Database Develop

Help!!!! My htc wont connect to fastboot

Hey guys my htc is stuck on a boot loop so i try to connect fast boot to flash a new boot.img but my fastboot just says usb device not recognized please guys i really need help
My symptoms
Stuck on htc boot logo
Cannot access Recovery
Fastboot wont connect

Locky123 said:
Hey guys my htc is stuck on a boot loop so i try to connect fast boot to flash a new boot.img but my fastboot just says usb device not recognized please guys i really need help
My symptoms
Stuck on htc boot logo
Cannot access Recovery
Fastboot wont connect
Click to expand...
Click to collapse
Put the stock ROM on your sdcard and rename it from ROM.zip to ph39IMG.zip and go to bootloader.

mohamed_moscow said:
Put the stock ROM on your sdcard and rename it from ROM.zip to ph39IMG.zip and go to bootloader.
Click to expand...
Click to collapse
No luck it just goes through and says no image found

U got the HTC USB drivers?
Sent from my Vivid 4G using Tapatalk 2

ZeRo2o9 said:
U got the HTC USB drivers?
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
ok yes i can acess it but no matter what rom i install it is just stuck on the htc logo but i can access recovery

Locky123 said:
ok yes i can acess it but no matter what rom i install it is just stuck on the htc logo but i can access recovery
Click to expand...
Click to collapse
Did you ever find a solution to this? I am in the same boat now. I managed to flash carbon rom and used fastboot to flash boot.img but now I can't go back, fastboot seems broken. USB works fine within the ROM, just not from fastboot. USB Device Not Recognized. Not a driver issue, it's before it even tries to load the drivers.

rewen said:
Did you ever find a solution to this? I am in the same boat now. I managed to flash carbon rom and used fastboot to flash boot.img but now I can't go back, fastboot seems broken. USB works fine within the ROM, just not from fastboot. USB Device Not Recognized. Not a driver issue, it's before it even tries to load the drivers.
Click to expand...
Click to collapse
Are you using Windows 8? I found it does the same with my Sony phone. It sucks!

rewen said:
Did you ever find a solution to this? I am in the same boat now. I managed to flash carbon rom and used fastboot to flash boot.img but now I can't go back, fastboot seems broken. USB works fine within the ROM, just not from fastboot. USB Device Not Recognized. Not a driver issue, it's before it even tries to load the drivers.
Click to expand...
Click to collapse
Yea I fixed it I ended up flashing the kernal then flashing the rom then flashed the kernal once again and it works fine after that but i dont know how i could help any other way

Locky123 said:
No luck it just goes through and says no image found
Click to expand...
Click to collapse
Remember to put all letters in capital and also to relock your bootloader before using the zip file.

My 'USB Device Not Recognized' issue turned out to be Windows 8. I originally flashed my boot.img using Windows 7 at work and forgot that I'd done it from there, so I'd been under the impression that it worked once for me on Windows 8 so it should work again. But in fact, it never worked on Windows 8.
I installed Windows 7 on a second partition at home and it worked without issue. FYI I wasn't using USB 3.0 or anything and I tried a couple of Windows 8 PCs before resorting to installing Windows 7. It's also worth noting that the error in Windows 8 seems to happen before the actual drivers are installed/loaded, so it's not just a matter of picking the proper driver afaik. I did have the proper drivers and HTC Sync Manager, and tried forcing the driver install, but it didn't help. This also means you can't use a virtual machine to work around the issue.
Hope this helps others who run into the 'USB Device Not Recognized' error on Windows 8...
---------- Post added at 11:45 AM ---------- Previous post was at 11:45 AM ----------
Locky123 said:
Yea I fixed it I ended up flashing the kernal then flashing the rom then flashed the kernal once again and it works fine after that but i dont know how i could help any other way
Click to expand...
Click to collapse
Did you wipe data/factory reset after flashing? I didn't see you mention that anywhere. Also, are you sure you're using the right ROMs for the One XL (evita) and not the regular One X? Or the other way around in case you're in the wrong forum?

Help! 4x hd CWM bootloop error! Flashed wrong CWM.

Hello I have an unlocked Lg optimus 4x hd software version 4.1.2 JB. I recently successfully rooted it but CWM said there wasn't one available for my phone on the rom manager app so i found one. I would post a direct link to it but apparently im not allowed to yet.
I realised that this was realised almost a year ago after the fact, this probably is what messed my phone up.
I installed it and ran it, when my phone rebooted it was stuck in a boot-loop. I can still access the default android recovery screen and I tried hard resets and clearing the caches but I'm still stuck on the LG logo. My computer still says that its installing drivers when i plug the phone in but it won't let me do any thing. I have looked around the forums and the solutions i found aren't helping me. Any help would be appreciated.

