http://www.hackinthus.com/2013/03/how-to-install-jelly-bean-412-in.html
I followed the above link for installing JB 4.1.2 on my ICS
i upgrade to jelly bean 4.1.2 thrgh odin with md5 file but after it completed my note1 became blank & does not boot & also i cant put in download mode again...what do i do ..pls help
Are you sure ? Try pressing Power+Vol down+Home and connecting to PC(Odin must be running).If any one of the COM boxes light up, there is still hope !
Keep the charger connected for a couple of hours and try again.
Related
Hi
I tried to root my Galaxy note using the Odin method, and now i'm getting nothing but a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I would happily follow those directions, but now Kies won't recognize my device?!?!? I also can not get back into download mode. I have no idea what to do. Is there anyone out there that can help? please?
I do not know where to put this post, its my first one.... I am so sorry if it is not in the right place....
Iam all stressed out....
I tried to update to the latest firmware Icecream..... with odin method... it starts than it stops at hidden.img .......................over and over again..
zenn66 said:
Hi
I tried to root my Galaxy note using the Odin method, and now i'm getting nothing but a screen that says "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". I would happily follow those directions, but now Kies won't recognize my device?!?!? I also can not get back into download mode. I have no idea what to do. Is there anyone out there that can help? please?
I do not know where to put this post, its my first one.... I am so sorry if it is not in the right place....
Iam all stressed out....
I tried to update to the latest firmware Icecream..... with odin method... it starts than it stops at hidden.img .......................over and over again..
Click to expand...
Click to collapse
First make sure your phone is charged, before trying to get it into download mode again, if you can't you need a usb jig.
It was fully charged befor I started the update
Charge device for 1 hour.. Then pull out battery . wait for few seconds. again put battery in. Then Hold Volume down + home + Power for 10 secs. it should enter download mode.
If it doesn't work, Pull out the battery. hold volume up button put battery in holding volume up button, connect data cable to PC and Device, now it should get in to download mode.
if you able to get in to Download mode first flash Stock GB ROM using PC Odin.
" Read all instruction carefully before flashing your device "
Guys i tried to flash [4.0.4] CyanogenMod 9 experimental builds then i found out it is not stable yet so i decided to flash back to Malaysia ICS 4.0.3 thru Odin. After i flash the rom thru Odin , my phone keep restarting . After that i decided to unplug the battery and switch on again . I cannot start my phone after i unplug and plug in the battery again. I cannot go into download mode and recovery mode but i still can charge my phone with charger. Is my phone hard bricked? Can anyone save my phone from bricked ? Please give me some solution T.T
its impossible to hard brick the phone with software unless u flash some other phones boot loader on it , leave it on charging for an hour after that pull the battery out and try again , i remember having that prob try to get into recovery hold down both volume up, volume down, and power button and don't let go until recovery comes up after charging
Hard brick means u cant do anything. The fact that your phone is charging shows its not hard bricked. You cant do much though. Charge it and flip out and in your battery and try to go into download mode. If by chance u get into download mode, quickly roll back to an offial 4.0 or even 2.3.6 fr the time being.
Sent from my GT-I9100G using XDA
does your phone opens with a black screen when you push the power button or with a half brick screen like a phone and a computer image on the screen?
I would suggest that you take the battery out, plug it in after a while (5-10 mins) and turn on the power while quickly holding the Vol up+Home keys into the download mode. Then flash your ICS 4.03 via Odin and see if it works
you need buy or make yourself an USB JIG , then you can put the phone in download mode and reflash the stock firmware, i recommend reflash the 2.3.6 rom and next update via kies ...
Ya . thanks guys, it is not a hard brick . Is my handset got problem. I solved the problem already
It is writtrn there already did you get a black screen
After the boot that means you have not selected the resurection version.
Sent from my GT-I9100G using Tapatalk
After upgrad my mum's Galaxy Note ( from HK ) to Android 4.1.2, the screen can't turn on!!
After I press the power button to turn it on, the GT-N7000 logo will show for a while and than the screen just wnt all dark and nothing
When I try to go to recovery mode, the same situation appear
But when I go to download mode, is all find
Can anybody help me plz !!
