BIG Problem with my LG P880 :S - LG Optimus 4X HD

Hello Guys,
i have bricked my Phone yesterday by deinstalling Google Movies and Google Books (yes I am a idiot). So today i wanted to flash the phone via kdz. So it works correct until my PC got a bluescreen... Then i wanted to flash again. So i put my phone in S/W Mode, but it shows the S/W Update logo foe 2 secs and then the screen turns black. After 5 more secs the LG starts to vibrate a lot. I cannot use the S/W anymore to restore it. I hope you can help my with this BIG Problem.

trapn said:
Hello Guys,
i have bricked my Phone yesterday by deinstalling Google Movies and Google Books (yes I am a idiot). So today i wanted to flash the phone via kdz. So it works correct until my PC got a bluescreen... Then i wanted to flash again. So i put my phone in S/W Mode, but it shows the S/W Update logo foe 2 secs and then the screen turns black. After 5 more secs the LG starts to vibrate a lot. I cannot use the S/W anymore to restore it. I hope you can help my with this BIG Problem.
Click to expand...
Click to collapse
which version you have?try to go in sw mode with battery in.Can you enter in recovery(press the "volume down" and "power" key to boot, do not release the volume down key until the screen appears with a red triangle robot)?

igorstoja83 said:
which version you have?try to go in sw mode with battery in.Can you enter in recovery(press the "volume down" and "power" key to boot, do not release the volume down key until the screen appears with a red triangle robot)?
Click to expand...
Click to collapse
i have normal lg 10h_00 version, i cannot go into recovery mode but it goes on with the akku, so the s/w update is still there.

trapn said:
i have normal lg 10h_00 version, i cannot go into recovery mode but it goes on with the akku, so the s/w update is still there.
Click to expand...
Click to collapse
try all steps for flashing kdz again with battery in and should be sucsses

igorstoja83 said:
try all steps again with battery in and should be sucsses
Click to expand...
Click to collapse
yes i really hope it, but thanks for your help, if it doesnt work i write in a few min.

trapn said:
yes i really hope it, but thanks for your help, if it doesnt work i write in a few min.
Click to expand...
Click to collapse
okay stuck on iparam = 708 with battery in...

It was same for me first but battery on when u connect battery than but it out than when u see parameters screen but the battery back
Sent from my LG-P880 using xda premium

trapn said:
okay stuck on iparam = 708 with battery in...
Click to expand...
Click to collapse
i had this problem too and solve it,dont worry,you not bricked your phone try to flash with this (easiest way) http://forum.xda-developers.com/showthread.php?t=2134192 , if you dont sucsses try to carefuly read instruction in this thread http://forum.xda-developers.com/showthread.php?t=2069723 somethimes you may to try several times
dont forget to click thanx button

igorstoja83 said:
i had this problem too and solve it,dont worry,you not bricked your phone try to flash with this (easiest way) http://forum.xda-developers.com/showthread.php?t=2134192 , if you dont sucsses try to carefuly read instruction in this thread http://forum.xda-developers.com/showthread.php?t=2069723 somethimes you may to try several times
dont forget to click thanx button
Click to expand...
Click to collapse
pc suite dont recognize my phone

Did you install drivers for your phone?and when plug your phone in pc check in settings and connection tipe check lg pc suite and turn on usb debbuging in developer settings
Sent from my LG-P880 using xda app-developers app

igorstoja83 said:
Did you install drivers for your phone?and when plug your phone in pc check in settings and connection tipe check lg pc suite and turn on usb debbuging in developer settings
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
i dont have connection to to android interface i cannot go into usb dubbing only in s/w mode the rest ist still broken

trapn said:
i dont have connection to to android interface i cannot go into usb dubbing only in s/w mode the rest ist still broken
Click to expand...
Click to collapse
Sorry my mistake.Try with second step again http://forum.xda-developers.com/showthread.php?t=2069723 and carefuly read instruction and dont forget to install usb drivers if you not say me if you sucsses

