Database Develop

Clock Work Mod Recovery v5.0.2.6 Flashable via Odin

Hello, Everyone!
This is the latest Clock Work Mod recovery version 5.0.2.6 for Samsung Galaxy Ace GT-S5830 smartphone. So, if you have got ace (I am sure you do.. LOL!) then, follow the steps carefully to flash this custom recovery on your device.
Thanks to koush (for this recovery ) and others!!!
Disclaimer : Do This At Your Own Risk
I shall not be held responsible for any damage incurred to your device.
Warning! I haven't tested if it works. Want to be the early tester? Go ahead. But, I am pretty sure it will work fine.
Requirements
Make sure you have GB 2.3 and above firmware.
Instructions
1. Download cwm-recovery-ace.tar.md5
2. Run Odin Multidownloader for Ace
3. Select One Package option at the top left.
4. Load Copper_v1.0.ops on OPS field.
5. Load cwm-recovery-ace.tar.md5 in one package field.
6. When everything is set... put your phone in download mode (Volume Down + Home + Power button) and then connect it.
7. When Odin says Detected then you are ready to press the start button.
8. Wait till the recovery it flashed and then after Odin says PASS (in top left box) you may disconnect your device.
9. Reboot to recovery mod (Home + Power button) and enjoy new recovery. You can now flash custom roms, do nandroid backups and many more.
Hope! Everything was clear...
Happy Flashing
You can also use this CWMManager.apk app for managing this recovery... Download here
P.S. Don't forget to say thanks if this thread post is useful...

Reserved.... For future use

Can anyone help me with some of the screenshots or images for this recovery? Thanks!

Nice ,
But why Odin ?
When it's possible to flash it via recovery mode which is much simple ,safe ,time consuming
So no need of Odin !

Ayushbhatiapro said:
Nice ,
But why Odin ?
When it's possible to flash it via recovery mode which much simple ,safe ,time consuming
So no need of Odin if i am right ?
Sorry if I am wrong
Click to expand...
Click to collapse
Same question..Its easier,safer and better to flash with recovery

Prawesome said:
Same question..Its easier,safer and better to flash with recovery
Click to expand...
Click to collapse
Ok! Got your points.... But, I thought some other might prefer using Odin rather than flashing via recovery. SO, I posted it.
Also, there is another reason, you guyz don't have clear cut instructions for CWM recovery for ace ... so it will be helpful for noobs out there.

thats great @@
will give it atry

This may help when the phone boots into download mode but fails to boot into recovery mode. After flashing this via ODIN in download mode, the recovery mode may start again. Thanks man

tj_droid said:
This may help when the phone boots into download mode but fails to boot into recovery mode. After flashing this via ODIN in download mode, the recovery mode may start again. Thanks man
Click to expand...
Click to collapse
Yup... you got some points there. After you boot to recovery then you can restore your backup and bring your phone to original state. Cheers!

could become very important when you use without having to download the official rom rom manager, and so ....
good job!

is it working waition for feedback anyway thanks and could some1 make it flashable via cwm ????????

Minioglowy said:
is it working waition for feedback anyway thanks and could some1 make it flashable via cwm ????????
Click to expand...
Click to collapse
I am sure it works since I didn't do much except making it flashable via Odin (from this one which was already flashable through CWM recovery) . You can install it from here :
http://yagyagaire.blogspot.com/2012/01/clockwork-mod-recovery-v5026-for.html

Work perfect for me. Thks!

does this works when flashed directly from old recovery of stock GB?

oh man thanks you, I search for 1 hour how to change the recovery on the S5830D of my girlfriend, it had the 3E recovery which do a fail on any cwm zip I found. When I finnally found your tar file I had a BIG SMILE. It work flawless. thanks

this CWM recovery is the same as this one
http://forum.xda-developers.com/showthread.php?t=1291327

Is it possible to have cwm 5.0.2.8 touch flashable via odin?? A friend of mine broke volume keys (don't know how) and using touch recovery he could solve his problem but he need odin to flash it..
Tapatalk Rules

I think this recovery is causing me problems. I'm having problems installing ROMs.

