Related
Hey guys, just wanted to share my WebIS support experience with you
I bought WebIS PocketInformant some time ago, and now installed it on my Diamond. When you switch the software to full screen, the menu is gone, and its impossible to get it back even after a restart, or soft-reset.
I go on the web and search, check the manual, their support site and FAQ, but cannot find anything. The only things I found is that some of the buttons should switch it off, and a restart of the software, which is not the case on the diamond.
So since I was not able to switch off the full screen I send a support request to WebIS:
WM Hardware: HTC Diamond - WM6Professional
Desktop OS: Windows XP
Version: Pocket informant 8.02
Synch Software: ActiveSync 4.5
Issue:
Hi,
I am unable to turn off Full-screen mode in PI 8.02
None of the buttons in the front work (home, ok, red/green phone, 4 irections, OK)
Restarting (reset) of the device does not work either...
Click to expand...
Click to collapse
They answered quite quickly:
Greetings and thank you for contacting us.
This is actually a common question and as such we have created a knowledgebase article that goes into greater detail for your benefit.
Here is the knowledgebase link:
http://kb.webis.net/
Please let us know if that does not resolve the issue.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
Strange. I thought I checked that one. I am going back there, and filter the search for PocketInformant and windows Mobile, and not one single question/Answer regarding the "Full Screen" mode.
So I write back:
Hi,
I have searched the knowledge base several times already before sending you this email but could not find any answer there.
I searched there for "screen" (13 answers, all something else) and browsed all the 40 Pocket informant Windows Mobil questions, but no help either.
Please be so kind to point me to the correct KB entry instead of the main page or simply tell me how to fix this via email.
Click to expand...
Click to collapse
And they reply, one day later:
Greetings and thank you for contacting us.
You've either hidden the tabs, or the left soft key assignment needs to be changed, FYI.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
Ok, let's see.... I do not have that software button however. and I did not hide the tabs, I just clicked on "Full screen" in the menu. And where is that FAQ entry now?
So I write back:
Dear Customer service,
thank you for that information. It does not help me to fix the problem though.
How do I unhide the "tabs"?
The device does not have a left soft key.
http://www.htc.com/www/product.aspx?id=46278
Can you please show me a way how to fix this, such as a registry entry or maybe reinstalling the software?
I still could not find you FAQ entry. Does it exist??
thanks
Click to expand...
Click to collapse
This time, the answer takes two days to reach me:
Greetings and thank you for contacting us.
Did you try changing the left soft key assignment? That is the FAQ you need, FYI.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
So I go to the advanced search and filter for Pocket Informant, windows Mobile and search for "Soft key" - nothing.
I write back:
Did you read my last email?
I assume that with soft keys you talk about a blank hardware button that has its function assigned by the software?
My device does not have soft keys!
http://www.htc.com/www/product.aspx?id=46278
The device only has a home, return/exit , call, hang up and direction/OK keys.
Also, your FAQ does not say HOW to change that key in case it exists. You also do not mention which registry editor to use.
It does not mention the full screen issue in one word either, how is one supposed to find it?
This is one of the worst support cases I ever had.
Click to expand...
Click to collapse
Now, I get the following answer:
Greetings and thank you for contacting us.
Thanks for your email. Your question is best found in the product documentation that was installed with the software or found on our download site in PDF form. On our support page there is a form to search all of our documentation quickly and read it via PDF or HTML: <http://www.pocketinformant.com/support.php>. We ask that you look there first because the instructions come with screenshots and usually is able to help you better. If you have already looked through the documentation and cannot find what you're looking for, it may be a feature request or bug - so let us know.
Direct links to the PDFs can be found here:
http://download.pocketinformant.com/
We strive to provide the best service we can and if our manual is not doing its job, we would appreciate feedback on that. Let us know if there is any important content missing, readability issues, or hard to find information. We'll be happy to take such feedback to improve the documentation as quickly as possible. Thank you.