Adb sideload
THEMND said:
Hello I have an unlocked Lg optimus 4x hd software version 4.1.2 JB. I recently successfully rooted it but CWM said there wasn't one available for my phone on the rom manager app so i found one. I would post a direct link to it but apparently im not allowed to yet.
I realised that this was realised almost a year ago after the fact, this probably is what messed my phone up.
I installed it and ran it, when my phone rebooted it was stuck in a boot-loop. I can still access the default android recovery screen and I tried hard resets and clearing the caches but I'm still stuck on the LG logo. My computer still says that its installing drivers when i plug the phone in but it won't let me do any thing. I have looked around the forums and the solutions i found aren't helping me. Any help would be appreciated.
Click to expand...
Click to collapse
Access the android recovery screen, then select adb sideload.
if you can access adb mode, you can use all in one tools.
ALL IN ONE (TOOL)
Try this way.
Good luck

thanks but...
barscenk said:
Access the android recovery screen, then select adb sideload.
if you can access adb mode, you can use all in one tools.
ALL IN ONE (TOOL)
Try this way.
Good luck
Click to expand...
Click to collapse
thanks but i dont know if my debbugging through usb is on because the tool just say 'error: closed'.

THEMND said:
thanks but i dont know if my debbugging through usb is on because the tool just say 'error: closed'.
Click to expand...
Click to collapse
Just reflash the phone... It takes 7 minutes...
Sent from my LG-P880 using xda app-developers app

Im a noob but im open to advice.
RuedasLocas said:
Just reflash the phone... It takes 7 minutes...
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
How do I do that. I feel like I've tried it before. CWM didn't load properly on my phone so I cant do anything involving the use of it.

THEMND said:
How do I do that. I feel like I've tried it before. CWM didn't load properly on my phone so I cant do anything involving the use of it.
Click to expand...
Click to collapse
You just need to be able to get in S/W Mode by pressing "Vol- & connect to PC".
For a better flash try to use LGFlash Tool, look here:
http://forum.xda-developers.com/showthread.php?p=38838927#post38838927
Post #7 have all you need to do it.
Good luck.

RuedasLocas said:
You just need to be able to get in S/W Mode by pressing "Vol- & connect to PC".
For a better flash try to use LGFlash Tool, look here:
http://forum.xda-developers.com/showthread.php?p=38838927#post38838927
Post #7 have all you need to do it.
Good luck.
Click to expand...
Click to collapse
great it looks like im nearly there but where you saw three ports active and one actually downloading i only saw one active but it wasn't downloading, i feel as if though it could work i just need a little more help. Sorry if this is wasting your time...

simple, run windows enabler to ON, connect phone in S/W mode, go to device manager -- modems --- LG xxxxx *13 ... and the number is the port ... for me i have 13 port selected .. or you can try one by one ... if one fail ( RED --- FAIL TO OPEN) then try another ...

Thank you everyone!!
It worked thank you guys soo much!!

Hi there,
I flashed the wrong cwm as well on my gf phone. (she's going to kill me)
Anyway, the All-In-One tool does'nt help me. I can perform the root (which is useless, because I cant even boot) but I cannot anything. I think it's because no sd is mounted.
Code:
Choose The Number :-7
Now connect your phone with "Debugging" enabled .
Drücken Sie eine beliebige Taste . . .
Copying files ,, Please wait ...
failed to copy 'O4X_OR_R.img' to '/mnt/sdcard/O4X_OR_R.img': No such file or dir
ectory
sh: cat: /mnt/sdcard/O4X_OR_R.img: No such file or directory
rm failed for /mnt/sdcard/O4X_OR_R.img, No such file or directory
I can't even boot into the S/W mode. I just get a grey (or sometimes blue) screen.
Please help!

try to take the battery out plug the phone with a cable on your computer. Insert battery again. Flash firmware
edit: it seems like your all in one tool doesn't find the image.
Sent from my LG-P880 using xda app-developers app

flash a firmware using LG-KDZ-UPDATE-TOOLS. Search them in google,
Follow instructions found in the internet. I can give you a link but its in german. There is probably an english equivalent here somehwere.

help unlocking bootloader

hey guys,
hopefully someone can help me, i'm trying to unlock my bootloader to install custom kernels.
here is when i think it goes wrong:
i'm using sony's official method but when i connect the phone in fastboot mode the computer doesn't ask for drivers like it should (says in instructions).
so i can't choose the modified driver that i've downloaded from the instructions.
thanks in advance!

