Well Im not great at directions so this is the best i can do.
Summary
There are 2 ways that I know to port a theme to your device.
1. Using the metamorph app if its a metamorph theme.
2. Using 7zip ect.. if its a flashable theme. (most common)
Metamorph Instructions
1. First things first is to download the theme that you want to port.
2. Your theme will be a zip file containing only image files from apk's
3. Put the zip file on your sd card
4. Make sure your device is set to 320x480 resolution or metamorph app will not work.
5. Open metamorph app and start a new project.
6. Locate your zip file and let all the apks load up.
7. Install each apk one at a time. Do not install any jar files as they will cause your phone not to boot.
8. Reboot and your Theme should be working on your phone.
Flashable Theme Porting Instructions
Its not that difficult, once you get the hang of how 7zip works it will be your best freind. Its just a process of dragging and dropping images from one apk to another all within 7zip.
What the metamorph app does is takes themed images and places them into the correct apks res\drawable folders in your system.
Knowing what metamorph does as an app, you can do this manually using 7zip.
1. Download the theme that you want to port. It will be a system folder with an app,framework, and font folder inside of it.
2. Open up that system folder with 7zip
3. Make a copy of the system folder of your current rom and open up that system with 7zip as well. You should now have 2 different 7zips open. Make sure to keep track of witch is witch.
4. Open up the app folder of the themed system and open up the first apk thats in there.
5. Go into the res\drawable folder in the apk in both your system and the themed system.
6. highlight and drag and drop only the images from that folder to the same folder in the other base apk. Make sure to NOT highlight any xmls.
7. Do the same for any images in any other drawable folders the are mdpi.
8. If there are only hdpi folders and no mdpi folders than you will have to convert those images to mdpi size before using them. If there are both, than only use the mdpi images.
9. When finished overwriting those images in that first apk, go back to the other apks in the app folder and do the same thing. You can do all of this from with in 7zip. No need to exit 7zip in this entire process.
10. Open up the themed framework folder and you will see a framework-res.apk file. Open up that file, you will see the same res\drawable folders.
11. Also open up the framework-res.apk from the base theme in the other 7zip as well. And overwrite the images just like the other apks making sure not to overwrite any xmls.
12. Back out of that back into the framework folder itself, if there is a services.jar in the theme than you will want to use overwrite that file as well.
13. Back out of the framework folder, If there is a fonts folder in the theme, You will want to overwrite those files as well.
14. Now you are done modifying your base theme with all the images from the theme.
15. You can now close the themed 7zip that you downloaded and leave open the 7zip containing you newly modified apks. Create a folder on your desktop called "system". Inside that, create a folder called "app", "framework", and "fonts"
16. Move only the modified apks that you replaced images in into the correct folders in your new system folder.
17. Make an androidupdate.tar with 7zip out of your new system folder and you are ready to flash it using nomorootfs method.
Tips:
Using the shift button to highlight mutiple images saves time.
Using the ctrl button to highlight images with xmls between them aaves time.
Switching views to have all images at the top and xmls at the bottom saves time.
If i forgot steps, I appologize.
Excellent guide.
The only thing I would mention is that most of the time services.jar is specific to a particular rom and as such may not work correctly with the target rom. As services.jar really only contains themed elements for the titlebar, you are better off using colorChanger's, apkTool or a hex editior to manually change the titlebar colors.
Also, in some cases (Like ProLauncher) the apk's must be signed. I prefer to use the test keys and this handy context menu here.
simple direct and effective. thanks again for all you do sir.
myn said:
Excellent guide.
The only thing I would mention is that most of the time services.jar is specific to a particular rom and as such may not work correctly with the target rom. As services.jar really only contains themed elements for the titlebar, you are better off using colorChanger's, apkTool or a hex editior to manually change the titlebar colors.
Also, in some cases (Like ProLauncher) the apk's must be signed. I prefer to use the test keys and this handy context menu here.
Click to expand...
Click to collapse
Thanks for the info man.
BTW, HAPPY BIRTHDAY MYN
Dzo Odex sample with standard theme
Thanks for this info. This will help a million. Could you also put light on how to odex it?
Eg: Dzo's odexed sample of donut has plastic theme, can it be changed to a standard android theme using the steps above and then odex it to create a androidinstall.tar?
Nice guide.
Thanks for making this.
Ill probably start trying to theme when i finish school in 2 weeks or so.
how to convert hdpi to mdpi
[Guide] Learn To Theme Part 1: Everything you need to get started
So you want to theme android.
Don't know where to start.
This should help.
***This is written going in step with editing a theme for the Samsung Epic 4g, but the principle can be applied to any android phone, granted there will be differences in phones***
First off you are going to need the basic tools:
7zip - http://www.7zip.com
Gimp - http://www.gimp.org/downloads/
Second off you need a general understanding of what you are about to do.
The majority of files you are going to edit will be found within framework-res.apk. This is a file located inside of the folders system/framework inside of a rom. A rom of course is a collection of files which combines into your operating system.
To get to the framework-res.apk file you will need 7zip, it's like winzip but is real quick for themeing.
http://www.7-zip.org/download.html
7zip will see any file named *.apk as a file named *.zip. With WinRar, Winzip, and others you have to rename the apk file .zip edit it, and rename it back to .apk. With 7zip this is not necessary. All you have to do is right click a file and choose 7zip-Open archive.
So you have your rom downloaded onto your desktop or in a folder you set up as the root of your themeing.
On my PC I have a folder inside of User/Documents/ called Themes
I also theme for the Samsung Moment so I have all my themes labeled inside of there:
(My folder looks as follows)
Epic Green Mayan Theme
DE03 Stock Theme Template
DI18 Stock Theme Template
Epic Files
Pink Life Moment
Pink Life Epic
Mayan Green Moment
Epic Black Hole
First and foremost, you really need a Stock *** Theme Template. *** being whatever version your phone is running.
The stock theme template serves a number of purposes. First, it is deodexed. This means that all of the files in system/ and system/framework that have the .odex extention are deleted and the stock apps that are included on your phone by default are replaced with files that have been full deodexed files.
This is essential for themeing because if they weren't deodexed, either your apps would ForceClose when you reboot after themeing or they will dissappear from your laucher tray and desktop, meaning essential they are deleted by the phone.
Another good thing about a stock theme template is that it deodexes your phone from an update zip so you can theme the stock rom your running instead of having to install another rom simply to apply a theme.
Download your stock theme template for the Epic 4G here for EC05
http://forum.xda-developers.com/showthread.php?t=1042386
So lets begin here.
Open your folder on your PC that holds your theme. For me it will be Users/Documents/Themes/NewTheme
Inside of that folder (COPY) your stock theme template to this folder. You will want an original theme template to remain inside of it's own folder cause obviously you are going to edit the one inside of New Theme folder.
Stock_DI18_Theme_Template.zip
Now rename stock_DI18_Theme_Template.zip to the name of your new theme.
NewTheme.zip
Now right click the .zip file and choose 7zip-Open Archive.
Double Click on the folder labeled "system" to Open it.
