Hey Guys.
So I updated my 4X to official 4.1.2 and everything was smooth, I didn't have any problems. Today I rooted my device and again everything was OK. I wanted to install this tweak so i downloaded Root Explorer Lite and checked if it works by trying to edit comment in build.prop file. There is minimal chance that I changed sth else in it.
Now my phone "refreshes"(the screen locks for 5 sec and all apps are loading just like after reboot) for 20 sec every 30 seconds so I can't do almost anything. After about 5 refreshes the phone completely restarts.
It's really annoying. If it's important, i installed patch to Flash Player and sth else with Lucky Patcher before this.
Thank You in advance for your help.
Just remove the app you think made the change then flash the rom again without a wipe, this will restore the build.prop
Sent from my rooted P880
I̶ ̶u̶p̶d̶a̶t̶e̶d̶ ̶s̶o̶f̶t̶w̶a̶r̶e̶ ̶u̶s̶i̶n̶g̶ ̶L̶G̶ ̶P̶C̶ ̶S̶y̶n̶c̶ ̶s̶o̶ ̶i̶f̶ ̶f̶l̶a̶s̶h̶ ̶4̶.̶1̶.̶2̶ ̶a̶g̶a̶i̶n̶ ̶b̶y̶ ̶o̶t̶h̶e̶r̶ ̶m̶e̶t̶h̶o̶d̶ ̶i̶ ̶w̶o̶n̶'̶t̶ ̶l̶o̶s̶e̶ ̶a̶n̶y̶ ̶d̶a̶t̶a̶?̶ ̶I̶s̶ ̶t̶h̶e̶r̶e̶ ̶a̶n̶y̶ ̶d̶i̶f̶f̶e̶r̶e̶n̶t̶ ̶m̶e̶t̶h̶o̶d̶ ̶t̶o̶ ̶r̶e̶s̶t̶o̶r̶e̶ ̶b̶u̶i̶l̶d̶.̶p̶r̶o̶p̶?̶ ̶M̶a̶y̶b̶e̶ ̶s̶t̶h̶ ̶e̶l̶s̶e̶ ̶c̶a̶u̶s̶e̶s̶ ̶r̶e̶f̶r̶e̶s̶h̶i̶n̶g̶ ̶o̶f̶ ̶m̶y̶ ̶p̶h̶o̶n̶e̶?̶
S̶o̶r̶r̶y̶ ̶f̶o̶r̶ ̶n̶0̶0̶b̶ ̶q̶u̶e̶s̶t̶i̶o̶n̶s̶ ̶;̶)̶
Problem solved by your method, everything is OK now, Thank you @non4
Related
Hey all
I've had my vivid for a while, I'm running CM10 with sultan kernel (http://forum.xda-developers.com/showthread.php?p=39590429). The other day I rebooted my phone and it took longer to boot than usual, it randomly reset itself and I lost everything (luckily I had a backup ). for some reason the kernel had downgraded itself, went from beta 14 to beta 12. I restored it from my backup but then it kept resetting itself, all the while I stayed on beta 12. Now I've decided to start a fresh, reinstalled CM10 to find that its not installing google play, another weird thing is that my kernel wont change, it stays as beta 12 even after following the instructions fully to upgrade. I need the newer kernel because it has some fixes I need. Also I need ideas as to why google play isn't installing. Any help/ideas are appreciated
Thanks in advance
SlugBoy7691 said:
Hey all
I've had my vivid for a while, I'm running CM10 with sultan kernel (http://forum.xda-developers.com/showthread.php?p=39590429). The other day I rebooted my phone and it took longer to boot than usual, it randomly reset itself and I lost everything (luckily I had a backup ). for some reason the kernel had downgraded itself, went from beta 14 to beta 12. I restored it from my backup but then it kept resetting itself, all the while I stayed on beta 12. Now I've decided to start a fresh, reinstalled CM10 to find that its not installing google play, another weird thing is that my kernel wont change, it stays as beta 12 even after following the instructions fully to upgrade. I need the newer kernel because it has some fixes I need. Also I need ideas as to why google play isn't installing. Any help/ideas are appreciated
Thanks in advance
Click to expand...
Click to collapse
The kernel didn't downgrade android1-7 just never updated the info for the kernel. I'm running beta14 as well but is says 12...so your okay there.