you may already have it installed if you have installed flashtool.
I suggest deleting all sony/adb/phone applications on your computer, rebooting, and starting again

gregbradley said:
you may already have it installed if you have installed flashtool.
I suggest deleting all sony/adb/phone applications on your computer, rebooting, and starting again
Click to expand...
Click to collapse
that's correct indeed,
damnit.. i'm going to try it..

gregbradley said:
you may already have it installed if you have installed flashtool.
I suggest deleting all sony/adb/phone applications on your computer, rebooting, and starting again
Click to expand...
Click to collapse
even after a fresh install of my computer i can't get it to work.
i searched on google and found out that there are some issues with windows 8.
but after following specific instructions on windows 8 it still isn't working.
then i took an old windows vista computer from the attic and tried it with that.
it atleast asks for drivers but when i get the option to select the drivers myself it instantly disappears because the phone only stays in fastboot for about 10 seconds.
only thing i can think of is installing XP on my old system but is it normal it stays in fastboot for only 10 seconds? then it switches to charging mode.
unlock bootloader allowed is yes!

Download and install flash tool.
Run drivers.exe from the install folder.
Choose fastboot, flashmode and TX drivers.
Then try again for unlocking
Sent from my LT30p using xda premium
EDIT
W8 is a known problem with drivers. That's why is was failing before. Vista or W7 should work fine.

gregbradley said:
Download and install flash tool.
Run drivers.exe from the install folder.
Choose fastboot, flashmode and TX drivers.
Then try again for unlocking
Sent from my LT30p using xda premium
EDIT
W8 is a known problem with drivers. That's why is was failing before. Vista or W7 should work fine.
Click to expand...
Click to collapse
in the mean time i've read somewhere to use flashtool indeed.
got the drivers installed on my w8 system with flashtool, now the phone stays in fastboot (blue light)
then my next problem :laugh:
Open a command window and go to the tools folder within the Android SDK folder.
Enter fastboot.exe -i 0x0fce getvar version, and verify that you get a response back (for example "0.3"). This means your device is connected properly.
there is no fastboot.exe in the tools folder of sdk..
there is one in some folder of flashtool, can i use that one to complete the last point of the instruction?

Make sure you are running Google USB Driver package revision 4 or higher in your Android SDK
Click to expand...
Click to collapse
That is from step 8.
Did you download the google bit of the sdk?
EDIT
You could try this as well
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB

gregbradley said:
That is from step 8.
Did you download the google bit of the sdk?
EDIT
You could try this as well
minimal_adb_fastboot_v1.1.3_setup.exe - 2.12 MB
Click to expand...
Click to collapse
i finally found it.. it's not in tools folder anymore but platform tools.
i'm going to try again now..

Pollie81 said:
i finally found it.. it's not in tools folder anymore but platform tools.
i'm going to try again now..
Click to expand...
Click to collapse
yes..it has been moved. I forgot that myself

gregbradley said:
yes..it has been moved. I forgot that myself
Click to expand...
Click to collapse
it took a while and some extra grey hair but it's done..
i guess... it restarts and the phone went back to stock.
first i'm going to watch LA Ink on tv and then going to try to restore my backup and flash a custom kernel.
many thanks for your help! we got it working!
:good:

[Solved]M7 Soft bricked,ADB/Fastboot not working,No OS as well,TWRP 2.6.3.3

Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
Also,I can't find the device in Device Manager,neither in ADB nor Fastboot.
I tried using Windows 8.1 and 7..Same deal.
Thank you!

chris_b0ss said:
Hello.I am in some kind of a trouble..I just bought a phone with firmware problems,hoping i could make it work.The problem is this,someone tried to update the firmware,unsuccesfully,and now it's stuck with no OS.I can only start recovery and bootloader.
Recovery is Teamwin 2.6.3.3.Already tried to clear cache and everything,to use an USB with OTG,but it's not recognised,ADB sideload also it's not working.
adb devices shows the phone is not connected,and FastBoot says "Waiting for device".Any idea? I've tried,read a lot,but I can't really work it out..
I tried using Windows 8.1 and 7..Same deal.
Thank you!
Click to expand...
Click to collapse
Is it a M8 or a M7, because your title says M8 but you have posted in the M7 forum.

Sorry,I am quite scared.It's M7.

chris_b0ss said:
Sorry,I am quite scared.It's M7.
Click to expand...
Click to collapse
First, follow instructions given in this post to install the latest android sdk-tools and the latest htc drivers. Also make sure you don't have HTC Sync installed on your computer.
Then connect your phone to you computer with the original cable (or any other cable already known to work for data transfer - some usb cable are only providing power), reboot the phone in bootloader mode by holding vol down and power. Make sure you see the red "fastboot usb" caption on the screen, if not use vol up/down and power to select the "fastboot" menu. Once there open a command window form the android sdk-tools folder and type "fastboot getvar all". Copy/paste the ouput of this command here (except the imei and serialno).