Double Click on the folder labeled "framework" to Open it
Here you will notice several files including one called framework-res.apk.
Inside your theme folder /Themes/New Theme/ create another folder called framework.
Drag and drop the file framework-res.apk into the framework folder.
Right click on framework-res.apk and choose 7zip-Open Archive.
Double click on the folder labeled "res"
Now you will notice several folders. On the Epic 4g the main one you want is called Drawable-Hdpi
Drag and drop this folder into the same folder you created called framework.
Open this folder and browse around. There are many images in here that your phone pulls in various locations. The first thing I like to do doing this on a new phone is to play with my phone and at the same time look in this folder and try to locate the same files I'm looking on the phone itself. You'll begin to see similarities inside of the drawable-hdpi folder for instance files that begin with the label sys_stat_*_* usually show up in your status bar. The rest you will learn over time.
You will also come across two main file types. The first is .png and the second is .9.png. This write up will not cover those, coming in the future.
A popular start for most people is wanting to alter the status bar. This is an easy one or so it seems.
navigate into the drawable-hdpi inside of the framework folder located /Themes/NewThemes/framework
scroll down until you find a file named status_bar_background.9.png
Since it's a .9.png you already know we can't edit it yet. The reason is the .9.png files are pictures that might hold more then one place on the phone and most probably will be portrait and landscape. The status bar is one size on portrait mode, but when you flip your phone into landscape, it has to stretch to fit the screens. In order to stretch a picture and retain it's looks, a tool called draw9patch in the android sdk is used to show you your image in 3 different stretch modes. Your goal is to set the guidlines on what must be retained at each zoom. After you add these guidlines on the picture, they show up in the picture. You have to program the guidelines inside of the picture and remove them from being displayed. That is done by a program called Eclipse. (Use version 3.5) But all this will come into play later don't rush out and get confused because familiarizing yourself the basic pictures and colors found in framework-res.apk is your current goal. Just because you have no idea what you are doing with the .9.png files doesn't mean you can't change the color of the status bar though. The next best thing is to "borrow" one from a theme that exists so you can get a feel for modding some files. The only one you can't use from another theme is the clear status bar. That has to be done in xml files as well and for now were sticking to the basics. Here's what you do. Find the theme that holds the status bar you like. To make sure you preserve all the files the way they need to be it's best to make a whole new folder in the theme folder called whatever theme you plan to use as a donor /Themes/Donor Theme/. Open the theme zip with 7zip open archive. Navigate to res (double click) and framework. Make another folder inside /donor theme/ called framework. Drag and drop the framework-res.apk. Open this file in 7zip and drag and drop drawable-hdpi into the framework folder. Now open it and scroll down to the status_bar_background you intend to borrow. (Right about now it's not wize to have your windows of "my computer" open full screen you can do this a lot easier with two open explorers side by side swapping files). Side by side, open the drawable-hdpi folders in both theme folders, /New Theme/ and /Donor Theme/. Drag the status bar from the donor theme into the folder for the new theme. Microsoft will give you **** about it choose copy and replace and your done. Now to get this change back in the theme is pretty easy. Your drawable-hdpi folder inside /Themes/New Theme/framework is where you will alter the pictures, framework-res.apk is where your going to put it. In your framework folder is the original framework-res.apk If you closed the instance of 7zip where you had framework-res.apk for new theme open, you need to right click and re-open it. Double click on /res and open it. Drag and drop the drawable-hdpi into the open archive NewTheme.zip where all the other drawable folders are. Make sure not to copy it IN one of those other drawable folders. It will overwrite the one thats already there automatically. Now, you have to stick that framework-res.apk back into NewTheme.zip before your ready to flash it from recovery. First close the 7zip instance of framework-res.apk. Right click and open NewTheme.zip double click on system/framework/. Now drag and drop the framework-res.apk from /New Theme/framework into NewTheme.zip. Your done, now flash the NewTheme.zip in recovery and see how it worked.
Any other file you choose to edit, the steps will be the same. Edit the image in drawable-hdpi, drag it into framework-res.apk, drag framework-res.apk into the theme /res/framework/ folder. You will be doing this a lot.
That's it for part 1. This will give you enough to play with and familiarize you with the images used by most any android phone. If this were a samsung moment you would be doing all of this editing inside the same file structure except in framework-res.apk /res folder you would be editing a folder called drawable-mpdi.
Part two will be out soon enough. I'll go more in dept inside the framework-res.apk/twframework-res.apk
[Guide] Learning to Theme: Required Tools
How To Theme
Required Tools
First off this is the very 1st guide in my line of theme guides. This one is just to reference you to the required tools, and instructions on how to set them up since it can be a little tricky. The link at the bottom is for guide 1, what to do with these tools now that you have them. At the bottom of that guide is link to a two part Putting the tools to use covering editing images in framework and .9.png files.
Grab you some tools:
Gimp:
www.gimp.org
7zip:
http://www.7-zip.org/download.html
Java6:
http://www.oracle.com/technetwork/java/javase/downloads/index.html
scroll down and select (under Java Platform, Standard Edition, JDK 6 Update 22) Download JDK
Download and install with the on screen instructions.
Android SDK:
http://developer.android.com/sdk/installing.html
Notice the instructions on Step 2. Downloading the SDK Starter Package.
It says "On Windows, right-click on My Computer, and select Properties. Under the Advanced tab, hit the Environment Variables button, and in the dialog that comes up, double-click on Path (under System Variables). Add the full path to the tools/ directory to the path."
This means if you extracted the folder called android-sdk-windows inside the zip you downloaded @ C:\android-sdk-windows, then when you go to add the path (there will already be other values in your path, type a ";" behind the last one and type in c:\android-sdk-windows\tools
this means you can call any of those scripts inside of android-sdk-windows\tools by typing them at the c:\ in command prompt.
For example, if you did not do this, and you wanted to use adb, you have to open the command prompt and type the following
C:\>
C:\>cd android-sdk-windows\tools
C:\android-sdk-windows\tools>
C:\android-sdk-windows\tools>adb ***
After adding the tools folder to path you can do the following
C:\>
C:\>adb ***
APK Manager 4.9 (Latest Version):
http://forum.xda-developers.com/showthread.php?t=695701
There is a video on the page as well to give you an overview of how to work it.
I downloaded the zip, created a folder at the c:\ drive called apk manager. Opened the archive (apkmanager4.9.zip) highlighted all the folders and the bat file, drag and dropped them into the folder located at C:\apk manager\.
Eclipse 3.5:
http://www.eclipse.org/downloads/packages/release/galileo/r
This is called Eclipse galileo download the one called Eclipse Classic
Once again you extract this file into a folder on your computer like you did with APK Manager. I created the folder @ C:\eclipse\
Now navigate to this website to learn how to add the adroid sdk into eclipse to have it ready when we are going to need it.
http://developer.android.com/sdk/installing.html
Note the android SDK download at the top, you should already have this. Read right below where it instructs you to add that into eclipse.