Sorry for stupid
sorry for stupid asking the stupid question, but where to get the Cooper_v1.0.ops file? thanks in advance

o2demonangel said:
sorry for stupid asking the stupid question, but where to get the Cooper_v1.0.ops file? thanks in advance
Click to expand...
Click to collapse
Google.
SGA S-5830 [ROM] Xperion

Clockworkmod Recovery not working!

Hello everyone,
I have a Galaxy Pop (Mini - S5570) with android version 2.3.6.
I have tried installing CWM 5.0.2.6, but all that happens is that my screen becomes illegible or in certain cases, I have booted into recovery after installing, and all it shows me is "android" and that it, it gets stuck there, and in each case, I have to install the stock firmware again.
I am hoping to install CWM to use Cyanogenmod on my device.
Please help!

asrivastava said:
Hello everyone,
I have a Galaxy Pop (Mini - S5570) with android version 2.3.6.
I have tried installing CWM 5.0.2.6, but all that happens is that my screen becomes illegible or in certain cases, I have booted into recovery after installing, and all it shows me is "android" and that it, it gets stuck there, and in each case, I have to install the stock firmware again.
I am hoping to install CWM to use Cyanogenmod on my device.
Please help!
Click to expand...
Click to collapse
you must install clockworkmod via odin if it's the first time. I think you flashed cwm via stock recovery, this causing soft-brick....

XDRdaniel said:
you must install clockworkmod via odin if it's the first time. I think you flashed cwm via stock recovery, this causing soft-brick....
Click to expand...
Click to collapse
EEK... wrong. I flashed CWM via Stock Recovery and it's still running.

F4uzan said:
EEK... wrong. I flashed CWM via Stock Recovery and it's still running.
Click to expand...
Click to collapse
wow .... really? sorry...but when i first installed cwm was via odin.... i guess it was other times...
at the time it was the only way...

XDRdaniel said:
wow .... really? sorry...but when i first installed cwm was via odin.... i guess it was other times...
at the time it was the only way...
Click to expand...
Click to collapse
that's right, CWM can only be installed via Stock Recovery and instead with ODIN ! Odin can only be used for flashing stock rom and Bootloader

Well, tbh, I just did what he said and flashed it on with Odin and it has worked normally since then.
Flashed a lower vresion of CWM with Odin first then through the recovery, upgraded it to the latest one.
Worked fine for me.

yes your suggestion reaaly work , been trying update cwm 4 to 5 through odin always get an error..

looking for a stock firmware

Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)

tsikoske said:
Hi,
my phone is currently stuck in logo and i can enter download mode only. running 4.1 jb. tried searching and all the solution given was to flash using stock fw via odin. problem is i got my 4.1.2 thru kies(i9070dxamd1 globe philippines) i tried sammobile but only 1 carrier is provided. anyone got i9070dxamd1 globe philippines there? or any link where i could download it?
thanks =)
Click to expand...
Click to collapse
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.

shut_down said:
I think that you can flash that Globe version too (just pay attention is it P or not (firmware and your phone), it is just difference in bloatware from that provider.
Try looking on samsung-updates.com too.
Click to expand...
Click to collapse
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)

tsikoske said:
its i9070 only. i found some fw in officialrom.com i think and it has same build version from live.samsung-updates.com.
the problem with my phone is that i was running twrp and a custom rom tried installing carbon over it. it was a success but then i dont like much the carbon custom rom so i tried to reflash it thru recovery. boot to recovery using quickboot(phone got a busted volume keys) i found out that twrp was replace with cwm so i wipe data/cache/factory and flash it with cocore+twrp then reboot system and it got stock in boot logo. but i can go to download mode volume down+home+power. only problem is volume up isnt working lol. so i order volume keys waiting for it to arrive so that i could install it and try to fix my phone. i still dont know yet if i could go to recovery mode.
thanks =)
Click to expand...
Click to collapse
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540

