Hi guys, who can help me
i ve updated RocketRom JB XXLSZ from Eybee for 4 days ago. however i have a problem, i cant pan (scroll) my homescreen, so how could i do? please:crying:
Using the same ROM I have no such problem. Have you well made full wipe before flash ROM ? Try to reboot into recovery the wipe cache, wipe davilk cache, reboot system. Perhaps the problem disappears.
qnt said:
Using the same ROM I have no such problem. Have you well made full wipe before flash ROM ? Try to reboot into recovery the wipe cache, wipe davilk cache, reboot system. Perhaps the problem disappears.
Click to expand...
Click to collapse
thanks so much but i made full wipe before flash ROM carefuly n i also made full wipe one more time, it still has such problem:crying:
Have you installed any mod after ROM flash ? I've only installed the original ROM and my applis but no mod. That question because few others have wake up problem after screen off, perhaps they have mods.
Related
hi,
i have a Gtab P1000 with the stock rom GB-Stock-Safe-V3.
i upgraded to Icarus_NoWipe. All works fine great job.
but now i want to make a clean install and wipe all data.
can i use the recovery with icarus_nowipe (allready installed) and select wipe data/factory reset and Wipe Dalvik Cache
or i must replace it by icarus_wipe and make a new install
thanks a lot
nobody
Taz80 said:
but now i want to make a clean install and wipe all data.
can i use the recovery with icarus_nowipe (allready installed) and select wipe data/factory reset and Wipe Dalvik Cache
or i must replace it by icarus_wipe and make a new install
thanks a lot
Click to expand...
Click to collapse
You can use both methods as far as I know.
My best bet for clean install is after doing a factory reset, flashing the stock (reminding you that there is a new V5 of it now) and flashing the wipe version. Be careful not to forget flashing a modem in the process.
After the process, I charged to full; wipe the batt. stat and charge to full again and use the tab until 0% batt to charge it again.
One note; better wait for the next OVercome version or use alternative kernels as Koxudaxi's or Dip7's since Icarus's kernel voltage table may not work for overclocked frequencies if you do that.
Hope that helps.
Regards
Kongar
thanks a lot Kongark
now the problem is resolved
because the newest version of "Overcome ROM 3.0.1 JUPITER" is out
sorry for my poor english
best regards from France
Hi all .. First thx for the Amazing Forum
Well I installed the AOKP rom on my galaxy mini everey things went right until rebooting the system
the phone stay repeating the bootanimation without turning ON
Plz Help Me I'm n**b
Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.
yackovsky said:
Go to cwm, wipe cache and dalvik, reboot. If it doesn't help reflash ROM or restore backup.
Click to expand...
Click to collapse
I tried to wipe cache and dalvik .. didn't work
i'll try to flash it to android 2.3.6 by odin & reinstall the aokp rom
thx for reply
still having the same problem
Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble
yackovsky said:
Err... you don't need to flash stock ROM again... just do a clean install of aokp... or any other ROM if it gives you trouble
Click to expand...
Click to collapse
I installed CM10 .. thx for help ... i think there is a problem in the new version of AOKP
There's no problem for me are you sure you've got the latest?
you wiped cache and dalvik cache
but you will also need to wipe data
dheeraj (dhlalit11) said:
you wiped cache and dalvik cache
but you will also need to wipe data
Click to expand...
Click to collapse
I try it too But Still having the problm
Anyway Thx all I installed the cm10 now and it worked pretty cool
hey guys,
which is the best method to clean your phone before flashing a new rom, or maybe bringing your phone to the state it was just after flashing a new rom. i tried data factory reset, wipe cache , wipe dalvik with kernels we have here and i found remainents of zip files i had flashed after setting up my rom and using newer mods. i dont want to format system, preload all the time.
which is your perfect, effective method ? speedmod kernel and its recovery or phillz , then which version ?
thanks
rraaka said:
hey guys,
which is the best method to clean your phone before flashing a new rom, or maybe bringing your phone to the state it was just after flashing a new rom. i tried data factory reset, wipe cache , wipe dalvik with kernels we have here and i found remainents of zip files i had flashed after setting up my rom and using newer mods. i dont want to format system, preload all the time.
which is your perfect, effective method ? speedmod kernel and its recovery or phillz , then which version ?
thanks
Click to expand...
