Database Develop

[Q] How to get in Bootloader mode

I want my optimus black to go in fastboot mode.
I have tried Quick Boot and AnRebot from Google Play, but the apps just reboot the phone normally, when I press bootloader
Any suggestions how I can boot my phone in fastboot mode
EDIt: you can't get in fastboot mode.

AW: [Q] How to get Bootloader access
TJ1401 said:
I want my optimus black to go in fastboot mode.
I have tried Quick Boot and AnRebot from Google Play, but the apps just reboot the phone normally, when I press bootloader
Any suggestions how I can boot my phone in fastboot
Click to expand...
Click to collapse
There is no way yet... seems like lg removed that feature. What do you need it for?
Sent from my LG-P970 using xda app-developers app

Sv: [Q] How to get in Bootloader mode
N00BY0815 said:
There is no way yet... seems like lg removed that feature. What do you need it for?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the fast answer. Nothing I can't do with other methods, I just prefer fastboot
Sent from my LG-E975 using xda app-developers app

Fastboot Sticky Bit Fix

While in fastboot and plugged into use (using our special fastboot)
Code:
fastboot oem fb_mode_clear
That's it, no more Sticky Bit

What exactly does this do.
Sent from my MB886 using xda premium

TTLayland said:
What exactly does this do.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
That is also my question
Sent from my MB886 using xda app-developers app

If you've ever played with fastboot and afterward it booted into fastboot every reboot, this is the fix. If you have or had this problem you know what this does and how annoying it is.

One bit of advice make sure your using a Motorola data cable. I couldn't get this to work without one plus I couldn't do fast boot to push files or nothing
Sent from my MB886 using xda app-developers app

jlaird1990 said:
One bit of advice make sure your using a Motorola data cable. I couldn't get this to work without one plus I couldn't do fast boot to push files or nothing
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Very True. I've only used the usb cables that came with my Moto Bravo and Atrix HD. I prefer the Bravo one because its about 3 times thicker than the AHD cord. Or a Motorola Factory Cable....I really need to get one of those.

If you look inside your XML of the sbf it sets sticky to on. Then if something messes up during flashing you'll go right back to fastboot to do it all over again. Sometimes it gets stuck on of the off command doesn't execute and that's what the command in OP does.
Sent from my MB886 using Tapatalk 4 Beta

jlaird1990 said:
One bit of advice make sure your using a Motorola data cable. I couldn't get this to work without one plus I couldn't do fast boot to push files or nothing
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
That explains why I had to use rsdlite. Using an "Onn" usb cable from Walmart and fastboot complains about a download limit then fails on system.img
Sent from my MB886 using xda premium

darknessrise1234 said:
That explains why I had to use rsdlite. Using an "Onn" usb cable from Walmart and fastboot complains about a download limit then fails on system.img
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
The Download Size Error is from using the SDK's fastboot. You need to use the snapdragon fastboots or you'll get errors when flashing a lot of our partitions. Those are the only fastboots that fully work for us.

I used the fastboot from your thread, but I put it in the folder of my Kindle tools. That could be it.
Sent from my MB886 using xda premium

Found this over on the DroidRZR.com Forms,it worked for me where the single fast boot command wouldn't for some reason.
List of commands to type in. ( in order)
1. adb reboot bootloader
2.fastboot oem fb_mode_set
3.fastboot oem fb_mode_clear
3.fastboot erase userdata
4.fastboot erase cache
5.fastboot reboot
Hope this helps someone.

This thread is telling the fix in the op... Smh
Sent from my PACMAN MATRIX HD MAXX

No I get it,but the 1 fastboot command didn't work for me,i had to got through all the steps to get out of sticky fastboot.

device not found
TabascoTX said:
Found this over on the DroidRZR.com Forms,it worked for me where the single fast boot command wouldn't for some reason.
List of commands to type in. ( in order)
1. adb reboot bootloader
2.fastboot oem fb_mode_set
3.fastboot oem fb_mode_clear
3.fastboot erase userdata
4.fastboot erase cache
5.fastboot reboot
Hope this helps someone.
Click to expand...
Click to collapse
thanks for this one. but when i enter adb reboot bootloader it says device not found? what mode shall i go to?
thanks

Bricked Razr M

Hi, all. A friend gave me his son's RAZR M (Verizon, US) phone which he totally bricked. I've tried to reinstall a recovery partition, etc. using Motofail2go and Motopocalypse, to no avail. The Daemon runs and just hangs there. I have no way of knowing whether USB debugging was enabled on the phone. The phone stays at:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2013-03-22 09:18:22)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
Any ideas how I can get past this?
Thanks in advance.

have you tried to use rsd lite?

pbanj said:
have you tried to use rsd lite?
Click to expand...
Click to collapse
Yeah if you can get into AP fast boot try to rsd lite back to stock
Sent from my XT907 using xda app-developers app

since you can get into fastboot your should be able to salvage this. Can you get into stock recovery to verify if your rooted or not? what is happening when you try to run Motopocalypse to unlock the boot loader? Have you tried using Matts utility http://forum.xda-developers.com/showthread.php?t=2249773 to do all this work for you?

