[Custom "Stock" ROM] [CWM] [P6800 GSM/3G] XXLQG ICS
** UNSUPPORTED & DEVELOPMENT CEASED **
PLS VISIT THE P6800 SKYHIGH ROM THREAD FOR CURRENT XXLQG PRE-RELEASE DEVELOPMENT
P6800 GSM/3G VERSION ONLY
*** Powered by SuperSU, so Please support SuperSU Pro ***
* I am the creator of SkyHigh ICS ROMs for both P6800 & P6810 models and have decided to spare some of my valuable time to release this custom "stock" firmware. I DO NOT USE THIS DEVICE, and rely on YOU to give constructive feedback and let me know how you went. It is up to you (P6800) users to give feedback if the ROM actually boots, init.d support is working, root and busybox installed and works as it should. Data wipe is highly recommended.
Further customisations, bug-fixes etc are supported in my SkyHigh series of ROMs in this forum. NO ETA.
* You may modify this ROM for personal use, but I will not answer posts or PM’s regarding any related issues to this other than those included with the CWM.zip . I just don't have the time to debug your own mods or others such as PimpMyROM without device, and in any case, they should be posted in the appropriate thread.
'Nuts & Bolts’ :
✔ Android ICS 4.0.4
✔ Custom "Stock" : Official Samsung firmware P6800 XXLQG
✔ Stock kernel
✔ Fully Deodexed
✔ Root
✔ Zipaligned
✔ SuperSU v1.25
✔ Busybox
✔ Init.d script support without the need for a custom kernel
✔ Data/app functionality
✔ Auto wipe : system, cache, dalvik-cache & preload
✔ Apps included :
+ All stock apps and bloatware are included
+ Titanium Backup
+ SuperSU NoNag
* Installation instructions, Credits & Download in Post #2
.
Installation - Credits - Download
How to Install :
Disclaimer: Flash this ROM at your own risk. However unlikely, YOU are solely responsible for any potential damage to your device or data. Do not flash unless you know what you are doing, are capable of reading, following instructions and using ADB or Odin to help recovery of a soft brick.
1. Require a custom recovery such as CWM or TWRP
2. Backup User apps and data with Titanium Backup Pro app or other method
3. Save ROM to internal sdcard
4. Boot into custom Recovery
5. NANDROID BACKUP & KEEP COPY ON PC !!
6. Avoid BRICK-BUG (thanks to Androguide.fr) : If you do not have THE SAME BASE currently installed, complete ALL Step #6 (a-d) before proceeding
a) Do NOT wipe anything
b) Flash the this XXLQG
c) Reboot recovery
d) Factory Reset7. Flash this XXLQG and reboot
8. Be patient, first boot will take a while !
9. Initial setup & check install “unknown apps” in phone settings
10. Restore User apps and data from Titanium, Wi-Fi settings etc (GREEN & YELLOW normally OK)
11. DO NOT restore any SYSTEM apps or data in RED colour with Titanium Backup
12. Reboot, setup accounts (if not restored in Step #10/11) & allow the ROM to “bed in”
* If you experience any issues with the ROM, Factory Reset & flash immediately ROM again and check BEFORE doing anything else
* I don’t have the time to help posts in this thread unrelated to the ROM and if you have not followed any of the above instructions!
Credits & Thanks : PM me if I’ve missed anyone out or need to add anything, apologies
* If you “thank” me, please drop by on the below links and also “thank” those that have also contributed
XDA, all the Dev’s, Modders, Themers & Users !!
Dsixia : Android Kitchen
Samsung & Google : base firmware
DooMLoRD : generic init.d support without kernel
Dev-Host : For the Premium account to host these builds
fred be_9300 : Force Close "Partial" Fix (adapted for P6800 by me)
Chainfire : SuperSU
Don't forget the THANKS button, it's free, same as the ROM and my time
** ↓↓ XXLQG Download Below ↓↓** : P6800 GSM/3G VERSION ONLY
>> XXLQG is HERE <<
.
Reserved again
Waiting for the upload, thanks a lot for your time and effort
Download link is now up in Post #2
Please be patient, first boot could take a while.......
Fingers crossed
Re: [Stock ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
May i ask why we need this firmware, whats the different between this and the other stock you posted? It sems to me all stock firmware are the same arent they
Sent from my GT-P6800 using xda app-developers app
Re: [Stock ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
long6688 said:
May i ask why we need this firmware, whats the different between this and the other stock you posted? It sems to me all stock firmware are the same arent they
Sent from my GT-P6800 using xda app-developers app
Click to expand...
Click to collapse
If you have to ask, you don't need it....
Samsung have released the base firmware with a much higher changelist, meaning, probably some bug/exploit fixes and other "under the hood" improvements.
I don't understand. What "other" "stock" firmware are you referring to? Where? As far as I know, the ROM in Post #2 is the only P6800 XXLQG custom "stock" ROM do far......
Just because a ROM isn't ASOP etc, doesn't mean it's stock.
Technically, even this ROM is not stock, it is a custom (modified) ROM. Is based on stock official firmware (unmodified). I just call it "stock" so Users won't be confused with custom SkyHigh ROMs which have a plethora of mods/tweaks and options.
