Hi Everybody!!
I'm serching for help because i get a bit confused on various guides to install an alternative rom in my Kindle Fire; the point is that this tablet has a stok so that is quite annoying and i wanted to get rid of it.
What i've undertood by now is that i have to:
- Root the device
- Install TWRP/Bootloader
- Install custom Rom
My problem is that i dunno what guide i should follow, because my actual firmware version is 7.4.6, and i've read that i may need to revert back to 7.2.3 and i didn't understood how to do it.
I will need a factory cable? Where I get the software to do it?
Technically you don't need to downgrade the os, only the bootloader. I recommend this guide: http://forum.xda-developers.com/showthread.php?t=2271909
A fastboot cable is not required but is recommended in case you mess up. If your device is not yet rooted you can root it with binary's root. Turn on usb debugging under your kindles security settings and use the drivers in my signature to update the unknown devices drivers. When rooting if you use the latest version of binary's root I believe you must choose "old" as the method to root.
If you follow the tutorial I linked above for twrp and 2nd bootloader there is something I want to point out. When you follow then instructions and open the fireflash app, there should be red warning text about downgrading the bootloader, you need to make sure you check the box above/next to that warning text, somehow people miss it and the result is a red screen brick that only a fastboot cable can fix. Secondly I just recommend to put the ROM and corresponding gapps you plan to flash on the kindle ahead of time. Its just a good idea to in case you get stuck in twrp.
Sent from my Amazon Tate using Tapatalk
It ended up that at the time i posted the question i wasn't on the mood for installing the rom, but today i decided to ge rid of amazon's os, and everything worked like a charm, so thanks!! The video linked in fireflash app post was very well made
Hello XDA,
I just purchased a new Acer Iconia One 8 B1-850 and was wondering if I could root it.
I see many posts on B1-810 and similar, but nothing for the B1-850.
CoreyGamingTV said:
Hello XDA,
I just purchased a new Acer Iconia One 8 B1-850 and was wondering if I could root it.
I see many posts on B1-810 and similar, but nothing for the B1-850.
Click to expand...
Click to collapse
same here
i want to root to enable the multi user option by updating the build.prop file, i've been able to connect with ADB but the device isn't visible in windows or mac (tried both) when you reboot into boot loader, in fact it doesn't appear to boot into boot loader it just seems to power off (when using ADB reboot command or choosing boot loader from the recovery menu) so i wonder if its locked out somehow??
Need it too. Did anyone find a way to root B1-850?
Thanks!
dtalas said:
Need it too. Did anyone find a way to root B1-850?
Thanks!
Click to expand...
Click to collapse
I too just purchased a B1-850 tablet, but I've figured out how to root it. Really quite simple. Just use Kingroot:
1.) Navigate to https://kingroot.net/ from your tablet
2.) Download the APK for android
3.) Install said APK (this requires you to have allowed installation from unkown sources in the "Security" panel of the settings menu)
4.) Load up the app and follow its instructions
5.) Reboot and try it out
For good measure, I would also unlock the "Developer Options" panel and allow USB debugging (adb access) and such; I did this before proceeding. You'll have to search for instructions on that yourself, its well documented.
This all worked for me this morning! Really looking forward to unlocking the potential of this cheapy tablet.
Kingroot worked first try, just swap their super user program with supersu. I am having trouble installing the xposed framework though if anyone has any tips.
I was able to root, now I need to install a custom recovery. CWM says this model is not in the supported list. Has anyone been able to install a recovery? I need NANDROID backup functionality.
I made a thread walking you through how to do it on this tablet in the guides area but just use flash fire for recovery and xposed install
Did the B1-850 hardware updated in anyway? I was able to root it in June 2016, but after a screen repair and factory reset and fresh rom from acer, king root and all others can't work. I'm stuck without any root options. Any idea?
Same here
Dylfaus said:
Did the B1-850 hardware updated in anyway? I was able to root it in June 2016, but after a screen repair and factory reset and fresh rom from acer, king root and all others can't work. I'm stuck without any root options. Any idea?
Click to expand...
Click to collapse
There was recently new firmware released for this tablet (08/24/16, Build #: AV0L0.RV09RC04.WW.GEN1), and a handful of updates (08/25/16, 08/26/16) from Acer. I have this same tablet, and I'm unable to root after flashing to the firmware released on the 24th, and latest firmware (Build #: AV0L0.RV0BRC02.WW.GEN1) as well. Hopefully someone can find a fix, as the few different methods I've attempted simply will not work with the latest firmware from Acer.
