[Help] CWM won't launch - Sony Xperia T, TL, TX, V

I followed the instructions to root my 195 LT30a with locked bootloader
Everything went fine. Downgraded to 303, installed CWM, then flashed a rooted 195 tft, as well as flashed the 195 kernel, as per instructions.
Now I'm trying to flash the reboot fix, but CWM won't launch. I've tried repeatedly pressing every button (and button combination) when the Sony logo pops up, but nothing seems to work. I tried to reinstall CWM, but now it reboots itself when the installer tries to remount ro /system and the install fails.
What am I doing wrong?

You need to flash the cmw .zip immediately after flashing the Rom and before you reboot otherwise you lose cmw
Downgrade again and repeat the process
Sent from my star trek communicator
Sony Flagship device circa 2145

You can also install CWM directly from jb! Just flash jellybean, root using bin4ry's root v21, and flash the CWM from this post
http://forum.xda-developers.com/showthread.php?p=34607959
[CWM][LB][STOCK] ClockWorkMod 6.0.1.2 for Xperia T/TL/TX/V v4
Just make sure u choose the correct version.
(i also recommend the ICS CWM from this post, never had any trouble with it, but be sure to not forget to flash reboot fix!)
Sent from my phone using XDA Premium

I have tried this several times. The only way I can get into CWM is by using Flashtool. This works but that means I have to be at my computer to get into CWM. I am currently using the AT&T stock jelly bean ROM which is rooted.

cjna said:
I have tried this several times. The only way I can get into CWM is by using Flashtool. This works but that means I have to be at my computer to get into CWM. I am currently using the AT&T stock jelly bean ROM which is rooted.
Click to expand...
Click to collapse
If you can get into recovery via flashtool then its installed correctly.
What exactly are you trying with the volume keys when you try to boot up

gregbradley said:
If you can get into recovery via flashtool then its installed correctly.
What exactly are you trying with the volume keys when you try to boot up
Click to expand...
Click to collapse
I have tried both holding the volume-up key when the SONY shows and the volume-down key (at separate times).

Don't hold it, keep pressing it and letting it go and pressing it again
Sent from my star trek communicator
Sony Flagship device circa 2145

That works. Thanks.

well, you can try to tap on the screen too, it works on V

It works on the Ion too, but not on the TL. Actually I found out I was holding the volume-up key instead of tapping it. It works now.

Change title to solved.
Sent from my LT30p using xda app-developers app

scythekain said:
Change title to solved.
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
My problem is solved, but I didn't start this thread. I don't think Lebult's problem is solved.

