Database Develop

Touch screen issue.

Successfully flashes miui latest build and all of the sudden the touch screen stopped working after the reboot. the screen displays the lockscreen the bottom leds buttons lights up but no touch input whatsoever. Any idea what could be causing this? I flashed using clockwork

You sir have a dead digitizer. Unlucky ):
Sent from my Optimus 2X using XDA App

itsjoe said:
Successfully flashes miui latest build and all of the sudden the touch screen stopped working after the reboot. the screen displays the lockscreen the bottom leds buttons lights up but no touch input whatsoever. Any idea what could be causing this? I flashed using clockwork
Click to expand...
Click to collapse
Maybe just your phone is fully freeze after boot. Do a full backup, and install an other ROM, for example CM7.

Supupa could be right...the phone isn't frozen as animations and text messages still shows and the problem persist with a fresh cm7 flash also..

itsjoe said:
Supupa could be right...the phone isn't frozen as animations and text messages still shows and the problem persist with a fresh cm7 flash also..
Click to expand...
Click to collapse
if you're under warranty ask for a replacement. you should get one back at no cost since there should be no signs of damage
if not. i replaced my digitizer a couple of mouths ago, its no to hard. i did post a thread in the general section which did have a few videos about replacing it. good luck

Try flashing another ROM? I don't think it's a hardware issue if the buttons light up when you touch the screen.

[Q] what is SOD (screen of death)

i had problems with variouse custom roms, with some roms i had the issue that my screen went brighter and brighter and then it was white and not funtional so is that screen of dead ???
or what is sod ?
thanks in advance

nofx161 said:
i had problems with variouse custom roms, with some roms i had the issue that my screen went brighter and brighter and then it was white and not funtional so is that screen of dead ???
or what is sod ?
thanks in advance
Click to expand...
Click to collapse
I've had that issue but I reckon its not SOD. SOD is when your phone just won't light up after locking it. Home key, power button, nothing would help and you have to restart it in order to get it work again.
Sent from my GT-N7000 using XDA

so u had the same issue with ur screen that it turns white ????
i figured my screen is broken or something

nofx161 said:
so u had the same issue with ur screen that it turns white ????
i figured my screen is broken or something
Click to expand...
Click to collapse
I used to. I think I was on stock ICS maybe. It would slowly glow whiter and whiter. Then when I press the power button a couple of times, it would get normal.
Sent from my GT-N7000 using XDA

try to factory reset or install other rom. if it continues, then you have problem with your screen. you should bring it to samsung customer care.

Screen randomly glows when screen is switched off

Hey on my Xperia Z stock rom nothing flashed, when it is in standby (screen off) randomly the screen glows and does not stop, like the screen is still off but it's like the back light has come on? is this normal? seems to be a power wasting thing to me. unless i look at it from a slight angel (during the day) i can not actually tell it's on, i'm assuming this is why my screen is using 60+% of my battery is there a fix for this?

Are you using any power saving mode?
Sent from my C6602 using xda premium

gm007 said:
Are you using any power saving mode?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Stamina mode.

I have the exact same thing happen, and it is definitely a pain as like you say you can only notice it when looking at an angle, and as I have a flip case on mine I only notice while charging. It is just a case of pressing the power button twice to turn off but that is obviously only when you notice it's doing it! lol
I use stamina mode on mine (which is great) but not sure if this is anything to do with the backlight being left on as it only does it sometimes?

I had this issue when i first got my phone ,and not anymore.Not sure how it solved cause i did lot of factory reset and flashing firmwares.
Are you using light flow or any third party apps?
Sent from my C6602 using xda premium

I get this too. I get it when it's locked and it comes back on. Also when I unlock the screen sometimes this happens and I have to turn the screen off and on again to fix it.

Happening here also but not often. I thought it was low battery mode but happens when it's disabled as well.
[email protected] from XDA premium

No i'm not using any third party light apps, seems like this may be an actual bug if multiple people are experiencing it
I have only done one reset/repair to fix the LED notification light bug.

Hope this helps
I know how to fix this. I have an xperia z1 so im not sure if my problem is the same but i use my phone as an alarm so i notice at night the screen is glowing while its standby. If you go to settings or maybe you have it in quick settings go to brightness and deactivate "adapt to lighting conditions" then it should be a black screen woth no glow in standby mode

[SOLVED] Weird screen off/lock screen bug?

My missus' 4x has the latest cm10.1 release and werewolf kernel installed.
When she presses the power button to lock the screen it goes off, then weirdly lights back up on the lock screen until it times out to black again.
Anyone know how to stop this weird extra lighting up glitch?