How did you upgrade, odin, OTA, kies?
You can go into download mode.
So: Download a stock Rom (the JB release for Hongkong) and install it with PC Odin.
If you have errors in Odin tell us.
Or maybe everything is ok and after that your mum has a working device and a lovely sun again.
Hi guys - I have had a mini disaster with my Note and desperate for some expert advice.
Basically last night I ran the official ICS OTA it downloaded great, I left it plugged into the power and ran the update as I slept. I woke up this morning to find the battery flat, guessing a charging issue I used my external charger to charge the battery. Now, the phone is stuck in some kind of boot loop - It passes the Samsung splash screen to a black screen with the Android Robot with it's belly full of spiraling triangles. That hangs for 30 seconds then it restarts and does the same thing over and over again.
I can not enter recovery mode - vol up + home + power doesn't work but I can enter the download ODIN screen.
Any ideas what I can do?
redbarra1 said:
Hi guys - I have had a mini disaster with my Note and desperate for some expert advice.
Basically last night I ran the official ICS OTA it downloaded great, I left it plugged into the power and ran the update as I slept. I woke up this morning to find the battery flat, guessing a charging issue I used my external charger to charge the battery. Now, the phone is stuck in some kind of boot loop - It passes the Samsung splash screen to a black screen with the Android Robot with it's belly full of spiraling triangles. That hangs for 30 seconds then it restarts and does the same thing over and over again.
I can not enter recovery mode - vol up + home + power doesn't work but I can enter the download ODIN screen.
Any ideas what I can do?
Click to expand...
Click to collapse
simply flash the rom once again.. if you can manage to enter recovery then do a full a wipe and reflash the rom
Mayank Chandwani said:
simply flash the rom once again.. if you can manage to enter recovery then do a full a wipe and reflash the rom
Click to expand...
Click to collapse
Thanks Mayank - do you know of a tutorial to take me through this process - I am a complete novice very nervous of screwing it up.
redbarra1 said:
Thanks Mayank - do you know of a tutorial to take me through this process - I am a complete novice very nervous of screwing it up.
Click to expand...
Click to collapse
1. Go to sammobile.com and download latest firmware.
2. Search for pc odin and download and install it on your laptop or computer.
3. Unzip the firmware to get a md5 tar file.
4. Put ur note in download mode and connect it to ur pc.
5. Pc odin should show ur phone connected in yellow or orange logo. Make sure u have kies installed before this.
6. Click on pda in odin and select the unzipped file and hit start.
7. Wait untill the phone reboots
Mayank Chandwani said:
1. Go to sammobile.com and download latest firmware.
2. Search for pc odin and download and install it on your laptop or computer.
3. Unzip the firmware to get a md5 tar file.
4. Put ur note in download mode and connect it to ur pc.
5. Pc odin should show ur phone connected in yellow or orange logo. Make sure u have kies installed before this.
6. Click on pda in odin and select the unzipped file and hit start.
7. Wait untill the phone reboots
Click to expand...
Click to collapse
That's awesome - just one final question: you say I need kies, what part does that play? For the life of me I have never got it talking with my Note.
redbarra1 said:
That's awesome - just one final question: you say I need kies, what part does that play? For the life of me I have never got it talking with my Note.
Click to expand...
Click to collapse
without kies..odin won't recognize the device.. kies is the driver for the device
you can also use Samsung USB drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows
to start with YES i have googled the whole internet to find a sollution to this problem.............. i have found some hints to others have THIS problem but no solution......... and flashing overcome flashin anything else for that matter using Dowload mode / recovery mode is not possible at present ( unless some one knows the solution to this specific problem ( read below please )
Hello there i got my hands on 2 used GT-P1000, the first one had 2.3.3 on it when i got it as far as i remember , i proceeded to reflash it to Android 2.3.6 following a VIO vidoe on youtube and then flashed it to android 4.1.2 also following a VIO video.... it works super and there was no problems with it......
then i got the 2nd GT-P1000 and i wanted to do the same to it..... BUT and i didnt take notice at first.... but i remembered after that this one had the stock android 2.2...........
