Related
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
adobih said:
Hello Folks,
First I have to say that I watched the noob video and read everything about E:Error in /mnt/sdcard/cm-10.0.0.-galaxysmtd.zip (Status 7) on this forum and what google gave me.
My situation:
PC OS is Windows 7 64bit (if someone needs to know)
Phone:
Samsung Galaxy S GT-I9000
SSN: I9000GSMH
What happend:
I bought a used phone about two months ago with latest installed stock rom 2.3.5 it is. Then i downloaded cm-10-20121126-NIGHTLY-galaxysmtd and followed the instructions on wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. I installed CWM with Heimdall Suite. Everything worked well.
Today I decided to install a newer version of CM, I downloaded the cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd and copied them both on the phone memory. I turned off the phone and turned it on in recovery mod, and I got the recovery mode that was on cm-10-20121126-NIGHTLY-galaxysmtd installed. It wasn't the standard CWM that I installed with Heimdall Suite. I wiped with it data and cache and installed cm-10-20121210-NIGHTLY-galaxysmtd and then rebooted the phone. But the phone got stuck and didn't want to reboot. So i tried to go to recovery mod again to reinstall the cm-10.0.0-galaxysmtd but the phone couldn't access the recovery mod anymore.
After that I reinstalled with Heimdall Suite the ClockwordMod Recovery v2.5.1.0 SpeedMod Kernel like the first time I did. and successfully booted to recovery mod and again wiped cache and data and tried to install cm-10.0.0-galaxysmtd when i got the error
This is the image, just copy/paste in address bar.
imageshack.us/f/685/07032008448.jpg
So, now my phone has no OS installed.
There are some other issues too, I can't mount my external sd card in CWM, why, I don't know, so I only have cm-10-20121210-NIGHTLY-galaxysmtd and cm-10.0.0-galaxysmtd on my phone memory to install.
I would really really like if someone could help me to solve my problem, I have no other phone. And please when you tell to install something give me the needed link because I really downloaded a lot of things that didn't work.
Click to expand...
Click to collapse
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Samtan4326 said:
you having the wrong CWm installed, you can go to this link to download the cf-root kernel. http://forum.xda-developers.com/showthread.php?t=788108 hope this will help .
BTW when flashing JB from GB you need to flash CM9 then follow by CM10, if you can try flash it from GB 2.3.6 (E.g xxjvu)
i try flashing JB from GB is work if i flash twice but i got missing IMEI. so i suggest you following this step to flash.
GB(stock rom with ROOT) - ICS(CM7) - JB(CM10)
Click to expand...
Click to collapse
First off all thanks for helping.
I tried this one:
CF-ROOT-4.4-I9000BGJW5-1187857
CF-Root-4.4-I9000BOJW6-CL1177078
CF-Root-JP6-v1.2-Busybox-1.17.1 (this one didn't want to start recovery at all)
CF-Root-XX_OXA_JW4-v4.4-CWM3RFS
all I got from all of them is this
imageshack.us/f/805/08032008449.jpg (copy link to address bar )
Member Chainfire said "THIS IS NOT A ROM - it is only a kernel. You need to have a firmware already on your device"
I don't know really what that means. Probably that I have to install something else too, but what ?
Please can you tell me ?
And which of these CF-Roots is the right one, or the newest one, or how do recognize that ?
Thanks everyone who helps me.
eba
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After it's done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
adobih said:
Well, I solved my problem, now i have cm-10.0.0-galaxysmtd ROM installed. If someone has this problem, this is one way how to solve it (but doesn't mean it's the best one).
If you have no ROM installed on your I9000 and don't know which kernel to use, try this way:
Watch this video on YouTube that user "Puggered UK" uploaded:
youtube.com/watch?v=iRnH13sRAIc
- You can skip to 1.52 because you don't have any ROM on your phone, and download the EZ Odin package from the link in the About section (4shared.com/archive/TuHUfVjA/EZOdin.html).
- Start EZ Odin, put the PIT, PDA, PHONE and CSC file in the right box, connect your phone in download mode to the PC and press START, and wait till the process is complete.
- After a while you should have Android 2.3.? installed on your phone.