On KingRoot Please click submit search if enough people do they will find a root until then just hold tight.
jared407 said:
On KingRoot Please click submit search if enough people do they will find a root until then just hold tight.
Click to expand...
Click to collapse
I have done this a bunch, sadly still no love. It's annoying me not being able to root a relatively cheaper tablet, as these tend to get rooted first since they get in more people's hands faster. Oh well, just have to have patience.
Thanks, I was having problems, two different rooters failed and I wondered if it was the recent software update! The image version on my B1-850 is the same as you have quoted! Please post if you find a solution, some apps that need deleting are annoying.
---------- Post added at 06:23 PM ---------- Previous post was at 06:13 PM ----------
random4t4x14 said:
There was recently new firmware released for this tablet (08/24/16, Build #: AV0L0.RV09RC04.WW.GEN1), and a handful of updates (08/25/16, 08/26/16) from Acer. I have this same tablet, and I'm unable to root after flashing to the firmware released on the 24th, and latest firmware (Build #: AV0L0.RV0BRC02.WW.GEN1) as well. Hopefully someone can find a fix, as the few different methods I've attempted simply will not work with the latest firmware from Acer.
Click to expand...
Click to collapse
I was having a problem rooting my device and wondered if it was the recent software update, and my image version is as you have quoted! I f you manage to root your device please post!
knockout350 said:
I made a thread walking you through how to do it on this tablet in the guides area but just use flash fire for recovery and xposed install
Click to expand...
Click to collapse
Which recovery do you install with flash fire; I don't see a link to it in your other thread?
Success!
The latest release of KingRoot is able to root the latest firmware for this tablet. I saw there was a new release of KingRoot back on the 23rd, and it's working as it should. I grabbed the working version here -> http://forum.xda-developers.com/devdb/project/dl/?id=21707
hi guys. any idea how to recover b1-850 from bootloop?
I no its a little late but i rooted mine with the kingoroot one click root apk. Ive installed xposed framework and customized like crazy everything from fonts to boot animation. Cant find a custom recovery tho.
I cannot root it with any of the tools I have tried (Kingo ROOT, KingRoot, etc). Anyone know any method that works?
Acer B1-850. Is this device even rootable?
This device has made an idiot of me. If I can be of any assistance finding a root exploit for this device let me know. I will gladly write a detailed procedure of the process. I made the mistake of assuming since it was an entry level, inexpensive device, the path to root would be simple. Three months later none of the common "one-click" programs has found an exploit. I have a copy of stock rom for recovery so testing is not a problem for me. It's a matter of pride at this point. So much so I found one on sale for $60 and bought it just for this purpose. I have followed every link I can find associated with this device to a dead end. Any help will be appreciated.
pdnorman said:
This device has made an idiot of me. If I can be of any assistance finding a root exploit for this device let me know. I will gladly write a detailed procedure of the process. I made the mistake of assuming since it was an entry level, inexpensive device, the path to root would be simple. Three months later none of the common "one-click" programs has found an exploit. I have a copy of stock rom for recovery so testing is not a problem for me. It's a matter of pride at this point. So much so I found one on sale for $60 and bought it just for this purpose. I have followed every link I can find associated with this device to a dead end. Any help will be appreciated.
Click to expand...
Click to collapse
Same here, still no root for me. Usually these cheapo tablets are not as locked down.
Still waiting!?
I have given up getting assistance from xda on this device. Its as political here as anywhere else. I don't drive a Samsung so nobody wants to help with root. I've heard every excuse from locked bootloader (unlockable in dev options) to what one dev actually told me,"There's little interest in spending energy on an inexpensive device." I understand, but why misrepresent the site by implying all android devices are treated the same? Hell on the Iconia One 8 thread, it says that the B1-850 does not have a MTK SoC, but instead has an Intel Atom chip. Then they send you to another thread where, of course, there is no B1-850 listed! That's because it uses a MTK8163 SoC. In both tablets.
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Bob Boblaw said:
Hi all
I've just bought a Fire Tablet on Amazon day with the intention of rooting it and installing CM, but I am a newbie and there's so much information on here it's kind of overwhelming, and most of it has a lot of "if this, then that, or if you want to use that, do this" type guides, which for someones who doesn't really know what all the different methods and options are is really confusing!