Related

[LT30p] [SOLVED] Boot loop after downgrading with flashtool

Unsatisfied by the JB update of my xperia T, I downloaded flashtool and the ftf file to revert to ICS.
Procedure apparently went good, but at the restart the phone is looping on boot: I see 'sony', then 'xperia', then the animation starts but after a little it restarts again and again.
Probably my fault was to leave the 'wipe data' option unchecked.
How can I fix? I can't unplug the battery so I'm not able to go to flash mode and try again...
froma72 said:
Probably my fault was to leave the 'wipe data' option unchecked.
Click to expand...
Click to collapse
Flash it again and wipe everything
How can I fix? I can't unplug the battery so I'm not able to go to flash mode and try again...
Click to expand...
Click to collapse
Press and hold the volume up and power button together
After 10 seconds it will vibrate.
Keep holding it untill it vibrates another 3 times.
Then enter flashmode and flash it properly this time
Re: [LT30p] Boot loop after downgrading with flashtool
As Greg said that's probably the only option you have mate.
Sent from my LT30p using xda premium
R: [LT30p] Boot loop after downgrading with flashtool
Ok I'm trying....
It's off, thanks a lot.
Inviato dal mio GT-I9001 con Tapatalk 2
froma72 said:
It's off, thanks a lot.
Click to expand...
Click to collapse
And now it works again with ICS 4.0.4.
Thanks again!
No need to say thanks. If you ever feel the need to express your gratitude just hit the persons thanks button, thats what it is for and means us RC's dont have to read extra posts.
But glad to hear its all fixed for you
Even my Xperia T is in booloop.... I flashed many times, many kernels but none are working. It shows Sony logo (not even showing
xperia). It stays the same in every rom. The phone was purchased from UK... Any help would be appreciated...
varundave said:
Even my Xperia T is in booloop.... I flashed many times, many kernels but none are working. It shows Sony logo (not even showing
xperia). It stays the same in every rom. The phone was purchased from UK... Any help would be appreciated...
Click to expand...
Click to collapse
If you have not unlocked the bootloader then just repair the phone using pccompanion.
What exactly have you flashed? Have you rooted? have you unlocked the bootloader?
gregbradley said:
If you have not unlocked the bootloader then just repair the phone using pccompanion.
What exactly have you flashed? Have you rooted? have you unlocked the bootloader?
Click to expand...
Click to collapse
After the phone went into boot loop, i unlocked the bootloader. then i tried SE tool Emma to downgrade to ICS, tried your kernel as well as more 2-3 kernels in combinations but nothing worked. I used flash tool and flashed several ICS and JB ftfs custom as well as modded but none worked yet.... It's still the same, reboots after the logo... In older ICS, it reboots after Xperia screen while in other FW, it reboots just after the sony logo...
Is this enough information to figure out the problem? What is the right comibnation of kernel and FW to start this phone ? It was purchased in UK and came with ICS....It was upgraded to JB without any problem and one day it just went into boot loop surprisingly....
Thank you for your time...
Search for the relock bootloader ftf in the dev section.
Flash that in flashtool (not emma)
Then run the repair software un pccompanion
Sent from my X10i using xda app-developers app
gregbradley said:
Search for the relock bootloader ftf in the dev section.
Flash that in flashtool (not emma)
Then run the repair software un pccompanion
Sent from my X10i using xda app-developers app
Click to expand...
Click to collapse
Did as you said. Flashed the relocked bootloader through flashtool (not emma)... Used the PC companion and did a "recover" procedure...At the end it said "Xperia T was updated with 9.1.A.1.140"
The problem is still the same. It restarts after the sony logo....
What is the next procedure to try ?
Thanks for the help...
varundave said:
Did as you said. Flashed the relocked bootloader through flashtool (not emma)... Used the PC companion and did a "recover" procedure...At the end it said "Xperia T was updated with 9.1.A.1.140"
The problem is still the same. It restarts after the sony logo....
What is the next procedure to try ?
Thanks for the help...
Click to expand...
Click to collapse
That's is not good. After a pccompanion repair everything should be fine.
what was the last thing you flashed before the problem started?
gregbradley said:
That's is not good. After a pccompanion repair everything should be fine.
what was the last thing you flashed before the problem started?
Click to expand...
Click to collapse
Flashed nothing... Before the problem....the phone was updated to JB..It worked for 2 months and then suddenly one day, it freezes, when restarted ,it went into boot loop. That's what bugging me. The flash mode works fine, the quickboot works fine..i can flash any files without any problem, but with any rom or default FW, it restarts after the logo, so i wanna know the possibilities of the problem...
Is there any way with which i can fully format the internal drive and then flash the FW ? Is there a possibly of corrupt internal drive ?
I have had the same Problem, even with repair function of PCC. Only thing working for me was flashing original JB tft with flash tool. After that it bootet up normaly and everything was working again. (Bootloop stayed with ics tft, only jb tft worked)
I flashed jb tft->bootloader relock->jb tft