Edit: ok, edited some description to include the word "custom"...
.
Sent from my GT-I9300 using xda premium
The other stock he is refering to is your sky 3.6 high rom...
What is the difference between Skyhigh and This new version.Any difference in Wifi?
Re: [Custom "Stock" ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
MRBR7 said:
The other stock he is refering to is your sky 3.6 high rom...
What is the difference between Skyhigh and This new version.Any difference in Wifi?
Click to expand...
Click to collapse
BTW, the other ROM you refer to as "stock" is far from it
Read explanation in above post and compare OP "Nuts & Bolts" !
Sent from my GT-I9300 using xda premium
Just flashed, and it all seems good!
1. Does it actually boot? Yes.
2. Use a root checker app and see if root access & busybox installed ok. (you may need to run SuperSU first and "update binary", if asked) Root OK, no need to update binary.
3. Does the init.d support work? Check log in data/local/tmp (from memory....) Don't know how to check. No log file in that folder...
4. Normal expected functions as released by Samsung: None found yet.
5. ROM or firmware "bugs": None found yet
Re: [Custom "Stock" ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
longice said:
Just flashed, and it all seems good!
1. Does it actually boot? Yes.
2. Use a root checker app and see if root access & busybox installed ok. (you may need to run SuperSU first and "update binary", if asked) Root OK, no need to update binary.
3. Does the init.d support work? Check log in data/local/tmp (from memory....) Don't know how to check. No log file in that folder...
4. Normal expected functions as released by Samsung: None found yet.
5. ROM or firmware "bugs": None found yet
Click to expand...
Click to collapse
That's for the feedback.
3. Use a root type explorer app and check to see if you have a 99test in your system/etc/init.d folder?
It should (if working) write a log to data/local/tmp/init.d_log_test.txt
If you open the log, and see the word "done", and is (should be) written every boot
Sent from my GT-I9300 using xda premium
Hi UITA!
I was wondering if it would be a good idea to install your custom stock ROM with Mobile Odin, just to preserve root:
Thanks for your work
Re: [Custom "Stock" ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
Lssar said:
Hi UITA!
I was wondering if it would be a good idea to install your custom stock ROM with Mobile Odin, just to preserve root:
Thanks for your work
Click to expand...
Click to collapse
Packaged only as CWM flashable zip.
As per installation instructions ; require a custom recovery to flash.
You will not lose root during the flashing process....
Sent from my GT-I9300 using xda premium
UpInTheAir said:
That's for the feedback.
3. Use a root type explorer app and check to see if you have a 99test in your system/etc/init.d folder?
It should (if working) write a log to data/local/tmp/init.d_log_test.txt
If you open the log, and see the word "done", and is (should be) written every boot
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Found the 99test file, but unfortunately there is no log file...
Edit: ROM seems quite good. No bugs discovered except one: some times my screen goes all black while using the tab. Don't know what triggers it. It stays like that for maybe five seconds before it comes back to life on lock screen. However it chops screen (image displays portrait although tab is landscape).
I also miss your tweaks - Skyhigh 3.6 is way more responsive and snappy
رد: [Custom "Stock" ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
Welcome back man
أرسلت من GT-N7100
Re: [Custom "Stock" ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
flashed and working perfectly !
thx man
Sent from my GT-P6800 using xda premium
Re: [Custom "Stock" ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
longice said:
Found the 99test file, but unfortunately there is no log file...
Edit: ROM seems quite good. No bugs discovered except one: some times my screen goes all black while using the tab. Don't know what triggers it. It stays like that for maybe five seconds before it comes back to life on lock screen. However it chops screen (image displays portrait although tab is landscape).
I also miss your tweaks - Skyhigh 3.6 is way more responsive and snappy
Click to expand...
Click to collapse
If you haven't already;
1. Please factory reset in recovery
2. Followed by immediately flash ROM
3. Reboot
4. Don't restore anything
5. Check & test again
Unfortunately, if these issues aren't same for all, and I can't determine the error by sight, there will be no SkyHigh ROM v4.0 using XXLQG firmware, and also put this ROM "to the sword".
Thanks
Sent from my GT-I9300 using xda premium
UpInTheAir said:
That's for the feedback.
3. Use a root type explorer app and check to see if you have a 99test in your system/etc/init.d folder?
It should (if working) write a log to data/local/tmp/init.d_log_test.txt
If you open the log, and see the word "done", and is (should be) written every boot
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I flash this ROM,It works fine,thanks.
99test in system/etc/init.d folder is just there.and the log in data/local/tmp/init.d_log_test.txt is "done".
Re: [Custom "Stock" ROM] 09MAR [CWM] [P6800 GSM/3G] XXLQG ICS
tzm0510 said:
I flash this ROM,It works fine,thanks.
99test in system/etc/init.d folder is just there.and the log in data/local/tmp/init.d_log_test.txt is "done".
Click to expand...
Click to collapse
Thank you.
Please let me know if you have any screen issues such as posted previously by longice or any other feedback
Sent from my GT-I9300 using xda premium
thanks for posting this, would you recommend this rom over your skyhigh rom though?
Related
IMPORTANT: Flash this ROM at your own risk. Neither myself nor the XDA Forum assume any guarantee or liability for any damage!
