In call volume on Cyanogenmod 10. Changing the DSP equalizer settings by raising the 3 "high" side sliders to almost max helps a bit.
interesting, my DSP manager has never seemed to do anything to any output.
Related
Dear all,
I run the stock firmware and like to listen to light music at low volume using a headset. However, the lowest volume is quite high.
Is there some way to decrease it even further without muting it?
Best,
Hindman
As a workaround when using VLC, one can use the built-in equilizer of VLC to decrease the volume.
Unfortunately, the system's equilizer does not provide such good result.
The volume on the output is actually lower than on the Xperia S I replaced with the Z3C. You might not have adjusted the correct volume setting - check Under Settings -> Sound -> Volumes -> Music, video, games & other media.
Toggling the rocker buttons on the sides actually changes the main volume control. Changing the specific media volume setting should resolve the issue for you unless you are using an external amplifier with very high gain.
Dreamslacker said:
The volume on the output is actually lower than on the Xperia S I replaced with the Z3C. You might not have adjusted the correct volume setting - check Under Settings -> Sound -> Volumes -> Music, video, games & other media.
Toggling the rocker buttons on the sides actually changes the main volume control. Changing the specific media volume setting should resolve the issue for you unless you are using an external amplifier with very high gain.
Click to expand...
Click to collapse
I should clarify, that I'm using the noise cancelling headset.
Unfortunately, using the volume slider you mentioned does not allow to decrease the volume further.
Is there a way to lower the volume by about 1/2 of the lowest volume setting? The ringer is quite loud (which is actually good for other reasons), but the lowest setting for the ringer is also quite loud in an office setting.
I know I could put it on vibrate, but I do like to hear it as well - just not as loud. Is there any way to reduce the volume a bit more at the lowest setting?
Thanks in advance for any tips/hints etc.
Are you rooted?
Not rooted, but could be.
Im using a combo approach with dolby atmos (dap_r6.5.zip)
http://forum.xda-developers.com/android/apps-games/mod-dolby-atmos-t3109446
and an xposed module VolumeSteps+
http://forum.xda-developers.com/showthread.php?t=2884962
Might have to turn off the built in music fx EQ. Then I increased the volume steps to 15. I lowered the levels in dolby atmos to the volume level I like.
Just an FYI, in the stock, unrooted 3.5.4 update it allowed the lowest volume to go a bit lower (sounds about 1/2 as loud as the previous (3.5.3) low volume setting).
Happy!
Hi, just bought a Moto G6 at an Ohio Best Buy store. Speaker volume for things such as Youtube videos, etc. generally seems adequate at almost all the way up, say 8 or 9 out of 10. However there is often annoying sibilance in the audio (harsh "s" and "t" sounds) at any volume. The other audio glitch I noticed is when the volume slider is low, tone sounds more balanced, has some bass, but as you raise the volume, the sound will get more and more tinny, with all treble and no bass. Again, generally need to set volume near but not at the top. I tried the Dolby EQ part with movie, voice, music, and different EQ, and the 2 problems still persist. Phone is running Oreo 8.0.0. Thanks.
I know its an itunes eq but mimicking these settings on other devices has worked for me..
http://osxdaily.com/2009/09/30/itunes-equalizer-the-best-itunes-equalizer-settings/
Hi,
I recently bought Redmi Note 10 Pro and it is on MIUI version 12.5.4. I have noticed that the volume automatically increases or decreases when I'm listening to music. This happens on every music app be it amazon, spotify or retro. I haven't noticed if the volume decreases on the speaker but it is more noticeable when I'm using earphones.
The volume decreases when the chorus or loud part of the music comes and volume increases when the music is low or slows down. When I check the volume bar to see if there's a change in that, there was none and the volume was set at the same level. I hope I'm making sense.
Is anybody else experiencing this? Is there a way to fix it?
Thank you!
I had the same issue and turing off Dolby Atmos helped so now I only use it when on speaker. For earphones and other jack/bluetooth devices I use old eqalizer
hello, 12 pro sound is beautiful but volume is too low . I tried different options for dolby sound effects but still volume is low. any solution?
Iam also facing the same
You can tweak the equalizer in the dolby sound setting. I tweak it and the sound is better.
The max volume capacity of Xiaomi 12 pro speakers is around 20% higher than default. So to reach near maximum, Use custom equaliser in dolby settings and set all the frequency bands to 100% level. I didn't notice distortion and the volume is higher now.