Database Develop

Flickering screen while flashing via ODIN

Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!

Serenadier said:
Any help with this? I rooted & installed CWM on my Wildfire with no issues, but it seems like this phone's a tough nut. Can't start it up now, screen keeps flickering if I try to turn it on, don't think it can even boot up.
Your prompt reply is much appreciated!
Click to expand...
Click to collapse
Wildfire wrong section, this mini thread

apisfires said:
Wildfire wrong section, this mini thread
Click to expand...
Click to collapse
I mean I've done it before on my Wildfire, but there's a problem with this on the Galaxy Mini. Problem phone in question is the Galaxy Mini now.
Sorry for the misunderstanding.. any help you can offer me?

installed from where and how?

kandros said:
installed from where and how?
Click to expand...
Click to collapse
Okay so first I downloaded the OPS, Gingerbread firmware and ODIN. Then I installed Kies for drivers, and then I opened ODIN, inserted the OPS and Gingerbread firmware file, started the process.
Somehow when it came to the reboot part, the phone just kept rebooting (screen lights up, turns off, pause, repeats again) and it hasn't worked since.
Then now there's an error with setup connection which presumably has something to do with the drivers, so I reinstalled it but now setup connection keeps occurring...

Okay, now, I tried doing the whole process again... I'm stuck at 'Close serial port and wait until rebooting' as the phone constantly flickers on and off repeatedly with no sign of anything going on.
Somebody please help :/

Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?

Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App

Small_town_boy said:
Are you using the right version of odin,i think it's 4.31...?
Sent from my GT-S5570 using XDA App
Click to expand...
Click to collapse
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
roofrider said:
Still the same?
Firmware from Sammobile.com?
Wait...prob is while installing cwm or GB?
Click to expand...
Click to collapse
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..

download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk

Serenadier said:
Yup, 4.31, TASS v1.0 as OPS. S5570DXKPD_S5570OLBKPD for the firmware.
Problem now is I think the flashing works.. but somehow, the phone is somehow corrupt in a way that boot is not possible - nothing's possible except download mode.
I haven't played around with Samsungs, mostly HTCs so this is uncharted territory for me.
Yup, firmware from Sammobile.com. Problem is while installing GB. Will trying to install CWM first at least alleviate some of the problem?
In fact... I can't even boot into the original recovery. All that happens is the phone boots... and goes into an insane loop. Can't do anything else other than that.
Thanks guys..
Click to expand...
Click to collapse
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong

Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?

kandros said:
download again the firmware Nd retry.. till downloading mode works you are safe.. in general section FAQ post there is link and guide
Sent from my GT-S5570 using Tapatalk
Click to expand...
Click to collapse
Even when the firmware is being flashed, the screen constantly flashes on and off. Is this normal?
I'd try that, but I don't know if it would work...

roofrider said:
Fixed?
Try flashing a multi package 2.3.x file if the latest is a one package...
Btw are u Latin and using a Latin version?
Click to expand...
Click to collapse
I'm on Asia version, I downloaded a 2.3.4 Asian version too.
apisfires said:
list full name file you downloaded
1?
2?
3?
sometime, the name is wrong
Click to expand...
Click to collapse
1. From ODIN 4.38 + Tass.Ops.rar -
a. Tass_V1.0.ops
b. S5570_Odin Multi Downloader v4.38.exe
2. S5570DXKPD_S5570OLBKPD.zip
I don't think it's wrong, is it...?

Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.

dkn91 said:
Check for Tass_ops file sometimes it might be a possibility that ur using a wrong one.
Click to expand...
Click to collapse
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.

Serenadier said:
I downloaded everything again from the Gingerbread update thread, redid everything as instructions... the phone is still in a really fast bootloop.
Click to expand...
Click to collapse
Try flashing a 2.3.3 multi package firmware

roofrider said:
Try flashing a 2.3.3 multi package firmware
Click to expand...
Click to collapse
Doing that right away.
Is it normal for the phone to flicker on and off during the flash process, and after the flash process is complete, with ODIN showing PASS?

Okay, so installing a multi package firmware didn't work either. Now what. )': at wit's end here.

It won't flicker.
And when it's done it'll show pass.
While in download mode, Odin shows connected rite? A yellow box Appears?