Samsung Galaxy Note 10.1 GT-N8010 WiFi
Deodexed Stock Rom
This is a deodexed stock rom for the GT-N8010. It is full stock with no removed apps. No apps have been added apart from SuperSU. CSC used is N8010XSAALG3 (modified so that it doesn't remove the Music or Video Hubs).
Info:
Android OS version : 4.0.4
Device : p4notewifiww
Model : GT-N8010
ROM Name : IMM76D.N8010XWALG4_SBNZ_1.0
Rooted (Superuser.apk + su) : YES
Rooted (unsecured boot.img) : YES
BusyBox installed : YES
BusyBox run-parts support : YES
Apps2SD (Apps to EXT) enabled : NO
/data/app enabled : NO
Custom boot animation allowed : YES
Nano text editor installed : YES
Bash shell support : YES
/system/framework is deodexed : YES
/system/app is deodexed : YES
radio.img found : NO
ROM will wipe all data : NO
Deodexed
Rooted with su binary and SuperSU app (v0.96)
Busybox Installed
Nano text editor installed
Bash Shell support
Zipaligned
Custom boot animation support
Zipaligned
Credits to:
Zedomax and his HighOnAndroid "Flyin' High" ROM
(used his updater-script as a reference so that I could modify mine so that my ROM would actually Install!)
Samfirmware.com (my Source for the original factory ROM)
The XDA Forum
Chainfire for the SuperSU
Dsixda - dsixda's Android Kitchen
Needed for flashing:
Galaxy Note 10.1 (GT-N8010)
ClockworkMod installed. EDIT: see this link for installation instructions: http://forum.xda-developers.com/showthread.php?t=1831152 . Use Method 2.
Instructions for flashing:
1. Download ROM (Link at end of Post)
2. Transfer SBNZ_1.0.zip on to Galaxy Note sdcard
3. Reboot into CWM Recovery
4. MAKE NANDROID BACKUP
5. Full wipe not needed if coming from Samsung stock rom; Full wipe recommended if coming from a custom rom.
6. Wipe Cache and Dalvik Cache
7. Install ROM zip
8. Reboot (First boot will take a bit longer than usual)
ROM Download Link:
http://www.4shared.com/zip/gllv6o9p/SBNZ_10.html
Reserved
Nice work thanks. Can I use the N8000 root method on the N8010?
Great work. Gonna flash this after school today.
Nice woork - at last
And why you didn't use newer rom ( N8010XXALH2 ) ?
dr9722 said:
Nice work thanks. Can I use the N8000 root method on the N8010?
Click to expand...
Click to collapse
If you mean the method used in this thread: http://forum.xda-developers.com/showthread.php?t=1831152 then yes, I used "Method 2 - ClockworkMod Recovery" on my original tablet firmware.
Finally there is a N8010 ROM...
Thanks!
mirek190 said:
Nice woork - at last
And why you didn't use newer rom ( N8010XXALH2 ) ?
Click to expand...
Click to collapse
Only because it's the one my Note came with. I live in New Zealand.
Sent from my GT-N8010 using Tapatalk 2
Why do all the devs use superSU these days. Whats wrong with good old fashoned superuser :crying: lol
But thanks, this is just what i need to put on my shiny new N8010. Keep up the good work
Hi
ROM looks great, does your kernel include iPtable support? I need to use a global proxy app.
Ben
Yay. Thanks a lot for this.
Sent from my GT-I9300 using Tapatalk 2
benpaddlejones said:
Hi
ROM looks great, does your kernel include iPtable support? I need to use a global proxy app.
Ben
Click to expand...
Click to collapse
The kernel is just the stock kernel so I'm not sure. You could try iptables (beta) from the Play Store and see how you go.
Sent from my GT-N8010 using Tapatalk 2
Silverblade.nz said:
The kernel is just the stock kernel so I'm not sure. You could try iptables (beta) from the Play Store and see how you go.
Sent from my GT-N8010 using Tapatalk 2
Click to expand...
Click to collapse
No luck with either. May have to wait for CM to add GT-N8010 to the tree
Ben
Is the lag with the keyboard popup when going back to homescreen fixed?
Cus that was the only thing that annoyed me on the original 4.0.4 from samsung
Greets Vauvenal7
Sent from my HTC MyTouch_4G_slide
Hi folks,
as promised, here is final version of RocketROM...no further support, no addons, no more development on this!
I would like to thank some people first:
Phil3759 for the Kernels
rupiahvn for XXLS6 and being a great guy!
reqdi for XXLS7
bangsti for his friendship, his support and mirrors!
ianbbaa for airview fix
Robbie Hood for airview fix in Gallery
not-i for multiwindow for all apps
_SVA_ for extended settings base and parts of his deodexed ROM
hypergamer1231, sbasil and lots of others for support and bugfixing
all xda devs and modders for their work and all I forgot to mention...