shut_down said:
You should do reboot recovery option in TWRP. But still you can't go back from CM10.2 and CM11 to stock without repartitioning /preload partition. You will get bootloop too... You must flash stock firmware or use this: http://forum.xda-developers.com/showthread.php?t=2612540
Click to expand...
Click to collapse
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon

tsikoske said:
i wasnt planning on going to stock. i was trying to install pure vanilla over carbon
Click to expand...
Click to collapse
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.

shut_down said:
You was not planning, but you must repartition that preload partition. With that script or with flashing stock firmware.
P.S. If you mean ROM Pure Vanilla - it is based on stock ROM. It is themed stock ROM.
Click to expand...
Click to collapse
oh ok. sorry my phone is fine now btw. flash with odin =)

Broken volume flex

Hi everyone I have a big big problem. My volume buttons are broken, so I can'n navigate through CWM revovery. I have cm10.2 and I want to try the kiktkat ROMs. What should I do? I tried to use goo manager but after I press "flash roms" it reboots in recovery, where I can't do anything unless reboot now. Is there a way to install TWRP touch recovery? I think of installing stock jellybean with ODIN and use a custon kernel through DD command method, but I don't know how to root without using the recovery. Any other solutions? Is there a way to install TWRP directly on cyanogenmod 10.2? Why goo manager doesen't work? Rom manager do the same thing, instead of flashing my rom, it reboots in recovery. Please help me, i'm desperate. Basicaly I want to install ROMs or TWRP recovery WITHOUT USING THE VOLUME BUTTON.

cristinel13 said:
Hi everyone I have a big big problem. My volume buttons are broken, so I can'n navigate through CWM revovery. I have cm10.2 and I want to try the kiktkat ROMs. What should I do? I tried to use goo manager but after I press "flash roms" it reboots in recovery, where I can't do anything unless reboot now. Is there a way to install TWRP touch recovery? I think of installing stock jellybean with ODIN and use a custon kernel through DD command method, but I don't know how to root without using the recovery. Any other solutions? Is there a way to install TWRP directly on cyanogenmod 10.2? Why goo manager doesen't work? Rom manager do the same thing, instead of flashing my rom, it reboots in recovery. Please help me, i'm desperate. Basicaly I want to install ROMs or TWRP recovery WITHOUT USING THE VOLUME BUTTON.
Click to expand...
Click to collapse
I think that we do not have any CM kernel that has TWRP. And you can't install separately recovery from kernel. Maybe you can do this, install CM11 kernel - it has touch CWM. When you swipe up it goes up, when you swipe down... But you must be carefull, and to get 100% working CM11 zip in your recovery, to avoid getting a bootloop. Unpack it on PC and see if zip of it is not broken,
You can install CM11 kernel by getting it from CM11 zip, copy it to the phone and use Universal Kernel Flasher from Play store. After installing it I think that you can't go back to CM10.2 anymore, you will end up with a bootloop. So you must install CM11. And another thing, I am not sure if reboot recovery works well, you will end up with nothing if it does not. So do everything at your risk, do not blame me if you fail...
We do not have working ROM manager or similar thing.

shut_down said:
I think that we do not have any CM kernel that has TWRP. And you can't install separately recovery from kernel. Maybe you can do this, install CM11 kernel - it has touch CWM. When you swipe up it goes up, when you swipe down... But you must be carefull, and to get 100% working CM11 zip in your recovery, to avoid getting a bootloop. Unpack it on PC and see if zip of it is not broken,
You can install CM11 kernel by getting it from CM11 zip, copy it to the phone and use Universal Kernel Flasher from Play store. After installing it I think that you can't go back to CM10.2 anymore, you will end up with a bootloop. So you must install CM11. And another thing, I am not sure if reboot recovery works well, you will end up with nothing if it does not. So do everything at your risk, do not blame me if you fail...
We do not have working ROM manager or similar thing.
Click to expand...
Click to collapse
So I should unpack the CM11 zip and flash the kernel in CM10.2 that I already have? If I will end up with bootloop how should I enter the recovery? The only way to do it is through reboot to recovery option in my rom, if I get stuck in the bootloop I will not be able to do anything. Can you explain one more time, step by step?