igorstoja83 said:
Sorry my mistake.Try with second step again http://forum.xda-developers.com/showthread.php?t=2069723 and carefuly read instruction and dont forget to install usb drivers if you not say me if you sucsses
Click to expand...
Click to collapse
doing it now the 5th time, same fail. stopped at iparam = 708 and phone doesnt automatically reboot, i do not understand that :crying:
t hink i have some prob as this sir: http://forum.xda-developers.com/showthread.php?t=2043847

trapn said:
doing it now the 5th time, same fail. stopped at iparam = 708 and phone doesnt automatically reboot, i do not understand that :crying:
t hink i have some prob as this sir: http://forum.xda-developers.com/showthread.php?t=2043847
Click to expand...
Click to collapse
That "sir", have a developer phone...
Try to flash with LGFlash Tool, look at this thread:
http://forum.xda-developers.com/showthread.php?t=2179126
If you go lower, on the 7th post, you'll find some files to download if you need them.
You can choose from the two methods posted there, 1st post (OP) or 7th post...
Good luck

RuedasLocas said:
That "sir", have a developer phone...
Try to flash with LGFlash Tool, look at this thread:
http://forum.xda-developers.com/showthread.php?t=2179126
If you go lower, on the 7th post, you'll find some files to download if you need them.
You can choose from the two methods posted there, 1st post (OP) or 7th post...
Good luck
Click to expand...
Click to collapse
i am doing your method now, lets have a look

trapn said:
i am doing your method now, lets have a look
Click to expand...
Click to collapse
okay looks like this if i select 3rd port it breaks up at 22% the others are still on 3%
http://www.abload.de/image.php?img=unbenanntv2zd2.jpg

trapn said:
okay looks like this if i select 3rd port it breaks up at 22% the others are still on 3%
http://www.abload.de/image.php?img=unbenanntv2zd2.jpg
Click to expand...
Click to collapse
ok if i start in usb mode then choose port 1 it breaks up at 22%

Just let it stay in UART, in port selection choose the first one you saw active. Pay attention to the guide
Sent from my LG-P880 using xda app-developers app

RuedasLocas said:
Just let it stay in UART, in port selection choose the first one you saw active. Pay attention to the guide
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
can you help me in skype? :*

trapn said:
can you help me in skype? :*
Click to expand...
Click to collapse
I don't use Skype... And right now I'm not at home, sorry. Pay attention to the guide, do it slowly and be sure your battery is almost fully charged.
Sent from my LG-P880 using xda app-developers app