Changelog ROCKET ROM-v3 final-XXLS7:
based on leaked XXLS7 Firmware
Modem XXLS3 (from leaked XXLS6)
deodexed, zipaligned and rooted
rooted Stock Kernel from XXLS7 (thanks phil)
added 3 Way Reboot Menu
SmartRotation from Note 2 enabled
multiwindow for all apps (thx not-i)
no FC in Calendar Widget
added Toggles on Lockscreen
native CallRec enabled
added 'no ascending ringtone'
SMS and MMS removed from call log
disabled auto convert SMS in MMS and set number of recipients to 200
SVoice-App added (you have old SVoice in ROM as well...delete better old SVoice and disable doubleclick in new SVoice ==> no more Homebuttonlag!!!)
added lots of Google stuff and useful app (installed in /data)
extended SettingsMenu
various changes to make it faster and smoother
added fix for airview, also in Gallery --> all credits go to Robbie Hood
added new gmail + other useful apps in /data (e.g. USB-Switcher, etc.)
others I forgot for now...
Download-link: http://d-h.st/qNO
Mirror 1
Mirror 2
Torrent: http://mgnet.me/hqyB
Installation:
a) coming from any deodexed XXLS7-ROM:
Wipe nothing!
Flash ROM
enjoy
b) coming from any other ROM indcluding RR v1 + v2
make sure you are on a rooted ICS-ROM or JB-ROM with CWM recovery and brickfree kernel installed
copy ROM on your USB-storage
boot in Recovery
FullWipe (also when coming from other Sammy-JB-ROM!)
Format SYSTEM!!!
flash ROM (it will reboot automatically in most cases)
enjoy
open app Super SU and update binaries
Click to expand...
Click to collapse
remaining Issues:
Zooming issue with VideoCam on 1080p-mode
minikeyboard in multiwindow mode will always write in QWERTY, even if QWERTZ or AZERTY is set as default
Click to expand...
Click to collapse
____________________________________________________________________________________________________
____________________________________________________________________________________________________
Hi guys,
it is JellyBean time
Thanks:
rupiahvn for all his sharing - this man is one of the friendliest and helpful guys I ever met here on xda!!!
reqdi for XXLS7 dump and sharing
Phil3759 for rooting kernel
Livebyte for support and helping me believe this is all true!
Click to expand...
Click to collapse
New Release XXLS7 (including multiwindow):
This ROM is complete Stock XXLS7 Samsung JellyBean from reqdi dump, Modem is XXLS1, kernel is rooted stock. It is CWMflashable and rooted and it is smooth and stable! Kernel is probably brickfree --> http://forum.xda-developers.com/showpost.php?p=33227621&postcount=1
Download-Link: http://d-h.st/9b2
Mirror 1
Old Release XXLS2:
This ROM is complete Stock XXLS2 Samsung JellyBean. It is CWMflashable and rooted and it is smooth and stable! In addtion airview fix included (not for gallery!) Kernel is probably brickfree --> http://forum.xda-developers.com/showpost.php?p=33227621&postcount=1
Download-Link: http://d-h.st/Bn5
Fixes:
Fixing Root and issue with apps moving to SD: http://forum.xda-developers.com/showthread.php?p=33279185#post33279185
Fixing SMS-App: http://forum.xda-developers.com/showpost.php?p=33250951&postcount=331
==> SMS-App (text now won't stay in input field anymore), Settings (now shows SPen-option), Root (now fully working - you might have to open SU app after flashing and update binaries --> app will do that!)
Thanks to sbasil, unhold31, hara74
Click to expand...
Click to collapse
Installation:
make sure you are on a rooted ICS-ROM or JB-ROM with CWM recovery and brickfree kernel installed
copy ROM on your USB-storage
boot in Recovery
FullWipe/Factory Reset
Format /system and Format /data
flash ROM (it will reboot automatically)
enjoy
Every Rom cook or developer can take this ROM as base without asking for permission!!!
remaining Issues on XXLS7:
minikeyboard in multiwindow mode will always write in QWERTY, even if QWERTZ or AZERTY is set as default
zooming issue in video recorder (only in 1080p mode)
bug in calendar widget: http://forum.xda-developers.com/showpost.php?p=33880038&postcount=1123
Click to expand...
Click to collapse
eybee1970 said:
reserved + ROM in upload
Click to expand...
Click to collapse
ha, FIRST!!!
waiting for your work...
This has made my YEAR!!
Refresh refresh refresh............
Sent from my GT-N7000 using xda app-developers app
Lets charge The Beast and get ready to flash haha
Sent From My NOTE
This is impressive, did not expect this before December, thanks for all the hard work.
rupiahvn
Phil3759
Livebyte
eybee
Thanks guys for all the work and dedication
Hugs
Including SMemo? Mind = Blown. Thanks to everyone working on making this Possible <3
I would hit thanks 500x if i could. Cant wait for the rom to finish uploading and flash this baby right away.
Do you have to be on ics, or can you flash from an aosp jelly bean rom?
This is just wonderful!!!
Can you add some screenshots if possible please?
Thanks.
Can o flash this when i am on jb xxls2 with phils kernel or do i have to revert to ics first?
Sent from my GT-N7000 using xda app-developers app
I am being limited to the 8 Thanks/day!
Thanks to;
eyebee
rupiahvn
Crash
Thanks for all the wonderful work you do and the willingness to share.
This is great news !!!
how did you get the rom?
it doesnt listed on sammobile....