- Update Google market to Google play, then update ROM Manager, and start ROM Manager. Choose to Flash Clockwork Mod Recovery, choose your phone and flash it.
- Copy on your internal sd memory cm-10.0.0-galaxysmtd that you downloaded from CyanogenMod web site.
- Restart your phone in Recovery mod, wipe data/cache, and install cm-10.0.0-galaxysmtd from internal sd card.
- Then, when it's done restart the phone, and do the last step again in Cyanogen CW recovery.
- After is done, restart the phone and you will have CM 10 on your phone installed.
Or just watch the video and you will se what to do.
Click to expand...
Click to collapse
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
beckzz said:
hey,
had that problem too, yesterday. will try your suggestions later and report back!
hope it helps...
Grz
Click to expand...
Click to collapse
Well, I help you as much as I can and know, just write me where you stuck. And if you have some difficulties explaining it in English, dann kannst du mir auch auf deutsch schreiben, das verstehe ich auch
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & -->release buttons the moment u see bootanimation<--) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough). If not getting into recovery with waiting the first time just try to keep getting in recovery with 3 button combo & wait a couple of minutes. Eventually it does. I had the same thing 2 months ago coming from jb-->ics-->cm10, thats how I remembered.
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen. Didnt wipe nothing in between the flashing
Then flashed gapps & voila
Donovan662 said:
I had this status 7 thing 2 yesterday while installing cm10. It also seemed I couldnt get into recovery. What I had to do is flash the zip 4 times. First time it got stuck at boot.
So I took battery out & try to get in to recovery (volume up+home button+power button & release buttons the moment u see bootanimation) but it started bootlooping/got stuck again.
So I took battery out again, did the 3 button combo for the second time & I waited a little longer, a minute maybe 2 & it went to recovery. (I guess the first time it didnt went straight to recovery like it normally does, I wasnt patient enough)
Didnt wipe a thing just went straight to the zipfile & flashed it in total 4 or 5 times till it said install completed on the screen
Then flashed gapps & voila
Click to expand...
Click to collapse
I tried like hundred times or more, but every time with the same result and I also tried with different kernels without success. Maybe some other error caused your status 7 error than mine. But anyway, it's always good to try all possibilities to resolve the problem.
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Donovan662 said:
Haha I went crazy not getting into recovery 2 months ago I did it at least 15 times till it eventually got into recovery. Weird cuz I released it the moment I saw cyanogen boot animation. I had to wait a lil longer after releasing so it seems & better timing maybe but only with flashing cm10 from stock. The error was the same tho I saw your picture
Click to expand...
Click to collapse
Unfortunately I wasn't that lucky, but I tell you something else. Now I know that no matter what I do and how badly i brick my phone I can always use that method to bring it to life back. So it's kind of final help that works if nothing else works
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Donovan662 said:
by the way did you apply sdcard:update zip? Or choose zip from sd card?
Click to expand...
Click to collapse
I choose zip from sd card because I forgot to rename the file before copying to sd card, and when I lost my bricked my phone it was already to late to rename it. But i don't think that that was the problem, I mean it's just a name string that has no meaning after all.
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
beckzz said:
hey guys,
finally i made it...
thx adobih for your offer, but i'll try to do it in english...think(hope) my english is not that bad
so my problem was the following, slightly different from yours:
i bought a used Galaxy S I9000 for my girlfried as a christmas present cause her Galaxy Ace is the worst Android-phone i ever saw ^^
this "new" Galaxy S has never been rooted before, it never enjoyed a custom ROM - completely stock with 2.2.1 froyo ^^
Here is, what i did to get cm10 stable to work:
1. Updated android to latest official android 2.3.6 with Samsung Kies
2. then i followed the step "Installing the ClockworkMod Recovery" from here
--- ATTENTION: Heimdall 1.3.2 screwed things up (due to a bug i think, only download-mode was available afterwards), use Heimdall 1.3.1 to be safe
3. then i pushed cm 9.1 stable, cm 10.0 stable and latest gapps for 10.0 to the device
4. then i flashed cm 9.1 stable via CWM - an Error occured
5. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
6. device reboots and starts to install CM 9.1 Stable on its own
7. booted to the now "new" CWM installed by cm 9.1 zip
8. flashed cm 9.1 zip again
8. booted cm 9.1 normally, everything was working fine
9. booted into cwm
10. flashed cm 10.0 zip - an error occured
11. then i selected "reboot system" in CWM (NOT "reboot recovery"!!)