I had a similar error when I tried to downgrade my Electrify M by RSD'ing an early version of software. (I found out later its not possible to RSD "down") Anyhow, I was able to get rid of the "flash error" by flashing a new boot image. This "tricks" the bootloader into thinking all is fine. There's some info on flashing boot images here:
http://forum.xda-developers.com/showthread.php?t=2340764
As for Motopocalypse / MotoChopper etc., they need to be ran from a "booted" phone. If all else fails, RSD back to stock.

i think the razr m utility1.2 can save your phone http://pan.baidu.com/share/link?shareid=2491749448&uk=201633670

goodayoo said:
i think the razr m utility1.2 can save your phone http://pan.baidu.com/share/link?shareid=2491749448&uk=201633670
Click to expand...
Click to collapse
Im DOwnloading Now, I'll Tell You What Happens.
---------- Post added at 12:41 AM ---------- Previous post was at 12:30 AM ----------
jleznek said:
Hi, all. A friend gave me his son's RAZR M (Verizon, US) phone which he totally bricked. I've tried to reinstall a recovery partition, etc. using Motofail2go and Motopocalypse, to no avail. The Daemon runs and just hangs there. I have no way of knowing whether USB debugging was enabled on the phone. The phone stays at:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-1e9f557, 2013-03-22 09:18:22)
eMMC Info: Size 8GB
Device is LOCKED. Status Code: 0
Battery OK
Transfer Mode:
USB Connected
Fastboot Reason: Flash Failure
usb connected
Any ideas how I can get past this?
Thanks in advance.
Click to expand...
Click to collapse
You Dont Need USB Debugging To Be On To Do AP Fastboot, Device is LOCKED. Status Code: 0 Means That The Bootloader Is Still Locked.
Also Try To Use A Droid RAZR Utility.

Do you have the stock usb cable that came with the phone? I had the same issue with my phone; it might just need a charge..
Sent from my XT907 using xda app-developers app

I may be delayed but... if need be and the battery is dead you could buy a factory cable or the team black hat factory adaptor.... if budget is an issue make your own found here (http://forum.xda-developers.com/showthread.php?t=1077414) using a spare USB cable it does work I have made one used on the xt 894 and xt 912 I have yet to use it on the 907 yet I'm sure it works the same...
Sent from my XT907 using xda app-developers app

Down grading

Is It possible to get some ones back up of 7.3.0 and restore my 7.4.3 to it using the the fastboot cable?
Sent from my KFTT using xda premium

As long as u can boot up all the way you don't technically need a fastboot cable, but if you do use a fastboot cable, ignore the command it says to run on step 2. http://forum.xda-developers.com/showthread.php?t=1951254
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Help! Fastboot help please!

Sorry, not trying to spam but i wrote over my last thread. Anyway i need to get into fast boot on my kfhd 7 without a cable or fireflash. Is there an adb tool or fastboot tool, or adb command, ANYWHERE?
SPECS/CONDITION:
FireOS 7.5.1
Root? ROOTED
Custom Recovery? None
Additional details:
Soft bricked / stuck in boot loop, tried to change the launcher via actually pasting apex over the stock launcher in file explorer+root addon.
PC:
Windows 8
ADB? Yes
Fastboot drivers? YES
Determination? Yes
SDK? No, but available
please provide a download link, but if you vant its fine. Any help accepted
Sent from my Huawei-U8665 using XDA Free mobile app

I dont have SDK, but i can install it.
Sent from my Huawei-U8665 using XDA Free mobile app

Kindle Fire HD 7'' Red Screen
Hello, I came here to see if I can get some help with fixing my KFHD. The problem is, everytime I boot it, it shows a red screen and I have a fastboot cable so any assistance will be great.

hey mate. I have exactly the same problem. .did you solve it?
Sent from my GT-I9300 using XDA Premium HD app

Red screen I believe is a mismatched boot loader issue best I recall, I think using the fast boot cable and a restore utility is the quick fix.
Sent from my XT907 using XDA Free mobile app