Ok soooo ive uninstalled safestrap and back on stock recovery and stock ics rooted. What else do i need to do to recieve ota when its pushed out?
Sent from my DROID4 using xda app-developers app
rruleford said:
Ok soooo ive uninstalled safestrap and back on stock recovery and stock ics rooted. What else do i need to do to recieve ota when its pushed out?
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
If it's like the last OTA to ICS, you're probably going to have to flash the ICS fastboot files before the new OTA will take. The problem before was safestrap changed something, somewhere (logwrapper maybe?), that did not get changed back after uninstalling the safestrap recovery and app. MAYBE this has been changed/fixed in the new versions of safestrap? Pretty sure we were on version 2.x at the time. You can always try without fastbooting and see what happens. Won't hurt anything. If you do need to fastboot, use jsnweitzel's utility. It has an option to fastboot without wiping data. That's what I'm planning on doing. It should still fix whatever safestrap changed.
Sent from my Droid 4 - LiquidSmooth
kwyrt said:
If it's like the last OTA to ICS, you're probably going to have to flash the ICS fastboot files before the new OTA will take. The problem before was safestrap changed something, somewhere (logwrapper maybe?), that did not get changed back after uninstalling the safestrap recovery and app. MAYBE this has been changed/fixed in the new versions of safestrap? Pretty sure we were on version 2.x at the time. You can always try without fastbooting and see what happens. Won't hurt anything. If you do need to fastboot, use jsnweitzel's utility. It has an option to fastboot without wiping data. That's what I'm planning on doing. It should still fix whatever safestrap changed.
Sent from my Droid 4 - LiquidSmooth
Click to expand...
Click to collapse
In doing that it froze on step 3 of 17 mbmloader. Over night. When disconnected and tried again the battery was to dead. Plugged into wall charger now. Should i try again when its fully charged??
Sent from my DROID4 using xda app-developers app
rruleford said:
In doing that it froze on step 3 of 17 mbmloader. Over night. When disconnected and tried again the battery was to dead. Plugged into wall charger now. Should i try again when its fully charged??
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
Yes. Never try to flash a fastboot or sbf file without making sure you have PLENTY of charge. Same goes for backing up and ROM flashing. You never want your phone to die in the middle of a flash.
Sent from my Droid 4 - LiquidSmooth
I think the most important thing to do is grab the update file and post it on Mediafire or similar so that the rest of us can have it
Related
While I'm thinking about it, I wanted to ask a question. I had to revert back to the stock ROM, and went to re-add root and Safestrap 2.10. All went well with the install, but when I went to enable the Safe System, and I rebooted, the phone did the POST (Motorola symbol), got to the SafeStrap splash, then the screen went blank. None of the keys would do anything, and the only way I could make anything happen, was to pull the battery. I had to go back into Safestrap, and disable it again. Anyone else experience this?
-Roger
cpnbnanamn said:
While I'm thinking about it, I wanted to ask a question. I had to revert back to the stock ROM, and went to re-add root and Safestrap 2.10. All went well with the install, but when I went to enable the Safe System, and I rebooted, the phone did the POST (Motorola symbol), got to the SafeStrap splash, then the screen went blank. None of the keys would do anything, and the only way I could make anything happen, was to pull the battery. I had to go back into Safestrap, and disable it again. Anyone else experience this?
-Roger
Click to expand...
Click to collapse
Did you flash something in safe mode before rebooting?
Sent from my XT860 using xda premium
Endoroid said:
Did you flash something in safe mode before rebooting?
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
No, just enabled it, allowed it to do it's backup, then rebooted. Thought for sure I was going to have to reload SBF again.
-Roger
cpnbnanamn said:
No, just enabled it, allowed it to do it's backup, then rebooted. Thought for sure I was going to have to reload SBF again.
-Roger
Click to expand...
Click to collapse
The first time you enable safe mode you need to flash a rom. You tried to boot... Nothing, thus the black screen
Sent from my XT860 using xda premium
Endoroid said:
The first time you enable safe mode you need to flash a rom. You tried to boot... Nothing, thus the black screen
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Ahh.. that makes sense. Do we have any idea when a more stable ROM is coming out for the D3?
cpnbnanamn said:
Ahh.. that makes sense. Do we have any idea when a more stable ROM is coming out for the D3?
Click to expand...
Click to collapse
All gb roms are stable. It's just ics that has issues, however the kexec cm9 currently in alpha will be stable, likely in the next few weeks
Sent from my XT860 using xda premium
Endoroid said:
All gb roms are stable. It's just ics that has issues, however the kexec cm9 currently in alpha will be stable, likely in the next few weeks
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
The kexec ICS from 8/6 is surprising stable for me. I've been running it for nearly a week and while I've had some reboots and a couple of freezes that required a battery pull, it's run better than I expected.