12. device reboots and starts to install CM 10.0 Stable on its own
13. booted to the now "new" CWM installed by cm 10.0 zip
14. flashed cm 10.0 zip again
15. a warning occured "incompatible filesystem, flash again to confirm"
16. flashed cm 10.0 zip again
17. booted cm 10.0 normally, everything was working fine
18. booted CWM again, flashed gapps
19. booted cm 10.0 normally, everything was working fine
I was not able to flash cm 10.0 directly after flashing codeworxs kernel with heimdall. think this is related to changed partition sizes and stuff...
device only booted to CWM again, i was not able to boot the system - bootloop. Once i tried to flash cm10, there was no success when trying to flash cm 9 after that.
i tried it 3-4 times to flash cm 10 directly with no success. i checked md5 sums of the downloaded files, but everything was fine.
the detour with cm 9.1 was the only way to get it to work.
after trying to flash cm10 directly it always screwed something and was not able to get any further.
to start again, i had to go back to stock with odin. For that i used these instructions and files. (its in german, but very well illustrated, so all of you should be able to follow the steps).
When starting from stock, you can follow the steps above and everything should be fine.
took me some hours to figure out the correct order of the steps....
this is a slightly different problem as the one in op, so i decided to provide my solution here.
the heimdall 1.3.2-bug occured with the i9000 of a friend of mine, too. only heimdall 1.3.1 did what it was supposed to.
for all people interested: i decided to flash semaphore kernel for better customization options....running pretty well
EDIT: thx to everybody in this thread posting your experiences, all together it pointed me to the solution.. THX!
Grz
Click to expand...
Click to collapse
More or less I think we both had the same problem, because I also used this link wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide and heimdall 1.3.2 for flashing my phone. Just it always finished successfully so I didn't realize it was the root of all problems. I used also then Odin from the youtube video that I posted in a few posts earlier, installed Android 2.3.6 and then installed ROM Manager from Google play, and used the app to flash to ClockworkMod Recovery. After that I installed directly CM10 stable with success, and without CM9 detour.
I wanted to flash custom rom on my galaxy S. I flashed clean rom, then kernel with CWM, but there is a problem. Everytime I try to flash rom it ends with bootloop. I tried cm7, cm10, rootbox, miui 2.4. Every time is the same. It starts installing (only few secodns), then screen becames brighter, then restart and bootloop. I tried different kernels, roms but still same result.
ps. sorry for my english
Hi, here is a great guide to fix bootloops:
http://forum.xda-developers.com/showthread.php?t=1660596
Usually, doing factory reset, wipe cache and wipe dalvik cache before and after intalling the ROM should fix the issue though.
I'm doing all necessary wipes, I can recover from bootloop easly but I want flash custom rom and I can't. Istalling zip lasts few second, not few minutes, there is a problem.
Sorry if this is too basic, but are you using the right ROM for your phone?
of course...
I don't know if I'll be able to help you, but can you please list the exact model of your phone just in case? You can see the different variants here:
http://en.wikipedia.org/wiki/Samsung_Galaxy_S#Variants
It is just GT-I9000. Now I managed to flash CM7.2 but if I want install CM9 or CM10 im getting bootloop and can't enter recovery mode ;o
Sorry, I can't really give you an answer with that information. If you are following the steps in each ROMs thread, you should have no problems patching as far as I know (someone more knowledgeable than me may say otherwise).
Maybe posting the exact steps you are following would help me or others to find out what the issue is.