Related

My LG OB bricked? :(

hello everybody. i have problem... today i restart my lg ob after changing theme in nova script(i had nova v8) and after this restart phone does not goes to the system. Its restarts normal, i saw lg logo but after that, instead of bootanimation i saw black screen with blinking touch keys(menu, home, back, search). I pulled of battery for few seconds and put it back...turn on phone and...the same... :/ next i goes to emergency recovery and flash nova8 again and guess what? still the same!!!! after lg logo black screen with blinking touch keys! i tried to flash stock s/w with kdz updater, i tried 10a and 10e version and still the same! do u have maybe some other ideas how can i try to flash this that would maybe help me? or maybe i have to sent phone to service?
sorry for my english
Try factory-reset via recovery.
miticogirl said:
Try factory-reset via recovery.
Click to expand...
Click to collapse
but now i dont have nova or cwm recovery ;/
try hard reset (search for it )
Download LGMobile Update http://forum.xda-developers.com/showthread.php?t=1111771 in this Update Kit. Then turn of phone, pull of battery and press and hold Vol+ button and plug in USB and then in LGMobile Update click on "Custommer Support" and Recovery Phone. Write your IMEI and click check. It can take a lot of time because it will download a new firmware.
fatcobrah said:
try hard reset (search for it )
Click to expand...
Click to collapse
how can i do hard reset if my phone does not boot to system? i tried software recovery in lg mobile update but it does not helped too ;/
miticogirl said:
Download LGMobile Update http://forum.xda-developers.com/showthread.php?t=1111771 in this Update Kit. Then turn of phone, pull of battery and press and hold Vol+ button and plug in USB and then in LGMobile Update click on "Custommer Support" and Recovery Phone. Write your IMEI and click check. It can take a lot of time because it will download a new firmware.
Click to expand...
Click to collapse
yep..i've done this twice but no luck ;/
Send phone to service, they will change your mainboard or they will give you new phone.
yeaa..thought the same... thanks for answers !
dzynio said:
yeaa..thought the same... thanks for answers !
Click to expand...
Click to collapse
try with KDZ Updater...
dzynio said:
yep..i've done this twice but no luck ;/
Click to expand...
Click to collapse
nah, keep on holding that volume up then plug in the USB. have you installed the USB drivers?
Turn your phone off. Use eRecovery! Turn phone on then repeatedly hit Vol Down key then do factory reset. If no luck use KDZ updater.
gabwerkz said:
nah, keep on holding that volume up then plug in the USB. have you installed the USB drivers?
Click to expand...
Click to collapse
yes, i plug usb cable to device with holding vol+ and 'sw upgrade, please wait...' screen appear. I tried again few minutes ago with kdz updater and via lg mobile update phone recovery and no luck. Phone is rebooting (black screen with blinking touch keys) when installing software on 90% ;/ of course installing software goes to 100% and says its completed and ok, but phone reboots on 90% ;/. I have installed all drivers, i tried on my laptop (win7) and my dad (win xp).
dzynio said:
yes, i plug usb cable to device with holding vol+ and 'sw upgrade, please wait...' screen appear. I tried again few minutes ago with kdz updater and via lg mobile update phone recovery and no luck. Phone is rebooting (black screen with blinking touch keys) when installing software on 90% ;/ of course installing software goes to 100% and says its completed and ok, but phone reboots on 90% ;/. I have installed all drivers, i tried on my laptop (win7) and my dad (win xp).
Click to expand...
Click to collapse
it's normal reboot on 90% and next go to 100%, i do that with windows XP and work...
fortunat0 said:
it's normal reboot on 90% and next go to 100%, i do that with windows XP and work...
Click to expand...
Click to collapse
so maybe its normal, but really...i've tried a couple of times with kdz and phone recovery by lg mobile and still the same, black screen, blinking touch keys. And i dont have eRecovery any more beacause i flashed stock s/w but it dont work ;/
that's a big hello of a problem.... I jonno what else u can do... if I were u then I would flash it again and again... then maybe for the customer care center... although I think ur warranty is being voided so u will not be able to repair it for free... let's hope for the best and let us know what happens next... best of luck...
Przykro ki kolego, nie naprawisz tego sam. Musisz odeslac telefon do serwisu LG w Mławie...
Sorry pal, you can't fix it yourself. You must send it to LG service centre in Mława (Poland)...
Sent from my LG-P970 using XDA Premium App
shourov said:
that's a big hello of a problem.... I jonno what else u can do... if I were u then I would flash it again and again... then maybe for the customer care center... although I think ur warranty is being voided so u will not be able to repair it for free... let's hope for the best and let us know what happens next... best of luck...
Click to expand...
Click to collapse
+1 for this. Flash and flash. Try upgrading to V10E via KDZ. Me thinks it's a bootloader problem. Does LG SECURITY TEAM appears or not?
Sent from my LG-P970 using xda premium
yeah..i flashed this several times...with kdz updater and by lg mobile update->phone recovery. I flashed 10A and 10E...results the same. I dont know how LG SECURITY TEAM looks like but i didnt see anything else besides LG LOGO--> Black screen with blinking touch keys and just Black screen with blinking keys (even without lg logo). I give up with this, there is no hope for this phone i think, today im sending this to the service. Thanks for helping me i will certainly write here what happend if i get phone back
I also stuck on the same thing
Really for that reason i hate LG Black