Boonyard said:
Do you have to be on ics, or can you flash from an aosp jelly bean rom?
Click to expand...
Click to collapse
yes, you can
liron_69 said:
This is great news !!!
how did you get the rom?
it doesnt listed on sammobile....
Click to expand...
Click to collapse
Follow the discussion in
http://forum.xda-developers.com/showthread.php?t=1737939
Start from the end!
From last night till now
My work is pressing F5
This is a kind of birthday gift for me today... Thanks
hald an hour to wait until upload finished....
I'm so excited. :fingers-crossed:
MoonCocoon said:
This is just wonderful!!!
Can you add some screenshots if possible please?
Thanks.
Click to expand...
Click to collapse
Here's a video courtesy of rupiahvn https://www.youtube.com/watch?v=6JjVdOikQqM&feature=youtube_gdata_player
Sent from my GT-N7000 using xda app-developers app
Hello everyone! :fingers-crossed:
[ROM][4.1.2 JB]Ultimate N7000 XXLT4 JellyBean 4.1.2 v6 | OTA Available
The new XXLT4 Firmware for Samsung Galaxy Note (GT-N7000) is finally out.
ROM with a lot of features, mods, fix and addons!
Just read the new Changelog below!
Dedicated XXLT4 Ultimate ROM page with links, changelog, videos, screenshot and everything you need to know about this ROM!
Constantly updated!
Click!
Warning:
For donators
Who want to support with donations please make donation ONLY using Donate Button on the dedicated blog page or on my XDA-Developers signature/profile.
Do not send donations via UpdateMe app.
Thanks!
If you like my work you can offer me a beer!
Version 6 is OUT!
New XXLT4!
Download Link v6:
Mirror 1 Ultimate N7000 XXLT4 JellyBean 4.1.2 v6 - Sourceforge - ONLINE on blog page
MD5SUM: d4f054d4b7d23ddb1d20511943200fe7
OTA Updates Direct Links
HERE
OTA Updates Changelog [15/05/2013]
Costantly updated! Just click above to see.
New Changelog v6: [UPDATED 26/04/2013]
[*]ROM Based on NEW XXLT4 Firmware
[*]NEW PhilZ-cwm6 v4.93.6 with CWM 6.0.3.1 based recovery Touch and exFAT Support – Fixed for bootloop
[*]NEW Modem XXLT3
[*]Updates Over The Air – OTA UpdateMe added on Settings
Jelly Bean 4.1.2
SuperSU Added
Fully Rooted
Fully Zipaligned
Fully Deodexed
Deleted some useless apps
Added and fixed some more Build.prop tweaks for better optimization, battery life, 3G signal and network, camera, media and more…
Added some more init.d optimizations
Switched to MTP instead of Mass Storage, you can also use Mass Storage
CRT OFF Animation added
Ultimate 4 Way Reboot Options for XXLT4 (just long press power button and decide what you want to do)
Fully working Lockscreen Shortcuts (thanks to eybee1970)
Notification Panel into Settings with possibility to change Toggles order
Call Recording and No ascending ringtone
Multiwindow Hack is available for unlimited apps
SMS Hack
SmartRotation and SmartStay Enabled
Ink Effect Mod
Dedicated app to change INK Effect Colours integrated in Settings
SNote work also with productivity tools
Airview Fix Available
Airview in Gallery
Airview works on video player too
Added working Galaxy S4 S-Voice
Added new Android 4.2 keyboard
Added some utilities on settings as always
…and more and more! Just check it out!
Screenshots Here!
How to Flash Video
Thanks to hamdogg
How to flash:
Nandroid Backup before flash is highly recommended!
Load *.zip on your SD/EXT Card
Restart in CWM
Be sure you’re on SAFE KERNEL, then you can wipe
Full wipe /data/factory reset /cache and dalvik
Format /data /system and /preload
Flash the ROM
Wait some minute until your phone boot!
For people who have Unrooted phone and ICS 4.0.4:
I can show an easy way to flash it.
Just download GL_NOTECORE_HYDRACORE_v4-3b_STD.tar
Flash it with Odin 1.85, (Click PDA, choose hydracore and press Start)
After this you will have Root on your phone. Restart it and check if Hydracore Kernel is correctly installed.
Now you can go into CWM and flash the Rom.
(to go in recovery press Volume UP + Power Button + Home Button at same time until the phone is booted into CWM)
The kernel you're flashing before installing Rom doesn't matter since with v4 will be replaced by PhilZ 3.1 for XXLS7
...That's all!
Bootloops? Problems? Read this post:
What to do when experiencing bootloops
Video Reviews Collections
Who is having problem just take a look at this video made by hamdogg
Thanks to hamdogg and sorcio46
That's all. :laugh:
All feedback are appreciated. :fingers-crossed:
If you like my work you can offer me a beer!
Enjoy!
Thanks to
All Donators!
eybee1970
hamdogg for Videos
mythtrandyr for INK effect colour choose app
Philz for his Safe Kernel
Bangsti for Mirrors
Suggestion to who want to support with donations:
UpdateMe OTA app that I included on my ROM isn't developed by me so all donation trought it on "Configuration section" on the bottom of updateme aren't sent to me.
