Database Develop

how to get to recovery?

Hi,
I was wondering how can I get my phone to recovery to update ROM? Basically I've flash my firmware now trying to to get recovery.
Vol up + home + power doesn't seem to work for me.
I've tried downloading the adb from modaco and it just says: error device not found.
I'm stuck as to what to try out any help would be much appreciated.
Thank you

try vol down button plus recovery when usb is plugged into your machine running odin.

NeoXTC said:
Hi,
I was wondering how can I get my phone to recovery to update ROM? Basically I've flash my firmware now trying to to get recovery.
Vol up + home + power doesn't seem to work for me.
I've tried downloading the adb from modaco and it just says: error device not found.
I'm stuck as to what to try out any help would be much appreciated.
Thank you
Click to expand...
Click to collapse
adb should work, you probably don't have the correct drivers installed. But your combination is correct. Try holding them for longer. Remember the phone must be off when you do this.
@lgkahn: he's already done the Odin stuff, vol. down gets you in the download mode, not recovery. He's now trying to install an update.zip...recovery is what he wants.

nope doesn't work I'm gonna try a different pc now

NeoXTC said:
nope doesn't work I'm gonna try a different pc now
Click to expand...
Click to collapse
When you say it doesn't work, what happens? Are you keeping all 3 buttons pressed?

Yeah I've pressed all 3. I've tried adb reboot recovery on different machine now and it doesn't work says "error: device not found"
man this suck

ok I got this working. I did the 3 button recovery whilst the device is connected to pc. looked at video tut again. It works now
yay, rooted and r2 ROM pain in the butt to get to recovery though

NeoXTC said:
ok I got this working. I did the 3 button recovery whilst the device is connected to pc. looked at video tut again. It works now
yay, rooted and r2 ROM pain in the butt to get to recovery though
Click to expand...
Click to collapse
Btw, did you have USB debugging enabled on your handset? 'adb devices' will not see it otherwise...

No I haven't tried that totally forgotten about the debug mode. But one thing though running adb or kies (still trying to figure it out) screws up my keyboard as in it becomes unresponsive
Will keep playing

i only got recovery to work after removing the battery for 10 sec.

[q] galaxy s tweak app froze my phone

my phone has been frozen at the samsung i9000 screen ever since opening this app.... i am very new to this do not understand most concepts here.. ie. flashing a rom. If anyone can help me get my phone out of this state or has any suggestions on how i should fix this please comment.

if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)

What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.

krtken said:
if you can get into recovery mode try flasing another rom via cwm or flash it using odin and download mode (flashing non wipe roms via cwm might leave your apps and data intact)
Click to expand...
Click to collapse
i can get in recpvery and download mode but have no clue really how to flash a rom.. i have odin and a few otehr files but i cannot get this back to normal.

Tehpriest said:
What is the full name of the app? How did you try using it? Do you know what firmware version your phone is on?
First thing to try is turn off, remove battery sim and any microSD. leave five minutes and put all back in and turn on.
Click to expand...
Click to collapse
the app is galaxy s tweaks or something very simalar (black and white logo) the two options i was given in the app were "YES-BREAAAAK my phone" and "NO- Im not crazy" i selected no and then my phone just reset and wouldnt turn on again ive tried everything i can do without hooking up to a comp ( as far as i know) but thx for the advice

Where did you get this from? It does not seem to be in the market.

OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.

Tehpriest said:
OK just found it. Have a read off all the comments. Not good.
http://www.appbrain.com/app/gst-(galaxy-s-tweaker)/com.pommedeterresautee.lagfix
You could try restart holding Home Vol up and Power button then choose Clear cache and Factory reset.
or
Try restart the phone holding home Vol down and press power button to get into recovery mode. then plug in and open Kies go to tools and firmware recovery.
Click to expand...
Click to collapse
Is telling me i need recovery code, I have never received one.