Start out like this. Open Eclipse now that it is installed. It's the icon in the eclipse folder that looks like a purple planet. With Eclipse open on your screen click on Window in the tool bar at the top. Click on Help-Install new software. The box that appears, it says "type or select a site" ignore this text input box and go straight to click "Add" button. When it comes up name it Eclipse Plugins and in the field where you put the web address, type the following: https://dl-ssl.google.com/android/eclipse/ . Click on the box next to developers tools and click next at the bottom. This will install what is called Android SDK and AVD Manager. Eclipse will probably need to restart to add the plugin to the menu list. Alternatively, if you get errors doing this there is a problem with you computer connecting to the secure server (in the web address you typed https: note the S at the end. If, for any reason you do get errors, simply go back to Help-Install New Software, and this time put in the web address field http://dl-ssl.google.com/android/eclipse/ When eclipse opens back up, click on Window and select "Android SDK and AVD Manager". Now your screen should look like the pictures in the link.
Now Eclipse Should be upgraded.
After following this all the software should be installed to work on themes.
Next Guide Below
Click My thanks button below
Meta Morph tutorial
by Dreamsforgotten
This is a primer in using MetaMorph on the Samsung Epic, at the time of writing I'm using a froyo leak with the Bonsai 2.0.1 rom so MetaMorph being a little buggy for us now will probably clear up when official is out. The bottom of the guide addresses what I'm talking about.
Create a folder on your desktop. Call it froyo (or whatever).
Inside that folder make one called framework-res (don't put the .apk)
Inside that folder put the folders you need to edit example
If I want to change the images in drawable-hdpi, make the folders like this
froyo/framework-res/res/drawable-hdpi
so inside the froyo folder create "framework-res". Inside framework-res create "res". Inside res create "drawable-hdpi". It follows the same structure as apk manager when you decompile. If you want to edit the styles.xml, that gets recompiled into resources.arsc. If you are in apk manager and you goto projects, you'll see unsignededitedframework-res, open it and right inside you'll see resources.arsc, androidmanifest.xml, res, meta inf, etc. So to MetaMorph the resources.arsc, your NEW resources.arsc goes into
froyo/framework-res/
Do this for any .jar or .apk file, create your folder structure and put only the new files into the folder, you don't have to flash an entire drawable-hdpi folder only the files you are changing.
Next thing you need to do is make a xml file that tells metamorph what files your editing and links the folders you created to that file. Do that like this:
Inside the froyo folder, create a text file. Either open Notepad and save the file into this folder or right click choose new file, text file. Set your .xml file up like this:
<?xml version="1.0"?>
<themename>Crystalline Froyo</themename> <--You can call this whatever
<themeversion>2.1</themeversion> <--Number that whatever number you want
<screenshot></screenshot> <--include a screenshot if you like. put the screen in /froyo and type the file name here
<author>Dreamsforgotten</author> <--your name
<authorweblink>http://forum.xda-developers.com/member.php?u=2551535</authorweblink>
<phone>Samsung Epic</phone>
<rom>Bonsai 2.0.1</rom>
<themedescription>UI Improvements for Crystalline Froyo</themedescription>
<item>framework-res.apk</item>
<path>/system/framework/</path>
<description>**** a Reboot Required</description>
Now the line right above this <item, path, description> You have to follow this for any folder your updating. Notice in the <item> space, you put the actual apk name being edited. So here I have <item>framework-res.apk</item> This tells metamorph to put your edits from the folder you named framework-res into framework-res.apk in the same structure as you set up, ie /res/drawable-hdpi or /res/anim whatever it is you might be editing. It's that simple. Now say you wanted to theme the market. You can use metamorph to theme system apps, but NOT market apps!!!!!! You would do this
<item>vending.apk</item> <--name of APK
<path>/system/app/</path <--path to the APK
<description>Market Update</item> <--whatever you like for descripton
You would put somewhere inside the xml as well. You can put the instructions for MetaMorph to flash in any order you like, You can theme apks first, framework-res first, however you like, BUT its good practice to put the framework-res last because it causes a reboot and anything behind it won't flash. Samsung devices pay attention, TWframework-res and framework-res both require a reboot, so you have to have two separate metamorph zips.
Now, moving along. You have your xml file with all the fields written properly, you have your folder structure set up you just need to do two more things. Inside your original froyo folder on your PC, create a blank text file. Name it .nomedia that (dot).nomedia don't forget the period. This tells media scanner not to add all your images from this zip into your gallery. It's very important. Now the final step, zipping it all up to flash. Whatever you chose to name that xml file for example I used this on the last one I created. crystalline2.1.xml This was the name of my theme control file (the .xml file inside of froyo) so your zip file HAS to be named the same exact thing. If your xml is theme.xml, then your zip has to be theme.zip. If your xml file is theme1.2.xml then your zip file has to be theme.1.2.zip. It will error if the zip and xml file don't match. That's it copy it to your SD card under AndroidThemes, open MetaMorph and apply!
Keep in mind MetaMorph has a 500 file limit and gets buggy when you push it toward the 500 mark. Break large themes into 2-3 different files if you must. You already have to have two separate flashes for our two frameworks on the Epic so you might as well split the images between the two anyway.
One last note on MetaMorph on the Epic. I'm using the latest and I noticed sometimes you open it and it closes right back, or you go to extract a new theme and it closes. Seems that the free version has issues with displaying the ads (which could be due to the host file on Bonsia I'm running, not sure, but when you open MetaMorph, give it time for the ads to load before hitting the start checks button. If the ads at the top and bottom of the app don't load soon, and it doesn't close on its own, proceed. If you give it time for the ads to load and it crashes, just open it right back up. Sometimes it takes me 2-3 times opening MM to get it to stay on the screen but after it does, the flash goes smooth every time.
[GUIDE] Learning to Theme: Putting the tools to use
APK Manager:
This is one of my favorite programs it makes the whole process smoother imo.
Navigate your harddrive to c:\apk manager\ or wherever you extracted the progam to.
Grab the framework-res.apk from a theme template/rom/etc.. and drop it in the folder called "place here for modding"
Double click on Script.bat. Leave the apk manager window with the folders (where Script.bat is) open.
Look into the second section called "Advanced tasks Such As Code Editing
Type "9" to decompile apk
Immediately type 11 to recompile apk (This step is because I have ran across framework-res.apk's before that wouldn't recompile even if no changes were made and this could save you some time down the road.
Minimize the window, Maximize the apk manager window
Open the folder called projects
Open the folder called framework-res.apk
Open the folder called res
Here is where there are plenty of files you can edit. These are the XML files that control the look and behavior of android. If you are lost at this point, lets work on a file together to get the feel for what is possible in here. Scroll down and click on the folder called "values" and open it. Inside you will find a file called colors.xml. Right click on the file and choose open with and choose notepad if you have nothing else that works as a basic text editor. Me personally, I use Notepad++. It's a free download. Either way once it is opened, you will see many values that look like this:
(This is not stock Epic colors.xml file so don't be confused)
#ffb97f7d
#ffffffff
#ff000000
#00000000
#ff000000
#ffffffff
These are text colors for your primary and secondary text on your phone, as well as background highlight colors.