I have had the problem with leaving bluetooth on and answering a call without a headset - no audio until BT turned off.
Also, as advertised, no camera. Another note, the car dock USB audio doesn't work.
I've even scripted a mount to keep the Play Music directory on the external SD card and mass storage mount on the computer works better than stock with the mount in place. Internal sd doesn't mount though.
Sent from my XT862 using Tapatalk 2
I've been trying to do the OTA update and can't. I've uninstalled recovery, uninstalled safestrap, updated my SU, unfroze all apps, and downloaded voodoo. Well after I think 7 attempts of this I decided to switch methods and do it through fastboot. Well I can't get fastboot to actually stay open on my computer to accomplish this. I have tried to figure that problem out too no help there. I'm assuming I deleted something before I froze the apps that isn't allowing me to do the update. Is there any solution to all this? Especially getting fastboot to work. Also in safestrap the first time I flashed something to my safe system it worked fine. After that regardless of what I did I could never get another rom to work. Everything else just sent it into a black screen forever.
What are you using to try to fastboot? RSDlite or jsnweitzel's Droid 4 tool?
Droid 4 - AOKP FLATLINER-KRUSH
Rsdlite
Sent from my DROID4 using xda app-developers app
Wolverinepur said:
Rsdlite
Sent from my DROID4 using xda app-developers app
Click to expand...
Click to collapse
I would try using the Droid 4 Utility. I successfully fastbooted GB a while back using it. Also, make sure you have the latest moto drivers installed.
Droid 4 - AOKP FLATLINER-KRUSH
Yeah I just did that. It worked took a couple minutes but I'm all updated now.
Sent from my DROID4
MOVED TO: Batakang Rises.
Score from phone ui
Sent from my MB886 using Tapatalk 2
So we would have to be on JB leak to flash? And sorry for not testing haven't had the time.
Sent from that dude with that one phone
topdawg661 said:
So we would have to be on JB leak to flash? And sorry for not testing haven't had the time.
Sent from that dude with that one phone
Click to expand...
Click to collapse
Yes you must be on the Jellybean leak, rooted, with Safestrap 3.0 installed.
Well I rebooted without wiping data or cache and now my phone won't boot.
Cannot enter SS3 either..
So this is a must, not a suggestion.
Markyzz said:
Well I rebooted without wiping data or cache and now my phone won't boot.
Cannot enter SS3 either..
So this is a must, not a suggestion.
Click to expand...
Click to collapse
For you it was a must, in my other experience it's a suggestion. Always wipe if unsure. I will note this in the OP, however.
Yes go into boot options (power and both volume buttons) bp tools
Sent from my MB886 using Tapatalk 2
**for those who cant find the location of their backup if they used external its under sdcard/twrp/stock stock**
thanks op im restoring at the moment cant wait to get this thing working
miko85 said:
**for those who cant find the location of their backup if they used external its under sdcard/twrp/stock stock**
thanks op im restoring at the moment cant wait to get this thing working
Click to expand...
Click to collapse
Which kind are you trying out?
Downloading tablet UI version.
Thanks,Matt..you've kept us alive.
Sent from my DROID4 using Tapatalk 2
Thanks man , great to see some Custom ROM Action :good:
Will definitely try it over the weekend .
Did everything like the op said and ended up in a boot loop.So i had to go to ap fastboot and use the utility 1.0 to go back to stock and start over.Not sure what went wrong.Will try again and see what happens.
Hey matt. Nice ROM... it looks really cool. Thanks.
For ppl with unlocked BL are the steps the same. Mine is a bell model and cant update to the leaked jellybean. Also do i need safestrap?
I now there's only like 2 of us in this situation here... thnx in advance
Sent from my MB886 using xda app-developers app
unsuccesful on my end as well just stayed at the boot animation all night RSD saved me though i might try again later
edit** tried twice now and still no dice boot loopin on tablet mode
bootloop
tried tablet version and went into bootloop.....and what happened to the safe strap recovery because this sucks having to rsd, update, root all over again. can i just root, install recovery then restore MY ORIGINAL backup and i assume thats without data. this was a simple op nothing should have went wrong...maybe leave save strap in???
I'm a giddy lil' b#!&h for this! I can't wait to get the time to figure all of this out and get this GORGEOUS ROM runnin! Thanks Matt and Sirhoover for all your work and testing!
Deep rooted in the mAtrix HD...
http://android-gz.com
gabo_e30 said:
Hey matt. Nice ROM... it looks really cool. Thanks.
For ppl with unlocked BL are the steps the same. Mine is a bell model and cant update to the leaked jellybean. Also do i need safestrap?