Just read this so it may work for you.
disconnect the phone from USB, pull the battery, replace it, boot into recovery mode and reconnect the phone. Go back to Kies and tools firmware recovery.
In other words repeat what you have done :-s
Original post on Android Forums.
The message indicated that I would need a recovery code that could be obtained later by clicking Tools | Firmware Emergency Recovery Menu.
I was then instructed to disconnect the phone, pull the battery, boot into recovery mode and reconnect the phone which I did. The phone would not reconnect. At this point I called Samsung tech support and wasn't impressed when I was simply told to repeat the procedure. But to my surprise, the upgrade was successful the second time around. Go figure! Anyway, I was wondering if anyone else ran into the recovery code message.
Click to expand...
Click to collapse

After flashing the 2.3.3 GB.....

Ever since I have flashed 2.3.3 I've been having problems.
-Download mode can only be accessed from adb reboot download
-The only way I got drivers to recognize in download mode was to install them from Samsung Kies mini.
-No button combination works to get into download mode, it takes you to recovery mode every time.
-My four touch button lights will not shut off after turning phone off and vibration confirming shut down.
Once I finally got it back to 2.1 stock via Odin one-click, I used Kies mini to upgrade to 2.2. I still have these same problems, all which started happening after I upgraded to the 2.3.3 SamFirmware leak. Not only have I been reading these problems from this leak but from other roms using 2.3.3.
To clarify, I am not blaming anyone, I am simply looking for a fix or to be told that I have done something wrong. Anything will be appreciated, thanks.

Jmurph3 said:
Ever since I have flashed 2.3.3 I've been having problems.
-Download mode can only be accessed from adb reboot download
-The only way I got drivers to recognize in download mode was to install them from Samsung Kies mini.
-No button combination works to get into download mode, it takes you to recovery mode every time.
-My four touch button lights will not shut off after turning phone off and vibration confirming shut down.
Once I finally got it back to 2.1 stock via Odin one-click, I used Kies mini to upgrade to 2.2. I still have these same problems, all which started happening after I upgraded to the 2.3.3 SamFirmware leak. Not only have I been reading these problems from this leak but from other roms using 2.3.3.
To clarify, I am not blaming anyone, I am simply looking for a fix or to be told that I have done something wrong. Anything will be appreciated, thanks.
Click to expand...
Click to collapse
I asked this over in other thread too buddy. What are the key combos u have tried?

watsa said:
I asked this over in other thread too buddy. What are the key combos u have tried?
Click to expand...
Click to collapse
I have tried the 3-buttom combo - volume - and + along with the power. release power when att boot logo comes up. I've even tried to hold power down and let it cycle through the boot logo a couple times before releasing it. No luck, only recovery mode.
remove battery, sim, sd card. hold both volume - and +. put in battery and Usb cable as soon as battery is in. no luck, only recovery mode.
I've even tried the i9000's download mode. I think its volume down and power...only recovery mode.
The only way I was able to get into download mode was adb reboot download. I haven't tried a jig.

Jmurph3 said:
Ever since I have flashed 2.3.3 I've been having problems.
-Download mode can only be accessed from adb reboot download
-The only way I got drivers to recognize in download mode was to install them from Samsung Kies mini.
-No button combination works to get into download mode, it takes you to recovery mode every time.
-My four touch button lights will not shut off after turning phone off and vibration confirming shut down.
Once I finally got it back to 2.1 stock via Odin one-click, I used Kies mini to upgrade to 2.2. I still have these same problems, all which started happening after I upgraded to the 2.3.3 SamFirmware leak. Not only have I been reading these problems from this leak but from other roms using 2.3.3.
To clarify, I am not blaming anyone, I am simply looking for a fix or to be told that I have done something wrong. Anything will be appreciated, thanks.
Click to expand...
Click to collapse
I got the same issue. The worse thing for me is I cannot get it back to 2.1 stock via Odin one-click because the driver can't recognize the device any more (It works fine before flashing to GB). How do you get it back to 2.1 stock?

wzeng2000 said:
I got the same issue. The worse thing for me is I cannot get it back to 2.1 stock via Odin one-click because the driver can't recognize the device any more (It works fine before flashing to GB). How do you get it back to 2.1 stock?
Click to expand...
Click to collapse
I downloaded kies mini from the samsung site. Once installed, you can find an option to install the phones drivers when the phone is recognized by kies. Odin registered my phone in download mode after that and I was able to one-click back to stock.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

I am going to try that.