Note Background_dark background_light. That is the background color so if it is the same as your text colors you won't be able to see the text. I made this mistake before so you can change every text color in this file but leave the backgrounds alone, or use a color your text will show up on.
#ffb97f7d
#ffb97f7d
#ffb97f7d
#ff64917d
#ff64917d
#ff64917d
#ff64917d
#ff808080
Here, the color name=" describes the text, the "#ffb97f7d" is actual code for the color.
So if you want to change this color, where do you get the codes from?
Easiest way for me is to use the color chooser in Gimp, when you pick a color, either background or foreground, it will show you the hex value on the screen. But remember that the color codes Gimp gives you hold 6 places ie #000000. The values in the xml files hold 8, so when you compile there will be an error. That is because the first two places describe transparency. You need to add "FF" in front of any value you get from Gimp. So if the code in Gimp is 000000 in the xml file you need to put #ff000000. Always start the code with a "#".
Now the question is what text is described by dim_foreground_dark? Two ways to find out. Change it, compile it, flash it. Or dig around the "out" folder in apk manager and look for text xmls. The next one is located in /apk manager/projects/framework-res.apk/res/color
You will see primay_text_(dark)(dark_disable_only)(dark_focused)(dark_nodisable)(light)(light_disable_only)(light_focused)(light_nodisable)
Search_url_text
secondary_text_(dark)(dark_nodisable)(light)(light_nodisable)
tab_indicator_(text)(textv4)
and a few more. You can open each of these xml files and see what's inside. We'll use primary_text_dark.xml as an example. Right click and edit with notepad++
Take a look at this line in the code:
android:color=" (this tells the xml what color to display. The @color tells where to pull the value from. So you either find color.xml like we did above and edit the field bright_foreground_dark_disabled to render the color your after, or you can simply put the hex color code right here bypassing the need to look up @color(color.xml). It would look like this if you did that. and the "#ff000000" would give this text color the value of black. Instead if you had used the color "#ffffffff" you would get the color white.
Here note android:color in the code. That's because some of the values are for text, and some are for background. In the text lines elsewhere, as seen below, we will use android:textColor instead.
Now this is all general text colors. If you want to edit status bar text, both in the status bar, and when it's expanded, you'll need to dig in a different folder. Navigate to this folder in apk manager on your c:\ drive. C:\apk manager\projects\framework-res.apk\res\layout. You are looking for the following file called status_bar.xml.
Keep in mind when your looking through these xml files, you will see this value in a lot of fields "android:id="@id/icons" or something similar. These are keys to what you are editing. The first line you might want to edit in status_bar.xml would be line #13 which looks like this:
The only thing that's important on this line is @id/tickerText which tells you a color value here would let you change the color of the ticker text. The ticker text is the text that pops up in the status bar for things like a text message being recieved, and if your phone is set that way, the content of your text message.
There is just one problem here. In most lines where you can edit color you will see this already in the line android:textColor="********" and that value is NOT in the ticker text line. But being that this is a text view line because the id is ticker text, you can add the value android:textColor in right before the words "android:id=". The edited line will look like this:
Learn To Theme Putting The Tools To Use Part 2 .9.pngs
We are going to walk through editing a .9 file and getting it back in place to do this as you read the guide.
Before you begin, check out this video from fxn
http://www.youtube.com/watch?v=KNvGgmJDqPQ
Now the guide will get you lined up with the instructions in the video.
Open "my computer" and navigate to C:\apk manager\.
In another window open C:\*\Documents\Themes\
Browse to the folder in Themes that holds your theme template
Right click and Browse your stock di18 theme template or rom.
Navigate to system/framework/
In your apk manager window, open the folder called place here for modding
Click and hold framework-res.apk in your second window which is the 7zip browing the zip file.
Drag the apk into place here for modding folder.
Now you can close the zip file window.
Back out of the place here for modding window and you should be back in the apk manager folder.
Run Script.bat and choose the option "9" and hit enter.
Click open the folder called projects
Click open the folder named framework-res.apk
Click open the folder named drawable-hdpi.
Find the file icon_highlight_rectangle.9.png Pay attention to the screen while your scrolling. Apk manager decompiled all the .9.png files exposing the lines that were used in draw9patch by default.
Right Click the file and choose edit with gimp.
Now in gimp you will see the picture, and the lines drawn in for draw9patch. This will save you time. Edit the picture as you see fit. Change the color, or completely redesign the image. Then when you goto save it, choose file save as. Keep the same file name but save it on your desktop, creating another folder naming it new theme nine files. Save the image.
Open up Eclipse.
Click on file-new-android project
When it Opens, click in the field named Project Name type "nine files"
In the field called "Built Target", choose Android 1.5, click the check box next to it.
In the field called "Application Name" type "ninefiles"
In the field called "Package Name" type "com.example.ninefiles"
No Quotes in any field.
Uncheck the box labeled "Create Activity".
Now your Workspace should be open in eclipse, and on the left pane there should be a folder labeled ninefiles. Double click on it and it will expand a folder tree. Look for res. Then click it if it's not expanded as well. Look for drawable. There will be a file in there called icon.png. Leave that file alone. Now on your desktop, open the folder called new theme nines. Click, drag and drop the edited icon_highlight_rectangle.9 file right into that drawable folder in eclipse. You are skipping using draw9patch because the lines were there from the start.
Now go back to the parent folder in Eclipse, the one labaled ninefiles where all the other folders come from. Right click on it and choose android tools all the way near the bottom. Then slide over and choose export unsigned application. This will bring up the save prompt on your screen, choose the desktop once again, and export it. It will show a message about the export and telling you to zip align it and sign it with a device key. Ignore all this, your just using Eclipse to target that .9.png. Keep in mind every time you open Eclipse now, it will show you the workspace with ninefiles. Expand the folders, delete the last image you used Eclipse to work on and add new ones in, bypassing the need to create a new android project each time.
Lets say your new .9.png image is nothing like the original and it won't display correctly using the lines on it after decompiling in apk manager. You need to feed the image through draw9patch.bat located in c:\android-sdk-windows\tools\
Double click it and a shell will open, then another one will open on top of it that has a square with a down arrow in it. Save your image from gimp into the folder on the desktop called new theme nines, like you did above. Then Drag and drop the saved image on top of the windows inside the square, and on top the arrow lol.
The picture will be transformed in draw9patch concentrate on the outer edges along the entire image. Bring your mouse over to the left of image around dead center. Click once and draw a pixel. Next go dead center on the top just like you did on the left and draw the 1 pixel. Now expand that line up and down on the left side looking at your 3 preview pictures on your right hand side. If there is no gradient or fade effect to your image the center pixel will be about good enough but if your image fades, expand that line up and down and your 3 previews will give you an idea if you capture it or not. Once you have the left side of the image looking good, begin the same process on the top. Use as little line as possible to have the image looking right. Never have a gap in the line that you draw.
Now focus on the right side and the bottom. The two lines drawn there should be about the size of the entire image minus a few pixels at the very end. You can get the idea from the one you pulled from apk manager and adjust the lines to work on your changes. When your done with draw9patch, click file save 9 patch. It will save in the folder on your desktop. Now drag and drop this image into the drawable folder of Eclipse/ninefiles as described above.
