Friends Help me when start to use my phone after flashing after some days sim network didn't show and i didn't know what happen, then when check the imei *#06# it is empty !
Help me !
I tried upgrade, downgrade to all the official and unofficial frimwares but the imei is ' empty '
I also i tried the android emulator tweaks ! nothing help me !
Please help me !
I didn't try this one,
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
Because it fail when i use the ports when .........
If anyone knows help me to write my origianl imei !
Related
hi i have cm 7.1 and restore it to stock
only my phone say wrong IMEI numer i try
1. Connect phone by USB
2. Enter 1809#*990# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Reset
step 1 2 3 is good and de rest i dont understand what i must do , cam some one help me ?
Hyper terminal is a tool normally pre-installed in windowsXP windows2000 etc allowing you to communicate raw data to a device via a COM port. (In the old days it could be used to connect to dialup modems etc which were plugged in via RS232 ports). I dont think it comes pre installed on windows 7 by default so you may need to manually install it.
In Win XP it can normally be found Start Menu -> All Programs -> Communications -> Hyper terminal or found here C:\Program Files\Windows NT\hypertrm.exe*
*Assuming you installed this windows component when windows was installed.
Hope this helps - good luck
Seem like one who doesn't know about Seagate Barracuda problems
Simply that's the last time i used one... just google the problem, and where the solution is should also be hyperterminal zips around there to for newer OS.
PUTTY should also work...
Hi all
How to write the IMEI What should I do?
Also, as BT address or going on?
Sent from my SC-02C using xda premium
Why whould you change imei?
Thanks for reply
We think the Internet can not be used for different IMEI is written in the back of the battery pack
Sent from my SC-02C using xda premium
I don't know man, I think that mobile operators identify users with simcards.
Maybe say something more about your situation.
xnorenkaix said:
Hi all
How to write the IMEI What should I do?
Click to expand...
Click to collapse
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
You should know that in many countries changing IMEI is illegal!
How did your reply Thanks...
I have come to learn about the IMEI
How did your reply Thanks
Sent from my SC-02C using xda premium
radkor said:
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
You should know that in many countries changing IMEI is illegal!
Click to expand...
Click to collapse
i cant do it coz i recieved unknown device alert when selected CP USB
i recieve error when pressing enter after typing the right IMEI.
What should i do?
sorry
i didn't type ","
everything is perfect now.
Thanks
p.s. i used "tutty" instead of "hyperterminal" cause of windows 7
i cant do it ....coz when i go to ur 2nd step ....it says coonection problem or invalid MMI code
P.S my IMEI is not displaying after flashing CM7 ...and i seriously want it back :|
Help rebuild imei after smartflesh tool. Now installed Zeus 2.2 + Hidden menu pack. In "Port settings" i have only three points: "Diag setting" "USB Switching" "Data Setting". "Select CP USB" - I do not have.
--
update: Found a shift in the "AP CP USB Switchings". Now another problem, I do not see the printed text in HyperTerminal. If i tape "at" blind to dial and press enter, see the corresponding OK.
---
In the blind well replaced. Thank you.
This was successful as if by magic!
Was really helpful, thank you.
Sent from my optimus bright
hi,
i always get "imei write error" when i try changing imei on my p970 ob.
do i need root rights maybe?
hxxp://www7.pic-upload.de/25.06.12/brc5zeolbtj.jpg
I have tried with all terminal apps like hyperteminal, tutty, putty,...
thanks
Same problem
rakeem78 said:
hi,
i always get "imei write error" when i try changing imei on my p970 ob.
do i need root rights maybe?
hxxp://www7.pic-upload.de/25.06.12/brc5zeolbtj.jpg
I have tried with all terminal apps like hyperteminal, tutty, putty,...
thanks
Click to expand...
Click to collapse
I have the same exact problem and don't know what to do about it. I don't think you can get root as that's not really a terminal??
EDIT: i just got it to work. 2 things I did differently 1) turned off airplane mode. 2) didn't change the baud rate setting to match the one in the lg mobile modem details. probably airplane mode was the problem though . Also, I used the commas, but not one at the end.
Hello.
thanks, it work perfect.
