Database Develop

[Q] my device is not booting. help

Hi guys,
i have my I9000 upgraded to froyo and rooted without any problem. it had vodoo lagfix also with no problem
today, i installed (( galaxy s tweaker )) app and i dont remember waht i did but the device then shut down and reboot but it stuck to the boot screen that contains galaxy and samsung logo and it keeps restarting the same screen many times and nothing further happens.
i tried the recovery mood ( factory reset, restore, format ) but nothing works.
i tried to connect it to my pc and reinstall the rom from odin but odin is not recognizing my device even in downloading mode and i got this notification from windows that usb device was not recognized ..
please please please, help me
thank you in advance

life art said:
Hi guys,
i have my I9000 upgraded to froyo and rooted without any problem. it had vodoo lagfix also with no problem
today, i installed (( galaxy s tweaker )) app and i dont remember waht i did but the device then shut down and reboot but it stuck to the boot screen that contains galaxy and samsung logo and it keeps restarting the same screen many times and nothing further happens.
i tried the recovery mood ( factory reset, restore, format ) but nothing works.
i tried to connect it to my pc and reinstall the rom from odin but odin is not recognizing my device even in downloading mode and i got this notification from windows that usb device was not recognized ..
please please please, help me
thank you in advance
Click to expand...
Click to collapse
Im guessing kies does'nt kies reconize phone? maybe uninstall then reinstall kies which will reinstall drivers. Have you tried pulling out the battery for 10mins and then retrying?

hi tragusman
unfortunately, both kies and odin dont recognize my phone though i tried to reinstall kies .
i tried to remove the battery for hours but it didn't work also

life art said:
hi tragusman
unfortunately, both kies and odin dont recognize my phone though i tried to reinstall kies .
i tried to remove the battery for hours but it didn't work also
Click to expand...
Click to collapse
If you can get into download mode then Heimdall will be able to detect your phone using either Windows or Linux. Heimdall works on OS X also however a fixed bootloader is required.

update:
i installed the driver on my pc from softpedia
i restarted my pc and odin can recognize my phone now
i flashed froyo rom and its not working . i will try another rom and see what will happen
i installed 2.1 rom followed by 2.2 rom and its working like a charm
problem solved
thanx

[Q] bootloader problem think i brick phone but it acts wierd when conected to pc

so a couple days ago i was about to put on a custom rom to my captivate.. but first the 3 download buttons doesnt work so i put it in download via adb.. for my suprise when in download i uloaded a wrong bootloader or kernel to the phone so now every time i try to boot the phone it onl shows at&t logo then diferent samsung logo(not the original S) and loops for ever..! and if i try to connect phone to computer via usb it shows the battery power,then vibrates, then shows an empty battery with a yellow sign /!\ and a temperature meter.(all that in a loop also). any ideas? i already try making my own jig but no download mode.. ando pc only recongnize sometimes a intel flasing device instead of a phone... HELP...!

inchewazu said:
so a couple days ago i was about to put on a custom rom to my captivate.. but first the 3 download buttons doesnt work so i put it in download via adb.. for my suprise when in download i uloaded a wrong bootloader or kernel to the phone so now every time i try to boot the phone it onl shows at&t logo then diferent samsung logo(not the original S) and loops for ever..! and if i try to connect phone to computer via usb it shows the battery power,then vibrates, then shows an empty battery with a yellow sign /!\ and a temperature meter.(all that in a loop also). any ideas? i already try making my own jig but no download mode.. ando pc only recongnize sometimes a intel flasing device instead of a phone... HELP...!
Click to expand...
Click to collapse
You might need to buy a jig
Sent From My Cappy Using Tapatalk 2

mmm i made my own with the resistancees and all but it doesnt seems to work on the phone and also i havnt found something about the battery with the yellow sing and the temperature logo

inchewazu said:
so a couple days ago i was about to put on a custom rom to my captivate.. but first the 3 download buttons doesnt work so i put it in download via adb.. for my suprise when in download i uloaded a wrong bootloader or kernel to the phone so now every time i try to boot the phone it onl shows at&t logo then diferent samsung logo(not the original S) and loops for ever..! and if i try to connect phone to computer via usb it shows the battery power,then vibrates, then shows an empty battery with a yellow sign /!\ and a temperature meter.(all that in a loop also). any ideas? i already try making my own jig but no download mode.. ando pc only recongnize sometimes a intel flasing device instead of a phone... HELP...!
Click to expand...
Click to collapse
You're definitely not hard bricked since your phone still does something when it's plugged in -- so there's hope. Keep trying your homemade jig and see if that works eventually (it's very frustrating trust me). USB combos don't work for download mode?