We appreciate having the opportunity to help and service you. Please let us know if there is anything more we can do.
Click to expand...
Click to collapse
How is that supposed to help? Isn't that what I was asking for since the beginning? that they help me with the problem?
By now I did a hard reset and reinstalled the software.
Of course, I am not touching the full screen button again. And I am not contacting their support again for troubles either.
Clearly, the Diamond has a disadvantage in applications that rely on the soft buttons to work. There should be a tool to simulate the buttons with the volume buttons or else to fix that.
I've just had a look on their forum and this seems similar to your problem (and they recommend a reg edit solution)
see post 2 http://www.pocketinformant.com/Forums/index.php?showtopic=12917
Hope this works for you
thanks for the help and pointing this out to me.
Maybe you could post back here if the reg edit works? It might help someone else with the same problem or considering whether to buy the application.
well... I fixed it before with a hard-reset and currently I do not plan to use the full screen anymore since only regedit can undo it, and thats simply too complicated. If I try it and it does not work, I have to hard-reset the device again.
But the thread you have from the WebIS the person had it fixed through it, so I assume it should work
I had this issue on my Touch Dual, using a hardware button (like camera) takes it out of fullscreen mode...
Their support was pretty useless for me also, I found the answer on another forum...
A solution for the Diamond is to assign your Send key (Button 1(hold)) as <Left Softkey>.
Yeah, our support guy has been a bit flaky lately. Honestly I think he just got tired of things after seven years. Must be why he resigned at the end of July. I'm sorry that that happened - though. Unfortunately it doesn't make real-world sense to use other buttons like volume control to get out of full screen mode. The Diamond is just not a good full screen mode device without some sort of gestures or other method to get out of it.
I'll definitely be looking for a way to add a button or something as a way to get out of full screen.
Reg edit
The regedit works on the Diamond.
I've exported the PI-registry, edited the "FullScreen"=dword:00000001
into "FullScreen"=dword:00000000
and imported the registry ==> problem solved
Hello,
I was wondering if anyone had an idea on how to tell if the optical pad is currently enabled on the Xperia X1 programmatically? Is there a registry setting somewhere that shows the current mode (D-Pad or Optical)?
...I actually don't have an X1 at the moment, otherwise I would have have been able to investigate this more. I've checked through the xda forums and on Google and haven't found any hints on this.
Hopefully, someone has already come across this setting and will be able to point me in the right direction?
Also, a second question... does anyone have any thoughts on how to detect whether the current device is an "Xperia X1"? I'm guessing there would be a registry setting for this.
Thank you -- any information would be very much appreciated.
I know for one that the device info is a .txt document in the windows folder. I have no idea about the D-pad though. I can't imagine you'd be able to tell through the registry, as modes aren't usually controlled through the registry - which is rather used for fixed variables. I think only the driver "knows" the current status. Won't be easy to extract.
Angelusz said:
I know for one that the device info is a .txt document in the windows folder. I have no idea about the D-pad though. I can't imagine you'd be able to tell through the registry, as modes aren't usually controlled through the registry - which is rather used for fixed variables. I think only the driver "knows" the current status. Won't be easy to extract.
Click to expand...
Click to collapse
Thank you for your prompt response Angelusz. Do you happen to recall the name of the .txt file with the device info?
As for the location of the optical/d-pad mode setting, I actually wouldn't be at all surprised if they stored it in the registry. The setting has to be stored on the system somewhere, and the registry is as good a place as any.
(Sometimes, it's actually beneficial to store things in the registry since then you don't have to worry about creating your own custom file format, or writing file read/write classes.)
Anyone willing to check the registry for such a setting? Or perhaps do a search using the Remote Registry Editor ("Edit->Find")? Maybe a search for "optical" or something?
I'd probably assume that there would be something stored in "HKEY_LOCAL_MACHINE\Drivers"...
Really, any help with this would be great.
Thanks again.