Donation will arrive to me ONLY if you go on ROM section on the top of UpdateMe on:*
Donate to ROM Creator (where the rom updates will usually display)*
or my signature in the forum
or my blog page.
I suggest to all who want support with donations to do it trought XDA or blog page on signature and NOT on UpdateMe!
This is to avoid wrong donations.
Thanks for attention and all donators so far!
Old Releases:
[ROM][4.1.2 JB]Ultimate N7000 XXLSZ JellyBean 4.1.2 v5.2 | OTA Available
[ROM][4.1.2 JB]Ultimate N7000 XXLSC JellyBean 4.1.2 v5.1 | OTA Available
[ROM][4.1.2 JB]Ultimate N7000 XXLSA JellyBean 4.1.2 v5 | OTA Available
[ROM][4.1.2 JB]Ultimate N7000 XXLS7 JellyBean 4.1.2 v4 | OTA Available
Some screenshots of how the ROM looks is always a good idea :good:
Ultimately not much different from others?
Sent from my GT-N7000 using xda premium
shure2 said:
Ultimately not much different from others?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
can't install (error status6)
I'd also love to get a perspective on how this is different from all the other leaks: is Productivity Tools working in SNote; is battery life improved? etc etc
Anyone can give review of this rom, tried downloading but mirror Download speed is in between 100-200 k only, and download get inerrupted
what's so different ?
one more thing i feel some memory leak in most XxLS2 Leak ROMS, Does this ROM have the Same Issue ?
Not working. Installation aborted. ( status 6)
Rocheau said:
Not working. Installation aborted. ( status 6)
Click to expand...
Click to collapse
That error, if I recall correctly, seems to indicate you're on an "incorrect" kernel. Try flashing Philz' safe kernel and then try to flash the ROM again...
Moe5508 said:
That error, if I recall correctly, seems to indicate you're on an "incorrect" kernel. Try flashing Philz' safe kernel and then try to flash the ROM again...
Click to expand...
Click to collapse
I have Philz' safe kernel and Not working too. Installation aborted. ( status 6)
Working on V2 that will fix updater-script error.
joosh3 said:
Working on V2 that will fix updater-script error.
Click to expand...
Click to collapse
@Joosh, not sure if you have seen and plan on answering the questions people had about this ROM and whether you have managed to fix the other "bugs" all the other JB leaks currently out there have? And not sure if you are looking to build a following in the forum but pics in OP, exact build changelog etc are requisite to build confidence in your potential users. And personally updater script errors should be the least of what we have to worry about. Good luck, anyway.
Same here! Im already coming from a XXLS2 that have Philz Kernel and same Installation aborted. ( status 6)
V2 is out!
Check it on OP
Download Link:
Ultimate N7000XXLS2 JellyBean 4.1.1 ROM V2
Why dont you answer users questions?
Enviado desde mi GT-N7000 usando Tapatalk 2
Sorry for delay.
Moe5508 said:
I'd also love to get a perspective on how this is different from all the other leaks: is Productivity Tools working in SNote; is battery life improved? etc etc
Click to expand...
Click to collapse
meethere said:
what's so different ?
Click to expand...
Click to collapse
Well, this ROM is completely based on files that eybee1970 posted.
I added working SNote files under
/system/app
SMemoProvider_Q1.apk
SMemo_Q1.apk
Snote_Q1_Provider,apk
/data/app
QuickSnote_Q1.apk
Snote_Q1.apk
Anyway files can be downloaded from here: SNote Files
Added also tweaks to have better battery life.
Can someone confirm if productivity tools in snote is working on this Rom?
Also can someone share the battery tweak.
Thanks
Sent from my GT-N7000 using xda premium
I tried almost all custom LS2 leaked ROMs, and I have the following notifications:
1- no one try to solve or at least to highlight galary problem (galary can't refresh by itself for new modification of your files!!) even this one.. I hope after this post that many of you try to check galary problem and try possible fixes for this issue..
2- almost all custom ROMs are excellent but the problem is with RAM consumption!! some apps will be chunky if RAM is more 700mb occupied!!
Is there any difference like all other tw jb. Devs popup now we have JB.
O i saw this line in op "Be sure you're on SAFE KERNEL, then you can wipe" Be carefull with this. Itf ills up your thread.
Downloading now, thanks. Let's see the difference.
Crazybuild
I've finally gotton around to build my own rom!
I've tried my share of roms, but they were never how I wanted them to be.
so I decided to build my own rom.
I Build it with Dsixda's Android Kitchen, for now it is only for Unlocked bootloaders, but i am working on a locked bootloader version too.
It is based on "Xperia T T-Mobile skyfall NL 9.1.A.0.489 (4.1.2 Jellybean)"
Hope you all like it so far!