[Q] CM10 Stuck at bootloop, can't enter recovery, and computer doesn't detect

So I've seen a lot of threads on here with this kind of problem but none of the solutions work for me.
I just flashed CyanogenMod 10 nightly, was tinkering around on it, rebooted and I was just stuck in a bootloop. I can't get into recovery but I can get into download mode. However, my computer just doesn't detect the phone at all. I can't get Odin to detect it to flash a new bootloader or anything. I've tried installing Nexus drivers and everything. It just doesn't even detect that anything has been plugged into the computer. But the usb powers on the phone. If I plug into power I just get a spinny loading wheel that doesn't move and refreshed every few seconds.
I'm stuck. I can't get into recovery to flash, and I can't get my computer to detect it to flash. Help me please?
EDIT:
Okay so tried 3 different USB cables and I've found one that works. I tried flashing a new bootloader but I used the bootloader bit on Odin instead of pda (total noob mistake) now my screen is just black and won't turn on. I can get into download mode to flash stuff again. But what do I need to put in the bootloader section to get it back to normal?

I think you have to start from Gingerbread again
Search on samifirmware a 3 files firmware of Android 2.3.6
After that search on google a Step by Step guide how to flash a Rom with Odin.
I think after that i should work.

ChrissehB said:
So I've seen a lot of threads on here with this kind of problem but none of the solutions work for me.
I just flashed CyanogenMod 10 nightly, was tinkering around on it, rebooted and I was just stuck in a bootloop. I can't get into recovery but I can get into download mode. However, my computer just doesn't detect the phone at all. I can't get Odin to detect it to flash a new bootloader or anything. I've tried installing Nexus drivers and everything. It just doesn't even detect that anything has been plugged into the computer. But the usb powers on the phone. If I plug into power I just get a spinny loading wheel that doesn't move and refreshed every few seconds.
I'm stuck. I can't get into recovery to flash, and I can't get my computer to detect it to flash. Help me please?
EDIT:
Okay so tried 3 different USB cables and I've found one that works. I tried flashing a new bootloader but I used the bootloader bit on Odin instead of pda (total noob mistake) now my screen is just black and won't turn on. I can get into download mode to flash stuff again. But what do I need to put in the bootloader section to get it back to normal?
Click to expand...
Click to collapse
Nothing. Never put anything in the bootloader section. Instead, look for a rom that has bootloader in it. I believe that the darky resurrection rom has bootloader.
Sent from my Nexus 7 using Tapatalk 2

I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
I've managed to fix it in the following way:
1. I've downloaded the Semaphore kernel for JB (Semaphore ver. 2.6.0), and unpacked it.
2. I've used heimdall: `heimdall flash --kernel zImage`
3. After that the phone boots and CM finishes the upgrade as usual. (I've did not lost anything from my data.)
(Environment data: OS: Ubuntu 12.04, Heimdall 1.3.2)

Boot loops with cm-10-20121125-NIGHTLY-galaxysmtd & cm-10-20121126-NIGHTLY-galaxysmtd
frantique said:
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
Click to expand...
Click to collapse
Thank you very much for the information!
I was thinking I did something wrong... :crying:
Update:
The newer versions cm-10-20121129-NIGHTLY-galaxysmtd & cm-10-20121130-NIGHTLY-galaxysmtd are OK again.
With kind regards
Joe

frantique said:
I had the same issue with cm-10-20121125-NIGHTLY-galaxysmtd (after with cm-10-20121126-NIGHTLY-galaxysmtd as well!),
symptoms: after automatic install of mentioned version the phone rebooted, but I've got stuck in bootlop, and I couldn't enter in Recovery Mode, just in Download Mode.
I've managed to fix it in the following way:
1. I've downloaded the Semaphore kernel for JB (Semaphore ver. 2.6.0), and unpacked it.
2. I've used heimdall: `heimdall flash --kernel zImage`
3. After that the phone boots and CM finishes the upgrade as usual. (I've did not lost anything from my data.)
(Environment data: OS: Ubuntu 12.04, Heimdall 1.3.2)
Click to expand...
Click to collapse
I want to buy you a beer Thanks a ton
I did this on windows 7 x64 without any problems (I had to install driver from heimdall suite)

Same here, but computer WON'T detect, normally does
Hi
I'm desperate, no phone, stuck on galaxy S boot screen, will boot into download mode but not recognised by computer
Any ideas?
Thanks

[Q] Samsung logo freeze, cant recovery, can download mode (cant join to pc)

Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012

Samsung logo freeze, cant recovery, can download mode (cant join to pc)
try with different usb cable
daniga74

Fariel2012 said:
Hello everyone I am sure that there is a lot of this thread going.
But I think mine is even worse.
the problem:
I rooted the device, everything worked fine ( did it with card reader - because my pc can not recognize the device had the problem a long time ago, somehow it worked then, but does not now, giving me the code 10 and 43
I think my USB port on the SAMSUNG might be damaged, because it does recharge but wont connect at all, tried kies, tried all the debugging modes, drivers, turning off the computer, rebooting all that stuff..)
The main problem is I flashed the cwm, rebooted, worked fine, then I clicked the do Backup thing and from then I can only go to yellow "downloading" or samsung logo, cannot even use that "Odin" because my USB is apparently damaged.. Any Ideas at all other than taking the phone and throwing it into the dumpster?
it is gt-s5830
my system is Win7-64bit
any help will be deeply appreciated ...
sincerely Fariel2012
Click to expand...
Click to collapse
Hi there
you will need to give a usb jigg service to your device and then flsah it back to stock using odin

SGA s5830 stuck @ boot logo
I follwed these steps before it stuck @ boot logo
1 rooted phone through root_S5830.zip file
2 then used 6.0.4.6-cooper_fix.zip cwm recovery
3 decided to flash Touchwiz-Resurrected_ROM_V1.0.zip rom
4 followed all steps to flash thrrough CWM recovery
phone reebots samsung.com logo>> samsung boot animation shows up>>samsung name appears again keeps glowing and phone restarts!!!
after it I tried 6-7 different roms then i tried to flash through odin but wasnt able to do so but failed the device showed up in odin but wasnt able to flash stock rom
then i decided to go for Phil touch recovery I installed Philtouch recovery and tried to flash a custom rom now I'm stuck again at boot name GALAXY ACE s5830 nothing goes further!!!
I searched over XDA and some guy quoted this problem is solvable by using odin and putting phone in downloading mode (vol- button+home button + Power on ) I am able to put my phone in downloading mode, but when i conncet it to PC it says USB device not recognized WTF!!!!!???? 10 mins ago i connected my Phone using same cable same port same odin now this ***** appears ???
I swapped PC's, Cables, ports everything nothings working , phone wont start stuck @ boot logo pls help ASAP :crying:

That's it.. You have hard bricked your phone that's dead recovery and dead download mode. Give your phone the usb jigg service which will force it to go to either the download mode or the recovery mode whatever you want.

s3 mini does not turn on!!

Hello
I have a mini S3 and went to install CyanogenMod on it but the ODIN stopped in the middle of the installation, causing the Android stay corrupted and whenever I called this message appeared: "firmware upgrade encountered an issue. Please select recovery mode in kies and try again "
So I downloaded the original S3 mini according to my country and everything and I install ROM, well, the installation took place correctly but leave it stuck in boot start screen showing the phone model, then I install the ROM again but the ODIN stopped again and there came the problem ...
it does not turn on the power switch and the only way to 'make it light up the screen' is connecting the USB, but when I plug the cable it gets on and off the screen repeatedly at the "firmware upgrade encountered an issue. Please select recovery mode in kies and try again " until I remove the cable and the phone turns off completely.
I hope you guys understand my problem and can help me please.
Already grateful : )! (sorry my english)

Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu

Can't power on and enter on recovery menu
JanniekM00 said:
Try another computer or another cable. If it is stuck at boot screen, do a wipe/factory reset in recovery menu
Click to expand...
Click to collapse
I can't do wipe/factory reset in the recovery menu because i can't power on at all. It keeps only blinks (on and off) all the time when its plugged on PC or charger.
Thanks very much for your support!

Did you see the s3 mini logo if you turn on the phone. If you see this works download mode then? if not then your phone is bricked....

When you try and turn the phone on does it display the phone name? Or does nothing happen? If you get nothing then I'm afraid it's bricked. I'd try a different computer, different lead and possibly a different windows os. Then try and flash a stock rom using odin and be 100% sure it's for the model of the phone you have as there's loads of variants of the s3. Other than that, I can't help you any further

Hi everyone,
At first sorry for my english. I`m Dawid from Poland
OK, so i have gt-i8190N and when i trying to turn it on i see only white screen. Screen is ok because i can run phone in download mode.
Of course everyone says " so try to flash rom by odin" but i can`t because in odin i have error "FAIL Get PIT for mapping There is no PIT partition". I was try to flash rom with PIT file (to i8190N and i8190) but without succes.
Are anyone have the same problem?
I was try OneClick also.
Thanks for any answer.