This should be a shortcut to getting you busy with 9 files. Any questions or anything noticed missing, please let me know.
One last bit of advice. Sometimes when you open a file in draw9patch, the image is zoomed in too big and you can't get to the outer edges to draw the top and bottom lines. There is a bar at the bottom of the program that will allow you to zoom in and out of the main image and zoom in more to the 3 preview images. Use these to adjust the image to where you can work with them.
All these introduction guides should get you started, your own drive should take you the rest of the way. I'm not the first to write a theme guide I'm just sharing with the Epic community because the amount of new users who are requesting how to do these things. All my information came from asking questions to those that were theming before me like Khanning, Crake, Chibucks, the list is never ending. Also this list of videos here have helped a lot:
http://forum.xda-developers.com/showthread.php?t=593932
.9.pgn write up posted.
Just AMAZING thank you so very much...
No problem I hope I wrote it so anyone starting fresh could understand
rjmjr69 said:
Just AMAZING thank you so very much...
Click to expand...
Click to collapse
Do as thou wilt be the whole of the law
I'm really digging these guides as I really want to get into theming and eventually (with any luck!) cooking ROMs. i'm a self made techie and pick things up pretty quick, so I thought theming was a good place to start off.
any chance you'd consider a writeup on extracting a theme from a themed ROM, pitfuls and things to know/watch out for etc... i think that would be a helpful supplement to see how themes are implemented in ROMs and know what certain files affect. maybe even a list of what parts of a theme/ROM are in what files (such as lockscreen i think is android.policy.jar etc...)
thanks again for your time and effort into putting this out there
No doubt, there is definitely more write ups to be done my goal was to get some guides out that just touch on the basics so people who never tried before can begin to get their get wet.
Do as thou wilt be the whole of the law
hey so i wanted to come back and thank you again for these. i've read but havent dived into editing .9.pngs just yet, but i've really been playing with the rest of the stuff to mostly modify existing themes that i like most of, tweaking a bit. its really cool and i cant wait to actually start putting some of my own stuff together. i know the threads havent gotten a lot of love but its appreciated!
Hey, this is amazing, thx so much for it.
I'm running into a prob and wondered if you could assist.
I've already modded (only replaced/changed some png colors on photoshop), and have flashed it successfully to my phone with no problems. However, when I pull the framework res back out, decompile (with no problems), then try to recompile immediately (as instructed), that part seems to fail. It errors, then asks if it is a system apk (yes?)...then creates a temp folder and asks me to delete the resource.asc if I've modded an xml. Even though it errors, I made a change to the strings xml, compiled, with same error, then signed and flashed- it seems to work fine, but the change I made to the xml didn't hold.
any ideas or suggestions?
Thx again so much.
sent from my RAZR
decalex said:
Hey, this is amazing, thx so much for it.
I'm running into a prob and wondered if you could assist.
I've already modded (only replaced/changed some png colors on photoshop), and have flashed it successfully to my phone with no problems. However, when I pull the framework res back out, decompile (with no problems), then try to recompile immediately (as instructed), that part seems to fail. It errors, then asks if it is a system apk (yes?)...then creates a temp folder and asks me to delete the resource.asc if I've modded an xml. Even though it errors, I made a change to the strings xml, compiled, with same error, then signed and flashed- it seems to work fine, but the change I made to the xml didn't hold.
any ideas or suggestions?
Thx again so much.
sent from my RAZR
Click to expand...
Click to collapse
i "think" thats because you are recompiling edited images. i think thats what he mentions elsewhere in these threads, always compile with stock images, then drag and drop your edited images. so you probably want to start with a stock framework, not one that already has edited images in it. i'm learning too though so dont quote me.
EDIT: hey dreamsforgotten, getting an error exporting: Failed to export NineFiles: C:\eclipse_workspace\Nine Files\bin\NineFiles.apk doesn't exist!
EDIT2: looks like somehow my ADB got wiped out from the tools folder so Eclipse couldnt find it, reinstalled, pointed to it in Eclipse preferences, works like a charm.
I think you are correct.. Ive just gotten so far away away from the original.. On my (own) 5th revision . That's cool though. I did try decompiling and re compiling immediately on an untouched framework, and it did in fact work.
sent from my RAZR
hey i was wondering if you have already posted your 2nd tutorial? If not is there going to be one anytime soon?
dreamsforgotten said:
Where do you go from here?
http://forum.xda-developers.com/showthread.php?t=817998
Click to expand...
Click to collapse
see above bro! each one has a link to the next, if your a little tech savvy they should be enough to get you started, i learned off of them so if you have any questions feel free to ask!
useruser25 said:
hey i was wondering if you have already posted your 2nd tutorial? If not is there going to be one anytime soon?
Click to expand...
Click to collapse
Noob Questions- I'm new to theming but i catch on very quick. I just have a few questions tho..I'm running on the Midnight ROM (CWM3)..I like the DK28 Gingerbread Theme 1.8 but would like to change the text colors a lil..So I Decomplied and recompile with zero errors..i ended up with a smaller file and it was named unsignedframework-res.apk..So i changed the name to framework-res.apk and put it back into the DK28 Gingerbread Theme zip so that i could flash it..I tryd to flash it in CWM3 but it told me it was aborted bc it was a bad file..so my two questions are how to get a theme to be CWM3 compatible and what im a doing wrong when it comes to decompiling and recompiling? Any advice would be greatly appreciated Thanks in advance
Noob Questions- I'm new to theming but i catch on very quick. I just have a few questions tho..I'm running on the Midnight ROM (CWM3)..I like the DK28 Gingerbread Theme 1.8 but would like to change the text colors a lil..So I Decomplied and recompile with zero errors..i ended up with a smaller file and it was named unsignedframework-res.apk..So i changed the name to framework-res.apk and put it back into the DK28 Gingerbread Theme zip so that i could flash it..I tryd to flash it in CWM3 but it told me it was aborted bc it was a bad file..so my two questions are how to get a theme to be CWM3 compatible and what im a doing wrong when it comes to decompiling and recompiling? Any advice would be greatly appreciated Thanks in advance
I haven't made a cwm3 zip yet but for a short cut you can find a theme created for it and copy the files from your theme in leaving the meta inf folder alone. I've noticed in the past as well when I recompile the file gets smaller and smaller according to the pc but that end up flashing all the same. Hope that helps.
Sent from my SPH-D700 using Tapatalk
chris378 said:
Noob Questions- I'm new to theming but i catch on very quick. I just have a few questions tho..I'm running on the Midnight ROM (CWM3)..I like the DK28 Gingerbread Theme 1.8 but would like to change the text colors a lil..So I Decomplied and recompile with zero errors..i ended up with a smaller file and it was named unsignedframework-res.apk..So i changed the name to framework-res.apk and put it back into the DK28 Gingerbread Theme zip so that i could flash it..I tryd to flash it in CWM3 but it told me it was aborted bc it was a bad file..so my two questions are how to get a theme to be CWM3 compatible and what im a doing wrong when it comes to decompiling and recompiling? Any advice would be greatly appreciated Thanks in advance
Click to expand...