ModelName.txt - it just sais X1i - or X1a if it's an X1a ofc.
I searched the registry for "dpad" - no results.
Checked HKLM/Drivers - no results.
I still think I'm right.
Angelusz said:
ModelName.txt - it just sais X1i - or X1a if it's an X1a ofc.
I searched the registry for "dpad" - no results.
Checked HKLM/Drivers - no results.
I still think I'm right.
Click to expand...
Click to collapse
Thanks for the additional info on the filename and it's contents. So, (just to confirm) the only thing in that file is "X1i" or "X1a"? Or would I have to parse for anything else in there?
Also, thank you very much for doing that search, much appreciated!
Hehe... well, I'm not saying that I'm 100% sure you're wrong, but it wouldn't surprise me if you were ...I'm just saying that the driver has to look somewhere to see whether the optical pad is enabled or not.
They can either use a file or the registry, that's pretty much it. Otherwise a soft-reset or battery drain would cause that setting to be reset.
Okay, one more request, if you don't mind.
Would you (or anyone) be willing to do a registry search for the term "optical" with "Values" and "Keys" checked, in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE?
I realize that this is a lot to ask, so please feel free to say no. In any case, I really do appreciate all of the time you've spent on this so far.
Thanks again for all of your help!
----------
it is under settings, there you can see the optical pad icon to change the settings.
you can put it on/off and there is a option if you want to use it in ie (internet explorer) and you can adjust the sensitivity.
peace to all
p.s. sorry for my useless english i am from hollan
EGMine said:
Thanks for the additional info on the filename and it's contents. So, (just to confirm) the only thing in that file is "X1i" or "X1a"? Or would I have to parse for anything else in there?
Also, thank you very much for doing that search, much appreciated!
Hehe... well, I'm not saying that I'm 100% sure you're wrong, but it wouldn't surprise me if you were ...I'm just saying that the driver has to look somewhere to see whether the optical pad is enabled or not.
They can either use a file or the registry, that's pretty much it. Otherwise a soft-reset or battery drain would cause that setting to be reset.
Okay, one more request, if you don't mind.
Would you (or anyone) be willing to do a registry search for the term "optical" with "Values" and "Keys" checked, in HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE?
I realize that this is a lot to ask, so please feel free to say no. In any case, I really do appreciate all of the time you've spent on this so far.
Thanks again for all of your help!
Click to expand...
Click to collapse
Yes, just X1i or X1a.
That finds some settings, just some strings. A filename, OpticalJoystick_Setings.exe (the app below post describes) and that's it.
gizmo1908 said:
it is under settings, there you can see the optical pad icon to change the settings.
you can put it on/off and there is a option if you want to use it in ie (internet explorer) and you can adjust the sensitivity.
peace to all
p.s. sorry for my useless english i am from hollan
Click to expand...
Click to collapse
That was not his question.
Angelusz said:
Yes, just X1i or X1a.
That finds some settings, just some strings. A filename, OpticalJoystick_Setings.exe (the app below post describes) and that's it.
Click to expand...
Click to collapse
Wow, sorry about the super-delayed response - I didn't see a notification of any new posts come into my email...
Anyway, thank you very much for confirming the data in the text file, Angelusz; and for running the additional registry search. This is very useful and I thank you deeply for taking the time to look into all of this stuff for me!
blackice168: Thank you for your post as well... I saw what you wrote before you deleted it and it was actually quite helpful since I didn't know that about the X1. Turns out that I was asking the wrong question... heh
gizmo1908: Thank you also for your post; and don't worry, your english is actually quite good!
Based on the various posts I now know what to do with the X1; so thanks again everyone!
Hey fellow forum users,
I recently (read: last tuesday afternoon) got my Diamond. And I am kind of lost.
First of all, my internet doesn't work. Tuesday begin of the evening it did work. But at the end of the evening and today it hasn't worked at all. @ the dutch vodafone site there are specific things you need to fill in which I did. However it still doesn't work. So I will be giving them a call first thing tomorow.