[Q] my GALAXY S plus dont wont turn on, is it Bricked,Please help....

my Galasy s Plus i9001 , dont wont to turn on after i instal new room from recovery mode
Please advise what can i do now.
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Still doesnt work
dr.wtf said:
do you get into the download mode? hold power, vol-, home
then you can flash with odin
Click to expand...
Click to collapse
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
mr_guitar_eg said:
I tried many times to download mode or recovery mode but no way it is not turn on , as it is doesnt have bateery,,,, please advise. Thanks in advance
Click to expand...
Click to collapse
See response in other thread:
If you are 100% sure you cannot enter download mode you really have a problem. Did you try checking the battery? And if you are 100% sure - search the forum, there's some posts about using a JIG to fix it, but most seem to have gone back to Samsung afaik...
What did you do to get your phone in this mode?! Give is some more info on what happened...
Thanks for your fast reply, please see the below details
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Try removing the battery and charge cable for a while (at least 30 minutes or so). I've not heard this happened before... and try charging with another cable and/or with another charger (for instance a laptop or some other usb device)...
mr_guitar_eg said:
First i rooted my device as xda wiki said,second i installed an arabic rom from the recovery mode, and it is installed succesfuly, and afterit roeboot, device not start, it seems dont have battery, no buttons work to wake up ths phone,,, any idea...???? I try to charged but nothing happened ,even the battery doesnt got hot,, Please advise,,,, thanks in advance
Click to expand...
Click to collapse
Arabic rom ??
Sent from my GT-I9001 using xda premium
rayiskon said:
Arabic rom ??
Sent from my GT-I9001 using xda premium
Click to expand...
Click to collapse
Good catch. What ROM did you exactly try to install??
Gingerbread 2.3 arabic
I think the problem that it is for smsung galaxy s not s plus
nikagl said:
Good catch. What ROM did you exactly try to install??
Click to expand...
Click to collapse
It is a miui rom with arabic language! My phone is from hungary as i live there, so it is europan ,
mr_guitar_eg said:
I think the problem that it is for smsung galaxy s not s plus
Click to expand...
Click to collapse
Never install mods, addons, ROMs, kernels or anything made for whole Another phone.
Yes, that's the problem. I'm very sorry to tell you but you just destroyed your phone's boot.img by installing wrong one. And the wrong boot.img wont let you do anything on your phone. There's no way you could enter to recovery or download mode or anything.
I have no idea about the JIG thing but when I hard bricked my phone, I took it to the reseller and got it fixed for free of charge
Is there a golden card method
Any idea if there is a golden card method to create an boot image to let the phone start again
mr_guitar_eg said:
Any idea if there is a golden card method to create an boot image to let the phone start again
Click to expand...
Click to collapse
Your phone is kind of dead now. You can't push a boot image to it 'cause computer doesn't recognize it properly. Bricked means your phone is just as useful as a brick. It wont turn on in any way and there's nothing else your phone would do.
The JIG costs only 2$ , if that doesn't get u into download mod then u can only revive ur phone with JTAG .
Sent from my GT-I9001 using xda premium
Any details about this 2 methods???
JIG on ebay...
http://www.ebay.pl/itm/USB-JIG-Dongle-unbrick-reset-mod-ROM-para-SAMSUNG-GALAXY-II-2-S2-i9100-ESPANA-/260928351223?pt=LH_DefaultDomain_186&hash=item3cc08aabf7
My advice is go see if u can repair it for free (warranty) , if not u can try the JIG to get u into download mode so u can flash via Odin (there are a lot of clips about JIGs on youtube) , if all that doesn't work JTAG is ur only hope (also there are videos about it on youtube).
Sent from my GT-I9001 using xda premium
Better Soluction
It ocurred me and I go to Movistar Shop and I said that it doesn't boot and I don't know anything and they give me another one with the guarantee.
Try and if not try with JIG ,
me 2, think you installed the wrong rom on the wrong phone..MIUEI rom is not out for the GT I9001, when i bricked my phone =1 medecin= www.broodplank.net (and check how to unbrick your I9001-article)
As the partition layout and even the filesystem is totally different I think you wiped away your bootloader and maybe also radio firmware. If this is your actual situation, it is ver very VERY unlikely you will get your phone alive with a jig. Don't know the partition layout of a 9000 but even the hardware is completely different. Not nucb hope left, very sorry.
Sent from my GT-I9001 using XDA App

