I can't my xperia x8 after flashing nAa kernel, can someone help me?
Please read THIS and then EDIT your post....thanks
you haven't mentioned have you unlocked bootloader,how did you flashed kernel etc....edit your post and I or someone else will help you
Just like 8cpaiw said, update your question with these details:
1. Bootloader status
2.Which kernel version
3.Which tool you use
4.Which ROM on the phone when you flash the kernel
Sent from my Nexus 7 using xda app-developers app
Related
Can I flash stock kernel without lossing my rom my phone kernel is fxp030 I want to restore stock kernel and flash official cyanogenmod 7.1 plezzzzzz don't tell me search I want to know If official cyanogenmod kernel can i found it or no very thanks to Avery one on xda forum
You wont lose your data if the rom is compatible with stock kernel!
Sent from my Xperia X8 using xda premium
my rom is gingerdx v25 with stock kernel
but i havent do the bootloader unlock step
can i unlock now?
and how do i do the step?
because i wanna to flash alfs kernel
Read the FAQ and you should have posted this in the Q&A section.
thomaswoh said:
my rom is gingerdx v25 with stock kernel
but i havent do the bootloader unlock step
can i unlock now?
and how do i do the step?
because i wanna to flash alfs kernel
Click to expand...
Click to collapse
First visit this link and read the instructions carefully before doing anything
http://forum.xda-developers.com/showthread.php?p=10879507#post10879507
I downloaded the nAa 11 kernel from nobodyatails thread,but wifi wasn't working,even on gdx 25.then i went to another page,downloaded nAa 11.i noticed that the 2. nAa 11 is bigger.i flashed it,and wifi works. -.-
Sent from my E15i using xda premium
What about a nice big cup of search button ?
Sent from my X8 running nAa and D_d piece of art called MiniCM9.
I want to install MiniCM7 2.2.1, I understand that the nAa-13 kernel is required before installing this.
I have tried flashing this kernel but get the error: ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
My phone details are:
Xperia X8i (E15i)
Firmware: 2.1 update1
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected]#1
Build no. 2.1.1.C.0.O
I tried installing the mini CM7 rom without the nAa-13 kernel and this soft bricked my phone. I had to download a stock 2.1 rom and reflash it.
Anyone know where I am going wrong?
Thanks in advance
Nakiboy said:
I want to install MiniCM7 2.2.1, I understand that the nAa-13 kernel is required before installing this.
I have tried flashing this kernel but get the error: ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
My phone details are:
Xperia X8i (E15i)
Firmware: 2.1 update1
Baseband: M76XX-TSNCJOLYM-53404015
Kernel: 2.6.29 [email protected]#1
Build no. 2.1.1.C.0.O
I tried installing the mini CM7 rom without the nAa-13 kernel and this soft bricked my phone. I had to download a stock 2.1 rom and reflash it.
Anyone know where I am going wrong?
Thanks in advance
Click to expand...
Click to collapse
You have to unlock your bootloader first before you can flash custom kernels.
Guide here: http://forum.xda-developers.com/showthread.php?t=1254225
If you find it too complicated, there are links to other guides in the OP. Make sure that your phone's manufacture date is 11W28 or below.
Sent from my X8 using Tapatalk 2
yeah
using s1 tool or flash tool
and read this too
http://forum.xda-developers.com/showthread.php?t=1481630
BlackRabbit1703 said:
yeah
using s1 tool or flash tool
and read this too
http://forum.xda-developers.com/showthread.php?t=1481630
Click to expand...
Click to collapse
Thanks for the replies guys, I'll git it a go
Im om mini cm7. And i want to install naa ics 4 kernel and mini cm9. Cant i flash it directly the kernel ? Thanks and sorry for noob question
Sent from my E15i using xda premium
playjun said:
Im om mini cm7. And i want to install naa ics 4 kernel and mini cm9. Cant i flash it directly the kernel ? Thanks and sorry for noob question
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Flash kernel > Go to recovery > Full Wipe > Flash Rom.
Sent from my E15i using xda app-developers app
Thanks .so i dont need to uninstall naa 13.just direct flashing from naa 13 to naa ics4.
Sent from my E15i using xda premium
playjun said:
Thanks .so i dont need to uninstall naa 13.just direct flashing from naa 13 to naa ics4.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
yes
playjun said:
Thanks .so i dont need to uninstall naa 13.just direct flashing from naa 13 to naa ics4.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
yes you can
from MiniCM7 you can directly flash he ICS kernel and ICS ROM without any prob
if you stuck on logo or boot animation just wait
or flash it again..kernel and ROM
and dont forget to backup after flash kernel,, then factory reset, etc after flash the kernel
SpyderX said:
You have to unlock your bootloader first before you can flash custom kernels.
