Related
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed but with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding upon reboot. Even I tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1. Downgraded to ma6 also with same results.
I can goto download and recovery mode. Please advice!
Edit:
In download mode:
Custom binary download : yes (1 counts)
Current binary :Samsung official
System Status : official
timberwolf60 said:
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed by with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding. Even I reset tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1 and status modified.
I can goto download and recovery mode. Please advice!
Click to expand...
Click to collapse
torch screen? or you mean touch screen?
iamnoo said:
torch screen? or you mean touch screen?
Click to expand...
Click to collapse
Yes, no responsed, press power button and I can't off it. Removed battery to off. Look like the digitizer was faulty. Due to flash counter = 1 and void the warranty.
Sent from my GT-P5100 using xda premium
After factory reset, I have the bootup screen as shown, , all button on screen were no responded. Please advice. Before upgraded to mb3 firmware, everything was working.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Need help! I used cf auto root for rooting on 4.1.1 JB was successful. Later I used mobile odin to upgrade to I9305XXBMB2 which was a Singapore ROM. Flashing was completed but with back screen. So I used pc odin flashed I9305XXBMB2 with success. but my torch screen was no responding upon reboot. Even I tried factory reset still with the same reslult. I can't send it to the Samsung Service center due to flash counter = 1. Downgraded to ma6 also with same results.
I can goto download and recovery mode. Please advice!
Edit:
In download mode:
Custom binary download : yes (1 counts)
Current binary :Samsung official
System Status : official
Click to expand...
Click to collapse
Try Emergency Firmware restore on Kies. If that is not successful then I guess you could flash CWM (non touch edition) and then try find a way to reset your flash counter in recovery or download mode then warranty it. If not then you will have to pay up, $210 here in Aus to get screen/digitalizer/frame repaired (built together) at a Samsung place & that also renews your warrenty
Sent from my GT-I9305 using xda premium
Magik_Breezy said:
Try Emergency Firmware restore on Kies. If that is not successful then I guess you could flash CWM (non touch edition) and then try find a way to reset your flash counter in recovery or download mode then warranty it. If not then you will have to pay up, $210 here in Aus to get screen/digitalizer/frame repaired (built together) at a Samsung place & that also renews your warrenty
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Thank for your replied which gave me hope. Can you kindly guide me or provided me some links, enabled me to started. Which cwm none torch version can reset counter. I tried the kies first.
Edit: kies updated to latest, some result.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Thank for your replied which gave me hope. Can you kindly guide me or provided me some links, enabled me to started. Which cwm none torch version can reset counter. I tried the kies first.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
To reset the binary in download mode you need a USB jig (search to buy one online) or here is a guide for a DIY one:
http://www.androidtechno.info/2013/02/diy-usb-jig-for-samsung-galaxy-s3-to.html?m=1
Sent from my GT-I9305 using xda premium
Magik_Breezy said:
To reset the binary in download mode you need a USB jig (search to buy one online) or here is a guide for a DIY one:
http://www.androidtechno.info/2013/02/diy-usb-jig-for-samsung-galaxy-s3-to.html?m=1
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
USB jig won't reset binary counter on i9305..... You need to install stock ROM & kernel and after that use new version of TA (Triangle Away)... Job done.
Sent from my GT-I9305 using xda app-developers app
djembey said:
USB jig won't reset binary counter on i9305..... You need to install stock ROM & kernel and after that use new version of TA (Triangle Away)... Job done.
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Thank for helping. My torch screen no responded. If TA have a non torch version it may help.
Sent from my GT-P5100 using xda premium
timberwolf60 said:
Thank for helping. My torch screen no responded. If TA have a non torch version it may help.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
I don't think there is any Non-Touch version of TA.... unlucky
Edited:
since your phone is running stock ROM&kernel you can try USB jig, that's the Only thing left to try to get back your warranty. In my case jig won't reset counter but I'm using Custom ROM .... Can't remember how was it on stock. TA works for sure but must be installed first, you can't use your screen so jig is your last chance. ..
Sent from my GT-I9305 using xda app-developers app
Try this rom, you need to do it from a PC, set in download mode then use Odin to flash the rom.
This will then put it back to stock with no increase in the binary count.
http://forum.xda-developers.com/showthread.php?t=1942150
Good luck
Raistlin1158 said:
Try this rom, you need to do it from a PC, set in download mode then use Odin to flash the rom.
This will then put it back to stock with no increase in the binary count.
http://forum.xda-developers.com/showthread.php?t=1942150
Good luck
Click to expand...
Click to collapse
Downloaded bma6 pre rooted, no changed in flash counter on download mode. Still 1. Thank for all the suggestion. Cashed closed.
Sent from my GT-P5100 using xda premium
Now you have put this rom on use triangle away to remove the 1 count.
It worked for me.
Raistlin1158 said:
Now you have put this rom on use triangle away to remove the 1 count.
It worked for me.