[HELP] Briked phone

Hi Guys!
Yesterday I change the Sim Card on my phone. I power off it normaly and change the SIM. When I try to boot the phone again this didn't boot.
My case is the same as in this video, but I did not try to flash the device before (In the explanation of the video, the user says that he tried to flash a custom rom, In my case it was the original rom)
I had to attach a txt with link to Youtube (sorry)
I try to Flash with Odin. Apparently Odin flash the device correctly (with de original firm). But the result is the same, don't boot.
Anyone else did the same?
Is the display turning on?
If yes, where does it hang?
If no, it's a hardbrick and your ace is dead.
Sent from my GT-S5830 using Tapatalk 2
(Frank) said:
Is the display turning on?
If yes, where does it hang?
If no, it's a hardbrick and your ace is dead.
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Yes, the display turn on (same as you watch in the end on the vídeo); the device turn on the screen and then turn off (< 1 sec) and don't shown nothing (No Samung Logo or Galaxy ACE...) . But the phone boot in "downloading ..." mode and "RAMDUMP" mode.
Thanks for your reply :good:
gokuhs said:
Yes, the display turn on (same as you watch in the end on the vídeo); the device turn on the screen and then turn off (< 1 sec) and don't shown nothing (No Samung Logo or Galaxy ACE...) . But the phone boot in "downloading ..." mode and "RAMDUMP" mode.
Thanks for your reply :good:
Click to expand...
Click to collapse
Do you reach revovery? Home+power button. If yes, do a factory reset, and reboot. It should work.
If this doesen't help try flashing this firmware with odin XWKB7. It's 2.2.1 Froyo (4 files and multi-CSC, how to: http://droidangel.blogspot.hu/2011/05/samsung-galaxy-ace-s5830-original-stock.html), and after that flash a 2.3.6 firmware.
kmarci said:
Do you reach revovery? Home+power button. If yes, do a factory reset, and reboot. It should work.
Click to expand...
Click to collapse
No, the phone don't boot in recovery.
I like to try the first firmware in the first link (to hotfile) but it's down. Can you send me in a PM? Thanks!
gokuhs said:
No, the phone don't boot in recovery.
I like to try the first firmware in the first link (to hotfile) but it's down. Can you send me in a PM? Thanks!
Click to expand...
Click to collapse
I'm working right now, so I can not open a lot of sites. Use google, search for XWKB7. I guess, you will find a working link.
kmarci said:
I'm working right now, so I can not open a lot of sites. Use google, search for XWKB7. I guess, you will find a working link.
Click to expand...
Click to collapse
Yes, sorry I use google and I find them. And I flashed with Odin and he situation did not change. The phone don't boot. .
Tanks for your Replies!
i think as per your comments....your phone's hardware is damaged internally...as you have no try to flash a rom...how is it possible ? to brick a phone ? go to samsung service center and get it repaired...
asking said:
i think as per your comments....your phone's hardware is damaged internally...as you have no try to flash a rom...how is it possible ? to brick a phone ? go to samsung service center and get it repaired...
Click to expand...
Click to collapse
Yeah, maybe that's the right way. Bring it to the service, but do not tell them anything about odin and firmwares, even about sim card. Just tell them that you used the phone it suddenly stop responding than turn itself off, and since than you cannot turn it on... Or something like that.
Thanks guys!
This afternoon I will send the phone to Samsung to give me budget...
Thanks for your replies!

