Database Develop

Incredible S disassembled

Hey guys
So i cracked my touch digitizer and decided to chance it myself.
I have taken some pictures of the phone disassembled.
So if anyone is curoius to see the inside of their phone, here it is...
If there is something you want a closer look of, just tell me and i will take a picture.
I haven't put it back together yet, cause i didn't know you needed some special tape to mount the digitizer...

Pretty neat. I rember taking my Nexus One apart. I got the digitizer and screen together. Didn't want to deal with the tape/glue aspect.
Sent from my HTC Incredible S using XDA Premium App

Great job!
I was in the same shoe as you. Mine was a badly cracked LCD while the touch screen didn't even have a single scratch. Don't ask how I did it
Dismantling the LCD and the touch screen assembly was the toughest part. Seems like all newer and slimmer phones are using glue to fix their parts together. A nightmare for DIY.
I used normal double sided tape to put mine back together. Seems to be holding well so far. However, I am still looking around for better alternatives. Let me know if you find one!
I love my INCS!

could you make close-up pics from the bottom leds that are being used?
im actually thinking of replacing them for blue or orange

Was it hard to do because I have some dust under my screen and maybe give it a try.

How did you manage to crack the gorilla glass??
Sent from my HTC Incredible S using XDA App

Yeah, i'm gonna try to replace my digitizer as well, i'm kinda scared to pull the screen & digitizer apart... I've read that you can heat it up using a hairdryer and that the glue will get loose, but i'm not sure if i have the guts to heat my screen up
So how did you manage to get the screen off?

Don't think it is worth the effort and risk to just get rid of a few dust particles.
Sent from my HTC Incredible S using XDA App

Guys, using a hairdryer f***s the phone up. You don' need lot of time to overheat any metal parts and circuits and stuff break...
You think it isnt that hot, but works the same way like when u are in the sauna and your necklace burns your neck when it hangs apart from your body for a couple of seconds.
Sent from my HTC Incredible S using XDA App

Hawkysoft said:
could you make close-up pics from the bottom leds that are being used?
im actually thinking of replacing them for blue or orange
Click to expand...
Click to collapse
I'm afraid i cant to that. I'm afraid of braking it when removing the tape wich is on it. The button "display" is 0,5 mm thick or so. Im not even sure it is possible to replace them.
Neolight78 said:
Was it hard to do because I have some dust under my screen and maybe give it a try.
Click to expand...
Click to collapse
Dont do it just to remove some dust. Not worth the risk. Its not that easy to take it off.
RicarduZonta said:
How did you manage to crack the gorilla glass??
Click to expand...
Click to collapse
6 feet drop on concrete floor with the corner first. Even Gorilla glas cant survive that
VaalNL said:
So how did you manage to get the screen off?
Click to expand...
Click to collapse
After removing everything on the back i was able to push at the back of the screen in the top of the phone, and then get a little plastick tool in and pulled it of.
Its quite hard to pull off but the glass was already cracked so i just pulled a bit hard.
I was a little bit more carefull with the LCD. Its also quite hard to remove. Just took my chances and hoped the glue would give in before the LCD craced

Cool story bro, I always wanted to know what's inside!

Can you post a high res picture of just the mother board particularly the NAND flash of possible
Sent from my HTC Incredible S using XDA Premium App

I'm also looking for what I need to re attach the digitizer. Any ideas
Sent from my HTC Incredible S using XDA App

What did you use to glue the digitizer back on? I broke mine and waiting for new digitizer and housing to come in. But i have no idea what is used to glue it back on. Also wondering if the digitizer gets glued back onto the lcd or onto the housing or both? Thanks guys!

hosecastro said:
What did you use to glue the digitizer back on? I broke mine and waiting for new digitizer and housing to come in. But i have no idea what is used to glue it back on. Also wondering if the digitizer gets glued back onto the lcd or onto the housing or both? Thanks guys!
Click to expand...
Click to collapse
Hey
I answered in the other thread
Sent from my HTC Incredible S using XDA App

[Q] glass lifting on htc vivid

is there anyway to fix the glass from lifting off the lcd ,it looks like there is some kind of double sided tape or something ,the touch screen is also not functioning properly any help would be greatly appreciated