Black screen. Help!

Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?

Try to go into download mode and reflash a gb stock rom via odin
Sent from my GT-N7000 using xda app-developers app

Jestina said:
Hey guys, I'm new to this forum and I got my Galaxy Note a few weeks ago.
And today I tried to root it, but I think somehow it went wrong, now my Note could be turnned on, but the screen just stayed black. No logo, just sounds. The two 'buttons' below would light up too.
Any suggestions on how to fix it?
Click to expand...
Click to collapse
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?

ThaiDai said:
Why do you not give us a few more details?
What did you do, where did you start, what went wrong?
Click to expand...
Click to collapse
Okay, I tried to root it using a pre-rooted rom, N7000DXLC2 and some md5 and tar file that came along with it, but I'm not sure if I'm doing it correctly, my actual baseband is LR1 and the kernel is LR2.
At first, after attempting to root it, I kinda of did it successfully, I reached the green android alien place, but there's alot of pop up saying that this progress ended (something like that, couldn't remember.)
So I decided, to find and download my actual baseband's stock rom and try to use Odin to flash it, it succeeded, but the problem is, my screen is staying black this time, But I know that my phone is still working, just that the screen is not displaying anything..

Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?

CJSlim79 said:
Are you able to get into download mode?
When you tried to flash the rooted ROM in ODIN was it a 3 part file or a single file?
Did you setup ODIN correctly as per instructions on this site?
Click to expand...
Click to collapse
Yeah I did get into the download mode, the first ROM was 3 part file, second one was a single file.. and yeah setup correctly.

Nobody knows a fix for this?

Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Ok -
You can get back into download mode - what happens when you try to flash a stock GB ROM in PC Odin, *Use a 1 part file from here*
http://forum.xda-developers.com/showthread.php?p=26455511#post26455511
You need to provide as much info as you can otherwise it is hard to help...
In ODIN - You said it was setup correctly? Where did you confirm this?

Jestina said:
Nobody knows a fix for this?
Click to expand...
Click to collapse
Read here. http://androidadvices.com/update-galaxy-note-n7000-gingerbread-xxlc1-236-firmware/2/
Read it carefully and do it at your own risk if you decide to flash it.

I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.

Jestina said:
I don't think it'll work.. I'm already back on my actual baseband, its just the problem with the screen, its black and it won't display anything. My phone is still working.
Click to expand...
Click to collapse
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..

+1, Definitely not a screen problem if you are able to go in download mode & see the green guy.
Just try to reflash via PC odin a GB ROM.

CJSlim79 said:
Are you on a complete STOCK setup? or custom kernel?
This is very odd - sounds like possible hardware fault if your phone is working but no screen - You definitely flashed the correct ROM yeah? I would still give a try to reflashing the STOCK GB via PC Odin..
Question - When you goto Download Mode - Do you see the Android Guy? If so there's something wrong with your flashed ROM and not a screen fault so a re-flash should resolve that..
Click to expand...
Click to collapse
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...

Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..

Black Screen
Jestina said:
I will try re-flashing it again, the problem is now I can't see whats on my screen, but I can get to download mode by prediction though...
Click to expand...
Click to collapse
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.

CJSlim79 said:
Ok but in download mode - do you see the Android guy?....or girl..????........
..
Click to expand...
Click to collapse
Seriously... your kidding right??
geist_100 said:
First sorry for my english.
If your phone is open but screen is not open. TRY following steps.
Flash this rom with Odin ( N7000XXLC1_N7000OXALC1_N7000XXLB2_HOME.tar )
Kernel: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5
if loading stop to hidden.img dont worry. try again loading rom.
i think solving the problem.
Click to expand...
Click to collapse
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!