So can someone please tell me the step by step process for doing it?
From what I've read I think I have to downgrade to 5.1.2 of the OS as I can't root on 5.1.4? Is that correct?
So do I have to root before I do that? Or do I downgrade first and then root, and then install the CM?
If someone can list each of the steps I need to take to get it from a fresh new 5th Gen Fire 7 to having all the Amazon rubbish off and having it running CM, then I can look for the guides for each step!
Thanks, I hope that makes sense!
:angel:
PS: I've already bricked one by trying to downgrade to 5.1.1 because that wasn't apparent until it was too late, replacement on its way!
Click to expand...
Click to collapse
I did the same thing, bought the tablet on prime day and was successfully able to root it and put the AOSP nexus rom
First things first make sure you have the 7-inch tablet for the following steps because apparently it only works with that specific model. Since this is my first post I can't post any links so sorry about that however, I have added the video title so that you can just google it and find the video.
Anything above fire os 5.1.2 ( that is 5.1.4, 5.1.3, 5.1.2.1) has to be downgraded to 5.1.2.
Also downgrading from 5.1.4 to 5.1.1 is going to give you a hard brick. I don't know how you didn't know that but it was clearly stated in the xda guide I was following
Basically you have to follow rootjunkys video and instead of using the file he uses in the video use the fire OS 5.1.2 file which is also available on his website.
Imortant: Do a factory reset before downgrading. I did not do that and the rooting process did not work.
Video title: How to Firmware Restore or Unbrick your Amazon Fire 5th gen Tablet
After you have fire OS 5.1.2 follow the rooting process shown in another rootjunky video
Video title: How to root the Amazon Fire 5th gen 7in on Fire OS 5 1 2 SuperTool Mac linux and Windows
Note: He shows how to do the whole process while using mac but it can be done on windows awell and the windows files are already present. Instead of using the .sh file and opening the terminal double click the .bat file and follow along.
You can use his SuperTool to put the play store app and fire flash app.
Note: For some reason fire flash was not working properly for me by using the SuperTool, so I just installed it from the google play store.
Now you should have rooted fire OS 5.1.2 along with superSU. Now with the fire flash app and you can download any rom that you want to flash. Follow the steps in the video for instructions
Video title: Amazon Fire 5th gen AOSP Nexus rom install with Flash Fire app
Hope this helps.
All credit to rootjunky
erikthebikeman said:
Yeah, I read the same thing and I bought it on Prime day. When's the 5.14 tool going to come out? I know, beggars... I really think it's silly to have to downgrade and risk bricking it when normal root for those OS versions don't have such a concern.
Click to expand...
Click to collapse
It's not a matter of someone getting off their keister and whipping up a "tool" (presumably you are talking about root) that works with FireOS 5.1.4 or whatever the latest version is. Like many manufactures Amazon actively discourages rooting devices and attempt to block known exploits. It's a cat and mouse game. We may see a "tool" soon, much further down the road or never. Be happy you can root the device at all and be thankful for the individuals who unselfishly share their time and talents with the community.
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Bob Boblaw said:
Thanks nefarian.
The problem was that the guide I was referred to for getting CM onto it already assumed it had been rooted, and when I started googling and looking on the different guides on rootjunky there were so many coming from different angles but nothing giving the clear start to end steps for what I wanted to do, for a newbie it was very confusing. Plus in the guide I was following (a rootjunky one) he had an older version of the OS and the toolkit had different files/folders to what are in it now, so I guess at that time there was no mentioned of 5.1.4 and not being able to go back.
After thinking I needed to downgrade the OS I found the one for unbrinking and downgrading and did that fine to 5.1.2, but then when I tried the superkit it still said it was too new, so I tried to downgrade further, which is when I bricked it.
There was no mention of it on the video..... other than a bloody great overlay in the corner, which must have been added later on, and probably because I was tearing my hair out and getting confused I didn't spot it. That's my excuse anyway!
Thanks for your help, I'll have a go with the new one on Monday. So instead of trying to find an all in one guide, I need to find guide for the steps in this order;
1 - do a factory reset on the device (from the device settings, or do I need to do it in the bootloader settings?)
2 -downgrade to 5.1.2 (I should be able to do this now)
3 - root the device (and install supersu?)
4 - install CM
Then it should have full CM and none of the Amazon OS left.