Click to expand...
Click to collapse
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
djembey said:
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Usb jig not worked for I9305, counter remain 1. It worked great for I9100.
Sent from my GT-P5100 using xda premium
djembey said:
Hehe..... good one You've missed a small detail, his screen lost touch control so he can't use apps... we trying to work out how he can reset a binary counter in download mode to get it back under warranty. ...
I own a USB jig but can't be bothered to go back to stock and test it... sorry mate
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
Is SOO simple.....
Just use an usb adapter and connect any mouse.
Any way Seems like faulty Melfas firmware flash.
Try that code in your dialpad.
*#2663#
Thank's
ausdim said:
Is SOO simple.....
Just use an usb adapter and connect any mouse.
Any way Seems like faulty Melfas firmware flash.
Try that code in your dialpad.
*#2663#
Thank's
Click to expand...
Click to collapse
Good ideal, will try it before send to service center. *#2663# not working. But not big deal now, TA reset couter and all the status official. I will send for warranty claim. Thank for all people's help.
Sent from my GT-P5100 using xda premium
Guys do you really think Samsung cares? I mean I had an Asus Transformer Prime with an unlocked boot loader. When unlocking it clearly stated the warranty is voided. A few months later my battery died and I sent it in as it was and they fixed it. I even told them it was unlocked and they fixed it.
I then heard and read somewhere that the warranty is lost to software related issues not hardware.
But oh well he reset it already. I only reset to get stock stock updates because I get bored sometimes!!
Sent from my GT-I9305 using xda premium
jetbruceli said:
Guys do you really think Samsung cares? I mean I had an Asus Transformer Prime with an unlocked boot loader. When unlocking it clearly stated the warranty is voided. A few months later my battery died and I sent it in as it was and they fixed it. I even told them it was unlocked and they fixed it.
I then heard and read somewhere that the warranty is lost to software related issues not hardware.
But oh well he reset it already. I only reset to get stock stock updates because I get bored sometimes!!
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
In singapore samsung services was the best compared to other brand, nokie sonyErison no good. That why I stick to Samsung phone. The next was S3 lte for me. The phone on this thread was belong to friend.
Sent from my GT-P5100 using Tapatalk 2
timberwolf60 said:
Good ideal, will try it before send to service center. *#2663# not working. But not big deal now, TA reset couter and all the status official. I will send for warranty claim. Thank for all people's help.
Sent from my GT-P5100 using xda premium
Click to expand...
Click to collapse
how did u get TA work with urs no respond touch screen????
Hey folks,
after rooting my XZ 10.1.A.1.434 (C6602) with the old Root method (goroh_kun's) and everything went great i find out that every time i try to access root the device reboots, till i came out with the new Root method ROOT MANY ANDROID method, but unfortunately it always stuck at the white screen when i press Display at the Services menu
any fix or solution for this?
Reboot your phone and try again?
Sent from my C6602 using xda premium
gm007 said:
Reboot your phone and try again?
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
are you serious man? I've been rebooting my phone for the previous 2 days, I've rebooted the phone, the PC, trying over another PC, so please any real fix here?
I am using doomlord's rooting method and never had any issue.
Sent from my C6602 using xda premium
gm007 said:
I am using doomlord's rooting method and never had any issue.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
appreciate any link for a tutorial or even the latest version, plz
http://forum.xda-developers.com/showthread.php?t=2186368
Sent from my C6602 using xda premium
when stuck, open Windows task manager and kill ADB blah process, the bigger size one perhaps...
you can see more than one ADB processes there...
I don't know why but it works for me...
I had this problem and did a phone repair through the PC companion software. It's a pain to have it back to stock but since you've found no other way you could try this.
i had this problem yesterday noon... i solve it with factory reset ... after this i did the root process again with no problem.
Hi,
after flashing the CWM Recovery System (http://forum.xda-developers.com/showthread.php?t=2012738) to a ROOTED, but bootloader-LOCKED Xperia T everything worked, but:
- WiFi ist broken. It does connect to my LAN, the Phone shows up in the network if I do a scan, it respondes to ping, but I dont get any internet connection?!?
- From time to time I get some unstable responses from the UI (taskbar).
It's the NEW phone of my wife, I need to fix the WiFi...
PS:
Tried also this package:
http://forum.xda-developers.com/showthread.php?t=2007741
And I tried the CWM removing tool:
https://www.dropbox.com/s/emo2h2wxbt4jwqn/CWM4XperiaT_Remover.zip
Nothing helped
Xperia Z forum??
Flash a stock firmware with flashtool or use sony update service to repair your phone.
Sent from my C6602 using xda premium
gm007 said:
Xperia Z forum??
Flash a stock firmware with flashtool or use sony update service to repair your phone.
Sent from my C6602 using xda premium
Click to expand...
Click to collapse
I'm not able to post in the xda xperia T forum.
After flashing the CWM OTA update isn't possible anymore.
