) Windows: Install the APX drivers from the 'drivers' folder
Double click the 'flash-windows.bat' file
7b) Linux: run 'chmod +x flash-linux.sh && sudo ./flash-linux.sh' from the extracted directory
CWM version
1. Download one of the CWM_K1_*.zip versions and move to external sdcard
2. Reboot into recovery
3. Install zip from sdcard
4. Choose zip from sdcard
5. Flash the update.
How to boot into recovery
Non-rooted version
1. Make sure you have the Android SDK installed. http://developer.android.com/sdk/index.html
2. Make sure USB Debugging is enabled on the tablet. Go to Settings > Developers options > and check "USB Debugging"
3. Connect the device to USB
4. Open a terminal or command prompt window and type
Code:
adb shell k1recovery
Rooted version
From a Terminal Application
Run the follow two commands
Code:
su
k1recovery
From adb
1. Make sure you have the Android SDK installed. http://developer.android.com/sdk/index.html
2. Make sure USB Debugging is enabled on the tablet. Go to Settings > Developers options > and check "USB Debugging"
3. Connect the device to USB
4. Open a terminal or command prompt window and type
Code:
adb shell k1recovery
Changelog
Code:
8/19/2012
-Initial Release
Source Code
http://github.com/khanning

khanning88 said:
This is an AOSP Jellybean build for the Lenovo Ideapad K1.
...
Click to expand...
Click to collapse
Hate to be a noob but is there an advantage of this over the CM10 build? I had heard that initially CM10 didn't have butter but I'm not sure if that's fixed or not.

gallahad2000 said:
Hate to be a noob but is there an advantage of this over the CM10 build? I had heard that initially CM10 didn't have butter but I'm not sure if that's fixed or not.
Click to expand...
Click to collapse
More choices the better I say. Someone might prefer AOSP over CM. I'm personally curious to try some AOKP on tablet. Anyways it's always great to see a device go from basically one rom to having 5 different roms all thanks to the manufacturer releasing code and our faithful devs.

Flashed the nvflash variant and restored apps via Titanium.
Everything is working really great, I prefer clean vanilla over CM and this is just perfect.
Thank you very much khanning!
P.S. Any idea what would have to be done to enable the home button to wake the tablet or what the issue with enabling that is?

I just installed it.
Don't see Google now anywhere.
Is it included?
Thanks.
---------- Post added at 03:29 AM ---------- Previous post was at 03:02 AM ----------
Also noticed something odd.
Some of the apps don't look optimized for a 10" tablet.
They look more like an app on a 7" tablet like the Nexus.
The Youtube app for instance, has only two rows in the carousel view as opposed to three.
Also, can't find Google search installed in the system.
I can't find Search in the Play store either.
Will it be OK if I just re-flash all Google apps for JB from this link using CWM?
http://goo.im/gapps/gapps-jb-20120726-signed.zip

ram1986 said:
I just installed it.
Don't see Google now anywhere.
Is it included?
Thanks.
---------- Post added at 03:29 AM ---------- Previous post was at 03:02 AM ----------
Also noticed something odd.
Some of the apps don't look optimized for a 10" tablet.
They look more like an app on a 7" tablet like the Nexus.
The Youtube app for instance, has only two rows in the carousel view as opposed to three.
Also, can't find Google search installed in the system.
I can't find Search in the Play store either.
Will it be OK if I just re-flash all Google apps for JB from this link using CWM?
http://goo.im/gapps/gapps-jb-20120726-signed.zip
Click to expand...
Click to collapse
Did you flash GApps? GNow is the replacement for search. That is why you don't have either.

Good job bro, keep up the awesome work .Thanks

me_is_rushin said:
Did you flash GApps? GNow is the replacement for search. That is why you don't have either.
Click to expand...
Click to collapse
GApps is not a separate package here unlike CM9 or CM10. It is included as part of Khanning's install files, so no need to install them separately.
Because of the absence of Google Search app and the issues with Youtube app not scaling properly, I asked if it is OK to reflash the JB Google apps pack again. Will that overwrite the system apps correctly? I haven't tried it yet. Maybe it is better to wait for Khanning's update.