I'm following right steps. It's not my first phone. I know how it should be but it isn't. Here are my steps:
Flash stock ROM w/ODIN v1.85 - OK
Flash CF-Root w/ODIN v1.85
Wipe Data/Wipe Cache
Phone now rooted OK
Boot to CWM Recovery
Install zip from sdcard
Select update on SDCard (cm-7.1.0 from CM site)
Flash completes in just a few seconds
Phone reboots automatically
Now stuck in boot loop
Remove battery
Go to CWM again and reflash CM7.1 zip
Now i have CM7
Reboot to recovery, facotry reset, wipe cache, wipe dalvik
Flash CM9/CM10, finishes in few sec, reboots, then black screen, can't go to recovery mode ;(((
Flashing stock with odin again...and every time is the same, sometimes when I choose CM10 i see info: "Incompatible Partition Layout" so it may be the reason (something with partition, idk)
My phone has never rebooted like that, so I'm not sure what the problem is. I do know I use ODIN v3.07. I also have CWM 6.0.2.7
Best of luck finding a solution, sorry I could no be of more help.
I think CWM6 would help but I can't find this version for cm7
IGNORE ALL LINKS BELOW, they are for the wrong phone
I don't think it matters what CM you have on your phone, you should be able to upgrade CWM from recovery: Maybe not in i9000...
http://forum.xda-developers.com/showthread.php?t=1843825
Doesn't work in i9000 as far as I can tell: You can also try installing TWRP, which I like better than CWM and have in a different device:
http://forum.xda-developers.com/showthread.php?t=1694617
Finally, and don't take me on this because is just a guess, maybe your bootloader is not working properly? I don't really remember how to do this myself:
You are showing me links to CMW and TWRP for i9001, I have i9000...
You are right, please ignore those links... I do know I patched CWM 6.0.2.7 through ODIN on my phone, so maybe that's the only way. In any case, I'll let you look for the actual links.
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
ragdoll20 said:
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
Click to expand...
Click to collapse
You have the steps right there in the first post. I'll leave some explanations
You need cwm (clockwordmod recovery) first. The easiest way to install it is via rommanager https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en. Use rommanager to flash cwm.
Once cwm is installed. Then proceed.
1. Place cm-10.1-20130416-NIGHTLY-p880.zip and gapps-jb-20130301-signed.zip in to your internal sdcard
- Download cm http://get.cm/get/jenkins/25315/cm-10.1-20130417-NIGHTLY-p880.zip
- Download gapps http://goo.im/gapps/gapps-jb-20130301-signed.zip
- Move the files to your internal sdcard
You need to be in cwm recovery for the next steps. To do this you need to power off your phone, Hold VolUp and Power Button at the same time to power on your phone. Wait till you get to cwm recovery console.
2. BACKUP ALL YOUR DATA with CWM Recovery
- In cwm console select backup. use vol+/vol- to navigate through the menus and use power button to select the option.
3. In CWM Recovery make wipe data/factory reset, wipe cache partition, wipe dalvik cache, format system
- These options can also be found in cwm
4. Flashcm-10.1-20130416-NIGHTLY-p880.zip from sdcard
- Still in cwm. Select Install zip from sdcard -> choose zip from sdcard -> navigate to where you put cm-10.1-20130416-NIGHTLY-p880.zip
5. Gapps-jb-20130301-signed.zip from sdcard
- Still in cwm. Select Install zip from sdcard -> choose zip from sdcard -> gapps-jb-20130301-signed.zip
6. Done
- Reboot
I'm not an expert, but that is how I did it.
ragdoll20 said:
I am currently running V20a EURxx the one that everyone was downloading a while back, via the lg suite hack..
I have installed the all-in-one root tool and "think" i have rooted it but i found it to be very confusing
Cyanogenmod 10.1 (the one that came out yesterday) is what i want. http://forum.xda-developers.com/showthread.php?t=2238040
so.....
What are the steps i have to take? I have rooted and done custom roms in the past but am still kind of a n00b.. Please help a fellow XDA member
Click to expand...
Click to collapse
Actually, the first thing you must do is unlock the bootloader. For now, the only sure versions are EUR-XXX (and to be clear, it's not enough that you installed the Euro-Open FW, your phone must have the software identified as EUR-XXX - for instance, german sim-free phones will be identified as 262-000, even if they install Euro-Open FW, and they don't seem to be unlockable as of yet).
So, check the software version (at system settings -> phone info -> software information -> software version) and, if it's Eur-XXX or something similar, you can unlock the bootloader.
