Hey,
So after updating the Xperia TX to JB, i have noticed that there is an issue with wifi connexions, meaning that the phone will no longer connect to some access points of software access points (connectify, virtual router, etc...). After entering WPA key, it just says connecting then goes back to previous state.
I fiddled a bit with this and finally compared wlan .ini files from ICS and JB.
If you are having the same problem, a small modification to the .ini file might solve the problem...well in my case it did.
Please note that you need root access to modify this file.
1) Mount system folder as writable using your file manager or root explorer
2) Navigate to /system/etc/firmware/wlan/prima
3) Make a backup of WCNSS_qcom_cfg.ini
4) Open WCNSS_qcom_cfg.ini and look for g11dSupportEnabled=1
5) Modify it to g11dSupportEnabled=0 and save the file
6) Power off your wifi and Power on again
7) Forget the SSID you've had issues to connect to and try to connect again
and you should be good to go.
To understand the g11dSupport property please refer to here - from wikipedia
if the above did not work, there is another property which has changed:
gEnableFWRssiMonitoring=1 in JB was gEnableFWRssiMonitoring=0 in ICS
You may wanna try that.
works on tx build .67
before i changed this damn 1 to 0 i couldn't connect to my wireless modem !
but now its ok.
tnx:good:
great it worked!! pressed thanks..
i tried with ex file manager, it couldnt save the script.. then used root browser.. did the trick..
if i unroot, i will loose this fix?
suhail.adil said:
great it worked!! pressed thanks..
i tried with ex file manager, it couldnt save the script.. then used root browser.. did the trick..
if i unroot, i will loose this fix?
Click to expand...
Click to collapse
Of course, not
It only revert back if you change ROM or reflash stock ROM
hi!
i do both of your way!
after change 1 to 0 (in both way) i saved my change! but when i check it again 1 is still there!!! i do with wifi on and also off!!!
saeed_karaj2000 said:
hi!
i do both of your way!
after change 1 to 0 (in both way) i saved my change! but when i check it again 1 is still there!!! i do with wifi on and also off!!!
Click to expand...
Click to collapse
Make sure you have root access and that system is mounted as R/W
If you have root, you can usually remount in your file manager application (File Manager or ES explorer). Check in settings
ravijokhun said:
Make sure you have root access and that system is mounted as R/W
If you have root, you can usually remount in your file manager application (File Manager or ES explorer). Check in settings
Click to expand...
Click to collapse
i do it! but not work!!!!
saeed_karaj2000 said:
i do it! but not work!!!!
Click to expand...
Click to collapse
There must be something wrong with your RW access if you cannot modify the file.
Try this:
1) Copy the said file to your SD card
2) Connect your phone as Mass Storage
3) Using and Editing software like Notepad ++ open the file and make the changes and save the file
4) Go back to your File Manager and rename the existing file (the one in the root folder)
5) Copy the modified file from your SD card to the correct location
If copying or renaming the file fails, means you dont have Read/Write access to the root folder.
I am also using xperia tx and although my wifi doesnt disconnect , it really makes my phone lag a lot while I am using wifi...should I also try this method ?
divirokr said:
I am also using xperia tx and although my wifi doesnt disconnect , it really makes my phone lag a lot while I am using wifi...should I also try this method ?
Click to expand...
Click to collapse
If you have root access you may try it. Though i don't know if it will solve it. The wifi problems are very eratic. Most of the issues depend on the access points being used and their settings.
Try it and keep us posted.
Don't forget to make a backup of the file before modifying.
ravijokhun said:
If you have root access you may try it. Though i don't know if it will solve it. The wifi problems are very eratic. Most of the issues depend on the access points being used and their settings.
Try it and keep us posted.
Don't forget to make a backup of the file before modifying.
Click to expand...
Click to collapse
I just rooted my phone today and after mounting the system to r/w on root explorer, my phone restarts suddenly.
Search for and flash the reboot fix. It's a known issue
Sent from my LT30p using xda premium
Related
After much google searching, and searching here on XDA, I'm at a loss. I have the Allshare.apk and .odex, however I have had no luck installing them. I've tried various suggesions, including pushing them from adb shell, and nothing seems to work.
