Plastic has come off! - Xperia Z Q&A, Help & Troubleshooting

The piece of plastic that covers the usb port has come off! I don't know what to-do? I still have it and was going to super glue it back on, but was wondering if I should use a different adhesive? I can upload a picture if it helps.
Sent from my C6603 using xda app-developers app

khsbenny said:
The piece of plastic that covers the usb port has come off! I don't know what to-do? I still have it and was going to super glue it back on, but was wondering if I should use a different adhesive? I can upload a picture if it helps.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
Ask for a replacement

Upload a picture.
Some little plastic pieces came off for me too
Sent from my Sony Xperia Z

Related

Housing broke

Hey guys after a very light drop on the corner of my INC S my housing clipped off and wont get back on
Anyone know where I can buy a new one?
Have fun @ replacing
http://forum.xda-developers.com/showthread.php?t=1785551
Sent from my vivow using xda app-developers app
I have to dissasemble the whole phone?!
There is a video about it on YouTube, you'll find it
Sent from my vivow using xda app-developers app
Is there anyway without dissasembling it?
No.
Mattviahtc said:
Is there anyway without dissasembling it?
Click to expand...
Click to collapse
You can use desintegrator to destroy your current housing and teleport to fix a new one to it's position...
If my g/f can disassemble her Incs to replace a broken screen and digitizer I'm almost positive that you can replace the housing.
Sent from my Incredible S using xda premium
This might help:
http://www.youtube.com/watch?feature=player_detailpage&v=cTOyjGol_iM#t=23s
Guess ill try it, will post results when done!
But what about putting it back together? The screen seem tough
Mattviahtc said:
Guess ill try it, will post results when done!
But what about putting it back together? The screen seem tough
Click to expand...
Click to collapse
At a guess I would say putting it back together is like taking it apart... in reverse.
But how does the screen work? You gotta heat the sceen and lcd to take them off, then they just go back on?
Yes, they do just go back on.
They will go back on, however, the way your screen is held on is two sided tape. When I did mine my tape went to crap, so I had to apply new tape around the edges to get my screen to stay in place.
Sent from my Incredible S using xda premium

Verizon Housing

Does anyone have a link for replacement housing for the VZW Note 2? My housing creaks on the side and back and I would like to replace it.
Sent from my SCH-I605 using xda premium
Subscribed. I would be interested in this as well.
Won't any note 2 housing work? Be careful when taking it apart. I would just buy the back cover first and see if it fixes the creaking before taking it apart.
Sent from my SCH-I605
I have removed the battery cover and it still creaks. I thought there was a difference between the housings but I could be mistaken.
Sent from my SCH-I605 using xda premium
chrisjm00 said:
I have removed the battery cover and it still creaks. I thought there was a difference between the housings but I could be mistaken.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
The battery cover is part of the whole thing. Removing it won't make a difference. If you keep it in its more rigid and less likely to creak.
Sent from my SCH-I605
chrisjm00 said:
Does anyone have a link for replacement housing for the VZW Note 2? My housing creaks on the side and back and I would like to replace it.
Sent from my SCH-I605 using xda premium
Click to expand...
Click to collapse
I would go with an att housing so you can take advantage of wireless charging.
iirc that housing has the cut outs for that feature whereas the vzw housing does not.
as for doing the swap, explore YT on how to vids.
Be careful when ordering your new housing. As this guy found out the hard way they are different depending on carrier.
http://forum.xda-developers.com/showthread.php?t=2102920
Sent from my SCH-I605 using xda premium
http://www.etradesupply.com/samsung/galaxy-models/samsung-galaxy-note-ii-sch-i605.html there you go