CJSlim79 said:
Ok but in download mode - do you see the Android guy?.....or girl..........
If not there's a chance you've a screen problem.. or you flashed something you shouldn't have...
Give the Stock GB Flash a go through ODIN and report back..
Click to expand...
Click to collapse
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
lol that cracked me up thanks,
Thought android was androgenious, mwahahah
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'm pleased a couple of people picked up on it

Erm.. I've downloaded the CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5, but when I open it up its a zImage file.
What am I suppose to do with it? x_x
Edit; Nvm, got it!

letters_to_cleo said:
Seriously... your kidding right??
I would go with this route as well
@OP, I think what messed up your phone is you inadvertently flash either a wrong kernel..(a kernel meant for GB but your already on ICS or the other way around as well)
had the same issue you have before... **** I flashed a kernel not design for our NOTE....
After that, my phone just stays black.. but I could actually go to download mode... so what I did? Flashed it back to GB stock and work my way from there...
Hope that helps something bud
Cheers!
Click to expand...
Click to collapse
I did what you said, but now my note still stays black.. I guess its my screen problem now huh.. Weird..

After motherboard replacement, cant install paranoid

Hi
just recently i got a super hard brick then after the motherboard replacement cant intall paranoid rom and very often the phone gets stuck at boot logo.....
Even though many other custom roms are flashing easily like crash rom and criskelo rom, etc but every time i try to install paranoid it gets stuck at boot logo
any solution....

you didnt mention that you got your mb replaced in the other thread !
did you try to fix a brick yourself ?
try booting before flashing gapps

rraaka said:
you didnt mention that you got your mb replaced in the other thread !
did you try to fix a brick yourself ?
try booting before flashing gapps
Click to expand...
Click to collapse
yes first i tried it myself with riff jtagbox, when i failed then i sent it to samsung service center, they replaced the motherboard, now paranoid is not flashing at all
i also tried booting before flashing gapps... no success

redownload might be incomplete broken
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
redownload might be incomplete broken
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
i tried straxx, paranoid 0.4a, paranoid 0.5.... but no success
and when i flash roms like crash rom, cleanote rom, rocket rom.... all works good
its something wrong only when i try to install any version of paranoid....
i tried everything.... now i think (correct me if i m wrong) shold i flash pit file again through odin?
may be new partitions will work as i got the motherboard replaced just recently

could be, Id flash stock gb if I were you. But seriously, be careful, I dont think they will fix it a second time around
Sent from my GT-N7000 using Tapatalk 2

baz77 said:
could be, Id flash stock gb if I were you. But seriously, be careful, I dont think they will fix it a second time around
Click to expand...
Click to collapse
I'm sure they will keep fixing it as long as they get money. Usually in the form of a service fee or something.

just consult hg42 and/or forrest, they may be able to advise you better.....
this is not a general case but special scenario.....
ive read guys flashing a three file stock GB rom with the general pit file with repartition ticked in pc odin....
but im not an expert

Bricked via CWM

I flashed via CWM MUI v.3 cuz the v.4 needed v3 due a bug but it hang on flashing boot.IMG. so i had to took out battery. Since then no charging / detection / download mode by buttons. Possible Ultimate brick?

Can access recovery mode?

Thanks
dr.ketan said:
Can access recovery mode?
Click to expand...
Click to collapse
Dr. Ketan,
Black screen no detection no recovery

First make sure your battery is not completely empty. Try to charge with external charger or manage for other battery
Still nothing then manage for JIG as last option

Dr. KEtan,
I bricked the note with 95% then removed battery to prevent drain while briked. Will try JIG tonight., Will let u know

jeroen180 said:
Dr. KEtan,
I bricked the note with 95% then removed battery to prevent drain while briked. Will try JIG tonight., Will let u know
Click to expand...
Click to collapse
Jigged it... Its confirmed. It is the SUPER-brick. Superbrick via CWM wattaf...

jeroen180 said:
Jigged it... Its confirmed. It is the SUPER-brick. Superbrick via CWM wattaf...
Click to expand...
Click to collapse
What do you think it is related with brick? Is it your fault of kernel or ROM fault. It is really annoying situation... Im sorry for your loss man...

Im not really an expert on android, but i would consider myself an advanced user so correct me if im wrong....
Couldnt it be, that the boot.img from the rom got corrupted somehow and thats the reason why it hanged while flashing it? Coz as of how i understood what the boot.img is used for, it would explain why u cant boot in recovery/dl-mode. Simply coz there is no bootloader on ur phone. Just an idea...
Sent from my GT-N7000 using xda premium

shrooms90 said:
Im not really an expert on android, but i would consider myself an advanced user so correct me if im wrong....
Couldnt it be, that the boot.img from the rom got corrupted somehow and thats the reason why it hanged while flashing it? Coz as of how i understood what the boot.img is used for, it would explain why u cant boot in recovery/dl-mode. Simply coz there is no bootloader on ur phone. Just an idea...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?