I would love to continue using custom roms, but not having Allshare is a big reason for me to just use rooted stock. The rom I'm trying to install it on is Cognition Beta (Froyo).
Titanium Backup also doesn't work for this. It tells me that it backed up Allshare, but when I try to install it, the restore button doesn't even show up.
Also, a quick question for Rom Manager. With the rom backup feature, can you only restore a backup for the rom you are using? (i.e if you want to restore a backup for another rom, you have to flash the rom first, then restore?)
Although posted in the wrong forum... I'd also like an answer to this. Running CDE and would really like to have AllShare to stream movies off my media server.
Sent from my SAMSUNG-SGH-I897 using XDA App
sdotbrucato said:
Although posted in the wrong forum... I'd also like an answer to this. Running CDE and would really like to have AllShare to stream movies off my media server.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Not sure why this would be the wrong forum. I'm using a Captivate, and trying to install Allshare on a Captivate rom.
use root explorer and add them to System/app and paste both files there.
reboot your device, and voila
mendez91 said:
use root explorer and add them to System/app and paste both files there.
reboot your device, and voila
Click to expand...
Click to collapse
Seriously? It's that freakin simple?
yup
try it,
and let me know the results lol
mendez91 said:
yup
try it,
and let me know the results lol
Click to expand...
Click to collapse
Still at square one. Altho the .apk and .odex are now in system/apps, it didn't affect anything. Also, looked up root explorer, and how to use it, then downloaded it. It won't remount my main file system as read only...so it's permanently in r/w now.
Also tried flashing to killer23d's rom, to use titanium backup on the allshare he has in his rom, still wouldn't work.
So....clueless at this point.
jrphoenix77 said:
Still at square one. Altho the .apk and .odex are now in system/apps, it didn't affect anything. Also, looked up root explorer, and how to use it, then downloaded it. It won't remount my main file system as read only...so it's permanently in r/w now.
Also tried flashing to killer23d's rom, to use titanium backup on the allshare he has in his rom, still wouldn't work.
So....clueless at this point.
Click to expand...
Click to collapse
At one point, I had this same problem, and the only solution there is, is to reflash the rom. It's a PITA, I know. And don't worry about what your filesystem is mounted as in Root Explorer. After every reboot it reverts to read only again.
miztaken1312 said:
At one point, I had this same problem, and the only solution there is, is to reflash the rom. It's a PITA, I know. And don't worry about what your filesystem is mounted as in Root Explorer. After every reboot it reverts to read only again.
Click to expand...
Click to collapse
Unfortunately that doesn't seem to be my case. Even after reflashing Cognition, my file system is still R/W. Didn't even have to hit the white button on root explorer to paste files into system/app.
Also, adding dlna.apk and dlna.odex into system/app still isn't giving me Allshare.
Edit: Well, I've found a better solution. I'm gonna go with Killer23d's rom...looks alot more like stock Froyo, is based on the I9000, has Allshare, AND Mobile AP. Both features that I wanted.
Thanks for trying guys. If anyone does come up with a solution tho, please feel free to use this thread, as searching for allshare.apk on google results in this thread being either the 2nd or 3rd search result (can't remember).
Works for me.
I just put AllShare back in, using the attached file, and it's working fine.
I'm running Cognition 2.2 Beta 9.1.3 and put the file into "system\app" using Root Explorer.
I also changed the permissions of the file and selected just the following:
USER = READ + WRITE
GROUP = READ
OTHERS = READ
Remove any other checked permissions.
In case you don't know how to get into the permissions, just long-press the file, from within Root Explorer, and choose "Permissions" from the list that pops up.
Don't forget to reboot right after.
Your issue is most likely because you are trying to reintegrate an odex'ed AllShare while you are using a de-odex'ed ROM. Ozone777's file looks to be about the correct size for a de-odex'ed AllShare. Just move it into the /system/app folder with root explorer as mentioned above and you should be good to go.