I now there's only like 2 of us in this situation here... thnx in advance
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Well you can go to leaked Jellybean for AT&T if you are boot loader unlocked... You flash system and boot.IMG from ATT 77.12.22 then boot to stock recovery and install the jellybean leak after the normal root procedure ( root, ota root keeper, etc) see the threads for those Also might need to wipe data when flashing att files or boot loop.
Sent from my MB886 using Tapatalk 2
For people having problems I hope you restored to a ROM Slot and wiped data/cache. This method has been tested by SirHoover2010 and he says it works.
It works.
Sent from my MB886 using Tapatalk 2
I'm bootlooping even after wiping data/cache, No safestrap. Tried PhoneUI
SirHoover2010 said:
It works.
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
Which one did you install?
I tried 3 different times to get the tablet UI working. Each time I got stuck in boot loop.
Sent from my phone.
keep in mind before anyone updates to the official jb. i suspect the official release will be patched to not allow us to return to ics. if you keep root after the update good but if you some how break root there might no be a way to get it back as of now! so be cautious before you accept update. we should at least wait for an official jb fxz if you plan on keepng root this way if you mess something up at least you will have a working phone back without root of course. again i dont know they will patch the official release to prevent downgrade but lets find out for sure to be on the safe side. i dont think were gonna get dan to make us a jb root method right away soon.....
It could be considering its small size. Those who have updated to JB OTA should install safestrap and make a backup.
cmvienneau said:
keep in mind before anyone updates to the official jb. i suspect the official release will be patched to not allow us to return to ics. if you keep root after the update good but if you some how break root there might no be a way to get it back as of now! so be cautious before you accept update. we should at least wait for an official jb fxz if you plan on keepng root this way if you mess something up at least you will have a working phone back without root of course. again i dont know they will patch the official release to prevent downgrade but lets find out for sure to be on the safe side. i dont think were gonna get dan to make us a jb root method right away soon.....
Click to expand...
Click to collapse
This exactly what that was, I am no longer able to downgrade to 4.0.4 using the Atrix Utility. No biggie for me though, I'm rooted with SS3, and I have backups!
Sent from my MB886 using xda app-developers app
I tried to apply update on jb leak no go... Just a heads up. Still have root. On leak.
Sent from my MB886
I'll try Flashing through Motorola online hope it works
Sent from my MB886 using xda app-developers app
huatz84 said:
It could be considering its small size. Those who have updated to JB OTA should install safestrap and make a backup.
Click to expand...
Click to collapse
That's not the official one... A leak update for a leak update is not the official OTA. The official package (if for some reason it is 98.4.20) will be the size of at least the 2 leak update.zips together. It is not a 10 MB change from ICS to JB. It's a 10 MB change from JB leak to JB leak.
mattlgroff said:
That's not the official one... A leak update for a leak update is not the official OTA. The official package (if for some reason it is 98.4.20) will be the size of at least the 2 leak update.zips together. It is not a 10 MB change from ICS to JB. It's a 10 MB change from JB leak to JB leak.
Click to expand...
Click to collapse
Yeah..this ota is just a minor update over the leak. I think I should change my siggy after all..
Sent from my MB860 using Tapatalk 2
Hello friends!
I've got AT&T Atrix HD with JB leak installed, with uncomplete root (root is present but any app cannot access root!), and yesterday I've received software update (98.4.20.en.US).
Tell me please - can I flash back to ICS, or somehow in another way gain root access??
Ramonsterator said:
Hello friends!
I've got AT&T Atrix HD with JB leak installed, with uncomplete root (root is present but any app cannot access root!), and yesterday I've received software update (98.4.20.en.US).
Tell me please - can I flash back to ICS, or somehow in another way gain root access??
Click to expand...
Click to collapse
I haven't tried going back to ics. But,I believe this ota block us going back. I think someone at Moto seeing what we've done here.
Sent from my MB886 using Tapatalk 2
huatz84 said:
I haven't tried going back to ics. But,I believe this ota block us going back. I think someone at Moto seeing what we've done here.
Sent from my MB886 using Tapatalk 2
Click to expand...
Click to collapse
I can confirm that this OTA does block you from going back too ICS. Lucky for me, I have backups, and i kept root, so I can go back by restoring one of my backups. But I think this leak OTA is pretty good, so I'm not to upset.
Sent from my MB886 using xda app-developers app
PeteSeiler2010 said:
I can confirm that this OTA does block you from going back too ICS. Lucky for me, I have backups, and i kept root, so I can go back by restoring one of my backups. But I think this leak OTA is pretty good, so I'm not to upset.
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Just sent you a PM
I second PeteSeiler2010's confirmation. I installed this update and tried going back to ICS with both RSD Lite and the Atrix utility.Neither worked. Luckily though, I too had made a backup with SS3 and was able to revert back and get root again.