Worth a try
Sent from my GT-N7000 using xda premium

nokiamodeln91 said:
Worth a try
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
If they found out its my fault.. .will they charge or call me to fix it foor like.... 200 ~ 300 EU?

I have warned in hydracore thread that CWM 6.0.1.2 caused me and another user from a different thread to softbrick.
I got bashed by the fanatics in return.
Sorry to hear about your incident.

praetorius said:
I have warned in hydracore thread that CWM 6.0.1.2 caused me and another user from a different thread to softbrick.
I got bashed by the fanatics in return.
Sorry to hear about your incident.
Click to expand...
Click to collapse
LoL i should read that..... Im getting JTAGGED soon..

jeroen180 said:
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Click to expand...
Click to collapse
Looks like MIUI bug
Look hère : http://miuiandroid.com/community/index.php?threads/17408/
Envoyé depuis mon GT-N7000

@jeroen180 send it in, they wont notice, just tell them ur phone got slow sow u did a factory reset and now it refuses to boot send my sgs in that way, before the jig was know, and my gf sent her sgs plus in abot 2 weeks ago with the same story
Sent from my GT-N7000 using xda premium

Yeah, I agree, if you tell them you just had to do a factory reset because it got really slow and laggy than they shouldn't have a problem. They wouldn't bill you either unless they had prior authorization.

netopyr said:
Looks like MIUI bug
Look hère : http://miuiandroid.com/community/index.php?threads/17408/
Envoyé depuis mon GT-N7000
Click to expand...
Click to collapse
First off before you start quoting other threads in other fourms, take a minute to get your facts in order.. Miui for the note has not been released to the public as of this date because it has the possibility to brick you device as it has the unsafe Samsung kernel (yes the same kernel as your stock note ), so if your running Miui on your note than your running a leaked version (then in that case you should know the risk involved) that is either running the stock kernel or it has one of the hydracore versions as it is the only option miui has at the moment unless your on one of the cm versions. So not defending either the rom/kernel he was trying to flash or what he was coming from as he really doesn't state either .. it would help if he provided such information. Sorry to the owner but before you get your device JTAGGED you may want to check with a samasung service center because the JTAGGED will void your warranty..

jeroen180 said:
Well, im not a pro too to understand that since CWM erased bootloader and did not replaced it with the other version. How about SSC? Will they notice since my counter was not reset?
Click to expand...
Click to collapse
No ,CWM will not erase or even touch the bootloaders ,only PC ODIN can do that ,boot.img refers to the kernel ,I've had a corrupted boot.img flash once ,easily solved via PC ODIN ,the phone would start up and show the logo but nothing more if that happens .I doubt that's the case here but you could try a blind flash in PC odin and see if that works .

MR.change said:
No ,CWM will not erase or even touch the bootloaders ,only PC ODIN can do that ,boot.img refers to the kernel ,I've had a corrupted boot.img flash once ,easily solved via PC ODIN ,the phone would start up and show the logo but nothing more if that happens .I doubt that's the case here but you could try a blind flash in PC odin and see if that works .
Click to expand...
Click to collapse
How you explain the phone stays black screen after hanging in CWM with boot.img? U suggest my board broke by accident? Someone can explain?

Could it be,
that,,,, i forgot to reboot after flashing the Hydrakernel... and eMMC bricked the bootloader perhaps? since the bootloader is stored on the chip as well?