I used terminal to drop the APK attached in the previous post into /system/app and it works beautifully. CogYo 2.2.9
Sent from my SAMSUNG-SGH-I897 using XDA App
Thank you ozone777
The one app that I really wanted back from the stock load!! thank you!!! Worked perfectly on Cognition v2.2 BETA9.1.3
allshare installed
This forum is awesome, I was able to put back allshare and it is working like a champ.
Thanks guys.
Moved to Q&A.
ozone777 said:
I just put AllShare back in, using the attached file, and it's working fine.
I'm running Cognition 2.2 Beta 9.1.3 and put the file into "system\app" using Root Explorer.
I also changed the permissions of the file and selected just the following:
USER = READ + WRITE
GROUP = READ
OTHERS = READ
Remove any other checked permissions.
In case you don't know how to get into the permissions, just long-press the file, from within Root Explorer, and choose "Permissions" from the list that pops up.
Don't forget to reboot right after.
Click to expand...
Click to collapse
Didn't work on Assonance (Froyo).
Errors with: "Application not installed".
Any tips?
i would try to reinstall this file.
ozone777 said:
I just put AllShare back in, using the attached file, and it's working fine.
I'm running Cognition 2.2 Beta 9.1.3 and put the file into "system\app" using Root Explorer.
I also changed the permissions of the file and selected just the following:
USER = READ + WRITE
GROUP = READ
OTHERS = READ
Remove any other checked permissions.
In case you don't know how to get into the permissions, just long-press the file, from within Root Explorer, and choose "Permissions" from the list that pops up.
Don't forget to reboot right after.
Click to expand...
Click to collapse
I am getting this error message. What gives? (BTW, that's on my Bell Galaxy S I9000M with seeAMRS JL2 ROM)
The application AllShare (process com.sec.android.app.dlna) has stopped unexpectedly. Please try again.
Ahhhh you guys rock worked perfect for me as well!!!
Will not work on Cappy running CyanogenMod 7 Nightly. I dont know if this matters.
Baseband T959TLJL3
Kernel 2.6.35.7-gba356bo [email protected]#1
Build GRJ22
Im a medical student and I really would love to be able to use the newly available Android Medscape app (free from the market) on my phone.
Unfortunately, it says in description of the app that it may have problems with "rooted" phones. Im assuming it means our HD2's running android on NAND as well, because after installing the App on my phone, I am unable to update/download the Clinical reference data required for the app to work offline.
It gives the error "Internet connectivity was interrupted..Please try again"
Any help from the developers or anyone else would be very greatly appreciated
dude0014 said:
Im a medical student and I really would love to be able to use the newly available Android Medscape app (free from the market) on my phone.
Unfortunately, it says in description of the app that it may have problems with "rooted" phones. Im assuming it means our HD2's running android on NAND as well, because after installing the App on my phone, I am unable to update/download the Clinical reference data required for the app to work offline.
It gives the error "Internet connectivity was interrupted..Please try again"
Any help from the developers or anyone else would be very greatly appreciated
Click to expand...
Click to collapse
Looking at the description and the error you gave, have you tried disabling any ad-blocking software? It may be something cooked into the ROM - if so, try asking the dev how to disable it. DLing now - i'll post back what I find.
.............................
EDIT:
Ok, having found this question asked on the thread for the ROM I use, you can remove medscape from the adblock 'hosts' list. (find it in \system\etc).
Original Post URL: http://forum.xda-developers.com/showthread.php?p=11521445&highlight=block#post11521445
I had to copy the file to PC before editing and copied back again using droidexplorer.
kinsago said:
Looking at the description and the error you gave, have you tried disabling any ad-blocking software? It may be something cooked into the ROM - if so, try asking the dev how to disable it. DLing now - i'll post back what I find.
Click to expand...
Click to collapse
Thanks for the reply. I forgot to mention the ROM im using. Its Core Droid DHD 1.5, and it seems you may be right. It says in the description of the ROM that the "Adds are Blocked (Host files modified)". Is there any way to reverse this host file change?
Fixed it with the help of the developer of the Core Droid ROM. Just opened the app "Add free" and hit "revert". Restored the original host file. Medscape works now.
im having the same issue and clicking the "revert" bottom on AdFree did not fix it
I have uninstalled AdFree and have the same problem all the time. Anybody fixed this?
i had the same problem!
