[ROM][i9300][4.3] Illusion v2.5 - 8|25|13 - Galaxy S III Android Development

[ROM][i9300][4.3] Illusion v2.5 - 8|25|13 - Galaxy S III Android Development

Always follow the OP through and through.
The Emulated /0 folder is always going to be there, save all sdcard stuff on a PC or some where else before flashing.
If things are acting weird, or you have things going on and don't see too many people reporting it.
Redownload rom and gapps
Wipe data factory reset
Wipe dalvik and cache
Format System (upon flashing rom it will do this automatically)
Then flash rom and gapps then reboot system. (boot the rom and then go back and flash your kernel of choice, if that's what you choose to do).
Make sure your kernel choice is built after 4-19!! The Dev of the kernel should state that "3.4 linux kernel AOSP" as well in their post. :good:
Also if having issues, boot into safe mode and see if issues still persist. Boot into safe mode by hold power button and long press on reboot. This will boot you into no 3rd party apps mode, basically. To get out of it, just reboot normally
To enable Developer Options, go to; settings|about phone|tap build number 7/8 times
to enable reboot options,(recovery, download) enable advanced reboot in Developer options
Dual Panel mode will cause some weirdness in settings. Turn them of to set everything up and forget about it after.
All the tabletui settings work but nav colors reset after reboot
If you have the "tick" while playing music then disable "Screen lock sound" & "Touch sounds". Temporary work around for now
No PhotosPhere in this rom still...might get added but depends on stability and CyanogenMod
You must flash Gapps everytime you install the rom as it wipes system every time. Use the gapps in the original post, if you use other Gapps keep those errors to your self and adress the person that made those Gapps.
Facebook acts up and is weird?? Stop using the app.
Update system apps before saying things are broken. (Google Now)
If you decide to run a 3rd party kernel, take your issues about; speed, battery, and reboots to that thread, we cant change their kernel to make it better for you, they can. Thanks.
You will not have a 4g icon, it is an H+ when data is being retreived, when idle it is a 3g icon.
BUNCH OF THEME APKS
This is a work in progress, I'll update it as needed FAQ PART
What base is this
It is based off SlimRoms, with a lot of changes... It is it's own rom now
Which MMS app is built in?
A custom one, it has Themeable MMS and Popup. look in screenshots for my goofy face and pictures.
How to activate pie control?
settings>piecontrols>activate toggle. The trigger is at the bottom, slide your finger up slowly, and it will come up.
Where are the Touchwiz features?
In a Touchwiz rom.
How do I take a screenshot?
Volume down & power, OR... settings>powermenu>enable the screenshot.
Does this rom have Tablet mode and such things?
No, and there are no plans for adding it as of now.
Seperate Mods
Multi DPI Play Store- Inverted and normal play store with multi dpi hack.
Inverted Play Store- 4.0.2.6 New Inverted Play Store download, got from here
YouTube- YouTube app that allows Videos to play in HD over Cell Data, and allows screen off playback.
Apollo- Apollo music player. Install like a normal app.

cub3r said:
Interesting, android OS battery drain solved?
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
As far as what I kno, none of my testers have reported it...

I am confused which file I have to download (cm-10.1-20130418-NIGHTLY-p3.zip,cm-10.1-20130418-NIGHTLY-p3100.zip,cm-10.1-20130418-NIGHTLY-p3110.zip)?!

cakerone said:
I am confused which file I have to download (cm-10.1-20130418-NIGHTLY-p3.zip,cm-10.1-20130418-NIGHTLY-p3100.zip,cm-10.1-20130418-NIGHTLY-p3110.zip)?!
Click to expand...
Click to collapse
The link isn't there yet bro... give me about 15 minutes and you'll see it. :good:

@All
Please utilize the Q&A post by mt3g as once it evolves more, the more you will get out of it.
Also, itsmikeramsay and mt3g run pretty chill threads, please keep the discussion to the ROM and valid troubleshooting with proper bug reports.
Above all, if you can answer someone's question in 1 or 2 volleys, then do it. If anything beyond that threshold, then open a Q&A thread for your issue.

cakerone said:
I am confused which file I have to download (cm-10.1-20130418-NIGHTLY-p3.zip,cm-10.1-20130418-NIGHTLY-p3100.zip,cm-10.1-20130418-NIGHTLY-p3110.zip)?!
Click to expand...
Click to collapse
Don't touch any of those. The i9300 one isn't up yet.
Oh and to the op: Why even mention the 3.4 kernel if it's not in this rom? This is the i9300 so only i9300 related stuff should be posted here.
EDIT: Didn't see Woody's post.

