Related
Hi,
I'm about to get a Trinity tomorrow, and want to upgrade to WM6.
I know I could go through installing all the roms, but what I'm looking for is one that mimics mostly the roms on the Touch Dual or Polaris. Ie the HTC home theme, touch cube, htc album music player, keyboard input etc and all the other bits.
I'll probably will try out a few roms, but from the screenshots it's quite hard to tell which one to try first.
I know people will have differing opinions, but as I'm looking for something specific could anyone help?
Any suggestions would be great.
Thanks
andrewpmoore said:
Hi,
I'm about to get a Trinity tomorrow, and want to upgrade to WM6.
I know I could go through installing all the roms, but what I'm looking for is one that mimics mostly the roms on the Touch Dual or Polaris. Ie the HTC home theme, touch cube, htc album music player, keyboard input etc and all the other bits.
I'll probably will try out a few roms, but from the screenshots it's quite hard to tell which one to try first.
I know people will have differing opinions, but as I'm looking for something specific could anyone help?
Any suggestions would be great.
Thanks
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=354954&highlight=touch+rom
http://phone.msndirect.com/phone/download.html
I cannot get it to work on the Kaiser, has anyone tried this yet?
Won't install for me either. Says it's not intended for this device.
I'm running v3.0 Sleuth. Could be it doesn't like WinMo 6.1, but I have no way to verify that unless I reflash.
I have a t-mobile Wing and it doesn't work either. I think it is because all the phones listed as supported are smartphones (without touch screen).
Anyone know a work-around install for touch screen based units?
Just look at the name of the file it installs: SP50.cab = SP= Smartphone.
I've adjusted the CAB a little to allow it to install on a Kaiser. But when installed it's not 100%.
It installs, you can run the MSNDirect.exe through File Explorer, but as the controls are geared towards SmartPhone, it's not all that usable
Perhaps someone with additional skills can tweak it.
Is it possible for someone to tweak the program to be more touch friendly?
I'm pretty bummed about this. I've had a SPOT watch for years and would really like to have it on my Kaiser.
I have a Dash sitting on a shelf at home, that my wife didn't want, but I really can't switch to a Dash for MSN Direct.
its work for me
samsung b7320
but no wethr for iran .......
sucks!!!
but rep+++
yhx
Wow I didn't even know this service was still around...I used to have one of the watches, they were pretty cool.
This does not pertain to Kaiser Rom Development. Please post questions like this in the Kaiser General section in the future.
Thank You
Is there a 100% working YouTube app for the Touch Pro with custom roms?
I've seached all over for a solution to get YouTube on my Touch Pro, and I've run across various solutions but none that work like the phone did out of the box. Some cabs have a QVGA app + VGA skin and some just don't play the sound. I've tried like 5-6 possibilities, and again, none of them work.
Does anybody have one that they installed and verified working?
Thanks!
Edit-
Solution: install HTC TouchFlo (non-3D) and YouTube will work. Credit to DA_G http://forum.ppcgeeks.com/showthread.php?t=47737
did you try the generic wm6 touchscreen cab from skyfire.com?
benitojuarez said:
did you try the generic wm6 touchscreen cab from skyfire.com?
Click to expand...
Click to collapse
Skyfire works, although it's the video displays is far from smooth.
I was actually referring to the YouTube application in START->Programs. I find it a lot more functional as an application as opposed to having it embedded in a browser window.
Check your custom rom again - it probably has it installed. I know ROMeOS does for instance.
flinx1 said:
Check your custom rom again - it probably has it installed. I know ROMeOS does for instance.
Click to expand...
Click to collapse
I've put together a bunch of roms with 3 different builds, with and without the HTC YouTube app.. no luck, still get the same error.
Custom rom in PPC Kitch -> no YouTube?
quick99si said:
I've put together a bunch of roms with 3 different builds, with and without the HTC YouTube app.. no luck, still get the same error.