After i revert the hosts file in ad-free, medscape did not update the reference!
So what i did:
I did not unistall ad-free, but:
- i revert the host file 3 times in a row;
- i stopped the access of AD Free from SuperUser (root access);
- and i restart medscape (i killed the process with automatic task killer) and start it again;
- and voila, my htc g1 is updating the reference while i text.
(i don't know what are the steps that make medscape update, but i guess, is the revert host file and restart the app, to it starts didn't knowing that can't access that host to update)
I hope this help you!
Good luck
It works for me, reverted host files, stopped Adfree acces to Superuser and voila!! Medscape is updating again. Thanx
how to correct medscape installation please?thx\
SOLVED!
Just got an OTA update for my flyer and software got updated to version 2.27.1540.32
The android version is 2.2.4 while sense is 1.0
Just for the record, AdFree only works on ROOTED devices. i mentioned in another thread on xda that adfree does not work for me. with this OTA update, my Medscape is finally installing as i type this - - -
Just kill the AdFree app and immediately run Medscape app,it'll definitely take the update.I did the same and it worked
i try looking for file in \system\etc
in use editor to open file host.. thera are a lot of files,
and it make me confuse, where the file "medscape from the adblock 'hosts' list" is ???
wisnu19 said:
i try looking for file in \system\etc
in use editor to open file host.. thera are a lot of files,
and it make me confuse, where the file "medscape from the adblock 'hosts' list" is ???
Click to expand...
Click to collapse
i had found problem solve
copy host file from \system\etc (in yr device) to PC
[*]and open using worldpad in pc
[*]use search from worldpad..type medscape
[*]and delete all file which has name medscape
[*]save !!
[*]move and replace host file which edit from pc to \system\etc in yr device (use es file explorer)
[*]install again medscape
[*]and the update reference should work again..done !!
not solved for me!
Hi everyone!
Well, I've experienced the same "connectivity error" as everyone with a root cellphone, after reinstalling medscape app at my cell. I never had AdFree, and even though I'm able to found the hosts file and take a look of it with my pc it says absolutely nothing about medscape (only 127.0.0.1 localhost and emptyness after), so I guess I must be getting the wrong file or not accesing to it correctly?
I've tried everything you said, but is still not working.
I'm pretty new with android, and I would really aprecciate you help, given the fact that this is one of my favorities app!
lalauri089 said:
Hi everyone!
Well, I've experienced the same "connectivity error" as everyone with a root cellphone, after reinstalling medscape app at my cell. I never had AdFree, and even though I'm able to found the hosts file and take a look of it with my pc it says absolutely nothing about medscape (only 127.0.0.1 localhost and emptyness after), so I guess I must be getting the wrong file or not accesing to it correctly?
I've tried everything you said, but is still not working.
I'm pretty new with android, and I would really aprecciate you help, given the fact that this is one of my favorities app!
Click to expand...
Click to collapse
i just rename file host in /system/etc via root explorer..then it works like a charm
note: ypu can rename it by any programs that's can mount and write root folder and explore (es file explore,x-plore,etc)
Rename?
ivaneris said:
i just rename file host in /system/etc via root explorer..then it works like a charm
note: ypu can rename it by any programs that's can mount and write root folder and explore (es file explore,x-plore,etc)
Click to expand...
Click to collapse
i have got a file in /system/etc called "hosts" , so what should i rename it after? im using root explorer.
Thanks
Thanks Ivaneris
Iam on CM 7.2 LG p500.I had same probs and ur method really worked like a charm.I thought I almost lost it but thanks to you.BTW I renamed hosts file as explorer
Dear all,
I am desperately looking for a STK.apk from the ICS SDK.
I am currently unable to install the sdk since I have no access to a computer right now.
Can someone please post a link to the latest stk.apk?
Sent from my I9000 using XDA App
Edit:
I have found another STK.apk than the one from post 3. The latter one has been extracted from OneCosmic's ICS Beta 1. It works fine for me as well. Apparently my Dual SIM adapter does not need all functions of STK, so it may not work for sending provider codes.