Click to collapse
why you dont want format system and preload before flashing rom?
what I do before flashing any rom is:
flash philz kernel
wipe data / cache / dalvkk cache
format / cache / system / data / preload
and then flash new rom
and thats it, with this procedure I have never faced any issue with any rom I have flashed.
usualy I use this method even befoe restoring my nandroid backup.
above methods I using with philz and speedmod, but i prefer philz when wiping and flashing and making backup, because it has nice cwm for doing that. but after I flash new rom I immediatly flash speedmod because it is the better than philz if you drive your new rom, and you are not in cwm at the moment
hope this helped
Sent from my GT-N7000 using xda app-developers app
completely agree with you djoni, but when you are flashing continuously, experimenting a lot ...you know ...this and that,
isnt a data factory reset , wipe cache, wipe dalvik supposed to bring you to that condition just after booting up after a new rom flash ? why were there remanents from a mod i had flashed after using the rom for some time ?
Hi
A few days ago I was using my phone normally when he suddenly caught, well it was already quite normal to happen however I tried to turn it back and he did not call so I went in Recovery mode and tried using Data Wipe only he then caught Recovery tried using Odin and put the Original Rom but it always hangs on the Wipe Data I no longer know what to do does anyone help me please?
I have looked in my country (Brazil) forums but found nothing so hopefully you can help me from XDA
Sorry for my bad english I used Google Translate
after odin flashing process has done. do full wipe (wipe data wipe cache) then reboot.
dzeig said:
after odin flashing process has done. do full wipe (wipe data wipe cache) then reboot.
Click to expand...
Click to collapse
But the Recovery Mode lock in the Wipe Data
bruno13melo said:
But the Recovery Mode lock in the Wipe Data
Click to expand...
Click to collapse
You can install a new recovery (CWM or TWM). Than you will can do wipes.
Give me thanx please if I helped.
@alexissuper > Please don't be tell people wrong things. You CAN wipe data even with stock recovery. The wipe data function is available in all recovery mode. Flashing new recovery won't solve any problem.
So I think sdcard may cause this problem, format sdcard or partition it. Report back when the problem solved or persisted.
F4uzan said:
@alexissuper > Please don't be tell people wrong things. You CAN wipe data even with stock recovery. The wipe data function is available in all recovery mode. Flashing new recovery won't solve any problem.
So I think sdcard may cause this problem, format sdcard or partition it. Report back when the problem solved or persisted.
Click to expand...
Click to collapse
My SD Card has been replaced and not changed anything, I've tried without the card too and nothing has changed, and when I had the CWM it also fought in wipe data
Again sorry for my english D
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Do you ever wipe the system partition?
upconvert said:
Do you ever wipe the system partition?
Click to expand...
Click to collapse
Agree. In TWRP, a factory reset only wipe data, cache and dalvik cache. You have to manually format system. A clean install requires to wipe system, data, cache and dalvik-cache.
---------- Post added at 08:18 AM ---------- Previous post was at 08:17 AM ----------
danizmax said:
Hi,
I've been using galaxy tab 8.9 with custom ROMs for more than a year and a half now, and sometimes it was acting strange, like flickering dialogs and crashes. Usually this meant an unstable ROM or just cache wasn't cleared when a new ROM was installed. And it was stable for some time, till I did a reset. Now no ROM is stable any more in addition to this, the battery sometimes says it is empty, but after restart it is back to normal status. I tried number of ROMs without luck, all are flickering lately which must mean it is not ROMs fault.
I am running out of ideas what to do with this tablet, so I'm asking if you guys have any suggestions, what else can I do to fix it.
NOTE: when installing a new ROM, I always did it with CWM recovery from internal storage with data, cache, dalvik wipe and factory reset.
regards, Daniel
Click to expand...
Click to collapse
Try flashing the original firmware via odin.
iZLeeP said:
Try flashing the original firmware via odin.
Click to expand...
Click to collapse
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?
danizmax said:
Flashing original firmware would be my last resort. Is there any difference between odin and CWM flashing?
Click to expand...
Click to collapse
Of course. Flashing original firmware via odin brings back the original setup that came with the tab out of the box. I just don't remember if it will delete the contents of internal sd card. In any case, you can flash original firmware thru CWM as I always do, though I only flash boot and system images I modified in Kitchen. It will still be stock but only that it has been debloated, rooted, busybox installed, init.d enabled, and some system apps replaced.
Just remember that when flashing ROMs via CWM do a factory reset (wipe data, cache, dalvik-cache). In addition to the wipe, the rom.zip itself formats the system partition prior to flashing.