I'm not missing any steps there am I?
Thanks again!
Click to expand...
Click to collapse
- no need for a factory reset at any point; offers no benefit for what you are trying to accomplish.
- installation of SuperSU (replacing Kinguser and related Kingroot cruft) after rooting is highly recommended prior to using FlashFire or any other tool that messes with the system partition. The SuperTool can facilitate this otherwise ugly task.
- if you are struggling with RootJunky videos you should give serious consideration to the challenges of installing a custom rom. It doesn't get any easier going forward.
Thanks. I managed to root my Nvidia Shield TV fine so I should be able to do it, I just needed to be clear of the full process from start to finish, and as I wasn't starting from the beginning of the process that made it more confusing. The rootjunky videos are great, but when someone is saying you can use this or that or do this or that it's putting choices and variables in to the mix so it's not a straighforward step by step, and when the kits and the webpages shown on the videos have changed since they were made, for someone trying to piece the info together it takes a bit more time.
Maybe I should point out that I didn't look on here initially when I started trying to do it, I basically saw the fire on offer mentioned on a forum I use and someone said yeah, it's easy to root and get CM on if, just user this video, with the link to a rootjunky YouTube video which didn't mention the prerequisite of already having downgraded the OS (why would it) so in hindsight I didn't start at the right place or have the best information.
After reading through some stuff on here (and that's over whelming for a first timer as there is so much stuff on here for many, many devices and platforms - even just finding the Amazon fire sub forum on an iPad wasn't easy!) I'm getting a better idea for attempt two.
I'll get there, and at least I know how to not brick it now! :good:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (
&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
- Kingroot/Purify, not Kingmaker/Purity
- I can't think of a better suite of guides than the videos produced by RootJunky
- use FlashFire 0.51 to install (flash) the rom of your choice
- OP for Nexus rom has video link and and basic FlashFire guidance
- get over the minor variations in the language/tools used to support this device between the making of videos and the latest release.
Bob Boblaw said:
OK, so making progress. I have downgraded the new one fine, it now has 5.1.2 of the Fire OS.
I've used rootjunkys supertool to root the device with Kingmaker, which then installed SuperSU, and I finally uninstalled Kingmaker/Purity.
So I now have a rooted Fire, which is great. I have also installed the Google Play store, disabled OTA updates and removed ads from the lock screen. But I don't want the Amazon OS on it (pretty fugly isn't it!), so the next step, flashing it with CM.
What guide would be best for a Fire with 5.1.2 on it? When I look at the Rootjunkys guide for installing CM on the Fire (https://www.youtube.com/watch?v=4dwguHoxTvo&feature=youtu.be) the super tool kit does differ, and the one I downloaded from his link only has the tool for doing it for OS 5.0.1, so it won't let me boot into TWRP recovery. What would be the best tools/guide/method to use for installing CM onto a Fire with 5.1.2?
Thanks
Click to expand...
Click to collapse
1. Get the CM rom and put it in the tablet from here: http://forum.xda-developers.com/amazon-fire/orig-development/rom-cm-12-1-2015-11-15-t3249416
2. Install FlashFire 0.51 from play store or use the SuperTool
3. Follow the video instructions and instead of the nexus rom use the CM rom you downloaded:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Bob Boblaw said:
Thanks guys. All going well. CM12 is now installed using that Nexus guide. However, because he used Nexus the Play store was installed by default, which CM12 doesn't have.
Looking here - https://wiki.cyanogenmod.org/w/Google_Apps#Installation - I need to download Google Apps and install it, but which package for the Fire 7 5th gen? There are a number of variants to choose from. Looks like using twrp it would have been a pico one, but as it's a new OS a different one is needed?
So it's ARM device, Android 5.1 and Nano variant?
That gives me a zip file, but I can't work out how to install it. The videos I've found all have it as being installed as part of the OS installation via twrp. Should I have installed gapps when I installed the CM12.1 OS, or can I still install it later?
When I go into the boot menu the only install option is to apply update from ADB, wipe data/factory reset, wipe cache partition, reboot to bootloader or power down/reboot.
I tried to use apply update from ADB and did "adb sideload gapps-filename.zip" but it failed to complete the install and went back to the boot menu.
What do I need to do to get Play Store on there?
Thanks again
Click to expand...