i tryed to flash it to 2.3.6 using odin and so on like i did the previous GT-P1000........... it resultet in beeing stuck in samsung boot loop so i thought ok i have to flash it back to stock and i googlet and found a rom that i thought was the stock rom and flashed it and got PASS from odin and so on.... ( i should proberbly have done a little more homework before the 2nd flash wich was done a little in the blind ) but then i reboobet the tablet at ended up with.... ( see below )
if power button is pressed the Tablet will turn on but will ONLY light up buttons and have black screen NO other signs of life........ i can hold power button at turn it off again.
if i hold volume down button and power button to enter download mode NOTHING happens.............. it dous not turn on or do anything................
if i hold volume up and power button it just turns on and lights buttons with black screen............ nothing else
if i plug it into the charger after a couple of minutes it lights up buttons with black screen and just stays like that untill turned off...........
if i plug the tablet into usb on my computer i get the usb plugged in sound like it regonizes the tablet and Odin shows that the tablet is there...... BUT odin keeps getting stuck on " <ID:0/003> SetupConnection.. " , i tryed unplugging and then plugging the tablet in fast as some one said in a post that you can do but odin just stops and says fail........... what ever i try to flash i odin gets stuck on <ID:0/003> SetupConnection..
i have tryed 2 different versions of odin....... 1.7 and the one in the vio video i used to flash the first tablet without a hitch..............
i also tryed oneclickunbrick thing wich cant see the tablet.............
in short ...........'
Tablet cant boot any mode , just lights buttons and black screen
is regonized by odin but will not accept any flash..........
help? please............ thanks in advance............
SOLVED!
Sollution:
Using the VIO youtube video upgrade to 2.3.6 content as described......
1. Make Odin ready with the rom in PDA as video describes.
2. connect tablet to computer while off and imidiatly hold down Vol Down and power button as if trying to get into Download mode, tablet will not light or show anything in screen up but computer will make USB detected sound... then press start in Odin......... it will flash the rom " P1000XWJQ8_P1000AUTJQ1_P1000XXJPZ_HOME.tar ".... follow the steps as described in VIO video EXEPT! do not let the tablet boot into android as the VIO guy says, turn it off and enter download mode and flash the 2nd file called " dbdata " and then follow his steps..... this is what i think prevented me from getting boot loop issue again................
i upgraded to the 4.1.2 by VIO also and the tablet works super! now....
i posted this to help others with THIS problem................. cheers.
How to fix bro. Email to me [email protected] thank you
:victory:
my tab keeps on turning the flash light on and off..
BMN2205 said:
to start with YES i have googled the whole internet to find a sollution to this problem.............. i have found some hints to others have THIS problem but no solution......... and flashing overcome flashin anything else for that matter using Dowload mode / recovery mode is not possible at present ( unless some one knows the solution to this specific problem ( read below please )
Hello there i got my hands on 2 used GT-P1000, the first one had 2.3.3 on it when i got it as far as i remember , i proceeded to reflash it to Android 2.3.6 following a VIO vidoe on youtube and then flashed it to android 4.1.2 also following a VIO video.... it works super and there was no problems with it......
then i got the 2nd GT-P1000 and i wanted to do the same to it..... BUT and i didnt take notice at first.... but i remembered after that this one had the stock android 2.2...........
i tryed to flash it to 2.3.6 using odin and so on like i did the previous GT-P1000........... it resultet in beeing stuck in samsung boot loop so i thought ok i have to flash it back to stock and i googlet and found a rom that i thought was the stock rom and flashed it and got PASS from odin and so on.... ( i should proberbly have done a little more homework before the 2nd flash wich was done a little in the blind ) but then i reboobet the tablet at ended up with.... ( see below )
if power button is pressed the Tablet will turn on but will ONLY light up buttons and have black screen NO other signs of life........ i can hold power button at turn it off again.
if i hold volume down button and power button to enter download mode NOTHING happens.............. it dous not turn on or do anything................
if i hold volume up and power button it just turns on and lights buttons with black screen............ nothing else
if i plug it into the charger after a couple of minutes it lights up buttons with black screen and just stays like that untill turned off...........
if i plug the tablet into usb on my computer i get the usb plugged in sound like it regonizes the tablet and Odin shows that the tablet is there...... BUT odin keeps getting stuck on " <ID:0/003> SetupConnection.. " , i tryed unplugging and then plugging the tablet in fast as some one said in a post that you can do but odin just stops and says fail........... what ever i try to flash i odin gets stuck on <ID:0/003> SetupConnection..
i have tryed 2 different versions of odin....... 1.7 and the one in the vio video i used to flash the first tablet without a hitch..............
i also tryed oneclickunbrick thing wich cant see the tablet.............
in short ...........'