[Q] LG990 won't boot.

I installed a rom called Eaglesblood from ROM Manager.
When it was all installed, the phone just loops and won't start. The only thing that is showing is the Eaglesblood logo. I tried to boot ROM Manager, but it wont start since the LG logo is not showing.
Is there anything I can do?
One more thing, I tried to connect it to the computer and it is charing, but it does not show as any device on the computer though.
You must wipe your phone before installing a new rom, otherwise you can get bootloops, try it good luck
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
You must wipe your phone before installing a new rom, otherwise you can get bootloops, try it good luck
Click to expand...
Click to collapse
How do I wipe the phone?
pankie91 said:
How do I wipe the phone?
Click to expand...
Click to collapse
search around, there's a few very good guides on this and other forums.
You must reboot in cwm and there you can wipe the phone... in option advanced are mire wipe option, best way to install a custom rom is making a fullwipe.. whatch in xda there are many guides for this.
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
You must reboot in cwm and there you can wipe the phone... in option advanced are mire wipe option, best way to install a custom rom is making a fullwipe.. whatch in xda there are many guides for this.
Click to expand...
Click to collapse
I tried to access the CWM by holding the Power and -Vol on the phone. The phone just boot up and doesn't even go into the cwm. The Eaglesblood logo just repeats all over.
I can take pictures if you like, if it is easier to understand.
Is there anyway to access the phone by USB? I can't even find it on the PC when I plug it in, it just charges itself
Hold down the buttons longer
Sent from my LG-P990 using xda app-developers app
Neefy said:
Hold down the buttons longer
Click to expand...
Click to collapse
I gave this a try before, in like 10 minutes. It doesn't do anything, just the EaglesBlood logo is flashing in a loop.
Hold down the volume down key and the power button, this have to work..
Sry dont see that you tryed this already, try to recovery with nvflash
Sent from my Optimus 2X using xda app-developers app
pankie91 said:
I gave this a try before, in like 10 minutes. It doesn't do anything, just the EaglesBlood logo is flashing in a loop.
Click to expand...
Click to collapse
Try volume key up
Using A5
Sent by XDA Premium
If you are unable to recover your phone you can always use NVflash. It will flash one of the first Froyo versions on your phone. Then you can root it, install ClockworkMod and install any ROM you like.
http://forum.xda-developers.com/showthread.php?t=1007825
It's low level flashing so use it only when there is no other option.
Itaka06 said:
Hold down the volume down key and the power button, this have to work..
Click to expand...
Click to collapse
Done this a few times, isn't there any other way to wipe the phone?
coolprateek.kumar said:
Try volume key up
Click to expand...
Click to collapse
Tried this, with the power on. Nothing happens, just the continuous loop.
BlackDragonPL said:
If you are unable to recover your phone you can always use NVflash. It will flash one of the first Froyo versions on your phone. Then you can root it, install ClockworkMod and install any ROM you like.
http://forum.xda-developers.com/showthread.php?t=1007825
It's low level flashing so use it only when there is no other option.
Click to expand...
Click to collapse
Thanks! But I still have an error trying to connect my phone to the computer. The USB is charing the phone, but the computer won't recognize the device. It doesn't even popup anything.
I have windows 8 on my desktop, and I tried to plug it in the laptop aswell, but it doesn't do anything. And yes, I have the LG drivers installed already.
If you remove battery and you push vol down key and power button and you connect to usb then you get into recovery mode?
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
If you remove battery and you push vol down key and power button and you connect to usb then you get into recovery mode?
Click to expand...
Click to collapse
No, it doesn't. The LG logo is just flashing then it turns black and repeats itself like that.
However, i tried only to hold down the vol-down button and plugged the USB in and then it starts something saying:
"S/W Upgrade please wait while upgrading..." but it does not show up on the PC as if it was connected.
Yes, so try to reflash cwm.. look at the guids in the section android development..
Sent from my Optimus 2X using xda app-developers app
---------- Post added at 07:29 PM ---------- Previous post was at 07:22 PM ----------
Last idea i have is to reflash stock and then to start new.. try this tutorial, original rom you find in xda
http://forum.xda-developers.com/showthread.php?t=1008070
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
Last idea i have is to reflash stock and then to start new.. try this tutorial, original rom you find in xda
http://forum.xda-developers.com/showthread.php?t=1008070
Click to expand...
Click to collapse
I'm very thankful for linking me this, but the problem still exist that I can't find my device on Windows. If i remember correctly, the USB connection to the phone stoped to work when I fixed root access to the phone and the CWM.
Is there anything I can do to fix this USB connection issue?
Try this, you can get to the stock via s/w upgrade and smartflash this must work, there is a completr tutorial how to get on stock via smartflash. I hope i can help
http://android.stackexchange.com/qu...-lg-optimus-2x-p990-back-to-stock-lg-software
Sent from my Optimus 2X using xda app-developers app
Have you tried a different USB cable? My LG cable went bad on me and I could still charge with it but I have to use another cable for connecting to the computer.
His cable works, otherwise he can't get to s/w mode.. try the tutorial with smartflash i send you in the last post
Sent from my Optimus 2X using xda app-developers app