[Q] P1000 Brick

Sorry for the long thread but please read and help me !
Sorry moderators i tried looking for my post didnt find where you placed it. so making a new and clear where i'll tell what i ve done to my tablet.
firstly my p1000 was froyo 2.2 and i didnt checked that and tried to upgrade it to jelly bean, that was the first stupidity of my.
while doing that i faced many problems and concluded that it was brick.
how ever i had rooted my phone with super one click root..
later when it was bricked i again rooted it with cwm recovery by help of cmd.
then it was more complex, i then tried to roll it back and installed the firmware but the firmware i installed was wrong region again it went more complex.
then from some thread, i again used odin and pit it and installed some other firmware. that didnt work so i did something with heimdall suite as it was instructed and mess something with zImage thing.. all failed.
now i ve finally came up with no solution and thinking what the mess i ve done.
please help me.
now odin dont recognize the phone.
the phone is booting till the samsung welcome screen i can also listen the sound.
it also goes to cwm recovery screen and also goes to downloading screen.
please tell me a way so that it can go to normal i am happy with 2.2 froyo only.
tell me a way, please give me download links so that i dont mess it again.
remember odin not accepting it, i ve charged the phone fully and also installed the samsung usb drivers but its not helping..

Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app

yes, i am sure it is because of heimdall suite,..
thanks a lot you are so helping i will be posting here only now

Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS

AvRS said:
Your post was within another thread two from the top of this forum with you as the last poster but don't worry any more. As you've now created a new thread which is much clearer I've deleted the other posts so that all your questions and can answers on this subject can be kept together here.
Thanks
AvRS
Click to expand...
Click to collapse
i am really really sorry for all the inconvenience ,
i was a bit shocked as my tablet got bricked, so made such silly posts and created the problems.
but thanks for understanding my conditions.

priyana said:
Follow the link in my signature.
Download the guide and gb stock safe.
Jump to page 7.
Go to download mode. Connect cable. Start Odin.
You may want to remove zadig/heimdall if possible.
Better if you can get a clean PC and install driver from gb stock safe.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
i would like to give you a big big big thanks for helping me out..
this forum is the best forum over the web as i got my problem solved,
not only helped me to unbrick my tablet but also now its upgraded to 4.1 jelly beans.
Priyana without you my tablet would be ended with a hard brick.
Thanks a lot.

No network !!
after all the hard work and all flashing thing, i upgraded it to Android 4.1.1 Jelly Bean via CyanogenMod 10
but now the problem is i cant find the network ..

Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin

glussier said:
Are-you talking about wifi? If so, check this thread: http://forum.xda-developers.com/showthread.php?t=1874634&highlight=modem+bin
Click to expand...
Click to collapse
i am sorry for not being clear, i was talking about the mobile network.
i searched on forum, and what i understand is i have to copy modem.bin file to data/vendor.
but i dont know which modem file to copy.

You can extract modem.bin from the rom that you have downloaded.

uryv
glussier said:
You can extract modem.bin from the rom that you have downloaded.
Click to expand...
Click to collapse
i did that... but still not able to make any calls. my sim card is working on other phone though.
have tried flashing modem.bin and also tried copy and paste in vendor folder.
but its not working searching all over the forum but i dont know what to do

Settings>about tablet>Status> Service state : out of service / Mobile network state : disconnected / MDN : unknown

Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app

priyana said:
Where did you get the modem.bin from and which network you belong to.
I recommend starting by looking at gb stock safe, when you unpack there are a few modem.bin
Start with JPZ modem and stick it in /radio/ if latest cm10
Or to /system/vendor for slightly older one.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
in gb stock safe, it was jpz modem file.. which i used to flash and it was flashed very well and there was no problem in anything.
later on when i upgraded for 4.1.1 it was also installed normally with no problem the only problem i encountered is i cant make any calls from it.
even the imei number is changed of my phone.
i also sticked the file in system/vendor .. i tried with the both file the jpz which i had from gb stock file and another from the firmware.
well now i trying to go for the latest cyanogen 4.1.1 hope everything get normal in it, and try to stick file in radio.
can you tell me particularly which file to copy and where ?
in gb stock jpz worked fine.. should i go for it ?

yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.

priyana said:
yes the same jpz modem.bin file into /radio/modem.bin
the one in the CM10 might be corrupted, who knows.
Click to expand...
Click to collapse
hmm yea you were right.. and it was stupid of me i was using a old version cyanogen.. it downloaded the latest nightly and it worked fine..
but i think something google apps that.. the apps are limited as earlier i used to keep on scrolling and the apps list was like infinite now it seems as there are just 200 apps in it..
give me a link of latest gapps file plzz

Gapps only a few apps in it.
http://goo.im/gapps
Choose correctly, ics or jb.
Sent from my GT-P1000 using xda app-developers app