I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app

chris_b0ss said:
I've followed that,and still not working.pics attached.
It's very weird,because I was expecting for a soundfrom the Windows,like a new device connected .But ..nothing
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
With your phone in bootloader/fastboot mode, go to your windows device manager, take a screenshot of your device manager and post it here please.

The unknown device is related to my laptop.Nothing happens when I connect the phone.

chris_b0ss said:
The unknown device is related to my laptop.Nothing happens when I connect the phone.
Click to expand...
Click to collapse
Ok so its not detected at all
Might be caused by
a bad usb cable --> Try another one that you are 100% sure its working
a bad usb port on the computer (use only usb 2.0 ports btw)
a problem with the computer ---> Try another computer.
a bad usb port on the phone ---> need to replace the usb/front mic board
Might also worth to fix your laptop drivers problem. Might be causing problem if the "unknown" device is an adapter or usb controller...
Then reboot the computer.

I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!

chris_b0ss said:
I think we can exclude the first two,because I've tried 2 different USB cables,and with my S2 ,both of them are working,even ADB.I will try to replace the usb port from the phone,and then try again.But,do you think it will work ?
Thank you!
Click to expand...
Click to collapse
Its hard to tell, there isn't any background info about what was done on that phone. The usb board is pretty cheap so it worth a try if you are 100% sure everything else is fine (computer, cables etc..)

I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app

chris_b0ss said:
I understand,but,I mean,as far as I know,it's not hard brick,because the phone is still booting..in some way ..so if I manage to connect it,I can flash the rom..am I right?
Sent from my GT-I9100 using XDA Free mobile app
Click to expand...
Click to collapse
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.

alray said:
Normally it should be pretty easy to fix if you can get fastboot and adb connectivity. You could then update the firmware so you can flash the correct RUU to restore the phone back to stock, already made the research and all the files (firmware and ruu) you'll need are available.
Click to expand...
Click to collapse
Sorry for the late reply,the phone is now in service,in 1-2 days they should fix the USB board,and I will get back with more info soon.
Thank you very much for your quick answers and for taking time to help me!

Good news,I've managed to unbrick it.I asked a friend with a Mac to check it out,and his Mac recognized with no problems.Installed the Os,but still,Windows can't detect it.I've tried on 2 pc's(7 and 10) with the proper drivers.Weird..
Anyway,thank you for your time @alray !

Can't flash TWRP

Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Click to expand...
Click to collapse
Where is the problem? I've tried with 2 different cables and 2 different computers

Ceranzuo said:
Hi. I decided to flash my Honor 3c with Cyanogenmod 12.1. My problem is that i need TWRP (now I have CWM) but i can't flash it to my device. I try to do it by SP Flash Tool, but after i connect my turned off device, I get this error:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (0x7D4)
[H/W] Fail to download DA to baseband chip's internal SRAM!
[HINT]: 1. There's an cable communication problem between FlashTool and BootROM. 2. Target might be shutdown unexpectedly or target lost power supply.
[ACTION] 1. Try again. 2. Proceed H/W checking in download cable and target side com port. 3. Monitor if power-drop occured in target side.
Where is the problem? I've tried with 2 different cables and 2 different computers
Click to expand...
Click to collapse
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
If you are already doing that or the problem still persists and have an unlocked bootloader(which I am sure you have), try to flash twrp manually.

muradulislam said:
Is your phone in bootloader mode? Hold Vol down+power to enter fastboot mode and then connect your phone to PC.
Click to expand...
Click to collapse
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.

Ceranzuo said:
When I do it, my phone just turns on normally.
How can I check if I have unlocked bootloader? I have unlocked it about 1 year ago, but I did full wipe yesterday.
Click to expand...
Click to collapse
Vol down+power should boot into fastboot. Turn off the phone, hold both until honor logo shows up, let go of power but hold vol down for about 5 sec more.
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
If it can not boot into bootloader still, the last is to try adb but that is a bit lengthy.
In bootloader mode, it will be written on phone screen in red whether phone is locked, unlocked or relocked.
Wipe does not effect bootloader status so it's still unlocked imo.

muradulislam said:
If still the same, Turn off your phone, connect USB cable to phone, hold Vol down and connect the cable to computer. It should boot into bootloader now.
Click to expand...
Click to collapse
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse

Ceranzuo said:
After this, I got this text on my screen:
FASTBOOT&RESCUE MODE
Please connect usb cable to your computer and open hisuite
Click to expand...
Click to collapse
It did not say anything about phone unlocked in red?