Tablet cant boot any mode , just lights buttons and black screen
is regonized by odin but will not accept any flash..........
help? please............ thanks in advance............
SOLVED!
Sollution:
Using the VIO youtube video upgrade to 2.3.6 content as described......
1. Make Odin ready with the rom in PDA as video describes.
2. connect tablet to computer while off and imidiatly hold down Vol Down and power button as if trying to get into Download mode, tablet will not light or show anything in screen up but computer will make USB detected sound... then press start in Odin......... it will flash the rom " P1000XWJQ8_P1000AUTJQ1_P1000XXJPZ_HOME.tar ".... follow the steps as described in VIO video EXEPT! do not let the tablet boot into android as the VIO guy says, turn it off and enter download mode and flash the 2nd file called " dbdata " and then follow his steps..... this is what i think prevented me from getting boot loop issue again................
i upgraded to the 4.1.2 by VIO also and the tablet works super! now....
i posted this to help others with THIS problem................. cheers.
Click to expand...
Click to collapse
please help me.... my tab is just turning the flash light on and off.. after all the stuffs doing through odin. please help me to bring my tablet back.
BMN2205 said:
to start with YES i have googled the whole internet to find a sollution to this problem.............. i have found some hints to others have THIS problem but no solution......... and flashing overcome flashin anything else for that matter using Dowload mode / recovery mode is not possible at present ( unless some one knows the solution to this specific problem ( read below please )
Hello there i got my hands on 2 used GT-P1000, the first one had 2.3.3 on it when i got it as far as i remember , i proceeded to reflash it to Android 2.3.6 following a VIO vidoe on youtube and then flashed it to android 4.1.2 also following a VIO video.... it works super and there was no problems with it......
then i got the 2nd GT-P1000 and i wanted to do the same to it..... BUT and i didnt take notice at first.... but i remembered after that this one had the stock android 2.2...........
i tryed to flash it to 2.3.6 using odin and so on like i did the previous GT-P1000........... it resultet in beeing stuck in samsung boot loop so i thought ok i have to flash it back to stock and i googlet and found a rom that i thought was the stock rom and flashed it and got PASS from odin and so on.... ( i should proberbly have done a little more homework before the 2nd flash wich was done a little in the blind ) but then i reboobet the tablet at ended up with.... ( see below )
if power button is pressed the Tablet will turn on but will ONLY light up buttons and have black screen NO other signs of life........ i can hold power button at turn it off again.
if i hold volume down button and power button to enter download mode NOTHING happens.............. it dous not turn on or do anything................
if i hold volume up and power button it just turns on and lights buttons with black screen............ nothing else
if i plug it into the charger after a couple of minutes it lights up buttons with black screen and just stays like that untill turned off...........
if i plug the tablet into usb on my computer i get the usb plugged in sound like it regonizes the tablet and Odin shows that the tablet is there...... BUT odin keeps getting stuck on " <ID:0/003> SetupConnection.. " , i tryed unplugging and then plugging the tablet in fast as some one said in a post that you can do but odin just stops and says fail........... what ever i try to flash i odin gets stuck on <ID:0/003> SetupConnection..
i have tryed 2 different versions of odin....... 1.7 and the one in the vio video i used to flash the first tablet without a hitch..............
i also tryed oneclickunbrick thing wich cant see the tablet.............
in short ...........'
Tablet cant boot any mode , just lights buttons and black screen
is regonized by odin but will not accept any flash..........
help? please............ thanks in advance............
SOLVED!
Sollution:
Using the VIO youtube video upgrade to 2.3.6 content as described......