Thanks for your help.
Sent from my LG-P970 using xda app-developers app
terminal does not respond
Hi all,
i have t-mobile g2x (aka p999dw). i followed all steps. For access to hidden menu i typed "1809#*999" (coz my device is 999dw. It appeared and i tapped to port settings. I also checked "retain cp usb after reboot" and phone rebooted. i chose correct port. and in putty i checked "serial" section, then typed comx (which my own), baud rate 115200. Everything fine. When i hit the Enter putty pops-up a window but nothing respond.
Where am i wrong?
I have used tutty. for the first time i saw no signs in window. they appear after second open
tutorial request
ramrod said:
I have used tutty. for the first time i saw no signs in window. they appear after second open
Click to expand...
Click to collapse
can you upload a video about "how did you" or could you share photo tutorial?
try another hyperterminal
the first two ones did not work for me
i had to do a full-flash of my p970 and after this, there is no imei
i tried to change it but at point 3. "to set into cp-mode", my computer didn't install a driver and so he didn't recognized my phone.
when i turn back into ap-mode, he recognize it. in cp-mode not
Brainfart91 said:
i had to do a full-flash of my p970 and after this, there is no imei
i tried to change it but at point 3. "to set into cp-mode", my computer didn't install a driver and so he didn't recognized my phone.
when i turn back into ap-mode, he recognize it. in cp-mode not
Click to expand...
Click to collapse
How about trying another USB port? Or maybe another PC, if you have the chance, to use another one
I played around with smartflash yesterday and i checked the 'erase entire cp' which will erase my imei , thinking that it would unlock me full market access because the play store checks the imei to determine the country restrictions . when the phone booted up, it showed a strange korean message which i could not read and the only english letters were 'CP' . i think that had to do with me checking the 'erase entire cp'. now,where ever i go there is no signal , i think my phone is blacklisted because it did not have a imei . is there any way to flash a imei to my phone ?
Well I had to do this when my phone got security error. I found a tutorial in XDA, sorry I'm at school so I can't search it for you but I had to use Hyperterminal (try to Google : restore imei hyperterminal xda).
EDIT : What is strange is that my network was working fine and no strange message was showing, not like you.
Sent from my LG-P970 using xda premium
http://forum.xda-developers.com/showthread.php?t=1447311
Sobralobo said:
Well I had to do this when my phone got security error. I found a tutorial in XDA, sorry I'm at school so I can't search it for you but I had to use Hyperterminal (try to Google : restore imei hyperterminal xda).
EDIT : What is strange is that my network was working fine and no strange message was showing, not like you.
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
netum said:
http://forum.xda-developers.com/showthread.php?t=1447311
Click to expand...
Click to collapse
Thank you !!!!!!!! but not at computer right now , can't do it
The tutorial did not explain clearly , i cannot find COM settings in hyperterminal and what i type in hyperterminal would not show up . hyperteminal would not detect my device , it only detected COM 17(my phone) in S/W Upgrade Mode .PLEASE HELP , i don't want to spend money buying another phone or go to the service center
So, you need to switch usb mode from AP to CP from hidden menu 3845#*970#. Then when you create a new connection choose com 24 or smth like that. it will work! just try more.
radkor said:
You need a HyperTerminal or other Terminal app that can connect to modem on COM port and run AT commands.
1. Connect phone by USB (phone should be on normally)
2. Enter 3845#*970# in dialer
3. Select Port Settings -> Select CP USB
4. Start hyperterminal, in COM settings select same port like in devide manager -> LGE mobile USB Serial Port, 115200bps
5. Type AT if response is not OK, change port number
6. Type at%imei, it should display your current IMEI
7. Type at%imei=x,x,x,x,x,x,x,x,x,x,x,x,x,x,x , where x,x,x... is your orginal IMEI number
8. Change again from CP USB -> AP USB
8. Restart
You should know that in many countries changing IMEI is illegal!
Click to expand...
Click to collapse
Redpik said:
So, you need to switch usb mode from AP to CP from hidden menu 3845#*970#. Then when you create a new connection choose com 24 or smth like that. it will work! just try more.
Click to expand...
Click to collapse
But there is no COM settings in hyperterminal..........and what i type in hyperterminal doesnt show up
Sent from my LG-P970 using xda premium
I now know what caused the problems! It was because i did not disable my sim security before i flashed the ics rom so my phone doesn't recognises the umts network after i flashed it .But after i flashed another gb rom, the problem becomes like pemanent or some sort of thing...............phone still cannot call........The problem most likely had to do with one of the ics roms and part of the problem should be of the 'erase entire cp' thing
Is there anyway I can get my IMEI back from my s5830 I managed with mt s5830i but things just arent the same?
Is there a way to get to my efs folder?
Please help ASAP
anyone help me
Sent from my GT-S5830i using xda premium
Follow..
1.You need to be on stock ROM
2.Phone has to be rooted
3.Dial *#7284# on phone's keypad
4.Click Qualcomm USB Settings
5.Select RMNET + DM + MODEM and click ok
6.Download QPST and install it QPST
7.Connect T999 to Windows PC with USB cable (make sure you have all Samsung drivers installed and working)
8. In Windows open Device Manager, go to Ports (COM&LPT) and look up what port your T999 is using
9.Open QPST Configuration program
10.Click Add new port
11. Enter port (for example "COM6") from step 8 to boxes "Port" and "Port Label"
12.Open QPST RF NV Item Manager program
13.From top menu click on Settings then Comport
14. In Comport Configuration window click on drop down menu and select your port from Step 8 then click OK
15. In RF NV Item Manager click on Read Supported NV RF Items (first toolbar button or select it from File menu on the top)
16. Below on left side go to line number 550 and click on it
17. On the right side, check box "Hex" this will display 9 boxes below where you enter your IMEI
18. You enter it in pairs of 2 digits and backwards
Example:
your IMEI is 353024052511214
8 (this number is not part of your IMEI but has to be entered)
3a (first digit of your IMEI ,"a" has to be there also)
35
20
04 (this can be written as just 4 also)
25
15
21
41
19. Click Write NV button
20.You can reboot and disconnect your phone now.
21. On your phone's keypad dial *#7284# go to settings and check MTP + ADB to go back to original state.
Or refer to this thread.
http://forum.xda-developers.com/showthread.php?t=1802024
Hi does this method work? I have tried QPST it read phone nv fine but when writing i get
Exception Thrown!! error
NvManager;;writeToPhonoe( const string comPort ) -
QpstServer;;sendSynclmpl - Error
Code = 80004005.
It seem like the phone is stopping the writing of the imei. Any ideas? Is this method confirmed working on s5830 not (i).
[email protected]
[email protected] said:
Hi does this method work? I have tried QPST it read phone nv fine but when writing i get
Exception Thrown!! error
NvManager;;writeToPhonoe( const string comPort ) -
QpstServer;;sendSynclmpl - Error
Code = 80004005.
It seem like the phone is stopping the writing of the imei. Any ideas? Is this method confirmed working on s5830 not (i).
[email protected]
Click to expand...
Click to collapse
I have the same problem with my S5830. Any solution?
hi I can't see the hidden menù after pressing the code in the dialpad, sorry for my bad english i'm Italian
hey guys please tell me how to fix IMEI permanently, and my signal reception is very poor , is anyone facing this problem?:crying:
i have the same problem when i try to put imei code through chamelophone in android nougat roms
no signals are showing and also no imei code :crying::crying::crying::crying:
Requirements:
- MobileUncle Tool apk.
- Your IMEI number(you can find it below the battery)
How to:-
1.Run MobileUncle Tool
2.Enter Enginering Mode
3.Choose Enginering Mode (MTK)
4.Choose Tab Connectivity
5.Choose CDS Information
6.Choose Radio Information
7.Choose Phone 1,
Write on the row:
AT + EGMR = 1.7, "IMEI_1 NUMBER"
- Press SEND AT COMMAND
NOTE : double inverted quotes are part of the code.and there should be a space between AT and +.
8. For Phone 2,
write:
AT + EGMR = 1.10, "IMEI_2 NUMBER"
Press SEND AT COMMAND
9. Restart Phone
Dial *#06# and check your IMEI.