Click to collapse
You can't decompile and recompile a framework with different images. The .9s will show funny
You need a edify script for cwm 3
Sent From Da Hood.
All mods are at the bottom of this post.
Here is a simple way to change system icons on your application drawer. I was looking for a guide to do this but I couldn't find any so I gave it a try and it worked. So I decided to post the method here for like minded people who wanted to change the system icons in their app drawer and not only on the homescreen.
I will show an example of changing the contacts icon. To change the icons of some other app you just have to pull the relevant apk. I know this looks long and tiresome but bear with me and the results will amaze you. After a few times it becomes really easyYou have to be rooted to do this
A couple of things to note
a. You can change icons in framework-res.apk, SystemUI.apk or any other apk this way too.
b. Please note that the icons you replace should be of the same dimensions.
c. The specific icons name inside the drawable_hdpi might change. Sometimes its icon.png. Sometimes its ic_launcher_XYZ. Just use your head and replace the correct png.
d. The files are located either in system/app or data/app depending on whether its a system file or a data file. System files have to be pushed. Data files have to be installed.
Changing Icons works for all ROMS
1. Download android-sdk from here http://developer.android.com/sdk/index.html
2. Install all libraries.
3. Install jdk from here http://www.oracle.com/technetwork/java/javase/downloads/index.html
Make sure you download jdk and not just jre.
4. Download apk manager from here http://forum.xda-developers.com/showthread.php?t=695701
5. extract apk manager inside platform-tools inside android-sdk folder. Should be something like this
C:/Android-sdk/windows/platform-tools/("extract apk manager here")
-----------------------------------------------------------------------------------------------------------------------------------
6. Open cmd
7. Navigate to the platform-tools folder. (Simple DOS commands)
8. Do "adb pull /system/app/HtcContacts.apk" (-Do this without the quotes. If you want to change the icon for, lets say the camera, then instead of HtcContacts.apk, type HTCCamera.apk. To see all the system files just navigate to system/app on your phone using es file explorer or root explorer or any other file explorer you fancy. You can see all the system apks and you can pull anyone you want)
9. Ok so now the HtcContacts.apk should be in the platform-tools folder. Paste it into the folder "place apk here for modding".
10. Start script.bat (apk manager) from the platform-tools folder.
11. Choose option 22 to select a project
12. Choose the number of the project. In this case it would be 1.
13. Choose one again on the next screen. This will extract the apk to the projects folder.
14. Now get to the folder res/drawable-hdpi/ on your windows explorer.
15. Replace people.png with the icon of your choice. Please remember that your new icon has to be of 72x72 dimension and should have the same name. You can also replace other pngs like dialer and stuff.
(Next step is only for system files)
-------------------------------------------------------------------------------------------------------------------------------------
16. Select option 3 on the apk manager cmd
17. Now select 8. This is a system apk and so we have to retain the system signature.
18. Enter the full path of the file ( system/app/HtcContacts.apk)
Follow these steps for data files
-------------------------------------------------------------------------------------------------------------------------------------
19. Select 7.
20. Wait for install.
Here are my mods. Please note that I have not made these icons and tweaks. I have just put them all together in one place. If you want to give any credit then please follow the developers.
These are designed for sense based Roms. Please DO NOT try with any other rom. Just download and push to system/framework/framework-res.apk. Please note : This is for the older sense (sense 2.0) Do not try with newer sense.
To get transparency you have to use this file -- Transparency Hack -- through metamorph. I will make this into a flashable zip once I understand how to do that.
App icons are from Tenuis theme - Images
My framework-res
Screenshot - http://img600.imageshack.us/img600/9167/snap20110125163003.png
Download
System Icons Zip
http://dl.dropbox.com/u/18171691/Mms.apk
Hello,i just use Bettercut.apk available from market .
Marcdu81 said:
Hello,i just use Bettercut.apk available from market .
Click to expand...
Click to collapse
Hi I dont use bettercut but does it let you change the system icons in the app drawer. you know the drawer that comes up when you press the menu on the launcher???
Edit: OK i just tried bettercut. Using this you cannot change system icons in the app drawer. You are only changing icons on the homescreen, basically shortcuts. You could do that with launcherpro, desktop visualizer and 10 other apps.
CREDITS
CREDITS
MultiCulti for giving me the idea to get the services.jar for transparency
Icons from MIUI framework
Icons from Gingerbread aosp ROM
sopL87 for his guide
he_stheone64 for his awesome transparency hack
Ps. tell me if I have forgotten to credit anyone and I will add your name here. Thanks to all of the above for inspiring and helping.
Good work
Check this out too:
http://forum.xda-developers.com/showthread.php?p=10157000
Simple Java app to edit .apk files with a nice GUI
You're Just Awesome THNX man !
Nice guide
Ninjamorph lets you edit and change out images within apk files right on your phone. Its a free app on the market.
Still a very nice guide though!
thanks .. i was just looking to put up something which you could use to edit any apk on your phone .. the thing with ninjamorph is that it wasn't working for me. And plus I prefer to do it this way. Gives me more area.
EDIT: Anyone wants to see an MIUI framework on your sense?? I am thinking about getting the exact MIUI framework over to our sense based ROMs. As you can see in my framework I have already copied some of the elements. I am thinking about getting the power toggles and removing the current apps from the notification pulldown.
hi could u help me to change the battery icon plzzzz
i know about kitchen. any thing else i have some pic of a battery icon but dont know how to make one..... htc desire hd rom runny 3.37
Can't extract file
I tried to put option 22 where project start. Then I enter the project name as 1 and following another option 1 to extract files. However, the CMD just close by itself and I opened the project file and still empty inside. Please help!!
Hello A little while ago I managed to learn how to theme totally from scratch. I knew nothing of anything before I started, but now I know how to port themes As I still see myself as a n00b there may be some weird things I've done, but at least I manage to create the themes This might not be the best way to theme, or the easiest, but it works
Overview PNGS
1) Getting the files
2) Getting the images
3) Port
4) Package and Sign
The only programs I've used is 7zip and autosigner download them and install 7zip and extract autosigner to a nice location for example your desktop
Getting the files
The first you need to do (after getting the programs) is to find the file you will mod (edit). This will mostly be the framework-res.apk because this decides most of looks of phone (for example the statusbar). Download the .zip of the rom your going to theme. Open it up (shouldn't require any programs, if does, use 7zip: either drag it onto the 7zip icon or right click and choose open with). Open system -> app and copy the framework-res.apk (or any other apk you would like to theme, for example the settings). Now paste it into an appropriate folder.
Getting the images
Now you need to find the images you want to use in your new theme. Find either an update.zip with a theme or an .apk with a theme chooser theme (if there is both a version for Froyo and GB, use the Froyo version as this will make it easier ) Open it up with 7zip (drag it into the 7zip icon). Now you can do either of two options:
1) You can take the whole drawable-mdpi folder and copy it out. You should probably don’t do this with a Themechooser apk, as they usually don’t have all icons in this folder, as they often lend a few from HDPI.