I had this problem when going to a 2.3.3 rom before, sometimes it just needs a little and some tender loving repeatable connects, other times maybe just to be left alone for a day or two... I'm not sure if this will work but if you can get a com port from Odin 1 click without having to be in download mode I.e. the phone is on, try a master clear, let the phone boot up and see if you were able to get a com port again(leave it connected during boot), then do various methods to get in download mode starting with the GB method
Hope any of this helps at all
Sent from my I897 using XDA App

Try powering phone off, then while phone is off, hold vol down (just down, not up and down) and insert usb. Should give you dl mode

mrhaley30705 said:
Try powering phone off, then while phone is off, hold vol down (just down, not up and down) and insert usb. Should give you dl mode
Click to expand...
Click to collapse
You're right. It should, but if the 2.3.3 ROM is effecting everyone the same way. NO BUTTON COMBOS WORK. That's just it. You can name it, and I've tried it. It does not work. Only thing that does work is adb reboot download. I have not tried a jig, but why bother if the phone boots.

Does your volume down button work?

philhachey said:
Does your volume down button work?
Click to expand...
Click to collapse
It does, indeed. All of my buttons work. Still, I only get to recovery.
Sent from my SAMSUNG-SGH-I897 using XDA Premium App

I too am having the same problem with 2.3.3 i897UCKF1 boot loaders. I can't get into download mode or recovery. Hopefully a jig will work

Could it be Rom/Kernel issue? Im on i897UCKF1 Boot loaders with Cog 5 B3 and works fine for me. I have that issue before though the phone just didn't want to go in to down load mode for me, but it was with froyo.

brievolz84 said:
I too am having the same problem with 2.3.3 i897UCKF1 boot loaders. I can't get into download mode or recovery. Hopefully a jig will work
Click to expand...
Click to collapse
Download Android Terminal Emulator from market. Once it's installed, open it, and type su. This should have the app ask for root rights. Once you allow it, type reboot download and press the enter button on the virtual keyboard. if the phone just goes black and doesnt reboot after a short while, just battery pull and turn it back on. You can also use this method to get into recovery by substituting reboot download with reboot recovery.

Twicebak3d said:
Download Android Terminal Emulator from market. Once it's installed, open it, and type su. This should have the phone ask for root rights. Once you allow it, type reboot download and press the enter button on the virtual keyboard. if the phone just goes black and doesnt reboot after a short while, just battery pull and turn it back on. You can also use this method to get into recovery by substituting reboot download with reboot recovery.
Click to expand...
Click to collapse
Sorry for being cryptic on my initial post, this is what I'm dealing with. I can't get the phone out of phone---!---computer screen and I've tried all the button combinations.
here's what I did. I was in stock enclair and copied continuum 6.1 to the sd card. I then get into download mode to flash 2.3.3 boot loaders. That was successful so I booted back into download mode to flash the talon kernel. I changed the zip to a tar so Odin 1.83 can recognize the file in the pda section. I clicked start and odin failed (I didn't know you had to be in recovery mode to flash the kernel it wasn't listed in the instructions I had). I rebooted the phone and got the phone---!---computer screen with this message:
Firmware update failed ! Try going into Recovery mode.
Hope this helps

brievolz84 said:
Sorry for being cryptic on my initial post, this is what I'm dealing with. I can't get the phone out of phone---!---computer screen and I've tried all the button combinations.
here's what I did. I was in stock enclair and copied continuum 6.1 to the sd card. I then get into download mode to flash 2.3.3 boot loaders. That was successful so I booted back into download mode to flash the talon kernel. I changed the zip to a tar so Odin 1.83 can recognize the file in the pda section. I clicked start and odin failed (I didn't know you had to be in recovery mode to flash the kernel it wasn't listed in the instructions I had). I rebooted the phone and got the phone---!---computer screen with this message:
Firmware update failed ! Try going into Recovery mode.
Hope this helps
Click to expand...
Click to collapse
Does your computer recognize your phone as anything while you're in the phone!pc state? You could try Adam's Once-Click Unbrick.