Works great. Thanks
Sent from my Ideapad K1 using Tapatalk

File Mirror
Few items on my new/simple file share site pertaining to this thread as a fast alternative/mirror...
NOTE: k1.android....... VS. www.android........
K1_JB_AOSP.zip:
http://k1.androidfileshare.com/files/K1_JB_AOSP.zip
CWM_K1_JB_AOSP.zip:
http://k1.androidfileshare.com/files/CWM_K1_JB_AOSP.zip
-Cybie

ram1986 said:
GApps is not a separate package here unlike CM9 or CM10. It is included as part of Khanning's install files, so no need to install them separately.
Because of the absence of Google Search app and the issues with Youtube app not scaling properly, I asked if it is OK to reflash the JB Google apps pack again. Will that overwrite the system apps correctly? I haven't tried it yet. Maybe it is better to wait for Khanning's update.
Click to expand...
Click to collapse
I backed up and then flashed JB GApps and everything seems to be working fine after over 12 hours of use.

Hi may I knw how to flash d galls after JB?
Sent from my K1 using Tapatalk 2

Cybie's server is ridiculously fast.
Cybie257 said:
Few items on my new/simple file share site pertaining to this thread as a fast alternative/mirror...
NOTE: k1.android....... VS. www.android........
CWM_K1_JB_AOSP.zip:
http://k1.androidfileshare.com/files/CWM_K1_JB_AOSP.zip
-Cybie
Click to expand...
Click to collapse
Cybie, your server is ridiculously fast. It takes me 2-3min to download the 179mb rom connecting from China thru a vpn to your server.
:good::good::good::good::good::good::good:

Just thought id report so anyone else can try and replicate but hdmi output on both jelly bean roms is very blocky and not smooth like on honeycomb. Can anyone confirm?
Sent from my ST25i using xda app-developers app

jimmyboyuk1981 said:
Just thought id report so anyone else can try and replicate but hdmi output on both jelly bean roms is very blocky and not smooth like on honeycomb. Can anyone confirm?
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
I have an HDMI cable so I will check when I get home and report back.

So having tried all the recent builds posted by Khanning and Krook, I have gone back to Khanning's CM9 port as I think it is the most stable and has the most features.
Would stick around with CM9 until a more stable CM10/aosp build comes along.

Comparison between Khanning JB AOSP & Krook JB CM10, please?
ram1986 said:
So having tried all the recent builds posted by Khanning and Krook, I have gone back to Khanning's CM9 port as I think it is the most stable and has the most features.
Would stick around with CM9 until a more stable CM10/aosp build comes along.
Click to expand...
Click to collapse
I am on Krook JB (3g-test) which is based on Khanning's superb K1-CM9 for the past week or so and loving every minute of it even though there are still some issues that currently do not bother yet.
Khanning K1-CM9 is very good and Krook's JB brings it to another level of snappiness, somewhat buttery smooth.
For those who had installed both Khanning JB AOSP & Krook JB CM10, can you kindly do a comparison?
Sorry that I am too lazy to Titanium my K1 then flash then restore and go about all the settings all over again.

Maybe I missed something in the last page or so, but I just installed last night using NVFlash method and auto brightness is working. Has anyone else had similar results or am I alone in this one. I just checked the OP and auto bright is still listed as not working.
I do have to say, I have used Krook's CM JB and I find this as snappy. Nice to have a choice of flavors. Thanks, guys. You do great work.
Sent from my Ideapad K1 using xda premium

Nvflash Windows Drivers
Does anyone happen to have a link to the Nvflash Windows Drivers? Goo.im has lost them, and i can't seem to find another link.
Thank in advance.
edit: yep, i have a thinkpad. not a K1.