Unless there's signs of abuse (dropped or water) I'd say it's warranty time.

druffin408 said:
is there anyway to fix the glass from lifting off the lcd ,it looks like there is some kind of double sided tape or something ,the touch screen is also not functioning properly any help would be greatly appreciated
Click to expand...
Click to collapse
If you can snap a pic of the defect I can be of some help. The digitizer / lcd assembly is very delicate, the glass screen is glued with the digitizer but can be correctable if for some reason the glass does come loose. The manufacturing of the housing on the vivid im my honest opinion is very cheap.
youll need to invest in one of these
http://www.sakuraofamerica.com/Pen-Glue
This will allow you to reglue the loose seam on the glass, but will require you to detach the glass completely and clean off any existing residue.
Make sure you buy the blue one, works like a charm for all the fixes ive experienced regarding loosened screens.
PM me if you have any questions

Any possible to share a close picture?

Replacing Spreaker Grills

Ok so I have the silver HTC One and as much as I love it, I can't help but think the front would look bad-ass with the black speaker grills...
I was wondering if anyone has any experience replacing their speaker grills, I remember seeing a drop test video and it popped off. The guy in the video mentioned how it didn't clip back on, it was glued on.
I think if it was easy enough to get a stanley blade in between the grill and the plastic it could just pop off (mine has a gap so it could be quite easy) then it would also help in the future if any scratches happen, just to replace them again...
Thoughts?

thats a good idea, itll be great to know if the speaker grills are repleacable, as they are slightly raised on most phones

I'm just worried incase I order the replacment parts and they are not the same quality as the real HTC One parts. Is there a site that sells genuine parts? They would need to ship to the UK for me though...

Are you out of your mind?
If you are, I'd recommend sandpaper tape and some spray paint. That would probably be easier than disassembly. Maybe even some black nail polish.
Sent from my HTC One using xda premium

couped said:
Are you out of your mind?
If you are, I'd recommend sandpaper tape and some spray paint. That would probably be easier than disassembly. Maybe even some black nail polish.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I dont think it will be as bad as you think, this is the video I was talking about:
http://youtu.be/KwE9PGDnlvs?t=1m51s
I know the top may be more difficult to get off because of the camera and I think I will wait a few more months to see if anyone does drop their One and the top part pops off... But it would be interesting to know because this could be useful to those who get any real bad damage to their speaker grills...

The speaker grills are glued to the housing, Removing them shouldn't be hard
Do it and get us some pics

I'm doing it. Are you sure about the glue? I also started a thread about it a couple of days ago.

robt772000 said:
I'm doing it. Are you sure about the glue? I also started a thread about it a couple of days ago.
Click to expand...
Click to collapse
The bottom one is definitely glued, I am not sure about the top one though

Im interested...
Barca009 said:
Ok so I have the silver HTC One and as much as I love it, I can't help but think the front would look bad-ass with the black speaker grills...
I was wondering if anyone has any experience replacing their speaker grills, I remember seeing a drop test video and it popped off. The guy in the video mentioned how it didn't clip back on, it was glued on.
I think if it was easy enough to get a stanley blade in between the grill and the plastic it could just pop off (mine has a gap so it could be quite easy) then it would also help in the future if any scratches happen, just to replace them again...
Thoughts?
Click to expand...
Click to collapse
I agree that the black would look pretty cool. Let us know how this turns out! and take pictures of the process. I myself am curious whats behind the top grill, my speaker on the top is starting to crackle horribly i want to know if it would be possible to replace.

One of mine (the bottom grill) has a small chip in it that really annoys me, so i have ordered a new set. Postage to the UK is quite expensive, but the total was only £24. Not that bad considering its an original part I guess.
Removing the grills shouldnt be too hard, just heat them up with a hot air gun, being careful not to 'cook' the phone and carefully prise the grill up. The gap most people have in the case may be a help here. The new one should just press on. Warm it up, press it down and hold it firmly until cool, with a clamp or strong bulldog clip if you can.