I bricked my XZ :(

Please help guys. I tried flashing ROM using the instructions on the front page for locked bootloader and my phone froze on formatting /system, I restarted phone and it is just stuck on Sony. I have tried holding power and volume up it does nothing except restart the device. My PC won't recognise it to do any repairs. Any ideas?
Keep pressing vol up + power for 15 sec till the phone shutdown.
Use flashtool to flash a stock ftf firmware.
Sent from my C6602 using xda premium
It just ends up vibrating for three times and restarting back to Sony screen?
Weird this should turn off the phone.
Is the phone plugged to a usb?
Sent from my C6602 using xda premium
Ok thanks I have it turned off now. How do I flash with it off with flashtools?
Download flashtool from development section,and an ftf stock firmware.
Put the ftf file in flashtool/firmware folder.
Install xperia z drivers,you find it in flashtool/drivers
Click on flash,choose the ftf and wait the the pop up telling you to connect your phone by holding volume down and connecting the usb.
Sent from my C6602 using xda premium
Thanks so much mate... Big thanks
gm007 said:
Download flashtool from development section,and an ftf stock firmware.
Put the ftf file in flashtool/firmware folder.
Install xperia z drivers,you find it in flashtool/drivers
Click on flash,choose the ftf and wait the the pop up telling you to connect your phone by holding volume down and connecting the usb.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
Is there a way in this situation to boot into CWM recovery mode, because I have same problem but I have a backup
p.s. while I booting the phone, the LED didn't light up
mannok said:
Is there a way in this situation to boot into CWM recovery mode, because I have same problem but I have a backup
p.s. while I booting the phone, the LED didn't light up
Click to expand...
Click to collapse
I don't know if there is an easier way cause i didn't tried the recovery available.
All you can do is doing all steps again and install the recovery than restore your backup.
Sent from my C6602 using xda premium
gm007 said:
I don't know if there is an easier way cause i didn't tried the recovery available.
All you can do is doing all steps again and install the recovery than restore your backup.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
thanks... btw i didnt unlock the bootloader yet, if i use the flashtools to flash back to the stock rom, will i break the warranty?
mannok said:
thanks... btw i didnt unlock the bootloader yet, if i use the flashtools to flash back to the stock rom, will i break the warranty?
Click to expand...
Click to collapse
No
Sent from my C6602 using xda premium
i may have bricked mine too
gm007 said:
No
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
ok so i was stupidly messing around with my fastboot cwm interface menu`s
and i decided ,somehow that it was a good idea to try and install the jellybean 4.2.2
firmware on my device so i entered the install from sdcard menu without even thinking much about it i located the .zip file and installed it and clicked reboot and then absolutley nothing but the boot vibration went off and the screen stays black and it is stuck here . so i used to old powr+ vol up for 3-15 secs and waited for the double vibration and still nothing happens .so im stuck.
sorry for the long post but i`m in a panic as this phone is fairly new about 1 month old and i had already rooted and unlocked boot loader on it so .i hope the info helps you to help me
please respond asap :fingers-crossed:
rix0400 said:
ok so i was stupidly messing around with my fastboot cwm interface menu`s
and i decided ,somehow that it was a good idea to try and install the jellybean 4.2.2
firmware on my device so i entered the install from sdcard menu without even thinking much about it i located the .zip file and installed it and clicked reboot and then absolutley nothing but the boot vibration went off and the screen stays black and it is stuck here . so i used to old powr+ vol up for 3-15 secs and waited for the double vibration and still nothing happens .so im stuck.
sorry for the long post but i`m in a panic as this phone is fairly new about 1 month old and i had already rooted and unlocked boot loader on it so .i hope the info helps you to help me
please respond asap :fingers-crossed:
Click to expand...
Click to collapse
Did you have enough battery before flashing?
Did you tried flashtool?
Sent from my C6603 using xda premium
rix0400 said:
ok so i was stupidly messing around with my fastboot cwm interface menu`s
and i decided ,somehow that it was a good idea to try and install the jellybean 4.2.2
firmware on my device so i entered the install from sdcard menu without even thinking much about it i located the .zip file and installed it and clicked reboot and then absolutley nothing but the boot vibration went off and the screen stays black and it is stuck here . so i used to old powr+ vol up for 3-15 secs and waited for the double vibration and still nothing happens .so im stuck.
sorry for the long post but i`m in a panic as this phone is fairly new about 1 month old and i had already rooted and unlocked boot loader on it so .i hope the info helps you to help me
please respond asap :fingers-crossed:
Click to expand...
Click to collapse
Sounds to me like you haven't flashed the kernel required for 4.2.2 (I am presuming you were on a stock/custom Sony ROM before)
If you flash 4.2.2 you also need to flash the kernel specific to the ROM you've tried to flash using fastboot commands.
To do that you need to have the correct XZ drivers installed, and have adb/fastboot working
gm007 said:
Did you have enough battery before flashing?
Did you tried flashtool?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
yes i did have enough BATT and no i have not used any flashtool yet as im not sure which to use and i did have a custom romor kernel it was a doomlord one but i just did not take the correct steps and so i was wondering how to undo this ?or just start again (factory reset)
---------- Post added at 08:00 PM ---------- Previous post was at 07:54 PM ----------
rix0400 said:
yes i did have enough BATT and no i have not used any flashtool yet as im not sure which to use and i did have a custom romor kernel it was a doomlord one but i just did not take the correct steps and so i was wondering how to undo this ?or just start again (factory reset)
Click to expand...
Click to collapse
also the phone just does not boot at all i can hardboot as much as i like the screen stays blank and the notification led dont do anything it only shows the red led wen i plug in the usb to indicate charging.
Use flashtool and flash a stock ftf firmware.
Read this could help http://forum.xda-developers.com/showthread.php?t=2229250
Sent from my C6603 using xda premium
gm007 said:
Use flashtool and flash a stock ftf firmware.
Read this could help http://forum.xda-developers.com/showthread.php?t=2229250
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
thanks i will try it and update you after but i think it will work ,thanks alot:good: for the help