Features:
DE-ODEXED
Removed some Bloatware
moved some apps wich I consider bloatware but others might not (facebook etc), to /data for easy removal
altered T-mobile bootanim so it will show original Sony bootanim.
removed T-mobile shutdownanimation
zipalign on boot
build.prop tweaks
SU rebootfix included
WIFI mac fix included
ROOT (Superuser by ChainsDD and Busybox 1.20.2)
unplugchargerreminder removed
no adb notification/icon
init.d support based on the works of Ryuinferno
Google Maps deleted, it gives a LOT of wake locks, you can download it from market if you want it.
updated some apps (e.g. google play, gmail)
added adobe flash player as system app
x--cwm for locked bootloader included (only in locked bootloader version)--x
in appdrawer there are a few grey square's
you can get rid of them by accessing menu (three dots top right), choosing uninstall and uninstall them.
the ones on home screen can be dragged away
WARNING:
(SMART) UPDATER SCRIPT
CAREFULL
This ROM WILL WIPE /DATA if you are NOT on a .489 (based) rom.
This ROM WILL NOT WIPE /DATA if you are on a .489 (based) rom.
If you format /system prior to flashing, this rom WILL format /data
Cache/Dalvik Cache always wipes, so you won't have to do this yourself
Build.prop: ro.build.id=9.1.A.0.489 <- this is the line the rom looks at.
...Made by Crazymister...
Basic flashing instructions:
1. Flash random stock .303 FTF with flashtool(TL users: If you flash T rom exclude baseband!)(*)
2. Root with Bin4ry's method(*)
3. Install CWM for locked bootloaders.(*)
step 1 - 3 not available for Locked Bootloaders YET!
4. Make a backup with nandroid and/or titanium backup.
5. Go to recovery and Flash ROM.
6. Locked bootloader: On reboot it will ask: "ROM may flash stock recovery on boot. fix?", choose "No".
7. Enjoy
(*) skip these steps if you're already on a ROM with CWM recovery or unlocked bootlader.
Download Links:
Only for LT30a and LT30p
Kernels are included in cwm
Locked bootloader (CWM) downloadlink: (wait for V1.5)
Unlocked bootloader (TWRP) Downloadlink: CrazyBuild_UB_V1.5.zip - 555.71 MB
changelog:
Crazybuild V1.0 (not released)
- de-odexed
- rooted
- edited updater-script to my liking
- changed bootanim
- more smallstuff
Crazybuild V1.1 (not released)
- added build.prop tweaks
- removed adb notification/icon
- moved apps from system > data
- melted bloatware
Crazybuild V1.2 (not released)
- added init.d support
Crazybuild V1.4 (Initial release)
- added zipalign at boot
CrazyBuild V1.5 UB
- removed some more bloatware
- adb debugging enabled by default
Crazybuild V1.5 LB (not release yet)
- add CWM for locked bootloaders
- removed some more bloatware
- adb debugging enabled by default
Plans for the future:
More tweaks
Better battery life
Aroma Installer
Credits:
Gregbradley - AIO thread
TiMiN8R - some invaluable info
Dsixda - Dsixda's kitchen
TiMiN8R - Wifi-Mac-Fix
Ryuinferno - init.d
lilstevie and DooMLoRD - TWRP Kernel (unlocked bootloader version)
ChainsDD - For superuser app
davidmarco, sharazz22, crazy_Doze and TiMiN8R - CWM for locked bootloader with JB fix
Bin4ry - Rebootfix at SU acces (for locked bootloader)
Androxyde for Flashtool
and last but not least, ME, for putting this all together.
Re: [ROM 4.1.2] [UB] CrazyBuild V1.4 [09-02-2013]
Wow.. Great work man
Does it have a statusbar toggles mod?
Any Screenshots?
Gonna try it these days
Sent from my LT30p using xda app
gooodjob
R: [ROM 4.1.2] [UB] CrazyBuild V1.4 [09-02-2013]
Wow.... Nice to see new rom....thanks for your works!!!!
Inviato dal mio LT30p con Tapatalk 2
Re: [ROM 4.1.2] [UB] CrazyBuild V1.4 [09-02-2013]
Sorry, no screenshots (yet) maybe I'll make them later (it's stock based so not much news)
Also no modded toggles, they are not available for jb yet. (only started a few days ago with learning )
Did I help? Please press the thanks button
Sent from my Xperia T (LT30P) using XDA premium
Re: [ROM 4.1.2] [UB] CrazyBuild V1.4 [09-02-2013]
Just installed it.
Looks Good.
Got 2 SD Cards => 0 & 1, when viewing with Root Explorer?
Any Idea?
Sent from my LT30p using xda app
Re: [ROM 4.1.2] [UB] CrazyBuild V1.4 [09-02-2013]
0 is internal 1 is external
This is due Sony's choice to emulate sdcard on /data
Did I help? Please press the thanks button
Sent from my Xperia T (LT30P) using XDA premium
Re: [ROM 4.1.2] [UB] CrazyBuild V1.4 [09-02-2013]
Both SD contain duplicate / same files...?
Should I delete one?
Sent from my LT30p using xda app
Duvel999 said:
Both SD contain duplicate / same files...?
Should I delete one?
Sent from my LT30p using xda app
Click to expand...
Click to collapse
I've never tried that t.b.h.
I personally just ignore it, since Stock JB had same behaviour with me.
Duvel999 said:
Both SD contain duplicate / same files...?
Should I delete one?
Sent from my LT30p using xda app
Click to expand...