Second of all, my music. When I plug in my Touch Diamond on the computer, I see this map "content" I click on it and I see "music" so I put an album in there, but there is no music on the phone. Does it have to be converted? because I didnt find a converter on any of the cd's I was given. The same thing with my video. I put a movie on it for testing, but can't find that anywhere on my phone either.
Further I have some requests,
- I am looking for a transparant clock (the white part transparant) so you'll see the wallpaper better.
- I am looking for a way to change the bottom bar.
- I am looking for the best way to use my gps receiver (like a program or something).
- A way to simplify my contacts, I find it very annoying to have all this info. I just want to keep their names with e-mail, mobile phone numer and home number.
- A thing like that weather tab, only then with the time. Don't know if it's out but I find that a really funny feature on the iPods. Perhaps with those huge analog clocks showing the time of 6 countries in the world
Thanks in advance,
Dennis
p.s. I'll be using this topic if allowed for some further questions and am looking forward to any advice given.
p.p.s general advice on what to do with it for easier and better use of the device is very very much welcome.
p.p.p.s I have these programs on my phone aswell, as a .rar file still though if that matters (he said not), someone adviced me to put them on:
- Mortonscript
- Diamond TF3D Config Setup
- Automatic Wallpaper changer (no use for this yet but I really liked the background he was talking about that changed to the time it was, so like a sun during the day and a moon during the night).
I am completly lost at the moment. Gonna study the books that were packed with it I guess. Any help is appreciated.
1000 times thanks for anyone who can help.
(and hope this is allowed)
anyone that can help?
Rydan said:
anyone that can help?
Click to expand...
Click to collapse
Hi Dennis,
I'll try to help where I can. The internet issue you will probably have to sort out with your provider. If it was working and now it isn't it the only thing I can think of is you made some change to the network config. They should be able to get it working again.
As for Music I found the best way to transfer music to the Diamond is through active sync. Plug your phone in to your PC, when prompted on the phone select active sync, then on the PC open up Windows Media player and select sync. Then just drag and drop the music you want on your phone to the sync panel and then click sync. All the music you selected will be transferred to your phone and the album art and everything if it is available will be displayed on the phone.
For the transaprent flip clock and lots more tf3d mods, look here:
http://forum.xda-developers.com/showthread.php?t=436867
For the bottom bar you have to be more specific, do you want to change the softkeys??
I find the best GPS software is either google maps or microsoft live search, both are free, google them!
For contacts there are many solutions out there, you will have to look on your own, sorry!
I've seen world clock application but most of them are home plugins, again you will have to look around on your own..
As for the rest, you will have to spend some time reading and searching. I don't advise reading the book that came with it as it contains very little useful info.
hit me back if you have anymore questions!!! oh and welcome to the community!!!
With changing the bottombar I mean putting like perhaps the gps on the spot of the photo / video etc.
Thanks btw
Sorry Dennis, as far as i know there is currently no method for changing the tf3d tabs. You can add some but really they already exist just not displayed. You can try SSmapa to replace some of the default functions.
*********************************************************
2009-07-13 PLEASE USE THE NEW MAIN THREAD FOR FLIX HERE!!!
Flix has been updated today to 1.0.7.0
*********************************************************
Hi all.
I've decided to upload the first public release of "Flix". It's a movie listings app i've written, inspired by Cinemo, but for a UK audience. Be gentle with the comments, as it's my first foray into the Compact Framework!
First off, the features:
- Yahoo based
- Search based on Postcode or town
- GPS "Where am I" lookup
- Google Maps link from Cinema Info screen
- Call cinema direct from the app.
- Movies list cast info, Synopsis, runtime, and (optionally) a poster if Yahoo has one.
There is a little more detail on my blog (along with instructions) as I've just added it on there too.