2) Take only the images you want and copy them to a folder. For example if you want the signal icons, copy the “stat_sys_signal_0” (-4 of course) and copy them out. If you want the statusbar background, copy “statusbar_background”. This way you can mix several themes, take the best of several themes and make your personal theme
When you’re done getting your icons, close the window.
Porting
Now open the Rom’s default framework-res.apk with 7-zip. If you’re going to port a whole theme, delete the /res/drawable-mdpi folder and copy in your own. If you’re going to port just a few icons, open the /res/drawable-mdpi folder and paste your icons. You might want to check if the icons have the same names in the different framework. For example the headset icons can be both “stat_sys_headset” and “stat_notify_headset”. Also if you port from a theme chooser theme, you will have to rename every single .png you port. This is really boring, but necessary. You need to remove the “framework_res” and the “android_systemui” from the beginning of all the names. So “framework_res_activity_title_bar.9.png” needs to be changed to “activity_title_bar.9.png”. Because this is so boring you better keep your renamed icons, so it’s easier to port it to another rom
This is kind of off-topic: my carrier lends network of another carrier. Therefor my phone is allways roaming. This puts a stupid “r” with my signal icons. To avoid this I allways take normal signal icons, copy them, and rename one of the two .pngs from for example “stat_sys_signal_1” to “stat_sys_r_signal_1”. This way I get rid of this stupid “r” and it will always show the normal icons
Packing and signing
Now the porting is done and the next job is to push the new framework to your phone. If you are familiar with adb, you can push it to system/framework on your phone. You don’t need to anything more with the apk before pushing it. Else you can create a flashable .zip for your theme. I’ve attached a .zip with update script (I haven’t created it. Just stole it from one of Elelinux’ add-ons ). Download the zip. Create a folder named system and a folder named framework. First drag the new, modded framework_res.apk to the framework folder, then drag the framework folder into the system folder, before you drag the system folder into the attached zip. If you use Clockworkmod recovery, you can just flash the zip right as it is, but if you use Amon_Ra or want it to be compatible with every recovery because you want to post it, you need to do something.
Unpack autosigner and launch the exe file inside. Drag the .zip into the new window and press sign. It will now appear a new file in the same folder as the file you wanted to sign. Its name is the same, but with “_signed” at the end. You can rename the file as you wish both before and after the signing.
XML Editing:
I decided to add a little section about XML editing as well I really don't know all about this myself, but i can tell how to set it up and some examples to what you can do Even though this may seem really complicated, it's not written in a completely different language, like Java in the smali files, so often it is possible to use logic to get what you want
Tools needed: APK Multi-tool. as well as Java, if you don't have it installed.
Overview:
1) Setting up
2) Examples
3) Finish
Settings up
Download APK Multi-tool and extract/ unzip it to wherever you want ( I have it on my desktop). Now you can place the apk you want to modify (usually the framework_res.apk) in the "Place_apk_for_modding" folder. Then you open the script. If you don't get an error, proceed to b), if you do get an error proceed to a)
a)) If you do get an error where it says something like "java not found" you need to correct the Java path (or install Java if you haven't done that, which you should have) . I had to do this to get it working. First open my computer and click disk C, or D if you have installed Java there. Open programfiles (or whatever it's called in your language) and scroll to the Java folder. Now open the folder there jdk folder or whatever you have there and open the "bin" folder. Look at the top of your window, where it says where on you're computer you are (like Windows: C to the left, and then Programfiles and so on). Right click it and click copy address. Mine is "C:\Program Files\Java\jdk1.7.0_01\bin . Now you can close the window.
Open "My computer" again. On the top bar below the navigationbar, click Sytemoptions (sorry, not really sure what it's called in Englsih, as my computer is Norwegian, please correct me if I'm wrong). On the left click the "advanced" link and in the popup that appears click "environment variables". Scroll down to the "path" variable and edit it. Paste the address you copied and click OK. You should now be able to proceed to b). If you still get an error, please tell me and I'll try to help
b) type 25 and press enter to select current project. Here you will see all the apks in the "Place_apk_for_modding" folder. Select the appropriate number (in this case probably 1) and press enter to continue. Then you hit 9 and enter to decompile it. I cannot really explain it, but it enables you to edit the xmls in the apk. If you try to edit them by using 7Zip, the xmls will be just messed up. When it's done decompiling, you have gotten a new folder in the "projects" folder. In this case it is probably named framework_res.apk. Minimize the script (DON'T CLOSE IT) and you're ready to edit the xmls
Examples on edits:
COMING SOON
Finish:
When you're done editing, open the script again (remember what I said about not closing it? ). Click 11, unless you are editing a non system apk. If you are editing the framework or settings or such, use 11. If you get an error now, you have probably done something wrong, try to see in the log what you have done wrong. Every time I've had an error, I've ended up in bootloop when I've flashed, so it is probably better to just start over. Another tip is to do one thing at the time. For example: you decompile, edit the notification color in pulldown, compile. Take the compiled apk, decompile edit another thing and so on, this makes it easier to not mess up and it also shows what you are doing wrong.
On the "Is this a system apk?" you should probably say y, as I said above. I also usually copy over the files I didn't edit, as this seems safer. Follow the instructions and you should be fine. When you're done and the script is done compiling, you will find a unsigned_**** (for example unsigned_framework-res.apk) in the "place_apk_for_modding" folder. This is your modified apk, and you can try to push it to ur device with an update.zip or adb, if you know how to use that
Well this was the end of my guide for now If there's anything which is unclear or you have other suggestions, feel free to post I've probably forgotten something
Finally after all my attemps to modify the android framework before i have do it correctly. I have changed a couple of things, the lock screen and battery icons so far. The framework I'm modifying is the one on Ele's Gingerbread and i wonder how to get the battery icon percentage 1 by 1 as i saw in some other themes. What i mean is that in the original framework there is only battery icons for 15, 20, 25 and so on, and if i push the 16, 17, 18, 19 they won't work. Is Theme Chooser the one on charge of this? how can i get that? some help please?
(Also tryed to theme a sense rom, but everything was messed up, i guess because of sense or maybe I did something wrong)
So thanks for your guide, really helpfull
Yeah, I've never tried to theme Sense so I don't know. It is probably possible to make icons for every %, but then you'll have to decompile using APK tool, and it is harder. I don't know how. If you want to try, you could try asking a question here
thanks
so funny=))
i'm tried
Great guide helped me a lo thx.
Finally, someone who CAN explain it...
I'm now porting ICS to GB (no cm7), cause I think CM sucks.
mDroidd said:
Finally, someone who CAN explain it...
I'm now porting ICS to GB (no cm7), cause I think CM sucks.
Click to expand...
Click to collapse
Hmm, ICS themes can be made really awesome, if you do some more advanced stuff. For example you want to remap the pulldownbar a bit, and change som text colors. But to do this you need to use a tool like APK multi-tool, and it is a bit more advanced. If you want to, I can create a new section where I show how to this
Thank you.