muradulislam said:
It did not say anything about phone unlocked in red?
Click to expand...
Click to collapse
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2

Ceranzuo said:
Nope. Maybe I was wrong and I have never unlocked it? I don't remember, but I did something when I was upgrading my phone to Android 4.4.2
Click to expand...
Click to collapse
At least it should say, phone locked. Saying nothing is a phenomenon i never heard before but I usually go for newer versions. May be that's the case.
Anyways use adb to fire this command
Fastboot OEM device-info
To be sure if its locked or not.
To setup adb, download and install latest Android SDK, run the program and only download platform-tools.
Your phone is international variant and it came with locked bootloader, I am sure sp tools unlocked it coz otherwise CWM could not be flashed.
Right click platform-tools folder and select run command prompt window here and type the above command
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
And try to reboot into recovery after disconnecting from pc and simultaneously holding power+ Vol up.

edit: nevermind, i forghot about something...

muradulislam said:
If the bootloader is unlocked (it will tell you if it is), copy the twrp image to platform-tools folder and rename it to twrp.img and fire this command
Fastboot flash recovery twrp.img
Click to expand...
Click to collapse
Should I do this when my phone is switched off?

Ceranzuo said:
Should I do this when my phone is connected to pc or not? Switched off?
Click to expand...
Click to collapse
When your phone is connected to your pc in fastboot mode.
Lemme know how did it go, will reply back in the morning. Hope everything works fine for you.
Sent from my PLK-L01 using XDA Labs

muradulislam said:
When your phone is connected to your pc in fastboot mode.
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
Click to expand...
Click to collapse
after this I reboot into recovery mode, but there is still CWM, not TWRP

Ceranzuo said:
Ok, after I typed this command, there appeared this message in window:
<waiting for any device>
after this I reboot into recovery mode, but there is still CWM, not TWRP
Click to expand...
Click to collapse
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs

muradulislam said:
You dont have your phone drivers installed. Google Huawei USB drivers and install them or use hisuite to install drivers for your phone.
After driver installation, do the same process again.
My bad. I assumed you would have drivers already installed
Sent from my PLK-L01 using XDA Labs
Click to expand...
Click to collapse
I have already installed many drivers from different sites. I will try with hisuite

Ceranzuo said:
I have already installed many drivers from different sites. I will try with hisuite
Click to expand...
Click to collapse
Hisuite is the best option. Even if that does not work (there is a chance of that), Google Kouch's universal drivers and install those.
May have to manually install dribers if nothing works.
Lemme know how did it go. Will get back to you in the morning if nobody else came along (but someone surely will before that).
Have a nice day/night depending on your time zone
Sent from my PLK-L01 using XDA Labs
---------- Post added at 07:41 PM ---------- Previous post was at 07:31 PM ----------
Lemme get my teacher for you
@DigiGoon
Sent from my PLK-L01 using XDA Labs

I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.

Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
I was awake just for your post. I think I got the problem. You need fastboot drivers imo but I would have to read a bit before I can suggest how to go about it.
Am busy tomorrow but will try to get back to you in the evening (GMT+5 time zone).
Can never be 100% sure but still I am confident, your problem has a solution. Just bear with me a day or two
Sent from my PLK-L01 using XDA Labs

Ceranzuo said:
I installed Hisuite and connected my phone. Windows have downloaded drivers automatically. And still the same...
But I forgot to tell you that when I connecting my switched off phone, my pc says "USB Device Not Recognized" (or something like that, I dont have english version of windows). Everything is ok when my phone is switched on...
This phone is cursed. I try to give up and stay on my current ROM, so I installed Nova Launcher, but setting it as default doesn't work :/
Thanks for trying to help me anyway.
Click to expand...
Click to collapse
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
And I must ask: Are you able to do any operations on device via PC after connecting it?

DigiGoon said:
Boot into recovery mode, no matter on which recovery are you on, and execute this command:
Code:
adb devices
And see the output, if it says something like:
Code:
**some_number** recovery
then it means there is no problem in the detection of your device by PC, if it does not, then check if the micro USB socket in the device is in good condition.
Click to expand...
Click to collapse
I did it and it says some number and recovery
DigiGoon said:
And I must ask: Are you able to do any operations on device via PC after connecting it?
Click to expand...
Click to collapse
In "usb storage media" or something like that? Yes, I do.

Ceranzuo said:
I did it and it says some number and recovery
Click to expand...
Click to collapse
Okay, then it means that there is no problem in the connection. You are using SP Flash tool in which mode?
Sent from my PLK-L01 using Tapatalk