I'm contemplating changing from Yahoo as their postcode lookups seeem to be getting more vague by the day. My own (PE8) has yielded nothing for the past couple of days even though it did previously - so if you find nothing matches up, check the Yahoo page to see what it does at that end.
You'll need to have CF3.5 installed for Flix to work.
Anyway, I'm happy to hear of any comments you have - if you have problems then let me know and I will try and help of course, and suggestions are always welcome too. As ever, if you find it useful then please consider donating!
Thanks
****UPDATE 2009-06-28****
Flix has just been updated! Changes:
-Now supports France and Germany
-Google Maps loading should work if it's installed in non-std locations
-Where Am I function now uses online Geocoding to work in the new countries
-Some improvements to parsing behind the scenes
I do still plan to update it to work in North America, however the Yahoo page is quite different so it's more work. Lots of Euro countries use the same layout as the UK so it's pretty quick to adapt. Expect Spain and Italy next...
As ever, if you find this free app of use, a small donation is appreciated (link above!)
This works really well for me. Nice one!
hey
this works very well..
in fact you need to say that its for more than uk. I am in west of ireland and it picked up one cinema. So it works for me too. I would like it to pick up the other major cinema though but still its very good... well done
Hi jmbilings, nice to see this hitting the streets, Great job so far.
Working well on my Diamond.
Oh and why not in dev and hacking?
Hi James, put a heads up over in the diamond forum.
uniqueboy said:
Hi James, put a heads up over in the diamond forum.
Click to expand...
Click to collapse
Ah, thanks for that... I guess I could have posted it somewhere more helpful in the first place of course!
hey thanks very much this app will make life a little easier for me im always at the movies
i am using a diamond and for some reason it doesn't pick up my postcode. i am EN2 and it only recognises E10?
anyone have any ideas
jonyid said:
i am using a diamond and for some reason it doesn't pick up my postcode. i am EN2 and it only recognises E10?
anyone have any ideas
Click to expand...
Click to collapse
same and im in N13, yet it still finds the nearest one (cineworld enfield)...
an idea: For future releases would it be possilble to have multiple cinemas saved, for example, it will find one near me, but not another near me, thus i have to go through the update process and lose the first cinemas results.
other than that, great app man, really useful
jonyid said:
i am using a diamond and for some reason it doesn't pick up my postcode. i am EN2 and it only recognises E10?
anyone have any ideas
Click to expand...
Click to collapse
I think it is a problem on yahoos end, try going to their website and entering your postcode there and see what it returns, I seem to get better results if I configure flix using the name of my city rather than my postcode.
great app but unfortunately I'm in the usa, cinemo is alright but it feels like a first step and daniel gary is great for filling the gap in the app market with a needed app like this, but his is limited so far.
would it be very hard for you to tweek this a little to make it work in the states here. I really like your interface and features.
thanks
I installed this last night. What a great app! Works a treat. Many thanks for a very useful and easy to use application!!
Hi all - sorry i've not been back to check on this thread, I'm stupid busy at work and my home-time is currently spent sorting a website for a mate who was made redundant
Anyway - I still have plans for Flix ,including support for other countries. I didn't do the US out of the box because Cinemo existed, but if it's not too hard to add I will do, as it gives folk the choice.
Thanks to all who have tried it so far!
Problem with listing by cinema
First of all: great and very useful app.
One problem though: when I click on 'cinemas' and then 'Odeon Wimbledon' and then the clock icon for listings the software just crashes. Any idea why?
Thanks for looking into this issue, Alex.
alexnathan345 said:
First of all: great and very useful app.
One problem though: when I click on 'cinemas' and then 'Odeon Wimbledon' and then the clock icon for listings the software just crashes. Any idea why?
Thanks for looking into this issue, Alex.
Click to expand...
Click to collapse
Hi Alex - i've not seen it crash at that point before! Can you let me know what location you entered so I can try and recreate the problem for myself?