Nate3D said:
I second PeteSeiler2010's confirmation. I installed this update and tried going back to ICS with both RSD Lite and the Atrix utility.Neither worked. Luckily though, I too had made a backup with SS3 and was able to revert back and get root again.
Click to expand...
Click to collapse
Unfortunately, I do not have any ICS backups for my phone, I must have named a JB backup as and ICS thats all I can think of...anyway, I too and hoping someone can upload an ICS backup somewhere so I too have the ability to go back to ICS if need be. Sorry for the false hope!
If any one has a backup off ICS, I would be happy to upload it my dropbox site so we all would have that to fall back on.
Sent from my SGH-I897 using xda app-developers app
PeteSeiler2010 said:
If any one has a backup off ICS, I would be happy to upload it my dropbox site so we all would have that to fall back on.
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Just to clarify for Pete.
We don't want your information stored on your phone.
1) Restore back to ICS using the "restore function" in SS3/TWRP
2) Do a Factory Data Reset in settings.... privacy..... Factory Data Reset (this will wipe all personal info from the phone).
3) After you've done a Factory Data Reset, do a backup in SS3/TWRP.
4) Zip up the folder that has the backup you just performed, and upload it to a file server somewhere.
5) Post the link in this thread.
6) Be a Hero!
ATGAdmin said:
Just to clarify for Pete.
We don't want your information stored on your phone.
1) Restore back to ICS using the "restore function" in SS3/TWRP
2) Do a Factory Data Reset in settings.... privacy..... Factory Data Reset (this will wipe all personal info from the phone).
3) After you've done a Factory Data Reset, do a backup in SS3/TWRP.
4) Zip up the folder that has the backup you just performed, and upload it to a file server somewhere.
5) Post the link in this thread.
6) Be a Hero!
Click to expand...
Click to collapse
Yeah, thanks ATGAdmin for clarifying...we don't want your information, just the clean, wiped ICS backup. If anyone has one they would like to share to help bail a few of us out, it would be most excellent!
Has anyone JUST flashed the ICS system.img.ext4 and boot.img manually, wiped data, and attempted to boot?
mattlgroff said:
Has anyone JUST flashed the ICS system.img.ext4 and boot.img manually, wiped data, and attempted to boot?
Click to expand...
Click to collapse
You mean flash them through Fastboot?
Sent from my SGH-I897 using xda app-developers app
PeteSeiler2010 said:
You mean flash them through Fastboot?
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
Yes.
Code:
fastboot flash system system.img.ext4
fastboot flash boot boot.img
mattlgroff said:
Yes.
Code:
fastboot flash system system.img.ext4
fastboot flash boot boot.img
Click to expand...
Click to collapse
I'm at work for 3 more hours, so maybe someone else can try it. If not, I will when I get home.
Sent from my SGH-I897 using xda app-developers app
Hi guys,
I installed JB on my droid 4. It was running the stock ICS from Motorola. I used this : http://forum.xda-developers.com/showthread.php?t=2199741
I installed it by wiping the normal slot and put the zip file on the first rom slot.
I was able to boot on it without any problems, and I unistalled some of the stock apps (such as Verizon stuff, Motorola... I don't quite remember all the names). Since this moment, I didn't reboot my phone and it was fine.
But today I went out of battery, and now my phone wont boot ! I have the "Dual Core Technology", the Safetrap screen, and then blackscreen. Even the Motorola recovery wont work. And the phone doesn't seem to charge for whatever reason.
Is there a way to make my phone boot ? I was thinking about reinstalling ICS and make the update OTA to JB, but since I don't have energy on my phone I don't have time to do this...
Help me !
Thank you.
I'm sure you could just use
http://forum.xda-developers.com/showthread.php?t=2207384
And go straight to jb ... But idk just a thought....
Sent from my XT894 using xda app-developers app
dbreezy187 said:
I'm sure you could just use
http://forum.xda-developers.com/showthread.php?t=2207384
And go straight to jb ... But idk just a thought....
Sent from my XT894 using xda app-developers app
Click to expand...
Click to collapse
The problem is that my phone wont charge at all ! I can let it plugged for hours it doesn't work.
you will need a tbh programming adapter, to by pass battery
so you can flash xml restore file with rsd lite or or droid 4 utility
links in my list
sd_shadow's [Collection] of Links for Droid 4
Sent from my Clear using xda premium
You could try to make one if you can't buy one...
http://forum.xda-developers.com/showthread.php?t=1077414 never tried to make or use it myself... I did make an otg cable mentioned in the post... Worked fine I'm sure this would to...
Sent from my XT894 using xda app-developers app
Well thank you for your answers, I have to buy this cable so...