My Xperia Z can't boot!

I need some helps plz.
my Z had bootloader unlocked and I had flash DooMkernel and on the EXCELSUS Z v2.5.1 rom.
At the first, everything work perfect till yesterday I turn off my phone.
Then it didn't boot anymore.
Here is my situation:
1. When I press power button, it had a vibration and nothing on screen.
2. I long press the button and it gave me regular vibrations and also nothing on the screen.
3. When I try to charge it, it had red LED on and off all the night.
4. It can still go into flashmood and fastboot.
5. I try to use flashtool to flash .434 ftf. Flashtool told me "ERR_SEVERITY="MINOR";ERR_CODE="0026";ERR_DYNAMIC="Write TA failed"
6. I try to use sony update service to fix it and it told me your device doesn't have new update.
7. I try to use fastboot to reflash kernel and failed as well.
Any idea? Someone plz help me!
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
gm007 said:
http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I have try it. And when It going to flash then appear a line in red "ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0026";ERR_DYNAMIC= "Write TA failed"
jason57 said:
I have try it. And when It going to flash then appear a line in red "ERROR - ERR_SEVERITY="MINOR";ERR_CODE="0026";ERR_DYNAMIC= "Write TA failed"
Click to expand...
Click to collapse
Are you sure you followed the instructions carefully?
Do you have flashtool beta6?
Sent from my C6603 using xda premium
gm007 said:
Are you sure you followed the instructions carefully?
Do you have flashtool beta6?
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
I follow it and do again.
But it still failed
Sent from my Xperia X10 using xda app-developers app
Did you tried.flashtool beta4? Or another firmware?
Move your issue to flashtool' thread.
Sent from my C6603 using xda premium
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
jason57 said:
I follow it and do again.
But it still failed
Click to expand...
Click to collapse
Try this, when you start flashing, press-release the power button multiple times until it finish flashing, this is something that is actually happening on my xperia z, and sometimes it just starts redlight and vibrate 3 times, reboot, if i press-release press-release fast multiple times, it just dont reboot.
Regards!
It works
vodanhdaisu said:
Please help. I've just flash DoomLord v13 kernel via CWM: after install the zip file, I choose Reboot to system but my phone does not boot afterward
I push power button, the phone vibrates but does not awake
I connect my phone to usb, the red light blinks only
Please help If anybody has experienced
Thank you in advance
Click to expand...
Click to collapse
First of all, Flash Kernel only if have unlocked bootloader :/ i encountered the same issue. If so you need to flash the stock ROM - Please find the stock ROM below in link below.
http://forum.xda-developers.com/showpost.php?p=38637922&postcount=2
Use Beta6 Flashtool to flash the ROM.
It will worl for sure