Thanks!
jmbillings said:
Hi Alex - i've not seen it crash at that point before! Can you let me know what location you entered so I can try and recreate the problem for myself?
Click to expand...
Click to collapse
Hi, I entered "SW19 2DX" as post code and it happened, but also when entering just "Wimbledon". I'm using this app on a HTC Touch HD by the way...
I also tried updating all data because I thought it might have been a problem with the data download - but unfortunately the crash still happens...
OK, i've just tested that here and it works fine.
I think it's not a data problem but something else.
What resolution is the HD offhand? There is a little bit of code that makes the button "bounce" bigger and smaller when tapped for UI feedback and I wonder if that does something odd on a different resolution... do you get any details of the actual error? (it may have a button at the bottom for more info; although you might need to install an extra .NET cab to give full details)
Have you tried going the other way as well? i.e. look up a movie and click the clock; does the same happen?
Cheers, and sorry you're having trouble!
jmbillings said:
OK, i've just tested that here and it works fine.
I think it's not a data problem but something else.
What resolution is the HD offhand? There is a little bit of code that makes the button "bounce" bigger and smaller when tapped for UI feedback and I wonder if that does something odd on a different resolution... do you get any details of the actual error? (it may have a button at the bottom for more info; although you might need to install an extra .NET cab to give full details)
Have you tried going the other way as well? i.e. look up a movie and click the clock; does the same happen?
Click to expand...
Click to collapse
Thanks so much for looking into this for me. The Touch HD has a native resolution of 480x800 pixels. When I go to a movie and then click on the clock it shows the times at Odeon Wimbledon just fine.
And very interestingly it now WORKS via the cinema route as well - how odd is that? Maybe because 'Wimbledon' only uses 1 cinema, whereas the post code found quite a few?
I'm just trying the post code again just to be sure...downloading data as we speak...
That is odd; I used the postcode as you mentioned and I get several cinemas:
Cineworld Wandsworth
Odeon Streatham
Empire Sutton
Odeon Wimbledon
However they all list showtimes without problem...
If it still happens, see if you can get any details on the error, otherwise i'm a bit stumped!
All good now, data download finally finished (b****y GPRS here at work) and no crashes anymore...
Maybe me restarting the device in the morning helped.
Sorry for troubling you and thanks again for trying to help. Keep up the good work as this is a great app!!!
I use watchmaker and love it. One issue I am having is certain faces have color settings (color for the hands, color for the text, color for the markets, etc). It seems that after setting the colors just the way I like it, within a few hours the colors reset to the default settings.
Does anybody else have this issue and does anybody know how to get the colors to stick?
Any help is appreciated.
Cheers,
B.D.
It depend on how that specific watchface is being build. You better start building your own face, with the desired colours and that will not reset itself .
ro_explorer said:
It depend on how that specific watchface is being build. You better start building your own face, with the desired colours and that will not reset itself .
Click to expand...
Click to collapse
Not really helpful in answering my question, ro_explorer. I know building my own would allow the watchface to be styled more to my personal tastes without requiring my question be answered, but I do like faces others have created with their personal scripting and sometimes these faces are locked and I do not have the time to recreate them. As such I'm asking a specific question about watchmaker and how it operates. I would ask that you please do not act condescending and pedantic in answering a specific question about a specific program in the future.
Sincerely,
B.D.
BostonDan said:
I use watchmaker and love it. One issue I am having is certain faces have color settings (color for the hands, color for the text, color for the markets, etc). It seems that after setting the colors just the way I like it, within a few hours the colors reset to the default settings.
Does anybody else have this issue and does anybody know how to get the colors to stick?
Any help is appreciated.
Cheers,
B.D.
Click to expand...
Click to collapse
I had the same issue with one watch face I have been using. I ended up solving it when I found a file that configures the defaults for the watch face. I edited the file and changed the variables for the colors and other settings to the way I wanted them to be so when it resets, it goes back to how I want it.
