I wanted to update phone to jelly beand through pc companion and when it was on like 50% i get error message and phone turned off and now i cant turn it on again. There is no bootlogo and nothing volume+ and power not helping and repair with PCC and SEUS is not detecting phone. I get somthing like qhsusb_dload driver not found... I cant flash rom with flashtool...
So if u know what to do please tell me cuz i just bought phone yesterday...
volume up and power for long enough to get 3 vibrations? Try that
Secondly have you tried to get into flashmode?
Run flashtool, drag and drop a ftf into its open window, wait untill flashtool prompts you then attach in flashmode
tried both nothing works. i already sent phone and thy said that i need more than 50% battery and full operator signal to complete the update and i cant lose signal for 1 sec or update fail...
Leave the phone on wall charger for 24 hours and don't update OTA.
Try to put the battery out and put it back after 30 seconds or 1 minute.
s940068 said:
Try to put the battery out and put it back after 30 seconds or 1 minute.
Click to expand...
Click to collapse
On a T?
Sent from my LT30p using Tapatalk 2
mpiekp said:
On a T?
Sent from my LT30p using Tapatalk 2
Click to expand...
Click to collapse
YES
I would send it back if you still have warranty rather than open the case
Sent from my LT30p using Tapatalk 2
s940068 said:
YES
Click to expand...
Click to collapse
erm , NO
merseyman said:
erm , NO
Click to expand...
Click to collapse
Erm YES if you use
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:laugh:
Nidzo80 said:
Erm YES if you use
:laugh:
Click to expand...
Click to collapse
Good idea, might affect warranty though :laugh:
Related
Hi I've got 2 questions.
1. I've for some time had an unlocked bootloader on my Z and I've installed another ROM, PAC man, but now when I plugged in my device to Sony PC Companion I get a message that I've got an new firmware available, shouldn't PCC recognized the phone as unrecognizable?
Sorry that it's in swedish but translated it stands: An update of the phone's/tablets firware is available
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A new version of the phone's/tablet's firmware is available
(10.1.1.A.1.253)
Bla bla bla
Click Update to start the updateguide.
2. I was wondering if there are any problem to install/update to .253 using PCC when on unlocked bootloader and another ROM? If I ever want to restore, could I use this instead of my .ftf if I want to factory reset it too, as an alternative to Flashtool?
Thanks
//TheHawk002
My experience is that PCC says there is an update for my device, which of course there is, but it wont update when I tried with unlocked bootloader .
DevShaft said:
My experience is that PCC says there is an update for my device, which of course there is, but it wont update when I tried with unlocked bootloader .
Click to expand...
Click to collapse
Ah okey thanks, so it refuses to install when pressing update?
Sent from my C6603 using Tapatalk 2
TheHawk002 said:
Ah okey thanks, so it refuses to install when pressing update?
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
That was my experience a while back, but hey why dont you try to confirm .
DevShaft said:
That was my experience a while back, but hey why dont you try to confirm .
Click to expand...
Click to collapse
I'll try tomorrow just wanted to check that it doesn't do anything evil first
Sent from my C6603 using Tapatalk 2
TheHawk002 said:
I'll try tomorrow just wanted to check that it doesn't do anything evil first
Click to expand...
Click to collapse
Let me know when it does . No really you will be fine.
You will have a message:your phone has a modified software and the update will not carry on.
You can go back to stock by using emma,it's only for unlocked bootloader or of course with flashtool.
To use pcc or sus update's capabilities you will have to flash a stock rom and relock the bootloader with flashtool(no need for TA).
Sent from my C6603 using xda premium
Yepp after downloading all files, then when I put the phone in flash mode it told me that the firmware were modified but I did at least get an ftf from it ( @DevShaft )
Sent from my C6603 using Tapatalk 2
My Motorola XT-890 doenst charge anymore, i never changed his rom for a custom one, nor tried to put other versions of android or else. First i tried this but my pc doenst see the medfield... actually only if right click computer->manage->device manage
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
so when i run the .bat he cannot find the device. I dont know what to do now.
ps: sorry for my bad english, i'm from brazil
Thanks for the help
Furinha-C said:
My Motorola XT-890 doenst charge anymore, i never changed his rom for a custom one, nor tried to put other versions of android or else. First i tried this but my pc doenst see the medfield... actually only if right click computer->manage->device manage
so when i run the .bat he cannot find the device. I dont know what to do now.
ps: sorry for my bad english, i'm from brazil
Thanks for the help
Click to expand...
Click to collapse
The picture indicates that the windows drivers aren't installed correctly.
If the device doesn't charge at ac charger it could be damaged.
Verstuurd van mijn GT-P5110
Hazou said:
The picture indicates that the windows drivers aren't installed correctly.
If the device doesn't charge at ac charger it could be damaged.
Verstuurd van mijn GT-P5110
Click to expand...
Click to collapse
so, is there anything i can do?
Furinha-C said:
so, is there anything i can do?
Click to expand...
Click to collapse
Test in another PC with W7.
KREAT0R said:
Test in another PC with W7.
Click to expand...
Click to collapse
i did it right now, now the computer recognizes my xt890, when i try to use the RSD Light 6.1.5 he says to manually get into the fastboot mode
... what do i do now? anyone knows? couse i cant get in the fastboot mode manually, and the screen doesnt turn on, only shows the green led
Have same problem here, my Windows 8 do not recognize XT890 only as medfield but no at unbrick.bat file.