[Q] Help flashed tilal6991's CM 10.2 [4.3] [XPERIA T] cant go back to cm 10.1

Hello everyone
I am a noob.
I have just recently flashed tilal6991's CM 10.2 [4.3] [XPERIA T] rom onto my Xperia T. I know it is a working progress and it works really fast on my phone.
I had decided that after trying it out I would wait till a nightly came out for it. Only thing is I can no longer access CWM by starting up phone and repeatedly pressing down volume. it justs keep screen flickering on a blank screen until I hold up volume and power button to reboot phone.
Can someone please tell me an idiot proof process of reinstalling cm 10.1 onto the phone?
I used CWM to install teh rom.
Many thanks in advance
Just flash a stock ftf using flashtool.
Our flash a stock kernel (doomkernel is good) then flash a stock based custom Rom in recovery (I suggest mine Rom-assaye)
You cannot repair in pccompanion because you have unlocked your bootloader
Sent from my LT30p using xda premium
gregbradley said:
Just flash a stock ftf using flashtool.
Our flash a stock kernel (doomkernel is good) then flash a stock based custom Rom in recovery (I suggest mine Rom-assaye)
You cannot repair in pccompanion because you have unlocked your bootloader
Sent from my LT30p using xda premium
Click to expand...
Click to collapse
Thanks for the quick reply. downloading flash tool now. I will give your rom a go.
Do I need to download the ftf from flashtools website? I noticed they have 9.1.A.1.140 Customized CE1 firmware.
No, just one from the all in one thread, but that one seems fine.
Make sure you use the flash tool from the first post in the dev section
Sent from my LT30p using xda premium
you dont need to flash stock FTF
just flash this kernel via flashtool
http://goo.im/devs/tilal6991/kernels/mint/boot-cm-10.1-test-28072013-take2.img
and you will be able to enter recovery and then flash what you need... this way is more quicker..
Apologies, I misread the op, I thought he wanted to go back to stock.
Yes, flashing a kernel (doomkernel will do) with recovery then the . Zip for cm10 will do the trick much quicker.
Edit
Or flash the kernel then restore the backup of your cm10 Rom that you made before flashing a new Rom
Sent from my LT30p using xda premium
thanks for all the help guys.
I have a new problem. the phone will not stay in fast boot mode and fast tool just keeps saying awaiting device. i dont know what to do. I hold down power and volume up buttons when putting the micro usb in. I get the 3 vibration in a row and then i let go of buttons. blue light comes on for a few seconds and then goes off.
Any ideas?
open flashtool and select flash icon then fastboot mode
turn off your phone hold power +volume down till you get 3 vibrations on a row
now connect the phone by holding only up volume when connecting cable
then select SELECT kernel to flash switch to IMG extension and select kernel after 5 second it should be flashed
now turn on your phone go to recovery and flash what you want
Guys you are all awesome.
finally got it sorted. took me til 2230 GMT. It was the cursed Windows 8. it was not letting me install sony fastboot drivers. once i switched off the function to stop me installing my own drivers, I was able to install fastboot drivers and 30 secs later I was in CWM.
Once again guys you are awesome.

I think I need some help.

Sorry if this isn't the right way of asking this.
I was on .205 firmware I've rooted it using toowelroot way and installed a recovery. Then I tried to install CM11 nightly from today.
I turned on the phone on recovery.
Made a backup.
Install from zip
got a message os "installation complete press any key"
rebooted.
phone never turned itself on
Tried to turned it on but it only vibrates.
Did I brick my phone?
help please.
---------------------------------------------
Did a bit of search. I'm using SUS to fix the problem. I guess custom ROM's aren't for me.
What I'm doing:
*Started SUS
*Connected phone while holding Volume - to the PC
Now I'm waiting for SUS to "fix" my mistake.
feromgar said:
Sorry if this isn't the right way of asking this.
I was on .205 firmware I've rooted it using toowelroot way and installed a recovery. Then I tried to install CM11 nightly from today.
I turned on the phone on recovery.
Made a backup.
Install from zip
got a message os "installation complete press any key"
rebooted.
phone never turned itself on
Tried to turned it on but it only vibrates.
Did I brick my phone?
help please.
---------------------------------------------
Did a bit of search. I'm using SUS to fix the problem. I guess custom ROM's aren't for me.
What I'm doing:
*Started SUS
*Connected phone while holding Volume - to the PC
Now I'm waiting for SUS to "fix" my mistake.
Click to expand...
Click to collapse
You didn't unlock the bootloader
Sent from my C5303 using XDA Free mobile app
Unlock your bootloader first and install cm 11 official
Sent from me
noahvt said:
You didn't unlock the bootloader
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
That's right. I've fixed the issue and my phone is working again. I didn't realize that a unlocked bootloader was necessary.
Sent from my C5306 using XDA Free mobile app

Categories

Resources