Would be nice to find a solution WITHOUT loosing all my stuff/new install after flashing a new firmware.
fixed it via update via pc with sony update service to GB and re-root with bin4ry.
http://forum.xda-developers.com/showthread.php?t=1886460
Hi,
I am not able to update my XZ to the latest .244 firmware. Here are some info of my Phone.
1) locked bootloader (it is unlockable)
2) current on .423 firmware.
3) rooted
4) install superSU (with survival mode on)
5) install OTA rootkeeper.
I saw some post stating that they are able to keep root after OTA, so i am hoping to keep my root too after OTA.
please advise.
I have exactly the same problem. Cant do OTA and im states scared to update through PC companion since my friend bricked up the phone.
Sent from my C6603 using Tapatalk 2
Are you running stock .423 odexed? I had this issue when I flashed a deodexed ROM then tried OTA update
Sent from my C6603
Hi,
It is not possible to do a OTA Update after deleting one or more system apps (even stuff like partnerbookmarks).
There are, however, 2 ways to get the Update.
1.) Follow some of the instructions here like this: http://forum.xda-developers.com/showthread.php?t=2287149
There are some other ways posted here at xda. They use the flashtool to flash current firmware.
2.) Use Sony PC Companion, this will work ALWAYS,but: Root will be gone. U can use Doomlords rooting method to get Root again:
http://forum.xda-developers.com/showthread.php?t=2386405
Good luck
hutilicious said:
Hi,
It is not possible to do a OTA Update after deleting one or more system apps (even stuff like partnerbookmarks).
There are, however, 2 ways to get the Update.
1.) Follow some of the instructions here like this: http://forum.xda-developers.com/showthread.php?t=2287149
There are some other ways posted here at xda. They use the flashtool to flash current firmware.
2.) Use Sony PC Companion, this will work ALWAYS,but: Root will be gone. U can use Doomlords rooting method to get Root again:
http://forum.xda-developers.com/showthread.php?t=2386405
Good luck
Click to expand...
Click to collapse
I flashed mine .423 using flashtool, so guests I needed update using pc then...
Sent from my C6603 using xda premium
Flashben said:
I flashed mine .423 using flashtool, so guests I needed update using pc then...
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
PC Update will never fail, the only thing is that you lose root access, which can be easily recovered though.
hutilicious said:
PC Update will never fail, the only thing is that you lose root access, which can be easily recovered though.
Click to expand...
Click to collapse
Yeah, just updated and rooted
Sent from my C6603 using xda premium
PLEASE HELP
my xperia Z , c6602 , got new update .244
tried to update using fone , downloded 175 mb and restrted, updating proceess came up (android logo) automatically rebooted when the progress bar about 75% , not updated same old .423
tried 2 times same issue,
then i tried using sony pc companin(win8), donloaded updated and strted update process, progress bar 90% came up error that update failed,
disconnect phone,
NOW phone didnt boot up
only SONY logo coming and switchs off.
pls help
It could be brick....
Sent from my C6603 using xda premium
Flashben said:
It could be brick....
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
thanks for responce, so what i can do now?
diz_007 said:
thanks for responce, so what i can do now?
Click to expand...
Click to collapse
Hi mate, dont panic. Just follow the instructions on how to flash a stock firmware with flashtool. This is already described here at xda, try searching for it. It will repair your phone but data may be lost.
Look at this: http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda app-developers app
hutilicious said:
Hi mate, dont panic. Just follow the instructions on how to flash a stock firmware with flashtool. This is already described here at xda, try searching for it. It will repair your phone but data may be lost.
Look at this: http://forum.xda-developers.com/showthread.php?t=2240614
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
thanks.. i tryed repaIR OPTION FROM pc companin, data lost! but updated to latest and good now!
Hi, I have the C6903 4.3 14.2.A.0.290 and I would like to get to the newest stock rom 4.4.4. I would be very glad and thankful if anybody had the time to give me a step by step as I have completely forgotten how to do everything (long time ago I rooted the Z1) Give me a step by step in how to remove my root and wipe everything on the phone so it's factory reset and newest version.
Thanks!
Just update using pccompanion, or flash a 4.4.4 ftf using flashtool, then root it using newroot. Follow my signature links for help
Sent from my C6903 using XDA Premium 4 mobile app
gregbradley said:
Just update using pccompanion, or flash a 4.4.4 ftf using flashtool, then root it using newroot. Follow my signature links for help
Sent from my C6903 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
If I update using pccompanion does it completely remove root and leaves my old apps behind or does it completely wipe everything?
Hanozy said:
If I update using pccompanion does it completely remove root and leaves my old apps behind or does it completely wipe everything?
Click to expand...
Click to collapse
The apps will remain if you use Pccompanion but you will loose root. However if you use flashtool there is an option to wipe everything, so you can choose if want to leave the apps or remove them.
The best way is by using "SEUS"...Cleanest and best method ever existed...
It wipes out everything!