On the other issue what recovery are you using?
thanks for the reply
i use TWRP since CWM stopped working randomly and wont flash back
SlugBoy7691 said:
thanks for the reply
i use TWRP since CWM stopped working randomly and wont flash back
Click to expand...
Click to collapse
Which version of TWRP ?
latest i believe
The disappearing apps is because of a problem with sultan kernel... it seems to corrupt the file system if you reboot at a certain time... I have no idea what causes it to corrupt
The play store problem is from you doing a full wipe without installing GAPPS...
Sent from my Vivid 4G using Tapatalk 2
Really? I didn't think CM10 needed gapps. I just tried a standalone install of play store 4.0.26 and it installed, but it just crashes when I try open it
That's cause you need other files from GAPPS for it to work
And the play store MUST be a system app
Sent from my Vivid 4G using Tapatalk 2
ok thanks, will try that
Trust rignfool he knows what he's talking about lol. And yes you do need gapps for cm10. The only problem with cm10 that I have is very poor in call volume. Since I'm speaking of it. @ rignfool do you know a fix for that? (very low in call volume)
Sent from my Vivid 4G using xda app-developers app
I just rooted my phone and installed TWRP. My phone was working flawlessly before the root. There was absoultely no lag and everything was working great. I just rooted and it all went to hell. Here are some issues I'm having:
Lag. Every 20 seconds my phone kind of freezes for 2-3 seconds. So if I click sometime or type something during that lag, it freezes for 3 seconds and than completes the task I was doing. Really annoying because its happening so often.
Exposed isn't working right. Every time I try to install a module it gets stuck on the "installing" screen. Takes way to long to install something. I just installed Wanam and it seriously took about 2 mins.
Wanam isn't working at all. When I open the app and click something nothing happens. It's frozen completely. Than I get a pop up that wanam isn't responding would you like to close it? I've restarted my phone about 10 times.
The experience is just bad now. the lag and all these issues.. I wish I didn't root. I read that it's something do with S-Health and deleting its data and cache should help. I did that and it's still the same.
Please help!
Odin back to stock and start
over.
BAD ASS NOTE 4
Did you try a clean install deleting everything and Flashing rom again? If so and still having issues try Flashing stock firmware from samsung mobile with Odin...
YourCancer01 said:
Did you try a clean install deleting everything and Flashing rom again? If so and still having issues try Flashing stock firmware from samsung mobile with Odin...
Click to expand...
Click to collapse
I guess I'll factory reset and redo the process. Really didn't wanna do that though lol. Worked forever to set it up the way I like it.
Ya know how you feel I'm on my second note 4 my first was a dud and had to get a new one but probably did 4 resets trying different settings and talking to tech support but good luck
Did you flash a custom rom? I think being stock rooted is the problem. Mine was acting up a bit while running stock rooted 'til I took the plunge and flashed firekat.
I'd be willing to bet if you flashed any rom your problems would be over. Including the stock ones in development.
Samsung has you in a funny situation 'til you flash.
Android_Monsters said:
Did you flash a custom rom? I think being stock rooted is the problem. Mine was acting up a bit while running stock rooted 'til I took the plunge and flashed firekat.
I'd be willing to bet if you flashed any rom your problems would be over. Including the stock ones in development.
Samsung has you in a funny situation 'til you flash.
Click to expand...
Click to collapse
Do any of the ROMs offer s-pen support? Would I be able to, say, freeze S Note, flash firekat, and then unfreeze the S Note app and have it function properly?
Firekat comes with s-note. No need to freeze and reinstall.
In fact he just gave out the apk for sketchbook for galaxy in his rom thread.
PS.
Flashing a custom rom at this point is not that much different than stock or stock rooted.
It's just the hiccups are taken out by the best of the best.
All the roms have s-pen working.
If you flash firekat following the instructions in the op.
S-note will be included and work for you.
king718 said:
I just rooted my phone and installed TWRP. My phone was working flawlessly before the root. There was absoultely no lag and everything was working great. I just rooted and it all went to hell. Here are some issues I'm having:
Lag. Every 20 seconds my phone kind of freezes for 2-3 seconds. So if I click sometime or type something during that lag, it freezes for 3 seconds and than completes the task I was doing. Really annoying because its happening so often.