Twicebak3d said:
Does your computer recognize your phone as anything while you're in the phone!pc state? You could try Adam's Once-Click Unbrick.
Click to expand...
Click to collapse
It sure does, odin recognizes it and the sound comes on when the phone boots
EDIT: It says I need to put it in download mode which is the problem I'm having

Did you try the OCUB I posted? It's supposed to work at that screen. Yes, it does run on Windows lol.

Twicebak3d said:
Did you try the OCUB I posted? It's supposed to work at that screen. Yes, it does run on Windows lol.
Click to expand...
Click to collapse
I just did and the phone reset and is in enclair. Now lets see if I can get Continuum to flash. Thank you so much!!

Jmurph3 said:
You're right. It should, but if the 2.3.3 ROM is effecting everyone the same way. NO BUTTON COMBOS WORK. That's just it. You can name it, and I've tried it. It does not work. Only thing that does work is adb reboot download. I have not tried a jig, but why bother if the phone boots.
Click to expand...
Click to collapse
Even though the phone boots - a jig I've found is a GUARANTEED way to get into download mode. A jig is a VERY useful tool and only costs like $8. If you plan on flashing your phone again in the future - it's certainly NOT a waste to buy one.

[Q]

Hello people,
I recently installed GalaxySense Rom (Search "oozeroo" on Google) for my Samsung Captivate AT&T, and it was working fine, until I changed a few settings, then it said it was going to Hot Boot, so the hot boot worked fine. Then, I turned off my phone and turned it back on, and it does not boot. I tried some stuff (check the Situations). My phone is stuck at "Galaxy S Cyanogen(Mod)" (Picture Included!!!)
Situation:
-No Download Mode
-No recovery mode
-Flashed this rom with rom manager (wiped dalvik cache only)
-TRIED installing Clockworkmod recovery, but wont work (not booting into recovery)
-Only an internal SD inside phone, 14 Gigs.
(Ask me for more info if needed please)
Thank you so much, and please help.
--DV

dvasavda said:
Hello people,
I recently installed GalaxySense Rom (Search "oozeroo" on Google) for my Samsung Captivate AT&T, and it was working fine, until I changed a few settings, then it said it was going to Hot Boot, so the hot boot worked fine. Then, I turned off my phone and turned it back on, and it does not boot. I tried some stuff (check the Situations). My phone is stuck at "Galaxy S Cyanogen(Mod)" (Picture Included!!!)
Situation:
-No Download Mode
-No recovery mode
-Flashed this rom with rom manager (wiped dalvik cache only)
-TRIED installing Clockworkmod recovery, but wont work (not booting into recovery)
-Only an internal SD inside phone, 14 Gigs.
(Ask me for more info if needed please)
Thank you so much, and please help.
--DV
Click to expand...
Click to collapse
What key combo are you trying for recovery? You have a JIG laying around? If not, I'd go get one regardless of how invincible you think your phone may be. Maybe you could try Adam's one-click unbrick. http://forum.xda-developers.com/showthread.php?t=1153310 I don't know what conditions need to be met for it (your phone) to be recognized, but I'd give it a shot anyway.

I am using:
take out battery, hold both volume buttons, plug in USB, then put in battery, all with both volume buttons held the whole time.
No, I do not have a jig, I want to get one though
-I do not care to erase everything I have, I tried using Odin3 one click downloader, it worked for me once, when my phone actually went download mode

dvasavda said:
I am using:
take out battery, hold both volume buttons, plug in USB, then put in battery, all with both volume buttons held the whole time.
No, I do not have a jig, I want to get one though
-I do not care to erase everything I have, I tried using Odin3 one click downloader, it worked for me once, when my phone actually went download mode
Click to expand...
Click to collapse
remove sim and microsd. You have to have your batt back in before you hold volume+- and insert USB
what recovery key combo you using?