Thanks and Bug
thank you for this excellent ROM, is very fluid.
Reported no facial unlocking works, is trying to set it out, anyone know anything about this?

CM10 pre-alpha

All credit goes to @HashCode
@dhacker29
Just posting this for all of us at xda
Safe strap latest 3.05.19 and cm10 pre alpha ROM can be found :
http://goo.im/devs/Hashcode/scorpion_mini
Install new safe strap first, then flash cm10 after creating and activating rom-slot-1
Note : ROM may be a bit laggy at first
Known issues : camera broken
WiFi / Bluetooth broken
Headphones / speaker broken
Calls are a bit funky
Video / some 3d games broken
Other then that happy flashing / enjoy
4.1-4.2 *upgrade*
Credit goes to safariking
http://www.mediafire.com/?aldqml4r8jyzm87
Download zip and flash over cm10 for new 4.2 gapps
Inverted gapps :
Credit goes to xlory
http://d-h.st/0b1
Same as above just download zip and flash over cm10
*these are the stock cm10 gapps just inverted not the 4.2 gapps
Then of course , stock jellybean-cm10 gapps :
http://goo.im/gapps/gapps-jb-20121011-signed.zip
At first boot go to settings>performance
Set min cpufreq @ 1ghz and max @ 1.5ghz leave gov on interactive
Enable 16-bit transparency
Disable "surface improvement" dithering
Allow purging of assets
Set zram comp to 26%
Reboot, wait 10 min and reboot again
Also switch launcher or install 4.2 gapps as that launcher seems snappy

tadgerloks said:
All credit goes to @HashCode
@dhacker29
Just posting this for all of us at xda
Safe strap latest 3.05.19 and cm10 pre alpha ROM can be found :
http://goo.im/devs/Hashcode/scorpion_mini
Install new safe strap first, then flash cm10 after creating and activating rom-slot-1
Note : ROM may be a bit laggy at first
Known issues : camera broken
WiFi / Bluetooth broken
Headphones / speaker broken
Calls are a bit funky
Other then that happy flashing / enjoy
4.1-4.2 *upgrade*
Credit goes to safariking
http://www.mediafire.com/?aldqml4r8jyzm87
Download zip and flash over cm10 for new 4.2 gapps
Inverted gapps :
Credit goes to xlory
http://d-h.st/0b1
Same as above just download zip and flash over cm10
*these are the stock cm10 gapps just inverted not the 4.2 gapps
At first boot go to settings>performance
Set min cpufreq @ 1ghz and max @ 1.5ghz leave gov on interactive
Enable 16-bit transparency
Disable "surface improvement" dithering
Allow purging of assets
Set zram comp to 26%
Reboot, wait 10 min and reboot again
Also switch launcher or install 4.2 gapps as that launcher seems snappy
Click to expand...
Click to collapse
I'm very thankful and optimistic for this. Thanks so much.
But unfortunately i need features like Wi-Fi so i must wait until its more stable.
Looking forward to this though!
Sent from my XT907 using xda app-developers app

Is this a fully stable build of safestrap?
Sent from my XT907 using xda premium

jarzy00 said:
Is this a fully stable build of safestrap?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
safestrap is stable. cm10, on the other hand is not, per the bugs in the OP

antp121 said:
safestrap is stable. cm10, on the other hand is not, per the bugs in the OP
Click to expand...
Click to collapse
I understand the idea of safestrap, but I was wondering if you could gimme a quick lowdown on how to use it. I come from a droid 3 and yes safe strap came out for that but I mainly worked with CWM so I'm a lot more familiar with that. Few questions. Do I install recovery once downloaded? And I forgot what safe system is/when it should be used etc. And how to access safe strap to start flashing. All I can think of is bp tools when I think of custom recoveries lol. Thanks in advance!
Sent from my XT907 using xda premium