Etradesupply.com sells almost everything for HTC one just so everyone knows if they didn't, u also have a tiny chip in my lower speaker grill, but my case hides it for now so I'm not super worried, but I would love to know if this is possible!!
Sent from my HTC One using xda premium

The grills and the SIM tray are about the only things you can replace. They sell screens, but there is no realistic way to replace them. Even if you could open the phone without marking it, putting it back together is almost impossible.

rovex said:
One of mine (the bottom grill) has a small chip in it that really annoys me, so i have ordered a new set. Postage to the UK is quite expensive, but the total was only £24. Not that bad considering its an original part I guess.
Removing the grills shouldnt be too hard, just heat them up with a hot air gun, being careful not to 'cook' the phone and carefully prise the grill up. The gap most people have in the case may be a help here. The new one should just press on. Warm it up, press it down and hold it firmly until cool, with a clamp or strong bulldog clip if you can.
Click to expand...
Click to collapse
Just for clarification, did you order this from etrade supply? do you have it yet and how is the quality...?
Regards
Zak

Etradesupply quality is very good. I order parts from them and never have an issue.
Heat gun or hair dryer to loosen up the glue should help.
Sent from my HTC One using xda app-developers app

Curious to see if you went through with this.
Sent from my HTC One using xda premium

I bought some etrade silver speaker grills but no longer need them.

If possible please share the whole process heating , removing and fixing the top and bottom speaker grill. Thanks !
Sent from my HTC One using xda app-developers app

Just a tip, do not "paint" the grill. It's impossible to do without stuffing up the holes anyway.. And paint does not stick to aluminium.
You need to anodise aluminium.
Google how to do it but in a nutshell..
1) chemically clean existing aluminium to remove all traces of colour /surface protection. 2)Anodise it to required colour or clear colour
This not only gives you the look you want but makes the surface very hard.
Anodising also is not "on" the surface but part of it so it won't scratch off, block holes etc.
Bare aluminium is very soft and WILL oxidise and go dull. Apart from living in a vacuum or learning to breathe argon gas, you can't stop it.
Anodising MAKES aluminium oxidise and then fill the surface with a dye. This prevents further oxidisation.
Cheers, Marty
Sent from my HTC One using Tapatalk 4 Beta

any luck with replacing the speaker grills?

Just a heads up
I asked about this a different thread and one of the people that replied told me that only the bottom grill is glued in. He said the top is actually screwed in from the back before the back cover is put on. I cant confirm if he was correct, but still good info for anyone planning to try something like this. Can anyone confirm that has purchased these if there are threads in the top grill for it to be screw in?

craked my screen :'(

hey everyone the unfortunate has happened to me, my screen has shattered all across the top, i know how to repair it with the hair dryer and heating the glue and peeling the glass off the digitiser but i have a problem that i have shattered it and it would come off in tiny fragments and i will probably end up scratching the digitiser or even breaking the touchscreen, i have to ask if anyone could tell me how difficult it would be to replace it as i cannot afford to pay £110-£150 to get it fixed by samsung or anyone else
i have attached a photo of my phones screen, im pretty confident on doing it as i get the part in a day :fingers-crossed:
thanks to all who respond

anyone?

Maybe buying a New display is cheaper and possible? :/
Sent from my GT-I8190 using xda app-developers app

Cracked Glass nexus 6

I have a issue, my glass is cracked middle ways of the screen just 1 crack that runs all the way across. The digitizer is not hurt, I have a new glass only kit. It came with just the glass and some UV glue. I don't have insurance on my phone and even if I did it would still cost me 175 to get another device. I think the insurance is pointless because it costs about the same I think if you send it directly to Motorola. The digitizer and glass on eBay is around 175 but it comes with the glass/frame/digitizer. I know that its very hard to change just the screen from what iv been reading. What would you guys recommend I do? I'm trying to avoid spending a lot of money. But if I have to I will. I would like to change just the glass because I ordered that thinking that I could just do it myself, then I got to researching...I have changed the back battery cover and bezzle from midnight blue to cloud white, so I'm familiar with taking it apart. Any advice would be helpful. Thanks!!
Sent from my Nexus 6 using Tapatalk