still nothing buddy, tried your technique
thanks dude
i did try returning it, but they didnt accept it (costco), NOT because I had another romm installed... but because it wasnt booting!
-although, I do not have the battery sign show up, it just has the circle, then it goes to galaxy s screen

Twicebak3d said:
What key combo are you trying for recovery? You have a JIG laying around? If not, I'd go get one regardless of how invincible you think your phone may be. Maybe you could try Adam's one-click unbrick. http://forum.xda-developers.com/showthread.php?t=1153310 I don't know what conditions need to be met for it (your phone) to be recognized, but I'd give it a shot anyway.
Click to expand...
Click to collapse
Dont have linux

post as much as you want on this thread, i dont really care
any other ideas?

Well..... has galaxysense been actually ported to the captivate yet? I doubt this'll work but.... try vol down + home + power. You could vary vol down with vol up for recovery mode as well. Like I said.... doubt they'll work.

It has ported to captivate, there is a captivate section on website
Home button? you mean the touchscreen/virtual home button? When do you press it:when it lights up?
-btw, i tried the brick fix thing, but it didnt recognize my phone, because it was only booting

dvasavda said:
It has ported to captivate, there is a captivate section on website
Home button? you mean the touchscreen/virtual home button? When do you press it:when it lights up?
-btw, i tried the brick fix thing, but it didnt recognize my phone, because it was only booting
Click to expand...
Click to collapse
There's a reason I didn't think it'd work lol. Those are i9000 key combos lol. Get a jig imo.

what are the sgh-i897 combos?
can you go into safe mode with this?
and my home button question please?

dvasavda said:
what are the sgh-i897 combos?
can you go into safe mode with this?
and my home button question please?
Click to expand...
Click to collapse
Yeah I meant that virtual key. cappy combos are vol up/down + power for recovery mode for me.

no recovery for me
actually, at first, I had no recovery on my new rom, so... (I dont want to tell you this!) but I looked for a stock recovery, and I put it over the old recovery file in the system.

dvasavda said:
no recovery for me
actually, at first, I had no recovery on my new rom, so... (I dont want to tell you this!) but I looked for a stock recovery, and I put it over the old recovery file in the system.
Click to expand...
Click to collapse
Do you know if you flashed 3 button? try vol up vol down power. hold those while inserting usb

nothing dude yet, i did not flash the 3 button fix, (oops!)
i did notice that, when the phone is booting up, and I connect, the phone is half recognized with computer, and yes I did install drivers.
If i go to device manager, it says Captivate, but with a yellow exclamation mark

have to go to, talk to you tommorow morning!
thanks buddy, i appreciate it!

dvasavda said:
nothing dude yet, i did not flash the 3 button fix, (oops!)
i did notice that, when the phone is booting up, and I connect, the phone is half recognized with computer, and yes I did install drivers.
If i go to device manager, it says Captivate, but with a yellow exclamation mark
Click to expand...
Click to collapse
I wonder if it'd be recognized by ADB if you install Nexus S drivers. try using that as the drivers for the marked captivate in dev manager. http://developer.android.com/sdk/win-usb.html#
If it changes name to Android Composite ADB interface, then you can ADB into recovery and reflash. I don't see how but if you don't have a jig.... might as well try.

(just raised your thanks meter!)
can I cut off an old charger that fits the captivate, and use that?

dvasavda said:
(just raised your thanks meter!)
can I cut off an old charger that fits the captivate, and use that?
Click to expand...
Click to collapse
For a JIG? Possibly. You have to jump pins 4 and 5 with 300k worth of resistors. if you look in my sig, there's also a guide to just making one without a USB. Regardless of how you apply the resistance to your phone, you still need 301k. There is a window. I've seen 294k jigs work, so just as long as resistance is in a certain range across those two pins, it will work.

ok, thanks
I tried adb rebooting, but says error device not found
(same thing happened when my device was working and on)

[Q] Stuck on LG logo after CM7! help!

