Related
New enhancements in Android 4.2.2 update
- Android 4.2.2 – Build ID: JDQ39
- New S4 Lockscreen: Multiple Widgets, two Unlock effects (Ripple and Light), improved ripple effect than Android 4.1.2, ability to change clock size and set a personal message
- New Screen modes (From S4): Adapt Display and Professional Photo
- Daydream
- Driving mode
- Actionable notifications
- New Additions in Notification Center
- Completely revamped Settings UI (Tabbed interface – Exactly like the S4)
- Addition of Voice controls (Let’s you control various parts of the phone using voice commands – Galaxy S4 feature)
- Gallery modes have white background (When changing gallery modes to 3D the background changes to white)
- Full screen Samsung apps
- New S-Voice (from S4)
- New smart switch widget
- Found more? Tell us about them in the comments below!
WARNINGS
- This firmware will increase your binary counter but the current binary and system status will remain official.
- We have re-packaged this firmware from dump files.
- There is no modem in this firmware, so the Modem you will be using before flashing this firmware will remain the same.
- This is a pre-release firmware and not official from Samsung.
- We have fully tested this firmware and this firmware works perfectly as any other official firmware.
Firmware Details
Android Version: 4.2.2 – JDQ39 (Jelly Bean)
PDA: I9300XXUFME3
CSC: I9300OJKFME1
MODEM: N/A
Region: Middle East
Carrier: Branded
Changelist: 611730
Build Date: 8 May 2013
Download: I9300XXUFME3_I9300OJKFME1_ILO.zip
Flashing Instructions
- Unzip the file
- Open Odin 3.04 (already included in the firmware package)
- Restart phone in download mode (Press and hold Home + Power + Volume down buttons)
- Connect phone and wait until you get a blue sign in Odin
- Add I9300XXUFME3_I9300OJKFME1_HOME.tar.md5 to PDA
- Make sure re-partition is NOT ticked
- Start flash, sit back and wait a few minutes.
- If you encounter any issues with the firmware (Any FC, Bootloop etc)
- Boot into recovery mode (Home+power+vol up)
- Choose to wipe/factory reset. (THIS WILL ERASE ALL OF YOUR DATA INCLUDING YOUR INTERNAL SD CARD!)
- Then choose reboot and you should be good to go!
http://hotfile.com/dl/223564134/4017cbe/I9300XXUFME3_I9300OJKFME1_ILO.zip.html
link:
http://www.sammobile.com/2013/05/20...ly-bean-leaked-firmware-for-the-galaxy-s-iii/
there is already a thread http://forum.xda-developers.com/showthread.php?t=1835931
You just copied the text Faryaab posted and pasted it into the Android Development. Very good, not.
its straight off the Sammobile site
wesjeex3 said:
You just copied the text Faryaab posted and pasted it into the Android Development. Very good, not.
Click to expand...
Click to collapse
the copy of the page SamMobile not of any user, just wanted to give you the news but I see how you thank you
alvaro_lsrs said:
the copy of the page SamMobile not of any user, just wanted to give you the news but I see how you thank you
Click to expand...
Click to collapse
Uh... I'm not really sure what you meant but Faryaab is an Admin of Sammobile and he's also the one that made that article on the website of Sammobile.
No point of making a separate thread really since majority of the inquiries will be posted on the thread of Faryaab.
SignetSphere said:
Uh... I'm not really sure what you meant but Faryaab is an Admin of Sammobile and he's also the one that made that article on the website of Sammobile.
No point of making a separate thread really since majority of the inquiries will be posted on the thread of Faryaab.
Click to expand...
Click to collapse
This ^
Root please
LOLLIPOP IS OUT FOR THE SM-T800 10.5 WI-FI
Firmware is on Sammobile
FRANCE PDA T800XXU1 BOCC
CSC T800XXU1 BOC4
LOLLIPOP VERSION 5.0.2
Got to wait for SM-T805 now then.
its here : http://forum.xda-developers.com/galaxy-tab-s/general/samsung-lollipop-range-tab-s-t3021612
5.0.2 Changes
Installed with Odin 1.85 The initial boot time is longer than Kitkat but when it does boot there is a pleasant surprise...No more blue theme, settings is in white with a light blue top bar. The only icon change is Internet it is now a light shade of purple, and the web ex icon has changed. Performance seems to be improved no lag anymore with magazine UX. The launcher has a new section when screen is long pressed - Home Screen Settings, but the only thing there is content home screen dialog concerning view news and social media and open apps in one place.