Click to collapse
Reinstall FlashFire 0.51 (here) on CM 12.1 then use it to flash the GAapps package. Agree with your selection: ARM/5.1/nano.
Ah, great, thank you, yep, that's got it on there.
Excellent! All modded and running very quickly! Thanks for the help guys, I appreciate the patience.
Not much space on these Fire's is there, it's already telling me it's low on space and I've only installed MediaMonkey!
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage? For example, my Shield TV lets me 'add' the SD card to the main storage so it sees it all as one instead of a second removable device, so can install apps on it, etc. If this possible with Cyanogenmod? (Not sure what you'd call that feature to search for it!) Thankfully the main reason I bought it was to help manage my music with MediaMonkey so I won't be installing lots on it, but if it is possible it would be useful.
Second, with regard to OS updates on CM, are they automated or do they need to be done manually (and, if so, with care?)
Thanks again!
Bob Boblaw said:
Two more quick questions and I'll leave you alone....!
Is it possible to have the SD card to be used as combined storage?
Second, with regard to OS updates on CM, are they automated or do they need to be done manually ...
Click to expand...
Click to collapse
Short answer: 'yes'. There are various approaches to utilizing SD cards for app installation/storage each with pros, cons and compromises. I highly recommend using a tool that leverages 'symbolic links' which is by far the most reliable method. An example is Link2SD which you can find in the Play Store.
All custom roms for this device are updated manually via FlaahFire or TWRP (if available). Instructions can usually be found in the OP.
@Bob Boblaw
did you open up the file manager and install the flashfire.apk? I am on the same problem you had on your post #11, but my problem I ran into now is flash fire says "root access could not be acquired" otherwise this would be a easy to do.
I think I might have to reinstall everything and start over. >_<
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Bob Boblaw said:
Yes, I copied it over via USB and installed it from the file manager. Do you have root enabled in the developer settings, I enabled it for adb and apps.
Click to expand...
Click to collapse
Yes! Thank you, that is what I had missed plus I didn't reboot my device so took like 15mins trying to figure out why it wasn't still working.
Glad you got it working ! :good:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
thunderman98 said:
Great post guys!! I am getting ready to root my fire OS 5.1.4 and this helps me greatly! Been searching for a downgrade guide and this is it! Have one question is Cm only recovery program or is there a TWRP version for this ? I would think that lastest TWRP would work since its all android but have to ask .I like TWRP myself cause i have it on rooted tablets
Click to expand...
Click to collapse
You can not boot/install/use twrp on this device unless running FireOS 5.0.1 or lower. Nor can you rollback to any version below 5.1.2 without bricking the device. FlashFire is the tool of choice for installing roms and performing other maintenance tasks that are typically done in a custom recovery environment.
Hello, good day, I am searching for a n00b friendly way of rooting an HD 7" thats is running the system version 7.5.1.
EDIT: I managed to root it, but I am now searching for an easy way to install TWRP.
also what custom rom's would you rec?
How did you root you fire 7? Please tell me been searching for ages.
I followed the youtube video: https://forum.xda-developers.com/showthread.php?t=2551661. The files needed are in the notes below the video.
I followed with installing 2nd boot loader and TWRP.
Could one have not just restored to a 7.2.3, for example (https://forum.xda-developers.com/showthread.php?t=1951254), which appears to be prerooted, then used FireFlash to flash all the necessary files?
I'm going through this process myself, as a noob. What I'm finding is that it's fun and not terribly difficult, but that a lot of the information out there is getting a bit old since 2015 or so. I'm taking notes along the way though and will try to share something to help others follow along.
Yes, there is a moutain of info to trawl through. a lot of it quite detailed, technical and not the sort of operation where you can screw up so you have to digest it all carefully.
THEN you discover that it all stopped working about 5y ago and you start again. Very frustrating and hugely time wasting.
As a last resort I installed KingRoot, but now I can't get rid of the damned thing. There's no uninstall option and if I pull the apk , su no longer works.
I'll look at the two links above . Thanks.
Duncan Idaho said:
Hello, good day, I am searching for a n00b friendly way of rooting an HD 7" thats is running the system version 7.5.1.
EDIT: I managed to root it, but I am now searching for an easy way to install TWRP.
also what custom rom's would you rec?
Click to expand...
Click to collapse
Hi...I just found this forum. Can you tell me how you rooted your kindle fire? I have one running 7.5.1 and I can't find any links or downloads that work.