cristinel13 said:
So I should unpack the CM11 zip and flash the kernel in CM10.2 that I already have? If I will end up with bootloop how should I enter the recovery? The only way to do it is through reboot to recovery option in my rom, if I get stuck in the bootloop I will not be able to do anything. Can you explain one more time, step by step?
Click to expand...
Click to collapse
I can't guarantee that you can reboot to recovery, because sometimes it does not work. This process is risky... You can't go to download mode too after that.
1. Download CM11 zip, get boot.img from it
2. Install Universal Kernel Flasher and some root explorer
3. Install boot.img with Universal Kernel Flasher
4. Reboot recovery
5. Install CM11, do factory reset, wipe cache, dalvik cache...
I wouldn't try something like this with those risks, I will rather get my volume buttons fixed before trying this. I think chances to fail is greater then not to.

I understand now.. as you said is too risky. Can anyone help me with a method to get root on stock jellybean without using recovery or to use goo manager? I want so bad to try kitkat but I don't want to brick my phone in the process. Thank you Shutdown anyway for the help.

cristinel13 said:
I understand now.. as you said is too risky. Can anyone help me with a method to get root on stock jellybean without using recovery or to use goo manager? I want so bad to try kitkat but I don't want to brick my phone in the process. Thank you Shutdown anyway for the help.
Click to expand...
Click to collapse
I think Goo manager is not working because it is not compatible with our device. Its developer needs to make it work with our phone. So I think there is no other method for rooting except the one we have, zip file and flashing it in recovery.

Why there isn't an odin flashable method for root as for gingerbread? I am sorry for bothering you, but you are of the most experienced dev/user of our device.. My volume flex can't be fixed unless I change the motherboard wich is far too expensive compared with the value of the phone. I also have a very unstable version of cm 10.2 (I installed it like 10 months ago) so my camera doesen't work in video and I have the in call volume bug. If I just could root stock jellybean with other method, I could use twrp and install any 4.4 ROM I want. It is frustrating because I am so close yet so far..

cristinel13 said:
Why there isn't an odin flashable method for root as for gingerbread? I am sorry for bothering you, but you are of the most experienced dev/user of our device.. My volume flex can't be fixed unless I change the motherboard wich is far too expensive compared with the value of the phone. I also have a very unstable version of cm 10.2 (I installed it like 10 months ago) so my camera doesen't work in video and I have the in call volume bug. If I just could root stock jellybean with other method, I could use twrp and install any 4.4 ROM I want. It is frustrating because I am so close yet so far..
Click to expand...
Click to collapse
There is not Odin flashable root method because we got that Recovery method that is easy and does not increase binary count, and devs did not make the one for Odin. Anyway you can't go to download mode too if Volume buttons is not working. You need to press volume up to proceed...

I built a long time ago a CM10.1 kernel with TWRP recovery... CM10.2 CWM is touch recovery.
@cristinel13 Method by shut_down is perfect, but if you aren't not sure to do it do this:
I built this file for you, download it but don't extract, leave as it is
Open Odin and put that file in "PDA"
Open Terminal Emulator on your device and write first su, confirm access then write reboot download
Now your device is in download mode without need to press vol+ to confirm
Press "Start" on Odin
Let the device starts, then open again Terminal Emulator, write again su then write reboot recovery to enter in recovery. Now flash any KitKat ROM that you want