Just the glass?
You mean the digitizer?
Does it have the AMOLED? Or is it literally just the digitizer?
If it is just the digitizer without the amoled, then you're screwed. It is *impossible* to split the amoled from the digitizer without destroying the amoled.
If it is the digitizer PLUS the amoled, then you can go ahead and smash SMASH SMASH!!!
The amoled+digitizer is glued onto the plastic frame, so you'll want something like a razor blade to carefully break the connection between them without damaging the plastic frame. Once they're separated, you clean up the surface, and just glue them back together.
The metal cover that you see over the existing amoled on the back of the screen+frame unit just pops off.

doitright said:
Just the glass?
You mean the digitizer?
Does it have the AMOLED? Or is it literally just the digitizer?
If it is just the digitizer without the amoled, then you're screwed. It is *impossible* to split the amoled from the digitizer without destroying the amoled.
If it is the digitizer PLUS the amoled, then you can go ahead and smash SMASH SMASH!!!
The amoled+digitizer is glued onto the plastic frame, so you'll want something like a razor blade to carefully break the connection between them without damaging the plastic frame. Once they're separated, you clean up the surface, and just glue them back together.
The metal cover that you see over the existing amoled on the back of the screen+frame unit just pops off.
Click to expand...
Click to collapse
No its the glass only..
Sent from my Nexus 6 using Tapatalk

The digitizer isn't hurt at all the glass is just cracked. I have a new glass with the glue that goes in between the glass and digitizer. Will I need any adhesive for the mid frame?
Sent from my Nexus 6 using Tapatalk

I'm about to attempt to do this myself but I'm afraid that I'll screw something up..
Sent from my Nexus 6 using Tapatalk

Its the amolded corning gorilla glass
Sent from my Nexus 6 using Tapatalk

Hope it works out. Had the same problem with my S4 a few years ago. I had my buddy do it for me. Was a lot of work but worth it. Maybe there is a tutorial on YT?

I was in the same boat. I decided to have it professionally fixed. I usually fix all my phones, but the price of the glass with everything attached was just as expensive as having a professional fix it. with a warranty.
The part i found was on average between 150 and 180. it only cost me 200 to get the phone fixed by someone.
What ever you choose good luck.

qnc said:
I was in the same boat. I decided to have it professionally fixed. I usually fix all my phones, but the price of the glass with everything attached was just as expensive as having a professional fix it. with a warranty.
The part i found was on average between 150 and 180. it only cost me 200 to get the phone fixed by someone.
What ever you choose good luck.
Click to expand...
Click to collapse
I only have 185 in my phone,lol that's what sucks..I'm trying to avoid spending a lot of money...but I might have to spend more than I want. If I can do it myself then I will try. I really don't have anything to lose.
Sent from my Nexus 6 using Tapatalk

Benzema9 said:
Hope it works out. Had the same problem with my S4 a few years ago. I had my buddy do it for me. Was a lot of work but worth it. Maybe there is a tutorial on YT?
Click to expand...
Click to collapse
Thanks brother
Sent from my Nexus 6 using Tapatalk

It's not easy but it can be done. The LCD is very fragile and it takes a lot of time and patience to remove the old glue. I have a screen separator machine that heats up the glass and makes it easier to separate but it is still a lot of work and very easy to destroy the LCD. I've heard of people doing it with a heat gun but that is risky because you can't regulate the temp and can kill the LCD. Make sure to invest in some plastic razors if you attempt it. Also you will need a UV light to cure the glue as it will only harden under UV.

Benzema9 said:
Hope it works out. Had the same problem with my S4 a few years ago. I had my buddy do it for me. Was a lot of work but worth it. Maybe there is a tutorial on YT?
Click to expand...
Click to collapse
There is 1 good tutorial but there is no speaking in the video, just some lame ass music. The guy in the video also uses a hot plate a thin piece of some kinda wire. There needs to be a better video on how to replace just the glass screen on a nexus 6, a detailed video with speaking..
Sent from my Nexus 6 using Tapatalk