jarzy00 said:
I understand the idea of safestrap, but I was wondering if you could gimme a quick lowdown on how to use it. I come from a droid 3 and yes safe strap came out for that but I mainly worked with CWM so I'm a lot more familiar with that. Few questions. Do I install recovery once downloaded? And I forgot what safe system is/when it should be used etc. And how to access safe strap to start flashing. All I can think of is bp tools when I think of custom recoveries lol. Thanks in advance!
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
Ok, so in the new safestrap, make sure you're rooted, go into the app, install, and reboot. Upon booting, you will see a boot up screen with safe system disabled on it. Go into the recovery option by hitting the recovery button on that screen. You'll go into twrp with safestrap settings. Click the rom slots option in the top left. Then choose the first rom slot. Next, choose the partition size. Depending on your sd card size, pick accordingly. It'll take a little while to make the slot but it will. It should switch to that rom slot upon creation, but if not, just click on the rom slot and hit activate. You'll be able to tell because it'll say rom slot one on the top of the screen. Next, you'll have to install the rom by hitting the install button, navigating to the downloads folder, or wherever you have the rom and swiping to install. Next install the gapps and reboot. The safestrap splash screen should look a lot different and say enabled now. If you've done all this, you're golden
Sent from my XT907 using Tapatalk 2

antp121 said:
Ok, so in the new safestrap, make sure you're rooted, go into the app, install, and reboot. Upon booting, you will see a boot up screen with safe system disabled on it. Go into the recovery option by hitting the recovery button on that screen. You'll go into twrp with safestrap settings. Click the rom slots option in the top left. Then choose the first rom slot. Next, choose the partition size. Depending on your sd card size, pick accordingly. It'll take a little while to make the slot but it will. It should switch to that rom slot upon creation, but if not, just click on the rom slot and hit activate. You'll be able to tell because it'll say rom slot one on the top of the screen. Next, you'll have to install the rom by hitting the install button, navigating to the downloads folder, or wherever you have the rom and swiping to install. Next install the gapps and reboot. The safestrap splash screen should look a lot different and say enabled now. If you've done all this, you're golden
Sent from my XT907 using Tapatalk 2
Click to expand...
Click to collapse
I thank you again for your response. I just played around with it a bunch and did a full backup which is always good oh and one more quick question. It should say "safestrap disabled" now because I haven't flashed anything yet right?
Sent from my XT907 using xda premium

jarzy00 said:
I thank you again for your response. I just played around with it a bunch and did a full backup which is always good oh and one more quick question. It should say "safestrap disabled" now because I haven't flashed anything yet right?
Sent from my XT907 using xda premium
Click to expand...
Click to collapse
yup. if you wait a bit, im making a guide :3
---------- Post added at 11:06 PM ---------- Previous post was at 10:18 PM ----------
Heres the guide! http://forum.xda-developers.com/showthread.php?p=34248144#post34248144 hope it helps with any problems!

love the devs for this, only thing missing from this amazing phone was cm10

anyone tried this (full ROM version not safestrap) on Aussie Razr M (unlocked bootloader)?
Heck anyone tried safestrap on locked Aussie Razr M?

wintermute000 said:
anyone tried this (full ROM version not safestrap) on Aussie Razr M (unlocked bootloader)?
Heck anyone tried safestrap on locked Aussie Razr M?
Click to expand...
Click to collapse
Tried it on Aussie unlocked boot loader. Works fine, but it's slow as treacle. Needs optimizing to work on RAZR M properly.
Sent from my Nexus 7 using Tapatalk 2