Exposed isn't working right. Every time I try to install a module it gets stuck on the "installing" screen. Takes way to long to install something. I just installed Wanam and it seriously took about 2 mins.
Wanam isn't working at all. When I open the app and click something nothing happens. It's frozen completely. Than I get a pop up that wanam isn't responding would you like to close it? I've restarted my phone about 10 times.
The experience is just bad now. the lag and all these issues.. I wish I didn't root. I read that it's something do with S-Health and deleting its data and cache should help. I did that and it's still the same.
Please help!
Click to expand...
Click to collapse
it happened to me, it was with xposed and wanam,,, I just installed my stock odex rom tethering rom, and install SU and restored all my apps with titanium backup, except xposed and wanam, everything is working great, goto the theme and app section, foreverloco has the inverted apps, and I am super happy this way, I just delete the bloat apps from my rom and goto go...
Noticed that Xposed was a bit wonky for me at first today too but things settled down. I basically focused on getting S-Health working first and it seemed like once I got XSecureStorage installed to address S-Health things went smoothly thereafter.
OP. Exact thing happened to me and I freaked out. I forgot about flashing stock image and went to t mobile and got an exchange. Basically I'm scared to do it again.
Sent from my t mobile note 4 or Tab s
Hi All,
Since SuperSU v2.68 (maybe before), on each reboot with my S7 Rom SuperMan v1.4.. i have no more Internet access. Even in wifi thats the same issue. Last time I updated from v2.68 to v2.76 and it works back (but no clue why). And now... it happens again but with 2.76. There is no new version and even if I applied again the zip through recovery ... I still have no more Internet.
Anyone experiencing the same issue ?
Thanks for your help and support as usual.
Appreciate.
Max
Jaco1013 said:
Hi All,
Since SuperSU v2.68 (maybe before), on each reboot with my S7 Rom SuperMan v1.4.. i have no more Internet access. Even in wifi thats the same issue. Last time I updated from v2.68 to v2.76 and it works back (but no clue why). And now... it happens again but with 2.76. There is no new version and even if I applied again the zip through recovery ... I still have no more Internet.
Anyone experiencing the same issue ?
Thanks for your help and support as usual.
Appreciate.
Max
Click to expand...
Click to collapse
Due to the fact I couldn't wait... I downloaded the v1.10 rom and wipe everything and reinstall the new ROM. It works back.. but Im a bit disappointed to not understanding why it happened. !
I have a weird problem too. I'm on Sprint Galaxy Note 5 PD2 firmware. Rooted just fine. Used a few apps and made some changes. Then I installed Stericson Busybox Pro and lost root. Now my WiFi connects and disconnects every 30 seconds. If you need logcats @Chainfire I'll send them promptly. Thank you for all your work.
I also have wifi issues when installing 2.78 on my cyanogenmod 14 (on my s5).
Hi guys..
I have recently rooted (supersu) my j7 prime g610f (7.0) after installing dm-veriry pypass and twrp and then flashed xpoosed framework and tried aome moudles out and everything seemed to be fine .
Untill i rebooted to activate a moudle and i found that the lock screen doesnt want to unlock although the pin is right( just stands still for 2 seconds and then screen turns off and i repeated the process and same thing ) ..
I managed to unlock my phone through the website and tried other lock methods and i found that every method isn't responding aswell !
I then disabled all the models and denies all root access apps and rebooted and same thing happens.
I really need some help as i cant leave my phone unlocked.
Thx.
Bassem AbdullMonem said:
Hi guys..
I have recently rooted (supersu) my j7 prime g610f (7.0) after installing dm-veriry pypass and twrp and then flashed xpoosed framework and tried aome moudles out and everything seemed to be fine .
Untill i rebooted to activate a moudle and i found that the lock screen doesnt want to unlock although the pin is right( just stands still for 2 seconds and then screen turns off and i repeated the process and same thing ) ..
I managed to unlock my phone through the website and tried other lock methods and i found that every method isn't responding aswell !
I then disabled all the models and denies all root access apps and rebooted and same thing happens.
I really need some help as i cant leave my phone unlocked.
Thx.
Click to expand...
Click to collapse
1) Easiest way is to wipe and restore a backup in TWRP from when your device was working properly if you've hopefully already made one.