My screen is black and with green led on, already tryit to charge or do something but nothing happens and cant go to fastboot.
"Invalid Flash Memory" While Using SP flashtool on Infinix Hot 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't knw why I got this error in sp flashtool, but I can't boot my phone anymore, its totally dead, I have all the stockroms, but none seems to work for it. What can I do pls ? @Nonta72 [email protected]
Merlve said:
I don't knw why I got this error in sp flashtool, but I can't boot my phone anymore, its totally dead, I have all the stockroms, but none seems to work for it. What can I do pls ? @Nonta72 [email protected]
Click to expand...
Click to collapse
Format the whole memory then try again.
Nonta72 said:
Format the whole memory then try again.
Click to expand...
Click to collapse
I did that, but not with the bootloader tho? What do u suggest?
Merlve said:
I did that, but not with the bootloader tho? What do u suggest?
Click to expand...
Click to collapse
Wipe bootloader too.
Nonta72 said:
Wipe bootloader too.
Click to expand...
Click to collapse
I just tried that, and I still got the same exact error, geez, is my phone unfixable?
Merlve said:
I just tried that, and I still got the same exact error, geez, is my phone unfixable?
Click to expand...
Click to collapse
Maybe your MMC is corrupted or fried.
If it's just corrupted, you can open the phone up and manually disconnect and reconnect the MMC. Unfortunately I don't know how to do that.
If it's fried; I'm sorry, but you'll need a new motherboard (or a new phone).
In the meantime, you can keep digging on google with the error code you code in SPFT. Might eventually come up with something.
Nonta72 said:
Maybe your MMC is corrupted or fried.
If it's just corrupted, you can open it up and manually disconnect and reconnect the MMC. Unfortunately I don't know how to do that.
If it's fried; I'm sorry, but you'll a new motherboard (or a new phone).
In the meantime, you can keep digging on google with the error code you code in SPFT. Might eventually come up with something.
Click to expand...
Click to collapse
OK, thanks for the help. I really appreciate.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can somebody help me on how to remove this "R" logo because it's bugging me. It appeared when i rebooted my phone for the first time (one day after i bought the phone) then after i reboot i can't open apps because it said " wait until device is fully rebooted" then i waited for 5 mins but still I can't open apps then i restarted the phone then after that i can the open apps but the logo is still there. I also done a factory reset but the logo is still there, do you guys know how to fix this?
Aquilla2312 said:
View attachment 5351881Can somebody help me on how to remove this "R" logo because it's bugging me. It appeared when i rebooted my phone for the first time (one day after i bought the phone) then after i reboot i can't open apps because it said " wait until device is fully rebooted" then i waited for 5 mins but still I can't open apps then i restarted the phone then after that i can the open apps but the logo is still there. I also done a factory reset but the logo is still there, do you guys know how to fix this?
Click to expand...
Click to collapse
I think it's the roaming icon. Just check whether you've turned on roaming.
pittrich said:
I think it's the roaming icon. Just check whether you've turned on roaming.
Click to expand...
Click to collapse
I don't think so because its already off
Aquilla2312 said:
I don't think so because its already off
Click to expand...
Click to collapse
Also it only appeared when i rebooted my phone and now its always there
Think also it's Roaming, maybe have you double SIM ?
Answer from 2 years ago. Read also the replies for explanations.
https://www.reddit.com/r/Xiaomi/comments/90w60r
pl1992aw said:
Answer from 2 years ago. Read also the replies for explanations.
https://www.reddit.com/r/Xiaomi/comments/90w60r
View attachment 5352281ohhh thank you
Click to expand...
Click to collapse
Hello, i have a galaxy a40, first unlocked BL, then tried to flash TWRP via ODIN in DL mode, and now the phone is lock on "downloading screen" even if I restart.... (not possible de power off...)
Any one would have a solution please ?
Thanks
Read, it is official
https://www.samsung.com/us/support/troubleshooting/TSG01212623/
@Samarimama I have edited your post to point to the article you searched. Please don't post long links.
@bilatche What happens if you hold down the Power button for at least 10 seconds?
Samarimama said:
Read, it is official
https://www.samsung.com/us/support/troubleshooting/TSG01212623/
Click to expand...
Click to collapse
thanks, but doesn't seem to be a case/buttons issue....
V0latyle said:
@bilatche What happens if you hold down the Power button for at least 10 seconds?
Click to expand...
Click to collapse
absolutely nothing.... I have tried to recharge the phone, but still booting on DL screen....
The only solution I see : go back on last stock firmware via odin.
I will try this week.
bilatche said:
absolutely nothing.... I have tried to recharge the phone, but still booting on DL screen....
The only solution I see : go back on last stock firmware via odin.
I will try this week.
Click to expand...
Click to collapse
If you're unable to reboot the phone, this won't help you. Have you tried holding down the power button until the phone does something?
nothing with long press on power....
here is the screen appearing 1 second at boot before being stuck on DL screen:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I will see if reinstall stock rom fixes the DL issue...
maybe it's an error due that I didn't have flashed vbmeta after twrp ?
bilatche said:
nothing with long press on power....
here is the screen appearing 1 second at boot before being stuck on DL screen:
View attachment 5926205
Click to expand...
Click to collapse
You don't have the official firmware, you need to flash the official.