Anyone who is able to use the attached STK with provider codes, please provide feedback for others.
SiriusCybernetik said:
Dear all,
I am desperately looking for a STK.apk from the ICS SDK.
I am currently unable to install the sdk since I have no access to a computer right now.
Can someone please post a link to the latest stk.apk?
Sent from my I9000 using XDA App
Click to expand...
Click to collapse
mmeeetooo i need it plzzzzz
Success
To all it may concern:
I downloaded the STP.apk (SIM ToolKit) from the ICS Apps Dump , copied the apk to "system/app" and changed the permissions to Owner: RW, Group: R, Others: R
To do so, use any Root Explorer app.
As I am not yet allowed to paste links, please PM me if you want me to sent it to you.
Works like a charm now...
Steps:
1. Download 'stk.apk' and copy it somewhere on your phone
2. Move it to '/system/app' with a root enabled file manager
3. Change the permissions as described above
4. Reboot
F.y.i.: Root does not work on my ES File Explorer.
I use 'File Manager HD', cause it's easy to use and it is free.
Dont forget to enable root in the settings.
Permissions can be changed by long press on the file.
Doesn't work with 4.0.3 Is there newer apk available?
Toonio said:
Doesn't work with 4.0.3 Is there newer apk available?
Click to expand...
Click to collapse
Well I am on Onecosmics great RC1 with "updated" kernel, which is also 4.0.3 and it works perfect. It works even better than on GB.
I am using a dual SIM adapter which needs STK to switch between SIMs. On GB Stock, the process crashed from time to time and I had to restart the phone in order to be able to switch SIMs. Now, I doesn't crash anymore.
- Did you copy the file with a root-enabled explorer and assign the correct permissions?
- Do you have any radio related issues on your ICS installation? (e.g. incoming/outgoing calls working, no mobile data issues etc.)
I did all the things above, can't instal it....
Need other version of stk.apk?
Greetz
I don't think that you need another version, since this one is from the ICS System App Dump and it works perfect with 4.03
Do you receive any FCs on the Phone process? Can you copy stk.apk to system/app ? Did you check permissions (i.e. rw-r--r--)? Is the stk.apk still in the correct folder after reboot? Did you reboot?
A detailed description of what happens would be an asset if you want help.
I did everything as described here. Seems that app somehow works, but something isn't like it should be. My confirmation through stk doesnt reach back to server I guess.
STK depends on RIL!
Toonio said:
I did everything as described here. Seems that app somehow works, but something isn't like it should be. My confirmation through stk doesnt reach back to server I guess.
Click to expand...
Click to collapse
I'm not surprised... this is the same behavior I saw on CyanogenMod 7.
SIM Toolkit is heavily dependent on the Radio Interface Layer (RIL) implementation. As I understand it, the RIL is the hardware/software component which interacts with the phone's modem/baseband in order to call, SMS, 3G, etc. SIM Toolkit and USSD codes are all dependent on separate functions in the hardware, and the software layer must also implement hooks for them to work properly. The original poster's SIM switching gadget might work because the functions it relies on are implemented, while the ones we need are not.
Also, I've noticed that certain operations work on Onecosmic's ICS which don't work on Teamhacksung's, such as *522#, my bank's mobile interface. STK has only ever worked for me on Samsung stock ROMs.
More info about Android's RIL software and how it interacts with the hardware: http://www.netmite.com/android/mydroid/development/pdk/docs/telephony.html
Thanks aorth, for this detailed insight.
So I must consider myself as a 'lucky guy'.
Could the issue be fixed by using or porting a Nexus S modem?
Sent from my I9000 using XDA App
Damn, it won't wok properly then?!
Thx, and I'll keep hoping
I did everything in the steps. It's installed. I can't seem to find it in the app drawer. Nothing in my app drawer is hidden. So, since i can't find it. I can't run it.
Solutions?
Hi, with 'installed' , do you mean 'copied to \system\app' with correct permissions and still there after reboot ?
Sent from my I9000 using XDA App
not sure if this is the right place to ask but has anyone had an issue while on a call the only way yo talk to the person is either on bluetooth or speaker? btw using kernel that came with rc3plus
I can install it as a normal app or should I be root?
kasitodo said:
I can install it as a normal app or should I be root?