Click to collapse
No, you shouldnt. Sdcard 0 contains files from your internal memory, and sdcard 1 contains files from external sdcard if you use it.
sdcard 0 and 1 are only different names in JB for "sdcard" and "ext_sdcard" from ICS. like crazymister said "0 is internal 1 is external"
Crazymister, Does your rom have walkman bug?
dkownacki said:
No, you shouldnt. Sdcard 0 contains files from your internal memory, and sdcard 1 contains files from external sdcard if you use it.
sdcard 0 and 1 are only different names in JB for "sdcard" and "ext_sdcard" from ICS. like crazymister said "0 is internal 1 is external"
Crazymister, Does your rom have walkman bug?
Click to expand...
Click to collapse
As i don't use walkman app i can't comment on that.
I Use Poweramp and got no problems with that.
Walkman app is on /data in my rom so maybe that changes something, but it is the standard walkman app.
V1.5 released for UB
see OP for downloadlink
crazymister said:
V1.5 released for UB
see OP for downloadlink
Click to expand...
Click to collapse
for locked bootloaders? any news?
I'm still working on it, but my girlfriend is at the pc now so might take a while.
Sent from my Xperia LT30p using XDA Premium app.
Did I help? Then please press the thanks button
crazymister said:
V1.5 released for UB
see OP for downloadlink
Click to expand...
Click to collapse
Hi
when taking picx im getting following error...
Memory Error
shub said:
Hi
when taking picx im getting following error...
Memory Error
Click to expand...
Click to collapse
clear and/or format sdcards
Phone goes into bootloop...
My phone is reacting strangely to all of the Sony JB ROMS..
Yeah I knew a format kinda needed to be done but was hoping I could get away with it, I had all aorta of issues before I.formatted the sdcard. All is fine now
Sent from my LT30p using Tapatalk 2
Installed it wihtout a problem, The problem I was getting with TiMiN8R JB rooted and deodexed didn't appea in this 'CRAZY BUILD' My phone is running Butterly Smooth
My recommendations would be to clean a little more the bloatware so there is more space to install apps.
2nd, there should be a better power controls on the status bar, but it should be a matter of time to see a tweak for JB
What was this problem you were getting? Maybe worth to include in op if more people mention it
Sent from my Xperia LT30p using XDA Premium app.
Did I help? Then please press the thanks button
IMPORTANT: Flash this ROM at your own risk. I or the XDA assume NO responsibility for any failed flashes or bricked tablets.
Samsung Galaxy Note 10.1
GT-N8000 WiFi+3G
Stock ROMs Deodexed
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Hello,
here is an deodexed Stock ROM for the GT-N8000. It is full Stock, i have no Apps removed or changed or added (only SuperSU). He based on Samsung Official ROM and is deodexed, rooted, ZigAlign and BusyBox is installed. So the ROM supports the S-PEN and all Samsung Applications...
Feel free for using this ROM for any modding please only give a link to this thread!
Please do not install any OTAs on this ROM if you get one.... I will customize all new software versions and posted here.
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Features:
Android OS, 4.1.2 Jelly Bean
Regions: Multi CSC
Insecure boot.img
modem.bin included
Rooted with su binary and SuperSU app (v 1.34)
Busybox installed v 1.20.2
Deodexed/Zipaligned
init.d Support
Touchwiz
S-Pen Support
Multi Screen
and all other Stock ROM Apps and Functions
NO Samsung Apps are removed... the ROM is full STOCK but deodexed!!
How to flash:
ROM downloaded
N8000-xxxx-xxxx-DBT-deodexed.zip push to your Note 10.1
boot in the CWM
MAKE A NANDROID BACKUP!
a full wipe is absolutely necessary
Cache and Dalvik Cache wipe
install ROM over CWM (wait a few minutes)
you dont needed to install any GApps (all GApps included in the ROM)
reboot your Device (the first boot can take a little bit more time)
N8000-XXCMJ3-MultiCSC-deodexed
Here is my Theme BlueDark for this Rom
http://forum.xda-developers.com/showthread.php?t=2270802
you welcome
Thanx man
Sent from my GT-N7100 using XDA Premium 4 mobile app
Will this flash on my N8013?
nickhimself said:
Will this flash on my N8013?
Click to expand...
Click to collapse
No
Sent from my GT-N7100 using XDA Premium 4 mobile app
nickhimself said:
Will this flash on my N8013?
Click to expand...
Click to collapse
Yes it will work.. Just put the Tablet in Airplane mode and then enable WiFi and/or Bluetooth after flashing.
I think this is silly question about CMJ3 but it did happen
1. Flashing via CWM, when processing after Writing System, the program just flash boot.bin and didn't flash modem.bin .
2. After Done Flashing
very first setup touch screen didn't sound. Touch screen only sound when we tick the touch screen at sound setup.
Lock screen shortcuts were missing, and there's no way we could set the lock screen shortcut.
Were these two problem were coming from the original sammobile XXCMJ3 DBT???
I'm Rolling Back to XXCMI2 Deodexed again. :crying: XXCMJ3 is better than XXCMI2
Thanks so much for making dedexed XXCMJ3, I'm waiting for updated XXCMJ3 DBT Deodexed.
Nee-n8000xxcml2-
Cypresshill555 said:
Nee-n8000xxcml2-
Click to expand...
Click to collapse
OP can you kindly deodex the ml2 rom please?
Thanks.