Ben36 said:
My missus' 4x has the latest cm10.1 release and werewolf kernel installed.
When she presses the power button to lock the screen it goes off, then weirdly lights back up on the lock screen until it times out to black again.
Anyone know how to stop this weird extra lighting up glitch?
Click to expand...
Click to collapse
Sounds like a wakelock issue - might be worth checking a logcat.

Ben36 said:
My missus' 4x has the latest cm10.1 release and werewolf kernel installed.
When she presses the power button to lock the screen it goes off, then weirdly lights back up on the lock screen until it times out to black again.
Anyone know how to stop this weird extra lighting up glitch?
Click to expand...
Click to collapse
SimonTS said:
Sounds like a wakelock issue - might be worth checking a logcat.
Click to expand...
Click to collapse
Not wakelock.
Issue 1: CRT Animation is derped, go to settings>Display>CRT Animation OFF.
Issue 2: Dodgy Hardware and Lock button is registered as a double press (Unlikely)
Isuue 3: Just Bad Rom in general, a video wouldve been nice thou tbh, bad explination.
Issue 4: In security have power button instantly locking the screen.
Soloution, install XPOSED FRAMEWORK, install XBLAST TOOLS, play with the settings a bit idc, find CRT animation and select remove alltogether.

I've just changed the animation, so I'll see how that goes first! Thanks!
Sent from my Nexus 5 using Tapatalk

Ok option 1 didn't work! I'll try option 4 and xposed later today
Sent from my Nexus 5 using Tapatalk

I noticed the same problem today after i flashed OP 2.7.. I turn the screen off, the CRT animation shows but after that, for about a second, there is like a dimmed light on the screen and then it dissapears.. I am on Carbon 4.3. and I didnt have that issue on its stock kernel. I tryed shutting CRT animation off and in settings set "non delay" but it didnt help..

This happens to me on every ROM I try. Stock and CM.

Solved! It's an app that requires root permission but has not yet been given it! In my case it was terminal emulator! Opened it. Typed su and enter to force it to ask for root permission and gave it. No problem since!
Sent from my Nexus 5 using Tapatalk

Anyone have screen flickering issues with their HD?

My HD (running 10.1.3 stable) has just started behaving strangely when I wake it up from sleep. The screen will flash then go black. Whether I push the Nook button or the power button, the same thing happens. It may do it 2 or 3 times before it comes on. Started doing this yesterday. Just now, it would not come on at all. I see the screen for a half second, then it goes black. Just wondering if it's already toast or if this is a known problem with a remedy.

Probably software issue.
If your using a magnetic case (problem)
You could try disabling the lockscreen if its enabled.
Daydream could in my theory affect that time frame.
The backlight should last years longer. The gpu should as well. I can't think of any other hardware issue.
If you have an sdcard try cm11 [or the bn rom] and see what happens. OR full backup of current rom in cwm and flash cm11 to internal. Clean and restore 10.1.3 and be back to right where you left off.

lmacmil said:
My HD (running 10.1.3 stable) has just started behaving strangely when I wake it up from sleep. The screen will flash then go black. Whether I push the Nook button or the power button, the same thing happens. It may do it 2 or 3 times before it comes on. Started doing this yesterday. Just now, it would not come on at all. I see the screen for a half second, then it goes black. Just wondering if it's already toast or if this is a known problem with a remedy.
Click to expand...
Click to collapse
Yes I have the same flickering issues when trying to wake it up from sleep. I would have to press either button numerous times to get it to stay on and not black out. I'm on the same 10.1.3 stable. I am using a magnetic case but it happens without it. Before this happen, my slide to unlock screen would act up by not unlocking when I slide to unlock; it would just go back to the initial lock screen. Slide to unlock would not work so I turn off the lockscreen, now experiencing blackout screens when I try to wake it up by pressing either buttons. This problem happens infrequently but it is annoying.

kinvid said:
Yes I have the same flickering issues when trying to wake it up from sleep. I would have to press either button numerous times to get it to stay on and not black out. I'm on the same 10.1.3 stable. I am using a magnetic case...
Click to expand...
Click to collapse
I learned from another post that if it does not awaken when the magnetic case is opened the first time, close and open it again. This works for me 95% of the time. Sometimes there's 2 or 3 second lag but it almost always comes on.
Sent from my Nexus 7 using XDA Free mobile app

lmacmil said:
I learned from another post that if it does not awaken when the magnetic case is opened the first time, close and open it again. This works for me 95% of the time. Sometimes there's 2 or 3 second lag but it almost always comes on.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Works like this on my HD+, too. Sometimes requires opening case cover twice, but the screen always comes on.