Keeping the black clean

I didn't believe those that said smudges would be problem on this phone, but it definitely is. To top it off, grit is stuck in some of my speaker holes and I've no idea of how to get it out. It sticks out like a sore thumb when the phone is clean...
Sent from my HTCONE using xda app-developers app
Damn that sucks mine has stayed clean for the most part, I don't know what I would do either if mine got like that..The speaker holes are sooo tiny very difficult to get clean..
Sent from my Black HTCONE using xda premium
I find the black quite hard to keep clean aswell I use alcohol and a cloth to combat the grease but I'm a little OCD
Sent from my HTCONE using Tapatalk 2
I have a xtreme full body kit on mine. Completely clear and has 100% clarity. You can't tell there is anything on the front or back. Takes a simple wipe of the phone with a cloth and it shines like new. No case needed.
I have a xtreme full body kit on mine. Completely clear and has 100% clarity. You can't tell there is anything on the front or back. Takes a simple wipe of the phone with a cloth and it shines like new. No case needed.
Click to expand...
Click to collapse
Hey would you mind sharing where you got it from? Would be much appreciated.
Sent from my HTCONE using xda premium
I just throw mine in the dishwasher and it gets clean as a whistle. Top shelf only!
Ahh, finally got some replies.
The body isn't much to wipe off, but in having trouble finding something to maybe poke into the grille holes
Sent from my HTCONE using xda app-developers app
themodafokinley said:
Hey would you mind sharing where you got it from? Would be much appreciated.
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
Got em off eBay 2 full kits for 8 bucks total and free shipping.
Sent from my skz_tenderloin using xda app-developers app
I just installed xtremegaurd front and back. U can definately tell it's there(as far as the feel). I'm thinking about taking the screen protector off. The back I will leave because I am waiting on my atmosphere case which has a clear back to it so I still can see the back and not worry about debris getting behind and rubbing on the anodization.
Sent from my HTCONE using xda app-developers app
greengoldmello said:
I didn't believe those that said smudges would be problem on this phone, but it definitely is. To top it off, grit is stuck in some of my speaker holes and I've no idea of how to get it out. It sticks out like a sore thumb when the phone is clean...
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
Toothbrush on the speaker holes
Sent from my Genesis that does what Nintendon't
tuscani1821 said:
Toothbrush on the speaker holes
Sent from my Genesis that does what Nintendon't
Click to expand...
Click to collapse
Piece of tape

HTC One camera lens covet gets scratched easily

Are there any recommendations for removing the scratches, or polishing them off? I have a tube of Displex that I bought for my PSP screen. Would this work for the camera lens cover on the phone?
Sent from my HTC One using xda premium
EvilSpants said:
Are there any recommendations for removing the scratches, or polishing them off? I have a tube of Displex that I bought for my PSP screen. Would this work for the camera lens cover on the phone?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
Camera lens cover is made of some hard plastic material so probably best not to use any polish on it unless it is a plastic polish.
Kukubski said:
Camera lens cover is made of some hard plastic material so probably best not to use any polish on it unless it is a plastic polish.
Click to expand...
Click to collapse
Displex appears to be some kind of plastic polish. I suppose this would suffice?
Sent from my HTC One using xda premium
I made some lens protectors out of a screen protector....you can always do that so you don't add to the scratches.
Sent from my Nexus 7 using Tapatalk 2
I had an old zagg invisible shield I cut to fit the lens
Sent from my SGH-T999 using Tapatalk 2
dirtyhamster73 said:
I made some lens protectors out of a screen protector....you can always do that so you don't add to the scratches.
Sent from my Nexus 7 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I may end up doing that as soon as I polish off those scratches.
clninja said:
I had an old zagg invisible shield I cut to fit the lens
Sent from my SGH-T999 using Tapatalk 2
Click to expand...
Click to collapse
Sent from my HTC One using xda premium
Here is a set - screen+lens protector
I wish they just sold replacement lenses. That's the only thing I miss about the old phones. The cover was build into the battery back
Sent from my HTC One using xda app-developers app
Does cutting a screen protector for lens cover not effect camera quality?
Sent from my HTC One using xda app-developers app
maybe a little.
But not something noticeable for me
Did polishing work?
EvilSpants said:
Displex appears to be some kind of plastic polish. I suppose this would suffice?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
I am wondering if you polished the lens cover and if it was successful at removing the scratches. I have a few surface scratches on my HOX+ lens cover, and polishing seems like a reasonable solution. Thanks for any feedback.
___
This is the only reason I got a cover. When laying the phone flat on its back I felt I kept scratching the lens so now it has a bit more of distance between lens and table.
Kypt said:
This is the only reason I got a cover. When laying the phone flat on its back I felt I kept scratching the lens so now it has a bit more of distance between lens and table.
Click to expand...
Click to collapse
+1 for me. the lens of my One is always in contact with the surface it's laying on. Had the first scratches on the lens within an hour.