If you're using the all-in-one tool, you just have to follow the instructions on it's thread to unlock the bootloader.
Only then can you install CM with the method akosierwin provided.
Okay i followed the steps and installed clockwork mod via the rom manager...BUT!
If i boot into recovery it says: LG Security,ERROR boot image signature, 5 seconds shut down something something...
Whats that all about? thanks for the fast reply's!
you need to unlock your bootloader first
Yep, unlock your bootloader first.
Here are the steps for that
http://forum.xda-developers.com/showthread.php?t=2224020
Okay i unlocked the bootloader ( when im in the S/W upgrade screen it says unlocked at the top..) i have clockworkmod installed but i cant install anything... All the zips give: assert failed,status 7.. Now im in a bootloop. I can go into clockword mod but thats about it. I have tried other zips than the Nightlys from cyanogen but nothing works. WTF
ragdoll20 said:
Okay i unlocked the bootloader ( when im in the S/W upgrade screen it says unlocked at the top..) i have clockworkmod installed but i cant install anything... All the zips give: assert failed,status 7.. Now im in a bootloop. I can go into clockword mod but thats about it. I have tried other zips than the Nightlys from cyanogen but nothing works. WTF
Click to expand...
Click to collapse
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
ImInMunichBitch said:
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
Click to expand...
Click to collapse
Thanks a bunch! I didnt find that thread, i will try it now!
ImInMunichBitch said:
In the general section there's a thread callled flashable CM 10.1 FIX P880 (or similar).
The status 7 error occurs because of a little line (p880 instead of x3 for device recognition).
Install the CM from there or try to reinstall CWM through ROM Manager (should be latest and working)
And don't forget the GApps (from goo.im or the thread with the fixed CM)
EDIT: Link to the fix http://forum.xda-developers.com/showthread.php?t=2238814
Click to expand...
Click to collapse
IT WORKED!! YOU JUST MADE MY DAY! PM me and i'll give your reward :laugh:
ragdoll20 said:
IT WORKED!! YOU JUST MADE MY DAY! PM me and i'll give your reward :laugh:
Click to expand...
Click to collapse
I'm glad that I helped you, but I really don't want some kind of reward
Just click the thanks button and donate to our developers if you want to give a reward
to the people who deserve it
In the steps for installing CM, there is the advice to do a nandroid backup of the existing system!
Is it possible, after wiping and installing CM 10.1, to restore only data, so I would have all my Apps and Userdata back, or would this cause problems with CM 10.1 settings?
Has someone tried this already?
Is CWM after wiping and installing still present?
Bogeyof said:
In the steps for installing CM, there is the advice to do a nandroid backup of the existing system!
Is it possible, after wiping and installing CM 10.1, to restore only data, so I would have all my Apps and Userdata back, or would this cause problems with CM 10.1 settings?
Has someone tried this already?
Is CWM after wiping and installing still present?
Click to expand...
Click to collapse
CWM ist still installed after CM 10.1 flash.
If you want to have your apps + data back install titanium,
though I don't really know about restoring a backup on CM
(but it's a different android so I think it wouldn't work)
ImInMunichBitch said:
CWM ist still installed after CM 10.1 flash.
If you want to have your apps + data back install titanium,
though I don't really know about restoring a backup on CM
(but it's a different android so I think it wouldn't work)
Click to expand...
Click to collapse
Thanks, but I tried with Titanium Backup on V20a (after wiping and installing V20a over V10h) and not all Apps was correctly restored, settings of system, all the screens of Nova Launcher, the Widgets and their settings and many more was wrong or not restored, so I tried with restoring only "data" from CWM-Backup and it works perfectly...
Anyone tried this on CM 10.1?
Glad that it worked
Didn't know that.