Click to expand...
Click to collapse
You must be root and you need a file manager with root access.
c.f. instructions on first page, post #3.
If you are not used to do this kind of stuff, be cautious and follow the instructions step by step. PM me, if you are unsure.
Do it at your own risk. I am not responsible for whatever could be the consequences of your doing.
I've just downloaded and followed the instructions for installation at post #3 and it worked fine! I'm using Onecosmic's ICS RC3.1 in my SGS.
Thanks...
SiriusCybernetik said:
To all it may concern:
I downloaded the STP.apk (SIM ToolKit) from the ICS Apps Dump , copied the apk to "system/app" and changed the permissions to Owner: RW, Group: R, Others: R
To do so, use any Root Explorer app.
As I am not yet allowed to paste links, please PM me if you want me to sent it to you.
Works like a charm now...
Steps:
1. Download 'stk.apk' and copy it somewhere on your phone
2. Move it to '/system/app' with a root enabled file manager
3. Change the permissions as described above
4. Reboot
F.y.i.: Root does not work on my ES File Explorer.
I use 'File Manager HD', cause it's easy to use and it is free.
Dont forget to enable root in the settings.
Permissions can be changed by long press on the file.
Click to expand...
Click to collapse
Well, i tryed everything and it doesnt work for me on "Onecosmic's ICS Port Android 4.0.3 RC3.1" :s
PS: I tryed with Root Explorer, Super Manager and even downloaded the app you said, but it doesnt have any option for Root lol, so i cant access those folders :s
NaabKing said:
Well, i tryed everything and it doesnt work for me on "Onecosmic's ICS Port Android 4.0.3 RC3.1" :s
PS: I tryed with Root Explorer, Super Manager and even downloaded the app you said, but it doesnt have any option for Root lol, so i cant access those folders :s
Click to expand...
Click to collapse
What exactly does not work? Do you have working root access?
If you are not able to copy the files to the specified location, then either your root is not working or you have not enabled it correctly.
In the app I mentioned, you must do the following:
- start 'file manager'
- press left button and select 'settings' from the context menu
- tick 'Root Explorer' and 'Mount system writeable' checkboxes
- allow the app root access whenever asked...
Sent from my GT-I9000 using XDA App
SiriusCybernetik said:
What exactly does not work? Do you have working root access?
If you are not able to copy the files to the specified location, then either your root is not working or you have not enabled it correctly.
In the app I mentioned, you must do the following:
- start 'file manager'
- press left button and select 'settings' from the context menu
- tick 'Root Explorer' and 'Mount system writeable' checkboxes
- allow the app root access whenever asked...
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Ofc. i have root access, but for me, it simply didnt work, the app doesnt show in the app list =/
This MOD base on V10F Deodex ROM from http://forum.xda-developers.com/showthread.php?t=1871858
==== Download Section ====
1. Download Link from my blog Shutter/Auto focus Sound Off (adb installer)
2. CWM installer in Thread
===================
==== Feature ====
1. turn off auto focus sound
2. Modify Tone4 in Shutter Sound to silent
=============
==== Installation Guide ====
1. use app that can edit permission such as Root Explorer
rename /system/app/CameraApp.apk - > /system/app/CameraApp.apk.bak (backup original CameraApp.apk)
2. copy CameraApp.apk to /system/app/CameraApp.apk
3. edit permission as picture below
-
-
Screen Shot:
-
-
Thanks, will give this a go later.
The default 4th shutter sound is horrible - why would you ever want to use it?
Glad to get rid of it! :good:
Need original cameraapp
The modified version keeps crashing, and i deleted thr stock app by mistake, can u send me the original cameraapp. Apk?
Thank u so much!
yousefhammad said:
The modified version keeps crashing, and i deleted thr stock app by mistake, can u send me the original cameraapp. Apk?
Thank u so much!
Click to expand...
Click to collapse
you can get on top thread
somboons said:
you can get on top thread
Click to expand...
Click to collapse
Cant find it. I need the stock app. Sorry for the hassle
updating installer in top thread.