I recently installed CM7 after rooting my phone with Superoneclick and installing Clockworkmod. However, after installation of CM7, i managed to boot up the system, played around with it and realised that i needed to install the google addon as well. So i rebooted the phone to enter into CWM recovery, however the problem started.
My phone is now stucked on the LG logo screen and would not change. I left the phone in that state till the battery went dead. Recharged the phone and it remained on that screen.
Tried to connect the phone to the PC to flash it with smartflash, but it doesnt work at all. I removed the battery and held the volume down button while plugging in the usb cable. All i see is the phone stucked on the white LG logo screen.
Is there any way that i can reformat the contents of the phone or is my phone certified?
All help would be much appreciated!

Power up directly to cwm by pressing power button and volume down key at the same time.
Once in cwm, full wipe including /system and reflash cm and gapps.
Good luck.

I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?

audilogic said:
I have tried that method as well. Sorry. Forgot to mention it in my initial post. It didn't work. I have tried to pull the battery, hold down the volume down and power button for at least 20 times now. Each time i get the same screen. The CWM menu does not come up.
Any other ways?
Click to expand...
Click to collapse
Hmm.....if u can't power to cwm directly then perhaps try smartflash to any stock rom.
1. Download any stock rom
2. Start smartflash app from pc
3. In power off mode, just press volume down to boot to software update screen. Start smartflash stock rom.
4. Boot up stock rom
5. Install rom manager and flash cwm from rom manager. (Or download cwm from Rusty! Cwm thread)
6. Boot to recovery
7. Flash cm rom
8. Flash gapps

Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.

yup, tried the exact method that you suggested too. But it doesnt work. Still gets stuck at the LG logo.

Rusty! said:
Remove battery, hold both vol buttons and plug in USB. Screen should stay blank, but Windows will pick up an APX device. Now NVFlash back to stock and start again.
Click to expand...
Click to collapse
This method worked! But i have another problem, windows found an APX device, tried to install it but failed. It says driver was not found. Do i have to install a specific driver for this to work? Thanks!

Yes, good point: http://android.modaco.com/topic/335...k-rom-release-v10b-dated-1300166062-15032011/

I have managed to flash the phone and it is back working now. Thank you so much for your help rusty and temasek!

Hi, first post, hope the thread is not too old.
Unfortunately this is my best chance.
I have the same problem on my O1:
Updated from mik's beta 6.5.7 to beta 6.5.8 with the clockwork manager, at the reboot, I was stuck on lg logo.
Unfortunately usb + both volume buttons didn't work.
It remains still at the lg logo.
Pressing home + both volume, it repeately reboots.
In every case I can't go in recovery mode, so I can't wipe the system folder.
Any help will be appreciated,
thank for your time!
PS: sorry, maybe thread in p500, cm7 will be more appropriate.

hold power button + volume down button for 5-10 seconds may work, phone will reboot into recovery mode, then you are able to flash a stock rom or restore your nandroid-backup (if you made one)
good luck, hope it helps you

thanks, I saw a useful post here:
http://forum.xda-developers.com/showthread.php?p=18531050#post18531050
Then I proceded as you wrote.
Now I'm stuck at adroid logo, without the chance to wipe cache.
The recovery does not start: loading bar and then forced reboot...
I don't know what to do

nvflash
maybe you try this link
android.modaco.com/topic/335416-nvflash-setup-instructions-drivers-links-active/
Sorry, i don't get the link working, copy it in your browser, then it should work (i'm posting with my phone that's why the link is'nt correct, but it works with browser, i tried it out)

If the link doesnt work, search 'nvflash lg p990 instructions' with google, you'll see the modaco website with the instructions and the download links
Sent from my Optimus 2X using XDA App

Thank you. A few hours ago, I managed to make it working.
Thanks for your answers, I appreciated.

nvflash is the way to go. Always make sure to use the usb ports on your motherboard (back of your computer) and not some usb hub or so.
Had a black screen for 8 hours, not able to boot, flash, recover or anything.
Changed usb port and I was able to flash the phone again.