2) Another option is to boot into TWRP and go into file manager and delete the folders of the Xposed Modules you installed that you think might be causing the problem(in "/data/app/", "/data/data/, etc)". Then reboot and see if that fixed the problem. You have to be very careful when installing Xposed mods, especially when they're meant to tweak the system in some way, that they are actually meant for your device, particularly with Samsung Touchwiz devices that have heavily modded software.
3) Make sure that you're using the correct Xposed version for Samsung too, as this can cause problems with properly booting up the device.
4) Last case scenario you might want to consider wiping and reflashing your rom. Then at least you can make sure your touchscreen digitizer still works and can redo everything one at a time to see what's causing the problem.
I hope one of these suggestions helps.
Sent from my SM-N920T using Tapatalk
bogarty said:
1) Easiest way is to wipe and restore a backup in TWRP from when your device was working properly if you've hopefully already made one.
2) Another option is to boot into TWRP and go into file manager and delete the folders of the Xposed Modules you installed that you think might be causing the problem(in "/data/app/", "/data/data/, etc)". Then reboot and see if that fixed the problem. You have to be very careful when installing Xposed mods, especially when they're meant to tweak the system in some way, that they are actually meant for your device, particularly with Samsung Touchwiz devices that have heavily modded software.
3) Make sure that you're using the correct Xposed version for Samsung too, as this can cause problems with properly booting up the device.
4) Last case scenario you might want to consider wiping and reflashing your rom. Then at least you can make sure your touchscreen digitizer still works and can redo everything one at a time to see what's causing the problem.
I hope one of these suggestions helps.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
Unfortunately i dont hace a backup but i noticed something that the problem is a delay in responding to my pin , and i notice that the cpu usage goes 3% to 35% when i unlock my phone usinv the pin ... i managed to unlock it by entering the pin and tapping in the screen few times to keep it lit and prevent it from sleeping .. any ideas foe that delay or cpu usage ?
Bassem AbdullMonem said:
Unfortunately i dont hace a backup but i noticed something that the problem is a delay in responding to my pin , and i notice that the cpu usage goes 3% to 35% when i unlock my phone usinv the pin ... i managed to unlock it by entering the pin and tapping in the screen few times to keep it lit and prevent it from sleeping .. any ideas foe that delay or cpu usage ?
Click to expand...
Click to collapse
Truthfully, your best bet while you have your device up and running is to backup all your apps and data with something like Titanium Backup or even sync them with the Samsung Cloud. The cloud reinstalls everything and sets your device configuration back to the way it was. Then, if you have a custom rom installed, wipe it in TWRP and reinstall it. If you're running stock, then don't wipe. Just go to the Sammobile website, download the latest firmware for your specific device and reflash it to the device with Odin. This generally fixes all system problems with a device, while preserving your app data.
Alternately, you can also try searching XDA for kernels that are made for your device that have a higher performance and try installing one of those to see if anything improves. As far as the screen going off early too, you can always check in "Settings/Display/Screen Timeout" to see what it's set for and change it to the max screen on time. It really sounds like you may have broke something system wise with Xposed or an Xposed module though, which is very easy to do, so I would really recommend starting over fresh. If you're on stock especially, as you really have nothing(data wise) to lose.
Sent from my SM-N920T using Tapatalk
Hi everyone
I hope someone can help me
so today I opened magisk manager and I was prompted to update,which I did.
but now that I've updated the manager as well as magisk through twrp, after i lock my screen and unlock it,it freezes and I can't use my touch screen anymore.
After i restart everything works but after locking it and when I unlock it again I can't use it anymore.
I wiped cache,dalvik,soft reset but the issue is still there.
anyone else had this issue?
I'm using samsung s8 on renovate ice rom v11
I do have the same problem.
On my Asus Zenfone Max Pro M1, ROM: Havoc OS.
The only solution I found is a downgrade to Magisk 17.
cpu2007 said:
Hi everyone
I hope someone can help me
so today I opened magisk manager and I was prompted to update,which I did.
but now that I've updated the manager as well as magisk through twrp, after i lock my screen and unlock it,it freezes and I can't use my touch screen anymore.
After i restart everything works but after locking it and when I unlock it again I can't use it anymore.
I wiped cache,dalvik,soft reset but the issue is still there.
anyone else had this issue?
I'm using samsung s8 on renovate ice rom v11
Click to expand...
Click to collapse
Me to bro