Apart from these minor changes that is it. I pressume the rest is under the hood improvements. By the way I don't know if this is relevant or not but I had rooted previously, so my knox counter was 0x1 but there was no problem upgrading to 5.0.2.
Hope this helps.......
Just Noticed on Notification Panel Multi User, but the volume control is gone, only the brightness control remains.
does it work with all t800 models or will it lock my bootloader
mac-devil said:
does it work with all t800 models or will it lock my bootloader
Click to expand...
Click to collapse
Sorry I can not answer that question, All I know is I live in Luxembourg so my kit kat was LUX, But because my know was tripped I did not really care where the rom was from, it is only the WiFi model so I do not have to worry about modems for GSM. One thing I did notice though was a new section under About device underneath the section for SE for Android. This is what it says:
Knox Version...Standard SDK 5.30 .. Knox Version 2.3... Premium SDK 2.30... Customization SDK 2.40.... Container 2.30... CEP 2.0.1.... Enterprise Billing 1.10.... SE for Android 2.3.0.... SSO 2.1.1...... TIMA 3.0 and VPN 2.20.
I have not seen this on any of my tablets before ....it would seem Samsung has beefed up Knox and security.
I installed 5.0.2 and I am happy with it but my main tablet is my note 12.2 pro which is my daily driver so I am not so bothered if my T800 stays on this French version it will probably be no different than the LUX version but I would have to wait an eternity for the update....I do not think Samsung knows where Luxembourg is, my Galaxy tab 7.7 is still on custom rom JB 4.1.2. But the official firmware is honeycomb 3.2 for Luxembourg !!!!!!!!!!!!!!!
If I was you I would wait from some other people's feed back if you are unsure, I only started this post to let people know the update was out and to give some info... I use root and customise all my tablets and phones but when it comes to Knox and bootloaders I am not a specialist, and I cannot for sure tell you what the outcome may be.....as I said this new Knox section is new and complicated it may well be that the roms may be region locked or specific once they are flashed, I will find out in the future if
or when I try to flash from another region. Sorry for the long winded post but I just want to give you and others as much Info as possible.........Hope this helps.
P.S A few other things the changelist is 4403645, and the bootloader is T800XXU1BOCC.
Wow! Getting it OTA right now!
Hope it goes smoooooth!
Can we flash this on the t805 if we are not using cellular functions?
scoopdreams said:
Can we flash this on the t805 if we are not using cellular functions?
Click to expand...
Click to collapse
Why do you think Samsung releases updates for each model?
So: the answer is NO
henklbr said:
Why do you think Samsung releases updates for each model?
So: the answer is NO
Click to expand...
Click to collapse
Lol was just hoping. Thanks!
scoopdreams said:
Can we flash this on the t805 if we are not using cellular functions?
Click to expand...
Click to collapse
Just wait for a few day
Better to use Kies or just take the OTA? I have the OTA ready to go but just wondered...damn n00b
thread closed
Please use this thread
Hey guys, I wanna flash the SliMM-Rom but I need the http://www.hanfei.name/what-is-customization-number-or-cda-for-sony-xperia-device-and-how-to-view-or-find-it.html the provider Customization Number to use VoLTE.
Is it possible to flash with the flashtool from the Provider-Rom only a specific part of the Rom over the exciting Rom to get there customization number?
I believe not.
Believe or know ?
@The sGS5 custom-stock-roms is it possible to change the buil.prop
to install the prefered CSC, this is the same like the customization numbers @ the z3c
[ROM][OFFICIAL][SE][O][8.0.0][RD3][SM-G9350]Aurora V32.0, S9 Features
To all devs: You're not allowed to take files of the ROM without my permissions
WARNING I DO NOT OWN THE DEVICE - IF YOU HAVE ANY ISSUE PLEASE PROVIDE LOGS
Thread Under Construction
Join AURORA Telegram Group
ROM Information
-Based on G9350ZCU2CRD3
-Rooted / Deodexed / Zipaligned / Busybox / Deknoxed
-Multilingual
-Gesture from the four edges of the screen to the center of the multi-finger sliding gesture custom function (support the number of custom fingers, the default for the three-finger lock screen).