Guide here: http://forum.xda-developers.com/showthread.php?t=1254225
If you find it too complicated, there are links to other guides in the OP. Make sure that your phone's manufacture date is 11W28 or below.
Sent from my X8 using Tapatalk 2
Click to expand...
Click to collapse
I have a problem, after flashing my x10mini I got a black screen and i cant even get into recovery. I have allready unlocked the bootloader and every time I flash same thing happens... :\ any help????
Betogil89 said:
I have a problem, after flashing my x10mini I got a black screen and i cant even get into recovery. I have allready unlocked the bootloader and every time I flash same thing happens... :\ any help????
Click to expand...
Click to collapse
try to reflash the whole system with Sony Ericsson Update Service. If your phone can be switch on then just flash the kernel with Flash tool, and try again to access the recovery. Good luck
if you still can connect your phone to PC, there's way to safe your phone
Helloo Everybody..
I will be really grateful if someone found a solution to my problem...
I know that this is not a support site, but a developers world, but after searching and googling, i couldnt help my self.
Mods can close and delete this thread if they want.
My question is that if I flash a Gingerbread kernel(nAa or Alfs) on ECLAIR 2.1...wont it create problems..such as force closing or rebooting sort of problems??
Secondly I read SpydeX thread of unlocking bootloader..i got all the tools ready, but the thread doesnt mentions anything about entering into recovery via kernel on ECLAIR 2.1... the guide just tells that after flashing entr into recovery and flash the rom.
I tried this trick on my friends X8, but no success..
Thanxx in advance
If you flash a custom kernel at the eclair while you have locked bootloader,you will have bootloop(it wont boot,but you can easily fix it),if you have unlocked your bootloader it will be fine
As for your second question,you unlock your bootloader,you flash the kernel(which contain cwm),you enter recovery(cwm),and you flash the rom.
Sent from my X8 using xda premium
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
HemdonG said:
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
Yep,at least gb kernels
Sent from my X8 using xda premium
afaik custom kernels will not work on stock rom.
Sent from my rooted tomato using tapatalk
HemdonG said:
U mean that after i unlock my bootloader and flash the ALFS OR NAA kernel on Eclair 2.1...it will work fine???? And i can use the eclair os normally???
Sent from my X8 using xda app-developers app
Click to expand...
Click to collapse
No he's got it wrong.
1. You can't flash custom kernels on a locked rom flashtool won't allow it.
2. Flashing a custom kernel on stock 2.1 will cause it to bootloop, what you'd normally do is enter recovery and flash a rom that works with the kernel.
Sent from my GT-I9000 using xda premium
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
stamatis16 said:
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
Click to expand...
Click to collapse
Trust me, no kernels will work with stock 2.1
Sent from my GT-I9000 using xda premium
stamatis16 said:
No,users have reported that custom kernels work with stock rom(I remember very clear a user who used naa kernel with stock rom)
Maybe older versions...
If I'm wrong then I apologize
Sent from my X8 using xda premium
Click to expand...
Click to collapse
When you open naa kernel thread hou are going to read: THIS IS YOUR KERNEL FOR GB/ICS/JB
Kernel for stock need to be signed by Sony
Sent from my E15i using xda premium
hello friends,
I have a question:
I port one rom to minicm7 to custom kernel
but I want port to stock kernel
I do not know which is the way to go because the rom does not start
if anyone knows please help me
excuse me for my bad English
First u need a stock kernel supported rom as base(gdx or else)..then, there a lot guide on how to port rom.Just search , u will find it.
Sent from my E15i using xda premium
kreatonn said:
First u need a stock kernel supported rom as base(gdx or else)..then, there a lot guide on how to port rom.Just search , u will find it.
Sent from my E15i using xda premium
Click to expand...
Click to collapse
yes, use a stock kernel gingerdx for the port. But when installing the rom not work :silly:
I already carry x8 custom roms the kernel but I have this problem with the stock kernel :fingers-crossed:
If you have unlocked bootloader, you need a stock kernel with modified ramdisk (what start adb at boot time), and check the logcat while the phone boot. Tip: use qtadb, with this app you get a real-time logcat window, and you can check what happen when the boot process stopping. (a typical error is an incompatible/missing binary or lib file)
Sent from my LT18i using xda app-developers app