[Nexus 4][MOD] Improve Touch Screen Sensitivity

Hey guys,
The Android 4.3 update for the Nexus 4, in my opinion, has majorly improved the touch screen sensitivity of the Nexus 4, therefore I believe this mod is irrelevant. For those who still want to use it, its still here.
Hey guys,
First of all, I would like to say thanks to trter10 who made the original thread for this. Unfortunately, that thread has been abandoned by the OP and forgotten about. Therefore, I have decided to make this thread. In fact, the mod that I made, in my opinion, is much better than the one in that thread.
As many of us, Nexus 4 users, have come to realize, the device's touch screen sensitivity is way below par when it comes to today's day and age. It has been pointed out that this is due to some changes in the latest touch screen driver from Synaptics, E027. An earlier driver, E015, had much better sensitivity and therefore downgrading to it improves touch screen sensitivity significantly.
There are two ways to downgrade the driver. The first way is the easiest but it doesn't work for everybody, such as people (like me) who use custom kernels like Franco Kernel. I don't know why it doesn't work, but that's the way it is.
First Method:
What You Need:
Root - If you don't have it, go to this thread: http://forum.xda-developers.com/showthread.php?t=2010312
A custom recovery - If you don't have it, go to this thread: http://forum.xda-developers.com/showthread.php?t=2010312
Busybox - If you don't have it, get it here: https://play.google.com/store/apps/details?id=stericson.busybox
init.d support - If you don't have, go to this thread: http://forum.xda-developers.com/showthread.php?t=1933849
What This Does:
Puts an init.d script in the init.d folder. This script will install the E015 driver on boot.
Places the driver in /system for the script to use.
Instructions:
Extract Method 1.zip.
Boot in to your custom recovery.
Install E015-TouchDriver-Mako.zip
Reboot.
Instructions to Revert:
Boot in to your custom recovery.
Install E015-TouchDriver-Mako-Revert.zip
Reboot.
Notes:
After boot, your touchscreen will be unresponsive for around 30 seconds.
After flashing a ROM, you will need to install this zip again.
I am not responsible for any damage this modification may cause.
Second Method:
What You Need:
Root - If you don't have it, go to this thread: http://forum.xda-developers.com/showthread.php?t=2010312
Busybox - If you don't have it, get it here: https://play.google.com/store/apps/details?id=stericson.busybox
Script Manager - SManager - If you don't have it, get it here: https://play.google.com/store/apps/details?id=os.tools.scriptmanager
Instructions:
Extract Method 2.zip.
Using any android file explorer, place SynaImage.E015.bin in /sdcard.
Using any android file explorer, place the E015TouchDriverDowngrade script in any location you want on your internal SD card (I placed it in /sdcard/Scripts).
Go into Smanager, navigate to the E015TouchDriverDowngrade script and press on it.
Select the following options: Fav, Su.
Press Run.
The touch screen will be disabled for the next 15-30 seconds.
From now on, on every reboot you need to perform the following steps in order to downgrade the touchscreen driver:
Go into Smanager, click on options -> Scripts -> E015TouchDriverDowngrade -> Run.
Enjoy!
Notes:
After a reboot, your touchscreen will be unresponsive for around 20 seconds because the kernel is reflashing the new touch screen driver (E027).
After selecting Run your touch screen won't work for 15-30 seconds if it does work, the old touch driver is not being flashed.
I am not responsible for any damage this modification may cause.
Enjoy!
Click to expand...
Click to collapse

Known Issues
Known Issues

FAQ - Frequently Asked Questions
FAQ - Frequently Asked Questions

Like a known issue you could say the ~30 sec delay on boot and on recovery (I know its already in notes)

Re: [MOD] Improve Touch Screen Sensitivity
@OP what is different about your zip than the original one in the thread below. Does yours work with 4.2.2 and the original does not? Is that the main difference? If so please state that in your OP. Thanks
http://forum.xda-developers.com/showthread.php?p=34987520

Monk4Life said:
@OP what is different about your zip than the original one in the thread below. Does yours work with 4.2.2 and the original does not? Is that the main difference? If so please state that in your OP. Thanks
http://forum.xda-developers.com/showthread.php?p=34987520
Click to expand...
Click to collapse
There is a difference, I'm not home right now, I'll update the OP later.