1. Make Odin ready with the rom in PDA as video describes.
2. connect tablet to computer while off and imidiatly hold down Vol Down and power button as if trying to get into Download mode, tablet will not light or show anything in screen up but computer will make USB detected sound... then press start in Odin......... it will flash the rom " P1000XWJQ8_P1000AUTJQ1_P1000XXJPZ_HOME.tar ".... follow the steps as described in VIO video EXEPT! do not let the tablet boot into android as the VIO guy says, turn it off and enter download mode and flash the 2nd file called " dbdata " and then follow his steps..... this is what i think prevented me from getting boot loop issue again................
i upgraded to the 4.1.2 by VIO also and the tablet works super! now....
i posted this to help others with THIS problem................. cheers.
Click to expand...
Click to collapse
Thanks a lot mate I have the same issue with my old tablet but I dont know if this version will work since a I have a Gt-P1000N
Exactly the same issue help me too please if possible mail me on [email protected]
Would you copy the link to the video tuts you used?
I got the same problem and I need help, would you please copy the link to the video tuts to help me? I am lost and I´m not very knoledgeable in this issue.
BMN2205 said:
to start with YES i have googled the whole internet to find a sollution to this problem.............. i have found some hints to others have THIS problem but no solution......... and flashing overcome flashin anything else for that matter using Dowload mode / recovery mode is not possible at present ( unless some one knows the solution to this specific problem ( read below please )
Hello there i got my hands on 2 used GT-P1000, the first one had 2.3.3 on it when i got it as far as i remember , i proceeded to reflash it to Android 2.3.6 following a VIO vidoe on youtube and then flashed it to android 4.1.2 also following a VIO video.... it works super and there was no problems with it......
then i got the 2nd GT-P1000 and i wanted to do the same to it..... BUT and i didnt take notice at first.... but i remembered after that this one had the stock android 2.2...........
i tryed to flash it to 2.3.6 using odin and so on like i did the previous GT-P1000........... it resultet in beeing stuck in samsung boot loop so i thought ok i have to flash it back to stock and i googlet and found a rom that i thought was the stock rom and flashed it and got PASS from odin and so on.... ( i should proberbly have done a little more homework before the 2nd flash wich was done a little in the blind ) but then i reboobet the tablet at ended up with.... ( see below )
if power button is pressed the Tablet will turn on but will ONLY light up buttons and have black screen NO other signs of life........ i can hold power button at turn it off again.
if i hold volume down button and power button to enter download mode NOTHING happens.............. it dous not turn on or do anything................
if i hold volume up and power button it just turns on and lights buttons with black screen............ nothing else
if i plug it into the charger after a couple of minutes it lights up buttons with black screen and just stays like that untill turned off...........
if i plug the tablet into usb on my computer i get the usb plugged in sound like it regonizes the tablet and Odin shows that the tablet is there...... BUT odin keeps getting stuck on " <ID:0/003> SetupConnection.. " , i tryed unplugging and then plugging the tablet in fast as some one said in a post that you can do but odin just stops and says fail........... what ever i try to flash i odin gets stuck on <ID:0/003> SetupConnection..
i have tryed 2 different versions of odin....... 1.7 and the one in the vio video i used to flash the first tablet without a hitch..............
i also tryed oneclickunbrick thing wich cant see the tablet.............
in short ...........'
Tablet cant boot any mode , just lights buttons and black screen
is regonized by odin but will not accept any flash..........
help? please............ thanks in advance............
SOLVED!
Sollution:
Using the VIO youtube video upgrade to 2.3.6 content as described......
1. Make Odin ready with the rom in PDA as video describes.
2. connect tablet to computer while off and imidiatly hold down Vol Down and power button as if trying to get into Download mode, tablet will not light or show anything in screen up but computer will make USB detected sound... then press start in Odin......... it will flash the rom " P1000XWJQ8_P1000AUTJQ1_P1000XXJPZ_HOME.tar ".... follow the steps as described in VIO video EXEPT! do not let the tablet boot into android as the VIO guy says, turn it off and enter download mode and flash the 2nd file called " dbdata " and then follow his steps..... this is what i think prevented me from getting boot loop issue again................
i upgraded to the 4.1.2 by VIO also and the tablet works super! now....
i posted this to help others with THIS problem................. cheers.
Click to expand...
Click to collapse