-AROMA
ROM Features
-Applock
-Floating Messages
-Application Manager
-Aurora Settings
-S9 Features
S9 lock screen effects and wallpapers.
S9 camera stickers.
S9 SMS.
S9 ringtones and sound effects.
Aurora Settings
Status Bar:
-Support for custom display or hide the Clock icon.
-Support for custom display or hide the Bluetooth icon.
-Support for custom top left corner of the virtual switch and virtual keys you can press and short press function key custom.
-Support for custom virtual switches and virtual key intermediate can long press and short press function key custom.
-Support for custom top right corner of the virtual switch and virtual keys you can press and short press function key custom.
-Support for custom switching speed display.
-Support for custom switching day display.
-Drop-down calendar display.
-Support for custom style four kinds of batteries, hide battery, battery native, native + battery indicator, a third-party battery indicator (dozens of style choice is yours).
-Add Linear Battery display (can be custom colors, custom height support charging animation switch).
-Increases the status bar is not connected to the network data also show that the default display type switch (characteristic line countries such as 4G, H, etc.).
-Added partial support automatic status bar perfect immersive display.
Call SMS:
-Add to dialpad home operator display (no official carrier).
-Call attribution to add Interface operator display.
-Add call records to show ownership.
-Add SMS attribution, support service number is displayed.
Support for custom come and call recording switch.
-Come and call recording automatically distinguish between incoming calls or outgoing calls.
-Support call end delay setting screen.
-Adding lightning flash function (independent switch supports different profiles, support flash frequency setting).
-Increase network lock (3G, 2G and telecommunications 3G, 2G), Aurora first exclusive features!
Setting Aurora (Aurora Advanced Settings menu, you enter exempt engineering order):
-Support to quickly open the APN setting function.
-Quickly open the phone supports USB mode setting function.
-Open the phone software version supports fast viewing.
-Support to quickly open the battery information proofreading function.
-Support to quickly open hardware information detection.
-Support Quick View IMEI.
-Quick View CPU support information.
Bugs
-NONE
Installation Steps
-Flash Update Modem and Bootloader via odin (recommended)
- Full Wipe (System, Data, Davik Cache, Cache)
- Install / Flash ROM
- Reboot and enjoy (first bootup will take a while, so grab a cup of coffee)
Supported devices
G9350 ONLY FOR NOW
Thanks to:
Team Aurora
@Ale95 for help always there..
@Martlliero thanks to him my teacher
@Ale95 XDA Team
@Azar_98 for help
@skejcik for contributing in aurora settings
@Sac23
@JasonRR
@thereassaad
tuyie for testing
@Tkkg1994 for modem and bootloaders
@Repulsa big thanks bro
@edzamber
@Androidwizzard
@DaOldMan Thanks mate always there to help
My mate Welly for uploads
Devs from Samviet for various files and fixes
My users you derserve a big thanks too
All my S4 Fellows who encouraged me..
@hilarytrump for testing
PM If I forgot any one
DOWNLOAD
VERSION 32
XDA:DevDB Information
AURORA ROM OREO SNAP, ROM for the Samsung Galaxy S7 Edge
Contributors
Ouweshs28, hilary trump , Team Aurora & Friends
Source Code: http://bbs.gfan.net.cn/forum.php?mod=viewthread&tid=9294382
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP/ OREO BOOTLOADER/ MODEM
Based On: Samsung Experience 9.0
Version Information
Status: Stable
Current Stable Version: V32.0
Stable Release Date: 2018-05-13
Created 2018-05-13
Last Updated 2018-05-13
Reserved
Reserved
Thanks to @hilary trump for the update
It's going to be his last one
I will try to update it in my free time
Let's wish him all the best for his new job
Thank you for your support
Ouweshs28 said:
Thanks to @hilary trump for the update
It's going to be his last one
I will try to update it in my free time
Let's wish him all the best for his new job
Thank you for your support
Click to expand...