Thanks!! Does this work with other custom roms? such as http://forum.xda-developers.com/showthread.php?t=2009561

tomho529 said:
Thanks!! Does this work with other custom roms? such as http://forum.xda-developers.com/showthread.php?t=2009561
Click to expand...
Click to collapse
Yes, it should.

Re: [MOD] Improve Touch Screen Sensitivity
I noticed this after a few hours with my n4 I actually have a replacement device shipping out to me soon. Ive only have the phone for 2 days. I guess this will be fixed in Android update?
Sent from my Nexus 4 using xda app-developers app

Sv: [MOD] Improve Touch Screen Sensitivity
Confirmed working om latest cm nightly with Franco kernel
Sendt fra min Nexus 4 med Tapatalk2

bxsteve31 said:
I noticed this after a few hours with my n4 I actually have a replacement device shipping out to me soon. Ive only have the phone for 2 days. I guess this will be fixed in Android update?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Well, from 4.2.1 to 4.2.2 they didn't fix it, so probably not.

Works fantastically, thank you!
on aokp build 3 for anyone who's curious.

Will not look back!!
Works as advertised on PA 3.0 (24FEB) I can finally type a message in portrait without it making me feel like I have no clue how to type. I would consistently hit letters and they would not register, just did a test and tapped a whole paragraph with not one error. Thank you very much.

Re: [MOD] Improve Touch Screen Sensitivity
Thanks for this! Going to install this now and try if the delay is shorter. The previous one was annoying that I disabled.
Beamed from my very paranoid and harsh Nexus⁴

Got rid of the 30 second delay being a known issue since it's part of the mod and is mentioned in notes.
I will be away for a week so I won't be able to support the thread for that time, happy flashing!

Re: [MOD] Improve Touch Screen Sensitivity
Works great thanks!
Sent from my Nexus 4 using xda premium

Now how can I flash things in the recovery since it's all touch..

rockneo said:
Now how can I flash things in the recovery since it's all touch..
Click to expand...
Click to collapse
When you boot into recovery just wait a minute for the touch screen to start responding then carry on as normal.
Whats happening is the touch driver is being reflahed back to 027 one.

meangreenie said:
When you boot into recovery just wait a minute for the touch screen to start responding then carry on as normal.
Whats happening is the touch driver is being reflahed back to 027 one.
Click to expand...
Click to collapse
Thank you.

Re: [MOD] Improve Touch Screen Sensitivity
Wow this really works. None of the placebo stuff here. Really responsive now. Thanks +1
Sent from my Nexus 4 using xda premium

[ROM-AOSP] Unofficial CM10.2 (JB 4.3.1) [11/15 CM REFRESH]