A little help? I flashed it with odin and now my phone is bricked. It boot to the samsung galaxy s advance logo and then it stops. My PC reconise it and I can charge my phone, but I can't start it. How can I enter recovery/download without the buttons? I am pretty scared right now :-s

cristinel13 said:
A little help? I flashed it with odin and now my phone is bricked. It boot to the samsung galaxy s advance logo and then it stops. My PC reconise it and I can charge my phone, but I can't start it. How can I enter recovery/download without the buttons? I am pretty scared right now :-s
Click to expand...
Click to collapse
I think that you need to do factory reset... Can you use ADB? Try to delete data/data folder in root with ADB. You can use this if you need GUI: http://forum.xda-developers.com/showthread.php?t=2105707
You can try with delete of folder data/dalvik-cache.
P.S. I forgot that you flashed just kernel, try adb reboot recovery.

The kernel worked.. I mean the battery logo when I plug it in the PC is like on in kitkat. My phone works but it won't boot up. All I need to do is to enter recovery mode, but I can't without the volume button. Can I enter in recovery with ADB? I red that I can't use ADB with the phone turned off.

cristinel13 said:
The kernel worked.. I mean the battery logo when I plug it in the PC is like on in kitkat. My phone works but it won't boot up. All I need to do is to enter recovery mode, but I can't without the volume button. Can I enter in recovery with ADB? I red that I can't use ADB with the phone turned off.
Click to expand...
Click to collapse
Try. Leave it sometime on that bootloop, and if it is possible it will give you adb access. Use reboot recovery command, like you did for download mode.
Sent from my GT-I9070 using Tapatalk

cristinel13 said:
The kernel worked.. I mean the battery logo when I plug it in the PC is like on in kitkat. My phone works but it won't boot up. All I need to do is to enter recovery mode, but I can't without the volume button. Can I enter in recovery with ADB? I red that I can't use ADB with the phone turned off.
Click to expand...
Click to collapse
Oh right, kernels compiled on 4.4 can't start on 4.2-4.3... Sorry, I forgot that, do you have at least a very little knowledge about hardware? If yes, we can use a "pro" method that will 101% work to enter in recovery
shut_down said:
Try. Leave it sometime on that bootloop, and if it is possible it will give you adb access. Use reboot recovery command, like you did for download mode.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
Unfortunately to have ADB on boot you need to modify default.prop inside boot.img's primary ramdisk, and he can't actually flash again...

You cand explain the method to enter in recovery, I will give it a shot.

cristinel13 said:
You cand explain the method to enter in recovery, I will give it a shot.
Click to expand...
Click to collapse
In terminal emulator get superuser request nd then type 'reboot recovery' then u r good to go...........

kamalnath93 said:
In terminal emulator get superuser request nd then type 'reboot recovery' then u r good to go...........
Click to expand...
Click to collapse
I don't know why usually someone doesn't read previous messages in a thread. He can't actually boot his ROM, so no terminal emulator

[Q] Stock Recovery Flashing Zip Fail

My device is GT-N7000, using N7000ZSLR1 Android 4.1.2 stock ROM （Build number：JZO54K.N7000ZSLR1）, used Chinese one key root app to root but unrooted to go to stock recovery to flash the newest Philz recovery (because Odin v3.09 failed to flash it), but fail like below screenshots:
　　　　　　　　　　
I wonder why, I downloaded from the official platform (https://goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/), and my internet is good so there should be no corrupted files. All stuffs are stock now, so I dunno why.
(Additional info:　If I flash "PhilZ-cwm6-XXLTA-ATL-5.15.0.tar.md5" using Odin, it works, but I want to use the latest Philz recovery, plus, the recovery will switch back to stock one after usage, that means after I press "reboot system now" in Philz recovery XXLTA-ATL-5.15.0, and power off and go to recovery mode again, it's the stock one. Dot't say something like "Oh flash this one then").

Duplicate.. I guess.

nokiamodeln91 said:
Duplicate.. I guess.
Click to expand...
Click to collapse
Yes I duplicated by mistake, you shall reply tp this thread that has title though...