Sent from my LG-P880 using xda app-developers app
somboons said:
updating installer in top thread.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Got it thanks alot
somboons said:
updating installer in top thread.
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
I just install the app like any other without problems.
Now I don't remember if SU ask for permission or not but, I just install, reboot and...done.
Thank you! Works perfect !
Do i need to be rooted?
Will we loose it if we get a fw update?
profyler said:
Do i need to be rooted?
Will we loose it if we get a fw update?
Click to expand...
Click to collapse
You need to be rooted, at least to be able to use AntTek and Root Uninstaller, and no, you won't loose it in case of FW update, unless the upgrade is for the camera too... but the process is fast. 5 minutes and its done
RuedasLocas said:
You need to be rooted, at least to be able to use AntTek and Root Uninstaller, and no, you won't loose it in case of FW update, unless the upgrade is for the camera too... but the process is fast. 5 minutes and its done
Click to expand...
Click to collapse
Thanks Dude, but did download the ICS Camera, to take pictures without shutter sound.
Ruedas, a rooted phone doesnt receive OTA updates, right?
strange thing that i downloaded the apk, tried to install it but wouldnt work even after changing permissions. Had no camera forawhile. Downloaded the stock apk, just copy and pasted it in the folder and all of a sudden i have my camera back with no shutter sound...no idea why but thanks
I'm trying my best to fix (IOW; mute) the shutter sound on my GF's O4X. While I believe I understand how this is done, I'm not able to actually get it done.
I've managed to get the phone rooted (thanks to alexp999's simple to follow guide). If I've understood things correctly; I now need to replace the original camera.apk with the modified one found in this thread.
Problem is that, in the /system/app folder, both renaming files (the old camera.apk) and copying files (the new camera.apk) to the folder fails.
Anyone able to see what I'm missing / doing wrong? Any help would be thoroughly appreciated!..
vidvandre said:
I'm trying my best to fix (IOW; mute) the shutter sound on my GF's O4X. While I believe I understand how this is done, I'm not able to actually get it done.
I've managed to get the phone rooted (thanks to alexp999's simple to follow guide). If I've understood things correctly; I now need to replace the original camera.apk with the modified one found in this thread.
Problem is that, in the /system/app folder, both renaming files (the old camera.apk) and copying files (the new camera.apk) to the folder fails.
Anyone able to see what I'm missing / doing wrong? Any help would be thoroughly appreciated!..
Click to expand...
Click to collapse
I have my way...
With "Root Uninstaller Pro" I uninstall the original one, than I grab the modded file and past it in .../system/app and I install it from there.
Reboot and its done
RuedasLocas said:
I have my way...
With "Root Uninstaller Pro" I uninstall the original one, than I grab the modded file and past it in .../system/app and I install it from there.
Reboot and its done
Click to expand...
Click to collapse
Thanks for the reply and suggestion RuedasLocas!
Titanium Backup seems to have the option to uninstall system apps, I'll give that a go. Would however like to figure out how to copy files to the system/app folder before I do that (given that this is required to re-install/enable the camera). Have tried with both ES File Manager and Total Commander; both have been given SU-privelages, both are able to browse to the folder, neither is able to copy files to or rename files in the folder...
vidvandre said:
Thanks for the reply and suggestion RuedasLocas!
Titanium Backup seems to have the option to uninstall system apps, I'll give that a go. Would however like to figure out how to copy files to the system/app folder before I do that (given that this is required to re-install/enable the camera). Have tried with both ES File Manager and Total Commander; both have been given SU-privelages, both are able to browse to the folder, neither is able to copy files to or rename files in the folder...
Click to expand...
Click to collapse
Use "AntTek" explorer, works together, or alone if you wish, with Root Uninstaller, you can copy/paste or just cut/paste...
RuedasLocas said:
Use "AntTek" explorer, works together, or alone if you wish, with Root Uninstaller, you can copy/paste or just cut/paste...
Click to expand...
Click to collapse
Tried AnTek Explorer; What an interesting file manager! Will have to test this for a longer period of time, could possibly become my new goto file manager. Thanks for the tip!..