Click to collapse
See you guys next year.
I am a seafarer, you know there is no strong internet on board at sea. I must stop my rom working when boarding the ship :crying: Thank you guys for your support
Bootloop when updating from NORMA S9+ port V3
Joel Tejena said:
Bootloop when updating from NORMA S9+ port V3
Click to expand...
Click to collapse
Brush latest official nougat BL, CP via odin:
BL: https://www.androidfilehost.com/?fid=818070582850509258
CP: https://www.androidfilehost.com/?fid=818222786056030371
Flash rom again, choose "delete user data"
Please upload CP file again. You upload BL file two times. Thanks
hilary trump said:
Brush latest official nougat BL, CP via odin:
BL: https://www.androidfilehost.com/?fid=818070582850509258
CP: https://www.androidfilehost.com/?fid=818070582850509258
Flash rom again, choose "delete user data"
Click to expand...
Click to collapse
Hi @hilary trump,
The link for CP is wrong and leads to the BL.
panpetar said:
Please upload CP file again. You upload BL file two times. Thanks
Click to expand...
Click to collapse
skrilin5 said:
Hi @hilary trump,
The link for CP is wrong and leads to the BL.
Click to expand...
Click to collapse
Thanks. Edited
hilary trump said:
See you guys next year.
I am a seafarer, you know there is no strong internet on board at sea. I must stop my rom working when boarding the ship :crying: Thank you guys for your support
Click to expand...
Click to collapse
Thanks for all you did for the community. All the best! :highfive:
Installation steps for update from Aurora v28 Android 7.0
Hey guys could anyone please help with install steps for and update from previous ROM version Aurora v28 Android 7.0
Should I follow Nougat steps from [ROM][8.0][G9350] NORMA S9+ port V3 22/APR https://forum.xda-developers.com/s7...els-recoveries--other-development/v2-t3778193 ?
1. Back up all your external memory data. It will be erased
2. Download the latest official Nougat G9350ZCU2CRC3 to your PC and extract this zip file
https://www.androidfilehost.com/?fid=818070582850507054
FLASH BL, AP, CP, CSC with Odin3 v3.12.3
3. Let's system boot fully
4. Flash this ROM via TWRP
Am I right?
zera671 said:
Hey guys could anyone please help with install steps for and update from previous ROM version Aurora v28 Android 7.0
Should I follow Nougat steps from [ROM][8.0][G9350] NORMA S9+ port V3 22/APR https://forum.xda-developers.com/s7...els-recoveries--other-development/v2-t3778193 ?
1. Back up all your external memory data. It will be erased
2. Download the latest official Nougat G9350ZCU2CRC3 to your PC and extract this zip file
https://www.androidfilehost.com/?fid=818070582850507054
FLASH BL, AP, CP, CSC with Odin3 v3.12.3
3. Let's system boot fully
4. Flash this ROM via TWRP
Am I right?
Click to expand...
Click to collapse
I came from Norma Fan Edition Nougat.
I did:
- Flashed BL and CP using Odin
- Reboot in recovery and Wiped System, Data, Davik Cache, Cache
- Still in recovery, flash ROM
- Clean Install (i did not try dirty flash)
- Reboot
It is working very well.
Thanks again to all dev and people working on that ROM :highfive:
plssss sm-g9300
Little feedback compared to Norma fan edition Nougat:
Good:
- UI and security updated which is a good thing
- OREO and new touchwiz functions
- Battery management still very good
Less good:
- the overall experience is slower than before
- getting out of deep sleep is laggy
skrilin5 said:
Little feedback compared to Norma fan edition Nougat:
Good:
- UI and security updated which is a good thing
- OREO and new touchwiz functions
- Battery management still very good
Less good:
- the overall experience is slower than before
- getting out of deep sleep is laggy
Click to expand...
Click to collapse
does this update still have not receiving any background notification when screen is turned off issue?
manishiano said:
does this update still have not receiving any background notification when screen is turned off issue?