Custom rom in PPC Kitch -> no YouTube?
Click to expand...
Click to collapse
have you try youtubeplay yet? it work on both my Diaomnd, and Touch Pro. The app even allow you to save the video you are watching on youtube onto the phone.
joshyth said:
have you try youtubeplay yet? it work on both my Diaomnd, and Touch Pro. The app even allow you to save the video you are watching on youtube onto the phone.
Click to expand...
Click to collapse
Yes but I really want the HTC application. The main reason is that I think that if this is resolved, I can also fix the same error that popups up when trying to open HTC Audio Manager.
Just reflashed a stock rom and it works. Flashed a 20931 base with ONLY YouTube selected and I get the error :/
quick99si said:
I've put together a bunch of roms with 3 different builds, with and without the HTC YouTube app.. no luck, still get the same error.
Custom rom in PPC Kitch -> no YouTube?
Click to expand...
Click to collapse
What error? I know the Youtube app does come with various custom roms (and does work), so if the problem is when you try to cook your own, there's something you're doing wrong when adding it. Try asking in the ROM forum then, since the app itself is fine.
flinx1 said:
What error? I know the Youtube app does come with various custom roms (and does work), so if the problem is when you try to cook your own, there's something you're doing wrong when adding it. Try asking in the ROM forum then, since the app itself is fine.
Click to expand...
Click to collapse
Error: "The file 'YouTube' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found."
Roms out there do have it, you're right, but it looks like the OEM in the latest kitchen is corrupted (the DSM file is substantially smaller from other Youtube_VGA OEM's I've seen). None of the builds work so it has to be the OEM, some dependency, or a setting/certificate of some sort.
We've made minimal headway on PPCGeeks: http://forum.ppcgeeks.com/showthread.php?t=49296
HTC Youtube is dependant on HTC TouchFlo. It will spit back this error if you don't have it installed.. I have cab's for both on my ROM thread, and yes, they work
I even posted it up on ppcgeeks a while ago.. http://forum.ppcgeeks.com/showthread.php?t=47737
I was getting that error, once I tried running opera mobile, left it running in the background, and started the youtube app. it works fine, even after i've closed both programs and rerun youtube by itself. after a reset or long time ( like days) of no use I sometimes have to do this again. If you're cooking your own roms however I'm clueless. This is just a workaround, and slightly annoying, but doable for me.
oh ya, I almost forgot. The player in kinoma play works flawlessly for me. Might want to try it
Da_G said:
HTC Youtube is dependant on HTC TouchFlo. It will spit back this error if you don't have it installed.. I have cab's for both on my ROM thread, and yes, they work
I even posted it up on ppcgeeks a while ago.. http://forum.ppcgeeks.com/showthread.php?t=47737
Click to expand...
Click to collapse
Wow.. that worked. I searched the crap out of these here internets and I clearly didn't read your thread. Thanks for the heads up.
the one from ppcgeeks works, it is the original one that comes with the sprint version of the htc touch pro (or diamond, i forget) but it works flawlessly and has high quality for if you have fast enough connection
The YouTube application is dependent on TouchFlo and HTC Streaming Media to work.
Here is a .cab for the youtube app in VGA as well as a .cab for HTC streaming media. If you install both it will work (at least it does for me) and my Raphael did not have either preinstalled in ROM.
Hope that helps.
NC
Youtube on diamond
NCU1980 said:
The YouTube application is dependent on TouchFlo and HTC Streaming Media to work.
Here is a .cab for the youtube app in VGA as well as a .cab for HTC streaming media. If you install both it will work (at least it does for me) and my Raphael did not have either preinstalled in ROM.
Hope that helps.
NC
Click to expand...
Click to collapse
I got an HTC DIamond with clean wm 6.5, and I cannot get it to work with those two files you posted. It starts the app, shows menues, though after connection doesn't play anything. Any advise?
just grab one of Da_G's winmo 6.5 kitchen's, I've had no problem playing full screen youtube movies with the new internet explorer in winmo 6.5
quick99si said:
Is there a 100% working YouTube app for the Touch Pro with custom roms?