Though I couldn't get the new/modified camera.apk to the system/app directory. Though this time it failed with an error messge; "Error Don't have enough permission to do this action" (see attached screenshot). Have double-checked that "Native mode" is enabled within AnTek and that its (permanently) enabled in SuperSU. Not sure how I can give an app even more permissions...
vidvandre said:
Tried AnTek Explorer; What an interesting file manager! Will have to test this for a longer period of time, could possibly become my new goto file manager. Thanks for the tip!..
Though I couldn't get the new/modified camera.apk to the system/app directory. Though this time it failed with an error messge; "Error Don't have enough permission to do this action" (see attached screenshot). Have double-checked that "Native mode" is enabled within AnTek and that its (permanently) enabled in SuperSU. Not sure how I can give an app even more permissions...
Click to expand...
Click to collapse
Just reboot the phone and it should be enough.
Some apps need a reboot to work properly.
RuedasLocas said:
Just reboot the phone and it should be enough.
Some apps need a reboot to work properly.
Click to expand...
Click to collapse
Thanks for all the help! Rebooting allowed me to rename files. Then I finally figured out why copying files to the system folder failed (or at least partly); For reasons unknown to me, I weren't allowed to copy/move files directly from the external_sd card to the system/app directory, Had to first move the to an internal location, then I could move then to the desired location!
End result; The annoying shutter sound is gone! :victory:
Again; Thanks for all the help!
First of all, I found this guide under the S7 Edge section on XDA. I tried it and it worked on my rooted A70, so I wanted to share it here.
There are two methods. One of them needs root access, and the other doesn't. I didn't try the one which doesnt need root access.
METHOD 1 (NEEDS ROOT)
1- Install a file explorer which can access and edit system folders.
2-Find build.prop and copy it.
3-Paste it to your main storage.
4-Open it with a text editor and go to the end of the lines.
5-You will see a line which says "ro.config.tima=1". Turn it into "ro.config.tima=0".
6-Save and copy new edited build.prop.
7-Paste it to it's original place and overwrite it.
8-Reboot your phone and check Samsung Health.
Rootless method is not working but if you want to test it, test it:
METHOD 2 (DOESN'T NEED ROOT)
I DIDN'T TRY THIS AND I AM NOT SURE IF IT WORKS
1-Uninstall the Samsung Health App.
2-Install Samsung Health version 4 https://www.apkmirror.com/apk/samsung-electronics-co-ltd/s-health/s-health-4-5-1-0011-release/s-health-4-5-1-0011-android-apk-download/
3-Launch the app and follow the steps to complete setup.
4-Update it via Google Play.
Thanks to @CuBz90
The non root method doesn't seem to work. App not installing.
sreedevtali said:
The non root method doesn't seem to work. App not installing.
Click to expand...
Click to collapse
Thanks for testing, I wasn't already giving it chance. I will note that it is not working.
How did you edit the /system? I am having trouble mounting it with read write privileges. My phone is rooted. Unable to "adb root" or mount system r/w. My multiple file explorer apps have had root access granted by magisk but I am still not able to replace it. I tried deleting it to see if I would be able to. I was able to but unable to paste the updated build.prop back into system. Had to reflash ??
cealaska said:
How did you edit the /system? I am having trouble mounting it with read write privileges. My phone is rooted. Unable to "adb root" or mount system r/w. My multiple file explorer apps have had root access granted by magisk but I am still not able to replace it. I tried deleting it to see if I would be able to. I was able to but unable to paste the updated build.prop back into system. Had to reflash
Click to expand...
Click to collapse
I think you're having trouble with pasting (overwriting) the edited build.prop.
I am using FX File Manager with root addon. You can try it. And, do NOT forget to give read/write acces to fx. To do so, when you open /system section you will see a lock icon on somewhere (top right) as I remember. Click it and give permission. Then paste the edited build.prop onto the original one.
Write here if you have any other problem.
Samsung Health
It’s very strange - my old Lenovo tablet, A3300 a firmware ResurectionRemix, Android 7, calmly sees and sets Samsung health from the playmarket. WADW? (What am I doing wrong?):смех: