Database Develop

Sprint Tab ROM? JME?

Didn't someone get JME Rom working on CDMA Sprint Tabs? By changing the build name around?
I cant find the post, but who ever it is, please give us more details. How'd you do it? Do you recommend it? How is it holding up? Does it brick anything (GPS, MODEM?)
Thank you!

I did it to my Sprint Galaxy Tab, original post here (http://forum.xda-developers.com/showthread.php?t=929898)
I had to remove movinand.mst and it flashed fine using Odin, I just followed the directions there.
HOWEVER, the way I did it will make the Tab WIFI Only with no known way to get back until someone can figure out how to dump the sprint stock modem.bin.
That is fine with me as I did not want the 3G, but did want the Bluetooth HID. (now my Bluetooth Mouse and Keyboard work)
You might be able to pull the modem.bin file out as well as movinand.mst but I have no idea what that would do, sounds very risky.
M.

did that brick your GPS though?
I use it as WIFI Only as well.
How does the JME run on the tab?
Can you upload the exact JME rom you updated for us CDMA users who are kind of new at this? That is if you still have the version you edited for the Sprint?

If there's one thing I learned with flashing ****.... as long as you don't **** with the radio you can't really mess it up. With that said, don't flash a new modem (radio)

exactly then, cant we just have all these ROMs take out the Modem.bin, wouldn't it be flashable to CDMA then? or no

Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.

I have no experience in doing this so I was curious on just how someone would go about dumping the stock Sprint Modem? also would we be able to use the epic 4G's modem since it's similar? or would that not work due to the epic having 4G and being a different device? If I knew what direction to go I'd certainly be interested in getting in to this more.

Now if someone can just confirm how to flash without killing the modem, we'll be cooking with gas!
Morolinith said:
Yes it borked the GPS as I flashed with the modem file to get rid of sprint, works fine so far and I can use my Bluetooth mouse and keyboard now, had to reinstall all apps though.
I just Flashed Roto's JMG last night, will see how that goes.
I used the ROM from here http://forum.xda-developers.com/showthread.php?t=894763 and took out movinand with 7zip.
I assume you could take out the modem file as well or try the update version.
I would put in a request to Rotohammer to make one for the CDMA tabs without modem and movinand to be safe.
No idea if flashing without the modem file will fry the CDMA modem as I cant test this do to no one being able to get the stock Sprint modem dumped yet.
M.
Click to expand...
Click to collapse

I killed my modem but I need to figure how to get it to mount my sd card.
Sent from my DROIDX using XDA App

Sprint: SPH-P100 firmware
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit

paragpatil said:
I saw an article on: http://www.samsunguniverse.com/forum/topic56.html
and got a link from:[email protected] to donload the stock rom for flashing...
download site: http://depositfiles.com/files/elmpfgeel & http://fileshare.in.ua/4106185
This has 5 files:
SPH-P100.DJ30.tar
modem.bin
Odin3v1.31.exe
Odin3.ini
pit.pit
Click to expand...
Click to collapse
----------------------------------------------------------------------
I know that file name is floating around as a flashable "almost stock" ROM that has the Epic 4G modem inserted, so you can recover your sprint tab but lose gps. I would get someone who has already borked their gps by flashing to test it and see if it fixes it before everyone goes flashing this ROM.

If I was doing a restore using the files posted I would not flash the modem.bin. That's what breaks the Tab, not the software.

Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.

dfinney67 said:
Need help I bricked my Galaxy Tab by Sprint trying to flash Overcome. Now I am stuck at the Galaxy/Samsung screen of death. Computer recognizes sometimes and others not. Is there a way to get it into download mode again or a I screwed.
Click to expand...
Click to collapse
Well you can't get any worse, so try this file to load;
http://forum.xda-developers.com/showpost.php?p=11139968&postcount=10
Keep trying to get it into download mode, down volume and power depressed together.

CWM flashable radios?

Hi,
I'm under the impression that the radio is different from the modem, therefore my previous efforts to fix a problem with the auto-connection to HSDPA/3G were somewhat in vein. If I am correct in this, it could be the reason that my "phone information" settings won't stick (revert to default) and my phone, once connected to EDGE, will not automatically reconnect to HSDPA/3G.
Would someone be so kind as to point me in the direction of CWM-flashable radios? If needed, I am on the AT&T network (U.S.) with the international GT-I9000. ROM and kernel are in the signature, modem is JPY but flashing to the U.S. modem made no difference.
Thank you for your help or even your attention on the matter. I plan to write this up as a tutorial for this very problem should this solve the issue which I believe it will.

All the information you need is here:
http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945

It's telling me it's a bad link. I'll try to receive it through search and post the link if I get it.
EDIT: http://forum.xda-developers.com/showpost.php?p=9579987&postcount=11945
I flashed JPP to see if that can fix the issue as it's compatible with the U.S. I'll edit again once I go outside in order to see if it auto connects to HSDPA once I'm out there. It's a good test IMHO as I only have the 1900mhz band of wcdma therefore it doesn't penetrate the walls of my place of work.

edited the post above to fix the URL

I went out and checked. It still requires me to go into wcdma only and then back to wcdma/gsm in order to get hsdpa, also, the changes in phone information still don't stick. I need the actual radio file in a CWM flashable zip. Also, after changing modems to JPP, speed test doesn't work. I'll just uninstall from the market and re-install since the data connection is still works and see if there is any improvement on that front.

Which one is the radio file as opposed to modem file .
jje

EDIT: It's in the modem but not included with the modem as far as I know. Specifically, I need to flash a new Radio Image zip file. I found some through cyanogenmod but I'm not sure if it would be a good idea to use those as they may only be working with cyanogenmod ROMs.

Modems and CSC files flash from an update zip via the rom kitchin .
http://romkitchen.org/
http://forum.xda-developers.com/showthread.php?t=817703
jje

I edited the post. Those modems don't contain an updated radio image or any radio image, i think. It's more a matter of finding the right radio image file to flash.... http://forum.xda-developers.com/showthread.php?t=940095 It's midway through the first post. I'm not sure if I should flash it with Darky's ROM or not since it's cyanogenmod but I think as long as I switch to the JPY modem it should be fine.

Interesting.... I did some reading on the kitchen modems and apparently they flash a new radio image in the modem where others don't. I looked at my status through "about phone" and my IMEI SV changed from 01 to 02. When I get back outside to where I know I have HSDPA access, I will report on whether this fixes the lack of auto connect to HSDPA from EDGE.

There is no such thing as a radio for galaxy s devices, that is a htc phone term.
Instead, we have modems. The issue you're talking about is probably rom related.
Sent from my GT-I9000 using Tapatalk

So, you're saying a re-flash of the ROM then.... I think I've had this issue since Darky's 9.2 and I've flashed through the betas and I'm on 9.3 stable now. I have also done a wipe but not a repartition in Odin. I think Odin is a cleaner install then CWM but it's just so convenient to flash right from the phone. I guess I'll do that then.
Thanks.

not sure if i went flash correctly to GB 2.3.3

Hello
I used heimdall to flash the samfirmware Ginger bread rom
i wiped data from my phone but in about it says I900UGJK4 is the baseband
but build is GINGERBREAD.UCKF1, also going to download mode I still get the old digger android guy i thought the new was two computers
firmware says 2.3.3
Please help, not sure if something is wrong but it boots and works, just think its odd
Thanks

so what is the problem?
download mode didnt change the image shown
baseband is your MODEM
.....
not really sure what you think is wrong about it

I just wanted to make sure that it flashed correctly so I can try other GB roms, 1st I have to find a modem that works can not get or make calls
Thanks

that would be because of your modem. the samfirmware.com UCKF1 tar file includes a UCKF1 modem that will work for your setup.

Thanks never got the modem working that came with I reflashed just the modem to the correct one from Sammy I could nor hear people I called they could hear me but no sound heard from them tried to call me voicemail same thing. Gave up on official 2.3.3 kept bootloaders just flash another rom and now good. Also never got the H or the speed of hspda
Sent from my captivate using XDA App

[Q] Flashed with Overcome "Jupiter" great but "Phone Info" incorrect

[Q] Flashed with Overcome "Jupiter" great but "Phone Info" incorrect
Hi all, I finally managed to restore my original IMEI from a backup thankfully after I flashed with "Overcome - Jupiter", everything else is great except for this,
My IMEI SV is now 05 instead of orig. 01.
I still get no connection to Optus eventhough I get full bars of service & the YES OPTUS network info on screen.
I also notice when I enter code - *#1234# - my info is as follows
PDA : P1000BGJP4
PHONE : I9000UGJK3
CSC : P1000OXAJQ1
I am running a Samsung Galaxy Tab P1000.
Why is it saying PHONE : I9000?
Can anyone assist
Thanks

why you don't try to re-stock with safe gingerbread v5 from samsung and then flash overcome ?
now i checked *#1234# and all are ok ? i think you need to restock with safe gingerbread that will wipe everything

Because the JK3 modem was origionally from a samsung i900.
You can make the baseband anything by flashing a different modem.bin with odin.
Go to the development section, and find the modem stickie, and take any modem you like, I'm using JPD but I'm probably going back to JK3 today.

rangercaptain said:
Because the JK3 modem was origionally from a samsung i900.
You can make the baseband anything by flashing a different modem.bin with odin.
Go to the development section, and find the modem stickie, and take any modem you like, I'm using JPD but I'm probably going back to JK3 today.
Click to expand...
Click to collapse
So u recomend JK3? I am using the original modems that rotohammer used for the modem switch JL3 for the 2g+voice not sure wich one for the 3g, how can i change the modem to be used with modem switch. Thanks.
Sent from my GT-P1000 using XDA App

First, you will only be able to use a different voice+EDGE modem. The Roto-3G modem can't be substituted.
Try out the modem for a few days in your area to see if it will be better than the current modem.
If you want to make it your permanent voice+EDGE modem, copy it to the modemswitch folder, rename the Roto-2G modem something else, like Roto-rooter, then rename your substitute modem Roto-2G.
You can easily reverse the process.

[Q] Need help with bad signal (yes i have the right modem for my region installed)

Hey guys,
I have a problem with my phone, it is a Samsung Galaxy S I9000. I have android 2.3.6 running, it is stock firmware. Now i don't know the original firmware that was on it, and it was flashed with a custom rom before. I reflashed stock firmware which was:
Buildnumber: gingerbread.XWJVH
android version: 2.3.3
Baseband: I9000XXJVO
Kernel: 2.6.35.7-I9000XWJVH-CL 184813 [email protected] #2
I then updated via Samsung Kies, and came to this firmware:
Buildnumber: gingerbread.XWJW1
android version: 2.3.6
Baseband: I9000XXJVT
and its stock kernel (dont remember it)
I then flashed the most recent speedmod kernel for galaxy s:
kernel: 2.6.35.7-I9000XXJVT-CL617736 [email protected] #k16-11 (i used it to root my phone)
Now the problem is that the custom rom that was flashed was a 4.0 android rom. It worked, but then one time when the phone was just on (standby) it suddenly shutdown, and wouldn't boot back up. I tried reflashing the rom using the same (CWM) method as before but it still booted a black screen whenever i started it up. I then flashed another rom which did work. Eventually i went back to a stock rom and this is why:
I have a bad signal everywhere, with every modem (tried several, all for my region). I do not know exactly at which point the signal problems started in this story, but i need help fixing it. I do know that at the original firmware that was on the phone, signals were good.
With a bad signal I mean that I have zero, one or 2 bars reception, 3 bars when im at the attic of our house, and also a lot of times outside I have no service at all (at places where I should be having it).
-I already tried restoring the nv_data.bin from the .bak file.
-I already tried flashing different modems which i am sure of are for my region
-I am using a XEN csc file (im living in the netherlands)
-I already tried messing around with the band selection in service mode of the phone.
-My original IMEI is INTACT!
-My original product code is INTACT!
NOTHING WORKED!!!
I need help please, i thank the ones reading this entire story till the end! and I thank everyone for his or her response (hoping there are gonna be some)

Bump
Does nobody know the problem, since the topic has views but no replies? Can anyone help please?

it could be a hardware problem too..... !!!!! u better try different stock roms or different custom roms....... if there is still no solution then you should take your phone to the service center.
best of luck

@ zamiurratul
Yes I thought of that too, i'm having a handy friend of mine check out the antenna this evening, i'll report back on that later.

Got bad signal as well.
ever since i installed ICSSGS RC4.1
Tried flashing Devil's Kernel 1.0.
Problem is still here!
Any solution?
where can i get best Modem for this build, currently i am with i9000xxjvt?

y.trumper said:
Got bad signal as well.
ever since i installed ICSSGS RC4.1
Tried flashing Devil's Kernel 1.0.
Problem is still here!
Any solution?
where can i get best Modem for this build, currently i am with i9000xxjvt?[/QUOTE
have any backups? have you tried flashing a different rom? does your provider use 850 band? if no backups try a different rom, if provider uses 850 band try
jl2 modem or jk4. if your using cm or miui rom make sure the modems you are using are made for those roms.
Click to expand...
Click to collapse

OK, thanks this is first step.
Downloaded yaff explorer to browse my backup.
Where do I find my modem from backed up system?
And where can I find a flashable version of the modem?
Or alternatively, how do I know if my carrier uses 850?
Or, how can I find compatible modems for my ROM (ICS team)+ carrier?
Sent from my GT-I9000 using xda premium

http://forum.xda-developers.com/showthread.php?p=15443678 for the modems.
As for backup you'd have to restore the whole rom you were on previously. Either through ROM manager or in recovery.
Sent from my GT-I9000 using xda premium