*NEW* girlfriend's BRICKED Optimus Black. REVIVING METHOD?

Its maybe 4 months since she bricked her OB to death:
>>>no lights when charging
>>>cant boot to recovery or any other boot or S/W upgrade
>>>she cant remember what she exacly did.
###### she told me she installed some cm9 or 10 rom way back then and formatted system ,data,emmc and something like that...
###### its like the EMMC PROBLEM I got on GALAXY NOTE GT N7000 that when you do wipe data on unsafe kernel, you will BRICK your Phone to death <<see death meaning above :thumbup:>>
is there some WorkAround for it?
no warranty because its over...
LG service center is toooo far because its a 10 hour drive to nearest LG service center.... (mainly becuse of Poverty)
and I may have a very gooooooood February 14 if I can bring it to life...
for LOVE of VALENTINE give me hope... :thumbup::beer:
<3 <3 <3
Recognized Distributor™
did u try to flash it with a rooted stock rom with lg smart tool ,, this should work
cant go to s/w upgrade mode..
Recognized Distributor™
any help would be appreciated.. :thumbup::thumbup:
Recognized Distributor™
its March now so you know what happened...
Sent from my GT-N7000 using Tapatalk 2
noteandfound said:
its March now so you know what happened...
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Take it to LG center bud.
noteandfound said:
any help would be appreciated.. :thumbup::thumbup:
Recognized Distributor™
Click to expand...
Click to collapse
have you tried to download LG Mobile Support Tool?
Install it, Open it then remove the battery for a second, put it back long press on VOLUME UP while inserting USB CABLE then on top of that tool look for RECOVERY enter your phone's IMEI and Model press OK and wait.. .
same problem
JastaPein said:
have you tried to download LG Mobile Support Tool?
Install it, Open it then remove the battery for a second, put it back long press on VOLUME UP while inserting USB CABLE then on top of that tool look for RECOVERY enter your phone's IMEI and Model press OK and wait.. .
Click to expand...
Click to collapse
hi i also have the same problem but in my case i can put the phone in s/w upgrade mode and when its in update process already it stop and says restart and when i restart it it says the same again,i try it already for many times but still it says restart,what should i do?
AW: *NEW* girlfriend's BRICKED Optimus Black. REVIVING METHOD?
ginshaker22 said:
hi i also have the same problem but in my case i can put the phone in s/w upgrade mode and when its in update process already it stop and says restart and when i restart it it says the same again,i try it already for many times but still it says restart,what should i do?
Click to expand...
Click to collapse
Use smartflashtool and maybe check your drivers and if you are able to, try it at another pc as well.
Sent from my LG-P970 using xda app-developers app

Categories

Resources