Click to expand...
Click to collapse
I had the EXACT same problem a while ago. The problem was that the only way I could use HTC Youtube was to get a rom with it cooked in, which was problematic because it was limiting. I searched and search, finally forced to make a topic, and still couldn't find an answer. Eventually, diligence paid off.
I know you found the solution already, but here's one which doesn't require you to change the TouchFlo.
Do this:
1) Download HTC Youtube app of your choice - http://forum.xda-developers.com/showthread.php?t=472940
2) Install Ravest Youtube Fix - http://www.megaupload.com/?d=ZGQJ3H0R
Using these two, I was able to get HTC Youtube to work in every single rom I tried so far.
Hopes this helps.
8525Smart said:
I had the EXACT same problem a while ago. The problem was that the only way I could use HTC Youtube was to get a rom with it cooked in, which was problematic because it was limiting. I searched and search, finally forced to make a topic, and still couldn't find an answer. Eventually, diligence paid off.
I know you found the solution already, but here's one which doesn't require you to change the TouchFlo.
Do this:
1) Download HTC Youtube app of your choice - http://forum.xda-developers.com/showthread.php?t=472940
2) Install Ravest Youtube Fix - http://www.megaupload.com/?d=ZGQJ3H0R
Using these two, I was able to get HTC Youtube to work in every single rom I tried so far.
Hopes this helps.
Click to expand...
Click to collapse
Tried this and it does not work for me. Needless to say I have been all over looking for a fix to this
this one works great for me on custom roms. its not the newest version in the world, but it works like a charm
moSess said:
Tried this and it does not work for me. Needless to say I have been all over looking for a fix to this
Click to expand...
Click to collapse
Hmm, to be honest, at this point, it has been a while since I had to use my own solution. See, I've switched to WM6.5, and my solution only worked (for the most part) with WM6.1.
I'm curious that you're looking for a solution, though. Doesn't pretty much all custom ROMs come with it cooked in nowadays?
Hello all,
For Canadian Rogers/FIDO subscribers, like myself, Name display on non- rogers or Fido phone does not work. However, with the help of pandaboyy and others, they were able to get it working on the Diamond1 and Touchpro1. Please see:
http://forum.xda-developers.com/showthread.php?p=3099452#post3099452
I would love to get Name display working on my new diamond2, I have talked to pandaboyy and because he doesn't have the diamond2, he was not able to help me.
My suggestion is: I would appreciate any chef cooking for the D2 to implement their method to get the name display to work. This would help all Canadian susbcribers like myself.
Thank you very much... Looking to get the name display working!!!!
Getting Name Display to Work [bounty available]
Hello all,
For Canadian Rogers/FIDO subscribers, like myself, Name display on non- rogers or Fido phones does not work. However, with the help of pandaboyy and others, they were able to get it working on the Diamond1 and Touchpro1. (a detailed instructions for chefs to implement it is already available in the link below):
http://forum.xda-developers.com/showthread.php?p=3099452#post3099452
I would love to get Name display working on my new diamond2, I have talked to pandaboyy and because he doesn't have the diamond2, he was not able to help me. However, he is welling to help any person...
My suggestion is: I would appreciate any chef cooking for the D2 to implement their method to get the name display to work. This would help all Canadian subscribers like myself.
Thank you very much... Looking to get the name display working!!!!
I'll be more then happy to contribute 30 US dollars via paypal who ever gets a CAB working. other people are welcome to contribute money wise.
how can I get someone to help me with it? I'd really appreciate any help...
thanks
Check my profile , contact me with msn
I will try to help
Cheers..!
Try using this .CAB. It should be universal for most HTC-based WinMo 6 devices, as it works on my Xperia.