doitright said:
Just the glass?
You mean the digitizer?
Does it have the AMOLED? Or is it literally just the digitizer?
If it is just the digitizer without the amoled, then you're screwed. It is *impossible* to split the amoled from the digitizer without destroying the amoled.
If it is the digitizer PLUS the amoled, then you can go ahead and smash SMASH SMASH!!!
The amoled+digitizer is glued onto the plastic frame, so you'll want something like a razor blade to carefully break the connection between them without damaging the plastic frame. Once they're separated, you clean up the surface, and just glue them back together.
The metal cover that you see over the existing amoled on the back of the screen+frame unit just pops off.
Click to expand...
Click to collapse
Have you ever changed just a broken glass screen on a nexus 6?
Sent from my Nexus 6 using Tapatalk

travmed said:
It's not easy but it can be done. The LCD is very fragile and it takes a lot of time and patience to remove the old glue. I have a screen separator machine that heats up the glass and makes it easier to separate but it is still a lot of work and very easy to destroy the LCD. I've heard of people doing it with a heat gun but that is risky because you can't regulate the temp and can kill the LCD. Make sure to invest in some plastic razors if you attempt it. Also you will need a UV light to cure the glue as it will only harden under UV.
Click to expand...
Click to collapse
Thank you, for you're advice brother! I took my device apart awhile ago all the way down to the mother board. I came to realize that I'm just gonna have to wait and hope I can scrape up some money and hopefully get lucky and find someone that has a used nexus 6 for cheap if I'm gonna spend 150 to 175 bucks on just a LCD frame assembly, hell I might as well just buy another nexus 6. And if i let Motorola replace my phone its still gonna be 175 bucks and all of them will probably be refurbs! I have 185$ in this one. I bought it off swappa haven't even had this damn thing a month yet lol. When I bought the phone it still had a warranty on it, the warranty ran out about a week before I broke it lol. Jus my luck.
P.S. I would gladly accept donations J/K..
Sent from my Nexus 6 using Tapatalk

travmed said:
It's not easy but it can be done. The LCD is very fragile and it takes a lot of time and patience to remove the old glue. I have a screen separator machine that heats up the glass and makes it easier to separate but it is still a lot of work and very easy to destroy the LCD. I've heard of people doing it with a heat gun but that is risky because you can't regulate the temp and can kill the LCD. Make sure to invest in some plastic razors if you attempt it. Also you will need a UV light to cure the glue as it will only harden under UV.
Click to expand...
Click to collapse
Nexus 6 does not have an LCD. It has an AMOLED.
AMOLED is less than 1mm thick. It CANNOT be removed from the glass digitizer without destroying it.

doitright said:
Nexus 6 does not have an LCD. It has an AMOLED.
AMOLED is less than 1mm thick. It CANNOT be removed from the glass digitizer without destroying it.
Click to expand...
Click to collapse
I watched a video on youtube, of a guy that actually done it without destroying the digitizer.
Sent from my Nexus 6 using Tapatalk

doitright said:
Nexus 6 does not have an LCD. It has an AMOLED.
AMOLED is less than 1mm thick. It CANNOT be removed from the glass digitizer without destroying it.
Click to expand...
Click to collapse
I'm not saying that its easy, and I'm not saying that it can't be done successfully either. But I do know this on a scale of 1 being the easiest and 10 being almost impossible. I would rank it a 9.7. So I'm going to just go and buy the digitizer + glass + frame and do it my self.
Sent from my Nexus 6 using Tapatalk

mwebb34 said:
I'm not saying that its easy, and I'm not saying that it can't be done successfully either. But I do know this on a scale of 1 being the easiest and 10 being almost impossible. I would rank it a 9.7. So I'm going to just go and buy the digitizer + glass + frame and do it my self.
Click to expand...
Click to collapse
It might be possible, IF the whole thing wasn't glued down to the frame, which it is.

doitright said:
It might be possible, IF the whole thing wasn't glued down to the frame, which it is.
Click to expand...
Click to collapse
The video I watched doesn't have any speaking in it its just has some lame music in the background. I will tryn link it to you so you can watch it.
Sent from my Nexus 6 using Tapatalk

I tried exactly the same you were about to do but ended up destroying the LCD when I tried separating the LCD from the plastic frame. I had no choice but bought the LCD (with the glass already glued) but still it wasn't easy to attach the LCD back to the bent frame.
Obviously you know what to do because you have disassembled the N6 before, but be careful when you separate the LCD-broken glass from the frame. There just isn't much leverage.