Sent from my LG-P880
Hi all,
I'm still using my Galaxy S on Froyo and don't feel I need to upgrade to a new handset yet but I would like some advice on rooting and getting my phone updated to the latest and greatest F/W (Custom or standard) so that I can get the best out of my phone and give it a new lease of life. Can anyone point me in the right direction? I've already used Odin a while ago to update from Eclair to Froyo so I've had a bit of experience with this apart from rooting and loading custom ROM's Any help or advice would be much appreciated.
th3rmi1t3 said:
Hi all,
I'm still using my Galaxy S on Froyo and don't feel I need to upgrade to a new handset yet but I would like some advice on rooting and getting my phone updated to the latest and greatest F/W (Custom or standard) so that I can get the best out of my phone and give it a new lease of life. Can anyone point me in the right direction? I've already used Odin a while ago to update from Eclair to Froyo so I've had a bit of experience with this apart from rooting and loading custom ROM's Any help or advice would be much appreciated.
Click to expand...
Click to collapse
download 2.3.6 Firmware from this thread
http://forum.xda-developers.com/showthread.php?t=1102881
then download CM 9 from
http://get.cm/?device=galaxysmtd and flash
if you want JB , install any costum rom from development section
The Tox said:
download 2.3.6 Firmware from this thread
http://forum.xda-developers.com/showthread.php?t=1102881
then download CM 9 from
http://get.cm/?device=galaxysmtd and flash
if you want JB , install any costum rom from development section
Click to expand...
Click to collapse
Thanks for that. What is CM9? Will I need to root first?
I've just attempted rooting. Does this result from Odin look normal?
Hey, Tox. Thanks for the advice. Why CM9? There are later versions, is CM9 the most stable? I'd like to try Slim Bean. Do I need to install that CM9 before I attempt to put Slim Bean on? Also, will I need any other files/apps? I've checked that my i9000 is rooted ok by doing an su in a terminal emulator.
Could anybody point me to a straight forward tutorial which could help me from where I'm currently at?
I've now installed clockworkmod recovery and created a backup to the SD card in recovery mode. I'm guessing the next steps should be pretty straight forward. I just need to know which files I have to download. What's the best Slim Bean for me to try and what other apps should I install with it?
Ok, I've screwed up. I installed clockworkmod recovery and created a backup. I tried flashing the latest Slim Bean ROM and addon pak but my phone wouldn't connect to the cell network. I attempted to recover from the backup using CWM but my phone is now stuck in a bootloop with the Samsung splash screen. Can anybody help me please?
th3rmi1t3 said:
Ok, I've screwed up. I installed clockworkmod recovery and created a backup. I tried flashing the latest Slim Bean ROM and addon pak but my phone wouldn't connect to the cell network. I attempted to recover from the backup using CWM but my phone is now stuck in a bootloop with the Samsung splash screen. Can anybody help me please?
Click to expand...
Click to collapse
you lost your IMEI , that's why i told you to flash CM9 first , to avoid loosing IMEI ,
reflash 2.3.6 firmware via odin , root it , flash CM9 , then flash slim bean rom
Thanks. I've just flashed 2.3.6 again and then applied CWM recovery but it still boot loops. Do you know why I couldn't just restore from the backup I'd created?
How can I flash the CM9 pack with Odin? It's a ZIP folder and wont recognise it. Please help.
Is there any other way around this? I've just installed SB again with the addon pack just so that I could get the CM9 onto my SD card. What's the best way to sort this out and get my IMEI number sorted?
Can anyone help me at all?? I have the IMEI number in the back of the phone if that's any use?
th3rmi1t3 said:
Is there any other way around this? I've just installed SB again with the addon pack just so that I could get the CM9 onto my SD card. What's the best way to sort this out and get my IMEI number sorted?
Click to expand...
Click to collapse
this how to install cm 9
Put it ( zip file ) to your phone's internal sd-card
Reboot to recovery (vol up + home + power)
Wipe data/factory reset
Wipe cache
Advanced > wipe dalvik cache
Install zip from sd-card
Choose zip from sd-card
Select cm-9.0.0-galaxysmtd.zip
Confirm
Wait
Go back
Reboot
the same you way you do with a JB rom
and please push thanks button ,
Thanks for the reply T. So should I do a full wipe (Wipe data/factory reset Wipe cache Advanced > wipe dalvik cache) before installing 2.3.6, then apply the CWM update followed by your instructions above? Will that recover my IMEI because, as you said, it's definitely no longer there.