I assume that you could maybe do something similar. On my phone the location of the file was:
/sdcard/BeautifulWatches/scripts
It was just a matter of opening the text file and then changing the values for the variables. Then going on the watch and removing the watch face and resending it to the watch from watchmaker on my phone.
Nx248, thank you. I will explorer the scripts used to try to track down the colors I want. This is helpful. Wish the watch/program would remember the colors though and save me the time in tracking down the script implementation.
Thanks again.
Cheers,
B.D.
BostonDan said:
As such I'm asking a specific question about watchmaker and how it operates. I would ask that you please do not act condescending and pedantic in answering a specific question about a specific program in the future.
Click to expand...
Click to collapse
Please don't be an ass. My advice was a real one and I'm sticking to it. If you want to have something that suits your specific needs, with the specific look, the ONLY WAY to achieve it is to build it yourself. Do not expect others to deliver the perfection for you.
BostonDan said:
Wish the watch/program would remember the colours though and save me the time in tracking down the script implementation.
Click to expand...
Click to collapse
And I'm convinced 100% that you sent that wish to the developer as well ...
If you really want to find out more about the inner workings of a certain software/platform, or to add useful things to it, the easiest way is to contact the developer.
My recommendation is to stop complaining and actually do something to fix your issue. Do not bash on the ones who are trying to share with you their ideas.
ro_explorer,
If there were an option you would like to see on your car would you build a car yourself, or reach out to see if anybody else had implemented the solution. Your responses ARE condescending and rude in the way you come across expecting people to have infinite time to do this. Maybe you have the time to explorer building this yourself but I have other more important things to do which is why I posed the original question.
To quote you, 'don't be an ass. '
I have found a number of people who have offered useful help on these forums and still contend your 'advice' does not address the original question. I would contend that you need to read the questions people post and not write out an answer just to up your post count or 'prove' what a smart ass you can be.
This is the last post I will make on this subject.
B.D.
BostonDan said:
ro_explorer,
If there were an option you would like to see on your car would you build a car yourself, or reach out to see if anybody else had implemented the solution.
Click to expand...
Click to collapse
I'm an engineer and a tinkerer .... I'm ALWAYS implementing my own solutions in ALL technical fields that I understand. I also help others and try to put seeds of creation in everyone else ....
If I ever had to ask for stuff I always asked the producer.
I hope this is answering your concerns.
Other than this I'm really sorry you are sensitive to a level to consider my comments as rude ...
Good luck in your endeavour ... If I can help you again, I will ...
nx248 said:
I had the same issue with one watch face I have been using. I ended up solving it when I found a file that configures the defaults for the watch face. I edited the file and changed the variables for the colors and other settings to the way I wanted them to be so when it resets, it goes back to how I want it.
I assume that you could maybe do something similar. On my phone the location of the file was:
/sdcard/BeautifulWatches/scripts
It was just a matter of opening the text file and then changing the values for the variables. Then going on the watch and removing the watch face and resending it to the watch from watchmaker on my phone.
Click to expand...
Click to collapse
Hi nx248,
I tried changing the script on the phone and resending the watchface to the watch but found that since the script had already been transferred to the watch previously I had to edit the script on the watch.
I accomplished this by adb into the watch and pulling the script to my computer, editing it, and then pushing the script back on the watch to the /sdcard/BeautifulWatches/scripts directory. Alternatively, I think I could have pulled the script from my phone, edited it, and pushed it to the same location.
In any case, I edited the watchface variables so that the default position in the array corresponded to the colors I wanted, which is working.
Thanks for your help. :good:
EDIT: Just saw that you had stated I should delete the watchface from the watch. I don't know how to do this, so I will have to educate myself.
I read the Watchmaker forum and found that if you enter the "change faces" screen on the watch under Watchmaker (usually press at one of the main watch positions - default to 3 o'clock, but can be set to 6,9,12 o'clock) and swipe up on the face you wish to remove, it is removed from the watch.
Cheers,
B.D.