Click to expand...
Click to collapse
This issue is common, especially when when dirty flash or use titanium backup to restore apps. Nothing related to the rom itself.
You need applications to auto run. Go to:
- Smart Manager (samsung app)
- on the bottom, swipe left
- click on Auto run App
- select the apps you think can't have background notification
Guys could anyone please help on how to properly install Magisk Root for this ROM?
I tried default Magisk guide which involves root uninstall through SuperSU application with restoring default bootloader and not restoring recovery.
After this I install Magisk Manager, it updates itself than asks to download a zip file and flash it via recovery which i did. After reboot I successfully got root it works, but when my phone reboots it says
red font caps "kernel is not seandroid enforcing" in top left corner and i have noticed that my device performance overall dropped noticeably even when sliding through desktop and all application list in touchwiz
UPD reflashed this ROM in dirty Mode, performance is back to normal. kernel error is gone. SuperSU is back. Tried unuinstalling it without restoring bootloader. Now Magisk won't flash, says my boot loader is modified. previous version of this ROM had Magisk i think. So anyway to properly install Magisk here?
Can you make one for scv33 same processor?
Please we Japanese user wants rom too its is unlocked bootloader.
Hello. This ROM could work on the S7 SMG935F variant? Pleas somebody can help me?
This ROM is based on Samsung Note 9 TGY firmware and modded to allow full US carrier functions (volte, wifi-calling, etc.), but can be installed on any Snapdragon SM-G9600 or SM-G9650 that meets the requirements below.
Flash at your own risk! I am not responsible for any dead device, loss of data, etc.
Now to the fun stuff!
Requirements:
Must be on Android 10 firmware. I recommend that you be on 7FTK2 bootloader
Must have klabit's official TWRP 3.4.0-0 G9600 G9650 installed
Instructions:
Make a full TWRP backup!!
Download ROM to phone from link below
Download ODM to phone from link below ONLY if you're on a USA carrier
Reboot to TWRP, select wipe and swipe to factory reset
Install ODM if you're on a USA carrier
Install ROM
Reboot
After setup, open rom control, open each tab in rom control and reboot SystemUI
*For SafetyNet to pass, you need to enable Magisk hide in Magisk manager settings
Downloads:
S9 ROM Krog_G9600_NoteRom_5FTK1_V8.zip or Gdrive link
S9+ ROM Krog_G9650_NoteRom_5FTK1_V8.zip or Gdrive link
ODM Krog_G9600_G9650_USA_ODM_Q.zip (For U.S. carriers only!!)
Spoiler: Click to view changelogs
V8 Changelog:
Updated base to OneUI 2.5
Updated to November 1, 2020 security patch
Updated to klabit v6.5 kernel
Updated Magisk to v21.1
Added options to select the number of toggles to be shown in the single line quick settings panel
Boot and shutdown animations
Other enhancements
V7 Changelog:
Updated to 5ETI1 September 1, 2020 security patch
Lockscreen display timeout options
Option for quick reply from secure lockscreen
Option to automatically expand all single notifications in notification panel
Option to disable display wakeup when USB is connected or disconnected
Option to remove persistent notifications
Show/hide stock battery in status bar
Show/hide stock battery in quick settings panel
Other minor enhancements
Discontinued lite version
V6 Changelog:
Updated to 5ETH3 August, 1 2020 security patch
Added back advanced power menu, but with stock style icons
Added switches to show or hide all items in the power menu except power off
Removed all reboot confirmations
Removed Spen features/apps
V5 Changelog:
Updated to OneUI 2.1
Updated to 5ETG3 July, 1 2020 security patch
Updated to klabit's 6.3 kernel
Unlocked netspeed view in status bar for all carriers with a switch in rom control
Stock or large size of netspeed in status bar
Custom mobile signal icon choices in status bar
Custom wifi signal choices in status bar
Show/hide wifi arrows in status bar
Custom alarm icon choices in status bar
Custom location icon choices in status bar
Custom bluetooth icon choices in status bar
Adjust navbar height in rom control
Matrix animation in notification panel background
Color clock in notification panel
Color date in notification panel
Color search icon in the notification panel
Color power icon in the notification panel
Color settings icon in the notification panel