C5303 'aluminum' frame damage (coating)

Today I dropped my phone for the first time
The so called aluminum frame was instantly damaged and to my surprise it was paint that chipped off.
Underneath there is just a hard kind of plastic.
I looked all over the place for a replacement frame but can't find any.
Anyone else with this problem?
Sent from my C5303 using xda app-developers app
Redeque said:
Today I dropped my phone for the first time
The so called aluminum frame was instantly damaged and to my surprise it was paint that chipped off.
Underneath there is just a hard kind of plastic.
I looked all over the place for a replacement frame but can't find any.
Anyone else with this problem?
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
First of all, greetings to everyone on this forum, this is my first post here.
I have a black Xperia SP (C5303), and have the same problem. Mine dropped on the street from my hand and although was in his leather casing, somehow dropped on the only side without protection. Was very suprised when I saw that 'alumium' frame was very damaged (damage looks like on your phone) from dropping only 1+ m of height inside of a protection case. The good news is that nothing else was damaged.
The phone is great for my needs, but I'm still not convinced with quality of aluminium frame. Probably this is the price of his weight. Before had Samsung Galaxy S Advance and dropped him accidently only once but without even a scratch.
I was very upset with the damage, but because of its black color it is not as visible as on your white model, so for now I won't be searching for a replacement frame... Hopefully won't be dropping him too much.
Greetings.
Yep it happens, even when I am charging, when the charger scratches the coat on the port, the paint will be chipped off.
Luckily I bought a black one, and the problem is not so bad and visible.
Sent from my C5303 using XDA Premium 4 mobile app
Redeque said:
Today I dropped my phone for the first time
The so called aluminum frame was instantly damaged and to my surprise it was paint that chipped off.
Underneath there is just a hard kind of plastic.
I looked all over the place for a replacement frame but can't find any.
Anyone else with this problem?
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Bro i thinks its chrome finish that have came out take it to the service center tell them ur prob and btw i have dropped my sp today and voila nothin happens surprised to see this thing surprise..! but this thing wouldn't happen to me..maybe its because my sp is black..and keep it carefully now bro or its will ripped off by small pressure..
Quite a disappointment. My previous sony phones where solid as a rock.
It looks easy to remove though with the two screws. What you guys think
Sent from my C5303 using xda app-developers app
Redeque said:
Quite a disappointment. My previous sony phones where solid as a rock.
It looks easy to remove though with the two screws. What you guys think
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
I dun think so ,u can see these pictures I forward from other forum (it's dropbox link )
http://db.tt/tKT3eVMr
http://db.tt/hoJDZIz2
http://db.tt/p65IhPP4
http://db.tt/qqhjEzFq
http://db.tt/XVXppyCM
Sent from my C5303 using xda app-developers app
I have this also but smaller from putting on a hard case. No more hard cases for me!
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
What about using nail polish of similar color, or a car paint and small brush?
Looks like you kicked it down the street!
Sent from my C5303 using Tapatalk 4
I think it only happens to white models, on a Spanish forum there is another user with the same problem (paint chipping off)
http://www.htcmania.com/showthread.php?t=668090
Now I regret choosing the white model, I have paint chipped off around the data cable port,stereo out, and also around power button :crying:
There are replacement frames on ebay for like 10$.
Link please
Sent from my C5303 using xda app-developers app
And are they easy to install?
Sent from my C5303 using XDA Premium 4 mobile app
Redeque said:
Link please
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
Look at this http://www.ebay.it/sch/i.html?_sacat=0&_from=R40&_nkw=replacement+xperia+sp&LH_PrefLoc=2&LH_BIN=1
Thanks a lot for the link. Not sure if I dare to replace it though. Kind of need a disassembly video first...
Sent from my C5303 using XDA Premium 4 mobile app
I recommend using a good soft case like the one below.
http://www.ebay.com/itm/Matte-TPU-S...DA_Cases&var=490159410395&hash=item2c6ffb4d1c
Same problem in my Spanish SP... Shouldn't this be solved by Sony? aluminium frame is not made of aluminum, isn´t it?
I have also the same problem on my SP. is it normal?? Sony has to replace our frame with a better one.
I'm very disappointed with this ****ty paintjob, my hpone is barely 1 month old and it already got chipped paint on a several spots on the frame. I thought the frame was aluminium because every review I've read said so.... even if it wasn't aluminium, the paint shouldn't have come off so easily. i read sony used water-based paint, maybe that's why.

Categories

Resources