Unofficial CyanogenMod 10.2 for the Kindle Fire HD 8.9
*** USE AT YOUR OWN RISK! WHILE I TRY MY BEST TO PROVIDE WORKING KERNELS/ROMS, I AM NOT RESPONSIBLE IF THIS SOFTWARE OR ANYTHING I'VE WORKED ON SUDDENLY FRIES YOUR DEVICE. ***
BEFORE YOU BEGIN MAKE SURE YOU HAVE A 2ND-BOOTLOADER INSTALLED CORRECTLY AND CAN SEE THE BLUE LOGO DURING BOOTUP:
http://forum.xda-developers.com/showthread.php?t=2128175
In this build I do not have the HBOGO or Voice Plus patches yet.
Don't use the user swapping feature yet. It's very buggy. If you do happen to create a new user and swap, to fix the crazyness that happens, just delete the new user and reboot.
Download Information:
[LATEST][11/15 BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: Download (Goo.im)
Mirror 2: Download (Crackflasher)
md5sum: 47c385ac0852997c0f1c84bda24b16cf
[08/12] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/jem/cm10.2/cm-10.2-20130812-UNOFFICIAL-jem.zip
md5sum: 76d7b3943dc6a160a27df625d689a279
[07/31] BETA CM10.2 + 3.0.50+ KERNEL
Mirror 1: http://goo.im/devs/Hashcode/jem/cm10.2/cm-10.2-20130731-UNOFFICIAL-jem.zip
md5sum: 04ebae58e0eb2b74732adc3844e6ee84
Older builds can be found in the same folder on goo.im:
http://goo.im/devs/Hashcode/jem/cm10.2/
Download Google Apps:
http://goo.im/devs/Hashcode/gapps
(For Android 4.3)
PLEASE BE SURE TO WIPE SYSTEM & DATA/CACHE (FACTORY RESET) WHEN COMING FROM AMAZON STOCK SOFTWARE.
(It's the "Wipe" button and then "System" and then "Factory Reset" button in TWRP -- this does NOT clear your sdcard space)
Be aware that the "sdcard" space has changed slightly from ICS to JB4.2. You will find your stock amazon OS files in /data/media/ or "sdcard" on the Stock OS. But CM10.1 will create a sub directory "/data/media/0" and call that "sdcard". And in TWRP it will also use "data/media/0" as "sdcard". This has to do with multi-user settings. So when placing files on the "sdcard" be sure to check both locations before wondering why that file is missing.
CHANGES:
[11/15] SElinux now included in the kernel and set to permissive. I don't recommend turning it to enforcing as I'm still debugging the "deny" messages.
[08/12] Includes a Trebuchet patch to fix the screen flip-flop when trying to drag an icon in landscape (by XDA user Wickets^)
[08/12] All new "from source" sensor driver
[08/12] Temp. disable light sensor (due to recode of sensor driver)
[07/31] First CM10.2 build
FEATURES:
3.0.50 kernel (up from a stock 3.0.21 kernel). This includes updates from Texas Instruments, Google and Kernel.org.
PowerVR Graphics Drivers: DDK [email protected] for Android (Jellybean compatible)
Updated bltsville libs to 2.2.2.0 (this is partial screen update code which enables smoother / faster screen draws)
Audio
Camera
Wifi
Bluetooth
Sensors
HWAcceleration
HD Codecs for YouTubeHD and Netflix
HDMI video out is now correct and work across several resolutions. YMMV
DEVS
BUILDING THIS ROM:
First, read through Google's Android website about "how to setup a build environment":
http://source.android.com/source/initializing.html
[ COMING SOON ]
SCREEN SHOTS:

CURRENT KNOWN ISSUES:
When long pressing icons in landscape mode to move them, etc the screen will flip upside down for a moment and right itself. This causes the action to be aborted.
Rotation selection in games is hit and miss. Some work perfectly and some like to flip the device upside down. Still debugging what is causing this.
AUDIO: Any decoder which uses Dolby surround current has a lower volume than the rest of the system (Netflix, Google Movies, etc). It's a WIP.
Sensors: Testing various sensors, gyro seems 90 degrees off, etc.
I don't have an LTE version so this is not enabled in current builds.

Are you going to keep on developing both this and the 4.2.2 ROM? Or should we switch to this ROM for the newest updates in the future?
By the way, thanks very much for all the effort you are putting in developing for and improving our devices. We all really appreciate it.

narse said:
Are you going to keep on developing both this and the 4.2.2 ROM? Or should we switch to this ROM for the newest updates in the future?
By the way, thanks very much for all the effort you are putting in developing for and improving our devices. We all really appreciate it.
Click to expand...
Click to collapse
I will probably continue with the 4.2.2 builds until I feel like this has fully caught up with them.
Some apps for instance are not compatible w/ 4.3 yet (one of the movie players).