Color 3 dot icons in the notification panel
Color media text in notification panel
Color media icon in notification panel
Color devices text in notification panel
Color devices icon in notification panel
Removed advanced reboot options in the power menu (I might add these back eventually)
Removed custom toast animations
V3 Changelog:
All previous versions features plus:
Minor bug fixes
Option to use stock clock in the status bar
Option to hide the clock in the status bar
Option to use a custom center clock in the status bar with many options
Kept option to use 3Minit clock in the status bar
Left or right position of network speed in status bar (network speed indicator must be enabled in your CSC like I have done for U.S. carriers)
Added mobile data usage option in the notification panel
Change position of mobile data usage in the notification panel
Text color options for mobile data usage in the notification panel
Added an option to show or hide ram bar in the notification panel
Color and font options for the ram bar in the notification panel
V2 Changelog:
All V1 features plus:
Updated to 4DTD5
Fully deodexed
3Minit clock mod
2 sim plus sd card mod unlocked
V1 Features:
klabit kernel V6.1
US carrier support
Call recording for US carriers
Native caller ID and spam protection for US carriers
Wifi calling for US carriers
Unlocked mobile hotspot for all carriers
Fixed loss of bluetooth pairs after reboot
Fixed Samsung health
Theme store unlocked
Added over 1k fonts
Signature verification removed
3Minit battery option in status bar
Status bar background color/gradient choices
Battery bar option in status bar
Advanced power menu with switches
Power menu color/gradient/image/matrix choices
Power menu text color choices
Power menu reboot confirmations removed
Navigation bar background color/gradient/image choices
Navigation bar gifs
Battery bar option in navigation bar
3Minit battery option for navigation bar
Custom toast animations
Blur in notification panel background with switch
Magisk 20.4
If you like my work, please take the time to hit the thanks button. It will encourage me to continue development.
Join this group for telegram support
https://t.me/joinchat/CG3OjhzSjJhhHLMu2vTmzg
Contributors:
@Krog18
@stang5litre
@klabit87
@jrkruse
Thanks to:
@biikman
@fz798
@TheMadScientist
@tylerhole
Source code:
Rom Control
Current Status:
SM-G9600=Stable
SM-G9650=Stable
Created: 2020-05-17
Last Updated: 2020-12-15
Reserved
Krog18 said:
Mine
Click to expand...
Click to collapse
Nice job
Sent from some device I modified
As always nice job mate
Krog18 said:
I also have this rom built for the SM-G9600, but I have no way to test it. If someone is willing to try it out and give feedback, I'd appreciate it. Just follow the same instructions as in post #1, but use Krog_G9600_4DTD5_NoteRom_V2 as the rom zip. Please get a recovery log just in case it doesn't boot so I can check it out. Also, please be specific in your feedback as to which rom you are referring to.
Click to expand...
Click to collapse
Thanks for your great work, I got bootloop when flashing your rom, please support for model g9608, thanks you verry much:good:
bjnmonkey77 said:
Thanks for your great work, I got bootloop when flashing your rom, please support for model g9608, thanks you verry much:good:
Click to expand...
Click to collapse
The system probably would work it’s probably the boot img causing bootlooping. What do you use to root your stock firmware?
Sent from some device I modified
I have the s9 plus with android 10 with root and recovery, I make a backup and try the rom, I hope and not bootlop, I comment that such was, great contribution to the s9 plus THANK YOU
jrkruse said:
The system probably would work it’s probably the boot img causing bootlooping. What do you use to root your stock firmware?
Sent from some device I modified
Click to expand...
Click to collapse
I used the author's klabit87 g9600 kernel for model g9608 to root stock firmware, can you solve this problem for me? thank you :
bjnmonkey77 said:
I used the author's klabit87 g9600 kernel for model g9608 to root stock firmware, can you solve this problem for me? thank you :
Click to expand...
Click to collapse
Try something for me if you wouldn't mind. Wipe and flash the rom then restore a backup of your stock rooted boot.img then flash klabits g9600 6.1 kernel zip and see if that boots. Please follow the steps in that exact order.