I've just wiped everything and installed GB 2.3.6 and got the following messages. Does this look ok? Also, after I'd done that, I rooted it with CWM then tried installing the latest stable CM10 but now when I reboot, it shows the CM/Samsung screen as if it was booting then it just goes back to the CWM recovery What do I do now??
Success!
I've just powered up my phone again and suddenly the Cyanogen startup screen appeared! I powered down and put the SIM back in from my backup phone and I'm back on the phone network. I was reading up on lots of other complicated ways of recovering the IMEI and this has been really straight forward. I'm liking the Cyanogen 10.1.2 so far so might stick with that. Thanks so much for your help TT!
So to answer a few of your questions, I know I'm late to the party but for future reference
-The reason why Tox recommended flashing CM9 first is because problems can occur going straight from 2.3.6 to Jelly Bean in terms of your IMEI- your device's "identification". If you lose the IMEI, you lose the ability to connect to your network provider. Flashing CM9 and letting it boot as an intermediate step prevents this from happening. Once you've booted CM9 when you flash and you have reception, you're all goods to flash any JB rom from there.
-Your bootloop from recovering the backup that you made from Slim- I'm guessing it was a backup from 2.3.6- has nothing to do with the IMEI. Phones can boot without the IMEI. Its because the data partitions in 2.3.6 are different to those in Jelly Bean. Hence they're incompatible with each other- you tried to restore a different data partition that what was available on Slim Bean (because it was Jelly Bean).
-Flashing any 2.3.6 rom will restore your IMEI. However regarding the photo you took with the red error messages...
-That's because of the reason I mentioned above, with the data partitions. Because they're different, the phone can't recognise them and so can't boot, hence resulting in a bootloop. Easy way to fix this- there's a file called dbsdata.rfs.tar (its somewhere in these forums, right now I can't find a link). If you get that situation again, just pul the battery and reinsert it, go back into download mode, put dbsdata.rfs.tar in PDA, let it flash. That should put the right data partition on the phone.
Hope that these clarified some of your questions!
Sent from my GT-P7510
Thanks for the tips and clarifying all that for me Soryuu. Much appreciated. Now I've learned a little more, I can have a play around with different ROMS with a bit of confidence. :good: Any suggestions on good things to try out? I think I still need to apply some add-on's for this CM10.1.2 build as I don't have market place, google, FB etc.
th3rmi1t3 said:
Thanks for the tips and clarifying all that for me Soryuu. Much appreciated. Now I've learned a little more, I can have a play around with different ROMS with a bit of confidence. :good: Any suggestions on good things to try out? I think I still need to apply some add-on's for this CM10.1.2 build as I don't have market place, google, FB etc.
Click to expand...
Click to collapse
Don't forget your Gapps ;3 (most roms need them to be flashed seperately)
Good things to try out as in?
Sent from my GT-P7510
Hi everybody,
just got an old yet effective SGS and I wanted root and get rid of touchwizz and all the crap from my carrier
I was unable to boot into DL mode, i tried everything, so I had to do it with adb reboot
I never had to use Odin to do my hacking with android so i'm not used to it but short story : I rename my rom.zip into rom rom.tar, it failed and all I have is this now :
https://www.dropbox.com/s/wk42jbmp33a3ftu/IMG_20140715_152917.jpg
Also I need to unsimlock, flashing a new rom will also do the trick right ?
thanks
What you just did is bricking your phone. It it was a zip file you need to install it from the recovery. Renaming it is not the way it works. I'm not sure if now you can fix it. Sorry, man
Sent from my GT-I9000 using XDA Premium 4 mobile app
Do you know what I can at least try?
If you can get into download mode:
Follow sections 2 and 3 in this guide.
If you can't:
Follow this guide and after that do what I sails to do if you have download mode.
Does 3-button-combo not work to get into the download mode?
(power & home & volume down)
tetakpatalked from Nexus 7 flo
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
@Idealith simlock has nothing to do with the firmware.
You need now any root kernel for that firmware, it has to be compatible with the intiframs of your 2.x version and it will give you a custom recovery.