Omg. That is all. =)
Sent from my One X using Tapatalk 4 Beta

Hashcode said:
I will probably continue with the 4.2.2 builds until I feel like this has fully caught up with them.
Some apps for instance are not compatible w/ 4.3 yet (one of the movie players).
Click to expand...
Click to collapse
Yes that is MX player not working in 4.3.

timnan said:
Yes that is MX player not working in 4.3.
Click to expand...
Click to collapse
MX player was updated yesterday.
Still not working?

Thanks Hashcode! You're than man.
BTW, if you need someone to test functionality on an LTE device, let me know. :good:

stevenmirabito said:
Thanks Hashcode! You're than man.
BTW, if you need someone to test functionality on an LTE device, let me know. :good:
Click to expand...
Click to collapse
Same here.
I am thinking about building the rom with LTE (hash says the code is all there) from the source. But I haven't used Linux from 2010 and have to setup the gear for doing this...em...

I also would like to get 4g LTE working. If you could dust off linux and put your skills to work, I am sure many will appreciate your efforts!

I am working on an experimental built for LTE users.
As soon as I get a ROM built, I'll post it up. There is a 100% chance that it's going to take quite a few tries to get it working. So not for the easily irritated.
Sent from my XT926 using Tapatalk 2

Hashcode said:
I am working on an experimental built for LTE users.
As soon as I get a ROM built, I'll post it up. There is a 100% chance that it's going to take quite a few tries to get it working. So not for the easily irritated.
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
Irritated? With you? With a ROM that didn't even have the feature previously? You underestimate us.

Hashcode said:
I am working on an experimental built for LTE users.
As soon as I get a ROM built, I'll post it up. There is a 100% chance that it's going to take quite a few tries to get it working. So not for the easily irritated.
Sent from my XT926 using Tapatalk 2
Click to expand...
Click to collapse
Thanks a lot, Hashcode! I'll be patient...

Just tried this Rom. Wiped system, dalvik and cache before. The aosp keyboard crashes as soon as the laucher is opened. Because oft this i cant type. Is this a known bug? Shall i test sth. For you @Hashcode?
Sent from my Incredible S S710e using xda app-developers app

Thanks for this ROM. It is faster than previous version with 4.2.2.
Still some issues (audio in players), but very usable for daily usage.
Thanks!

badbutz said:
Just tried this Rom. Wiped system, dalvik and cache before. The aosp keyboard crashes as soon as the laucher is opened. Because oft this i cant type. Is this a known bug? Shall i test sth. For you @Hashcode?
Sent from my Incredible S S710e using xda app-developers app
Click to expand...
Click to collapse
Double check you're flashing the right GApps.

There seems to be an issue with the 'sdcard' link under Root - It is currently pointing at /data/media/legacy instead of /data/media/0 - This is causing some issues with apps that default to 'sdcard' including TitaniumBackup. Also, there is a 'Storage' under Root that points somewhere, which is causing issues with apps that default to '/storage' for their backup.

Status of this rom on my Kindle:
- as mentioned in changelog games are slower then on 10.1
- on 10.1 and 10.2 there are ocassions the screen rotation bug is still occuring. It happens within some games and after rotating in mx player.
Thanks and keep up your excellent work.

hi,
i'm new with Kindle Fire HD. tried this rom too and i think its very good :fingers-crossed:

gapps failure
Interesting issue going on here. i upgraded to this build (10.2-20130731-UNOFFICIAL-jem, and the latest Gapps to go with it. Note that i did not do a complete wipe, as i wanted the installed apps to remain. Upon reboot, i have a notification from pretty much every app i have installed on the device that "update for "(application name) could not be downloaded due to an error. (error retrieving information from server.[RPC:S-5:AEC-0]) i ge the same error if i try to download anything from the play store also. any thoughts?
Edit: restored back to previous backup, allowed all updates to take place first, then redownloaded the rom and gapps. A quick reflash using goo manager and everything seems to be working now. @Hashcode - another fantastic rom. only issue i still have the the screen rotation when long pressing icons in landscape mode. a very small price to pay for all the awesomeness.