Sent from my SM-N9600 using Tapatalk
bjnmonkey77 said:
I used the author's klabit87 g9600 kernel for model g9608 to root stock firmware, can you solve this problem for me? thank you :
Click to expand...
Click to collapse
You are on android 10 firmware correct?
Sent from some device I modified
Krog18 said:
Try something for me if you wouldn't mind. Wipe and flash the rom then restore a backup of your stock rooted boot.img then flash klabits g9600 6.1 kernel zip and see if that boots. Please follow the steps in that exact order.
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
I will try it right now, thank you
jrkruse said:
You are on android 10 firmware correct?
Sent from some device I modified
Click to expand...
Click to collapse
yes ,i'm using stock firmware android 10
bjnmonkey77 said:
I will try it right now, thank you
Click to expand...
Click to collapse
Try this when you get a chance. Wipe then flash this rom zip
https://drive.google.com/file/d/1yL-805jxI5pUiBSxtPx_8jOsDzME3Oxt/view?usp=drivesdk
Thanks for testing the G9600 rom. I have the G9650 so it's a challenge to make sure everything is stable for a device I don't have.
Sent from my SM-N9600 using Tapatalk
Krog18 said:
Try this when you get a chance. Wipe then flash this rom zip
https://drive.google.com/file/d/1yL-805jxI5pUiBSxtPx_8jOsDzME3Oxt/view?usp=drivesdk
Thanks for testing the G9600 rom. I have the G9650 so it's a challenge to make sure everything is stable for a device I don't have.
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
Hello, first thank you for your help, I flashed the zip file you sent but still hangs on the samsung logo, maybe my device model g9608 doesn't fit this ROM or you have any fix for this, thanks you verry much :fingers-crossed:
bjnmonkey77 said:
Hello, first thank you for your help, I flashed the zip file you sent but still hangs on the samsung logo, maybe my device model g9608 doesn't fit this ROM or you have any fix for this, thanks you verry much :fingers-crossed:
Click to expand...
Click to collapse
Here's another attempt for your G9608. Wipe and flash
https://drive.google.com/file/d/1ZGdKCSYvSQwC4zkN1z_vIr1EQJlgixr1/view?usp=drivesdk
After you flash, but before you reboot, go to advanced then copy log and upload the log please. I'd like to look at it.
Sent from my SM-N9600 using Tapatalk
For anyone who prefers stock status bar clock and battery over 3minit, flash this zip
https://androidfilehost.com/c/lame
Sent from my SM-N9600 using Tapatalk
Krog18 said:
Here's another attempt for your G9608. Wipe and flash
https://drive.google.com/file/d/1ZGdKCSYvSQwC4zkN1z_vIr1EQJlgixr1/view?usp=drivesdk
After you flash, but before you reboot, go to advanced then copy log and upload the log please. I'd like to look at it.
Sent from my SM-N9600 using Tapatalk
Click to expand...
Click to collapse
thanks for the great work,I got the error "wallpaper services keeps stopping" and "Camera stoping" "SmartManager Stoping"........, any solution to fix it .
edit: things were so bad, after flashing rom again my device bootloop samsung logo :crying:
bjnmonkey77 said:
thanks for the great work, everything works fine, but I got the error "wallpaper services keeps stopping", any solution to fix it :good:
Click to expand...
Click to collapse
Need to take a log. It can be any number of reasons
TheMadScientist said:
Need to take a log. It can be any number of reasons
Click to expand...
Click to collapse
Yes, I edited it
bjnmonkey77 said:
thanks for the great work,I got the error "wallpaper services keeps stopping" and "Camera stoping" "SmartManager Stoping"........, any solution to fix it .
edit: things were so bad, after flashing rom again my device bootloop samsung logo :crying:
Click to expand...
Click to collapse
Did you wipe data?
Sent from some device I modified
jrkruse said:
Did you wipe data?
Sent from some device I modified
Click to expand...
Click to collapse
yes, I have wipe data, then perform 4 wipe (davik, davik cache, data, system) then flash the zip file
but the problem here is that my original odm folder didn't change after flashing the zip file, I think it was the cause of the above errors.