Hope that helps!
It did not work :'(
would anyone know why?
thanks
iamcanadian said:
It did not work :'(
would anyone know why?
thanks
Click to expand...
Click to collapse
The only way we could get this to work on a Topaz or a Rhodium is for Rogers to release one of the devices. Name display worked on the Diamond, Raphael and Xperia because Rogers released a Rogers-branded Diamond, and the rilphone.dll from the stock Rogers ROM was used to get CNAP to work in all Diamond, Raphael and Xperia ROM's. However, the despite having most of the same hardware (processor, memory, etc.) specs, the Rhodium and the Topaz are different and that's why the rilphone.dll from the Rogers Diamond ROM won't work in them.
Rogers Name Display worked on Tilt2
efrant said:
The only way we could get this to work on a Topaz or a Rhodium is for Rogers to release one of the devices. Name display worked on the Diamond, Raphael and Xperia because Rogers released a Rogers-branded Diamond, and the rilphone.dll from the stock Rogers ROM was used to get CNAP to work in all Diamond, Raphael and Xperia ROM's. However, the despite having most of the same hardware (processor, memory, etc.) specs, the Rhodium and the Topaz are different and that's why the rilphone.dll from the Rogers Diamond ROM won't work in them.
Click to expand...
Click to collapse
I am running LEO CELL EVO 4 Rom on my Tilt2. SO i gave the Rogers Name Display cab link above (under scar45 post) worked on my Tilt 2. Well not 100%. It works flawlessly with WM Phone dialer skin. However with HTC Sense Phone skin, during the incoming call it only shows the number however as soon as you answer it, the name shows up. it also shows up under the call logs. SO i am guessing for the HTC Phone dialer it must have something to do with the resolution of the phone canvas? any ideas anyone?
the rilphone.dll in the cab works with the tilt2. battery drain is normal with other rilphone.dll. it did not brick my phone. I will experiment more and let u guys know
shinku said:
I am running LEO CELL EVO 4 Rom on my Tilt2. SO i gave the Rogers Name Display cab link above (under scar45 post) worked on my Tilt 2. Well not 100%. It works flawlessly with WM Phone dialer skin. However with HTC Sense Phone skin, during the incoming call it only shows the number however as soon as you answer it, the name shows up. it also shows up under the call logs. SO i am guessing for the HTC Phone dialer it must have something to do with the resolution of the phone canvas? any ideas anyone?
the rilphone.dll in the cab works with the tilt2. battery drain is normal with other rilphone.dll. it did not brick my phone. I will experiment more and let u guys know
Click to expand...
Click to collapse
Well, I did the same thing you did, and I get the same results. Strange that the name is displayed in Sense only after you answer the call...
Hopefully someone will be able to figure it out.
Hi there,
Just another Canadian Rogers customer who would love to have name display on my HD2...any advice would be appreciated.
Cheers.
mhtoto said:
Hi there,
Just another Canadian Rogers customer who would love to have name display on my HD2...any advice would be appreciated.
Cheers.
Click to expand...
Click to collapse
So far no one has gotten it to work properly using an HTC dialer. If you don't mind using the WM dialer, then it works just fine.
Thanks, I did get it working with WM Dialer.
For other noobs, here is how to switch from HTC to WM dialer:
/forum.xda-developers.com/showthread.php?t=364297[/url]
And how to get to the registry:
/forum.xda-developers.com/showthread.php?t=475141[/url]
[just put the http:/ at the beginning of the links above, because I'm new I cannot post full links]
Then run the .cab file posted in this thread.
cheers.
can someone help me find the newest builds of youtube, cab or oem package, i dont really know where to look for new rom dumps around here, im happy if its from a wvga device cuz i can get it to someone who can port it for me, but im just looking for the latest ones thanks
I think there are different versions too, because the one I found is probably from the Touch Diamond because it fails to rotate when the keyboard is opened (and it messes up the GUI).