There you can flash first CM10.2 to get the modified partition sizes and KK ready recovery and after that you can flash CM11
IMHO, the new Mackay ICS 2014 rom based on CM9 is a lot faster than any KitKat and works better on the i9000
tetakpatalked from N7100
my question about the rom still applies cause this one is awful
but with what does it have to do then ?
EDIT : my browser didn't render the end of your answer
I'm afraid i'm not following though :/
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Idealith said:
I got my 2.3 rom to stop crashing
and I once boot into recovery mod idk how ..
I selected the 10.2 CM rom but it started rebooting over and over again
I'm really not following everything that is happening over here :/
Click to expand...
Click to collapse
Hey, could you tell me which country you are at? I could then take a few steps to help you
PFFFFFFFFFFFFFFFFTTT, sent from my i9000
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Idealith said:
I am currently in France
last news : been able to reboot into CWM, I selected the mackay cm 9 based rom, it rebooted halfway thrugh only to reboot in TWRP (idk how, are both installed or is twrp in the rom too ???)
so i tried from twrp wiping everything before and it wen through, then on bot it told me it needed to factory reset, it never worker though
so now i can boot into CWM but can't access my sd card ...
thanks
Click to expand...
Click to collapse
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
tetakpatak said:
It was perfectly normal behavior, as after flashing the zip from CM, it will in firat step upgrade your recovery to TWRP 2.2.2.0
As you have wiped already before, it would be perfectly fine to just flash the rom.zip in the new TWRP recovery, and your gapps right afterwards. The recovery upgrade is totally common on the i9000 as first step.
The i9000 can easily be unbricked by flashing a stock image with Odin.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Idealith said:
I suppose my phone has been unbricked I made a 2.3 stock rom work
What i do now :
I flash the stock rom, go back to DL mode, flash the recovery, take the battery off, boot back in recovery, wipe everything ( do I really have to wipe system and all ?), select the ROM, nd once I'm in TWRP i reselect than same ROM
for the cm9 based mackay one it keep rebooting over and over again
for CM 10.2 it says the encryption failed and I need to factory reset, then nothing works
Click to expand...
Click to collapse
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
tetakpatak said:
Yes, that would be correct procedure. To install CM9 you will have to format data, cache and dalvik cache.
If you have never had a JVU or JVZ firmware installed, it is likely that you still have a Froyo bootloader which could be reason of the problems with Android 4.xx
tetakpatalked from N7100
Click to expand...
Click to collapse
and how do i get that bootloader set up ?
Idealith said:
and how do i get that bootloader set up ?
Click to expand...
Click to collapse
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
tetakpatak said:
Either by flashing a whole JVU or JVZ stock firmware, or by flashing a bootloader only.
Check my sticky thread here under the same section (help & troubleshooting), I have described whole the procedure in the OP. I have even attached the files and also video is there: http://forum.xda-developers.com/showthread.php?t=2444308
Right point would be to do it first.
tetakpatalked from N7100
Click to expand...
Click to collapse
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Idealith said:
thanks you so much i have now CM 10.2 running
would you know by any chance how to un simlock it ?
Click to expand...
Click to collapse
Ask your carrier, I assume the phone contract isn't new anymore (or expired) so you'll get unlock code for free. Here in Europe one can obtain the unlock code after 2 years for free.
Otherwise you can ask one of the online unlock services, it costs usually around 15-20$ to get the code
tetakpatalked from N7100
Idealith said:
so i tried the resistance thing but i was unable to find all of the part required so i bought one of these already done solution thingy
It worked, I'm now able to boot into DL mode
I also succesfully install a random 2.x rom from an unknown european carrier, no root, lots of crap installed, and simlocked
How do i get from that to my CM 11 rom ? (this time it's in .tar format via 7zip ^^')
I tried via Odin in PDA it says fail right away
what can I do ?
thanks fr all the answers guys
Click to expand...
Click to collapse
I'm glad that the JIG helped you (I know I'm late )
danielbe said:
I'm glad that the JIG helped you (I know I'm late )
Click to expand...
Click to collapse
yeah that worked like a charm
it was a good idea to buy it, i would have use the resistors so much
is there a more xda way to unlock it ? my carrier wants me to send the phone and have it unlock, they won't just provide the code :/