GUIDE UPDATED! Added a section about XML editing really quick, probably forgotten something and such, so just ask if there is something you don't understand This is for those who are getting used to the PNG editing and want to proceed to something slightly more advanced, for example you 7Tosta
Cheers
BTW: I should've reserved the 2nd post, this is getting messy
Edit: If there's anything specific you want me to add to the EXAMPLES section, tell me
How To Theme TouchWiz Based ROM to look like AOSP!!
Ok guys I decided to share my theming method with you guys. This is mainly intended for all developers and or ROM developers!
If you have TouchWiz based ROM (Some devices below) you can theme it to have an AOSP feel to it.
Devices:
Galaxy SII
Galaxy SIII
Galaxy Note
Galaxy Note II (Tested by Me )
Some others as well...
Whats Needed:*APKTool DOWNLOAD HERE
*JAVA DOWNLAOD HERE
*7-ZIP DOWNLOAD HERE
*TouchWiz Base ROM
*SystemUI.apk (in system/app) **FROM TOUCHWIZ ROM**
*SystemUI.apk (in system/app) **FROM AOSP or CM10 ROM**
*Framework-res.apk and TWFramework-res.apk (in system/framework) **FROM TOUCHWIZ ROM**
*Zipalign tool
*Root Explorer App (Get from Google Play Store)
*Holo Launcher (Also get from Google Play Store)
Lets Get Started:Follow all of the steps below carefully and you should have an AOSP Themed TouchWiz ROM in no time
1. Download the Holo Launcher from the Google Play Store.
(When you run the launcher you will see that you will have an AOSP themed launcher and you will have AOSP system icons [messaging, phone, settings, ect..])
2. You need to install APKTool next. (If you already have this installed then skip this step)
*Download the APKtool files (link above)
*Put the files into your C drive. Make a folder in the root of your C drive called apktool.
*All of your files should go inside that folder (apktool)
*Go to CMD or Command Prompt and type in
Code:
cd C:\apktool
*That should redirect you to the apktool. If it worked then lets move on...
3. Get the framework-res.apk and TWFramework-res.apk (in system/framework) and place it in the apktool folder.
4. In the Command Prompt you will need to direct CMD to the APKtool folder. Then you must install the framework files by doing:
Code:
apktool if framework-res.apk
and
Code:
apktool if twframework-res.apk
Now your framework files are successfully installed. If you have an error in the CMD window then you must check your JAVA.
5. Now get your systemui.apk files from both AOSP (CM10) and TouchWiz ROM. Rename the AOSP systemui.apk to systemuiaosp.apk (so you dont get the touchwiz and aosp systemui's mixed up)
6. Make a backup of the TouchWiz systemui.apk in another folder called "Backup" ****YOU WILL NEED THIS LATER*****
7. Now you should have both systemuiaosp.apk and systemui.apk in the apktool folder. Now you must decompile both files by using these commands:
Code:
apktool d systemuiaosp.apk
and
Code:
aptkool d systemui.apk
You should have 2 more folders (systemuiaosp and systemui).
8. Here comes the actual theming of the systemui. Open both systemuiaosp and systemui folders side-by-side. And now you need to navigate to the drawable-xhdpi folder in both.
***FOLLOW THESE NEXT STEPS CAREFULLY OR YOU WILL HAVE AN ERROR***
9. Find the files you want to replace. They should all be PNG files. DO NOT JUST ADD PNG FILES FROM THE SYSTEMUIAOSP TO THE SYSTEMUI. YOU WILL GET ERRORS WHEN COMPILING THE FILE!! There are XML files (we will not edit in this tutorial) that use those PNG files with those extension names. So you can't just add files from one to another. For example:
If you have an icon you want to change but its only for that AOSP then it wont run on the TouchWiz. If you have a WiFi icon that has a name of AOSP_Wifi_1 and on the other systemui it says TOUCHWIZ_Wifi_1 you cant just delete the one that says TouchWIZ_WIFI_1 and replace it with the AOSP one. The XML files dont tell it to run the AOSP_WIFI_1. So you must ONLY REPLACE FILES WITH SAME EXTENSION NAME!!
10. You can go ahead and transfer files from the SystemuiAOSP to the systemui. Note what i said above!! If you have lets say 6 wifi icons for systemuiAOSP and 6 icons for systemui (touchwiz) you can rename the AOSP PNG files to match the TouchWiz ones so the XML files will know what to run.
I personally suggest only transferring Wifi Icons, Battery Icons, and Signal Icons. These are your most important ones to transfer! You can also transfer the Bluetooth and Airplane mode icons also.
11. After you have transfered the files over and you feel like you have done it correctly then you can go ahead and Compile the SystemUI folder by using this code:
Code:
apktool b systemui semidone.apk
12. If you did all the steps correctly above then apktool will build the apk file with no issues. If you have errors then you did not pay attention carefully. (You may want to try another CM10 ROM to get icons from).
13. Now here is where 7-Zip and your backup file comes into play. Open 7-Zip twice (2 windows). In the first window direct 7-zip to the semidone.apk file. And the second one to your backup file which should be SystemUI.apk (in the backup folder).
14. In the SystemUI.apk click on the RES folder and then find the Drawable-xhdpi folder. Delete the entire Drawable-xhdpi folder. Now in the other window (semidone.apk) go to RES and then transfer the entire Drawable-xhdpi folder into the SystemUI.apk window.
15. Now your SystemUI.apk in the Backup folder is your new modded one. But before you can use it you must zipalign it using any zipalign tools out there. I just use DSIxda's kitchen to do it since I make ROMs with it.
16. Now you can go ahead and transfer the SystemUI.apk onto your phone's SD card.
17. Download Root Explorer. Now go ahead and navigate to your SD card and click the SystemUI.apk file and then click copy or move. (whichever one you like).
18. Now navigate to your system/app folder and paste and overwrite the original one. (You will need to set root explorer to Read/Write). Now you can go ahead and reboot your device.
If you did everything correctly you should now have a themed launcher and a themed status bar with AOSP Icons!
I don't ask for donations so if this tutorial helped you then please hit that Thanks button!
MINE
Mine AGAIN
I was just looking for a thread like this... not sure if i have enough time and will to do it but i am very glad you post it!
thanks a lot!!!
ExcaliberX said:
I was just looking for a thread like this... not sure if i have enough time and will to do it but i am very glad you post it!
thanks a lot!!!
Click to expand...
Click to collapse
Your welcome. I hope it works for you!
So are there any screenshots showing exactly what changed? I'd like most of the UI to have an AOSP feel to it not just some parts. Does this theme all or just bits and pieces?
Shmi117 said:
So are there any screenshots showing exactly what changed? I'd like most of the UI to have an AOSP feel to it not just some parts. Does this theme all or just bits and pieces?
Click to expand...
Click to collapse
Well as said above it themes the launcher (holo) and the status bar icons are aosp.
thanks I was hoping to see where you find the blue background bars in the S2 in the settings menu SecSettings.apk or trframework or framework or systemUI I have looked everywhere and changed colors of .9pngs forever and it never phased them. obviously I never found the right one to change. would you happen to know and could you post here or pm me thanks. have a decent ROm that doesnt really need blue gray bars dominating the screen.