I'll give it a try when you finish uploading the files
Sent from my GT-I9300 using xda app-developers app

Thank you guys :good:

ITSMIKERAMSAY! your ROMs were sick for the Ville, can't wait to try this! Thanks man
Sent from my GT-I9300 using xda premium

dr_rick13 said:
ITSMIKERAMSAY! your ROMs were sick for the Ville, can't wait to try this! Thanks man
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thanks bro! Hope you guys really do enjoy this. Been building for d2 devices and decided to expand to i9300. been having users request it, so why not

Woody said:
@All
Please utilize the Q&A post by mt3g as once it evolves more, the more you will get out of it.
Also, itsmikeramsay and mt3g run pretty chill threads, please keep the discussion to the ROM and valid troubleshooting with proper bug reports.
Above all, if you can answer someone's question in 1 or 2 volleys, then do it. If anything beyond that threshold, then open a Q&A thread for your issue.
Click to expand...
Click to collapse
Woody!!!!! Thanks a lot homie! Good looking out

Did i understand the op right - - No more pa settings?
Edit : Ah okay... Only for now.. Hope to See them back in a few Updates

MungoHigh said:
Did i understand the op right - - No more pa settings?
Click to expand...
Click to collapse
I'm redoing it... thats why the build is alpha for right now... There's certain bugs and nuisances that appeared after adding it, so I'll be redoing it. v2.0 is alpha solely because of it. But yeah it'll be back, more than likely next release. I just wanted to get everyone going on this new base. i9300 devices just know this as Xone's first release, but d2 devices know it as a rebase.
It'll definitely be back, but better than what it was before in terms of functionality...

itsmikeramsay said:
I'm redoing it... th why the build is alpha for right now... There's certain bugs and nuisances that appeared after adding it, so I'll be redoing it. v2.0 is alpha solely because of it. But yeah it'll be back, more than likely next release. I just wanted to get everyone going on this new base. i9300 devices just know this as Xone's first release, but d2 devices know it as a rebase.
It'll definitely be back, but better than what it was before in terms of functionality...
Click to expand...
Click to collapse
Okay, good luck and thanks for your effort

Aight folks, builds are now being pushed to "public" view! Give it 5-10 minutes to show in full. I strongly recommend a FULL WIPE/Factory Reset! Refer to mt3g's Q&A section if you have any questions, and refer to the changelog to know what's been changed! Remember peeps, it's "alpha" because Hybrid Settings isn't yet included!!
As always peeps, if you enjoy this ROM or like it, feel free to show some love. It's never taken for granted, and is very very much appreciated!!
Now I gotta get ready to take the wife to the doctor, might be able to find out the sex of my first "spawn of me" today! I'm stoked. Keep the threads cordial peeps, if any bugs are found, please politely inform us! Thanks again peeps!!

itsmikeramsay said:
I gotta get ready to take the wife to the doctor, might be able to find out the sex of my first "spawn of me" today! I'm stoked. Keep the threads cordial peeps, if any bugs are found, please politely inform us! Thanks again peeps!![/SIZE][/FONT]
Click to expand...
Click to collapse
Ahh congratulations and all the best!!
Sent from my GT-I9300 using xda app-developers app

Lets Give a Try
Sent from my GT-I9300 using Tapatalk 2

Got about 50 downloads and no reports on what people think or issues, only thing that tells us is that we did good job lol. Anyone has any words please feel free, just need some "vocal" feedback...

I will definitely give it a shot I will post my thoughts after weekend
GT-I9300 cihazımdan Tapatalk 2 ile gönderildi

Related

[ROM][4.1.2][I9100G] PARANOIDANDROID v2.54 [CM10HYBRID][BUILD FROM SOURCE]

4.2.1 AOSP based Paranoid is here : http://forum.xda-developers.com/showthread.php?t=2132975
Tanks to Black_Prince for bringing it to us, it's time to close this thread until a new CMPA comes...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
More screenshots

To be honest, this is not tablet mode at all, it has nothing to do with silly build.prop hacks. This is the first and only Android rom to feature true Hybrid mode. This rom lets you scale and project every app, every widget, even systemcomponents individually. Remember, android is modular, everything is an app: Lockscreen, navigationbar, dialogs, popups, keyboards, widgets, and your regular apps of course. Apps have the capability to switch into various designs or layouts according to the device they run on. This can result in a complete new experience as many apps will transform to the better.
Now for every element that you like chose a mode (PhoneUI, Phablet/Nexus-7UI, TabletUI) and/or a size. You are 100% independent of the system DPI which runs nicely in whatever value it has been assigned to. You do not need to boot your phone into a certain DPI. Neither will most of the changes you apply require a reboot. You will not suffer from the myriads of troubles which normally haunt you under build.prop tablet mode. Your market, phone, etc. will all work, apps won't shrink on you unless you shrink them yourself. This project will entirely transform your device, but retain the aesthetics and the feel of your phone.
Donations to molesarecoming
to D4rKn3sSyS
to Cyanogenmod
to me

Install Rom
Install Gapps
Wipe caches, factory reset is a must if you're coming from another rom than CM10
CWM -> Advanced -> Fix Permissions (VERY IMPORTANT STEP)**
FAQ & HELP - Read before asking!
Go to Settings, System, Font size, set it to NORMAL
If you have an issue and you want to call our attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and Cyanogenmods aswell (its our base) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Cyanogenmod Project, for CM10
Tina, for images on this thread http://krebsmilk.de/
evilisto, for Sense Recent Apps mod, and basic Tablet mode source
dubidu, for hiding statusbar mod
D4rKn3sSyS and all the paranoid team, for the galaxy S2 rom
Fuss132 for horsepower kernel
Very special thanks to incarnation95 for building 2.52 from source and teaching me how to build from source
Check changelog

VERY Special thanks to all the donators!, you support me for making a better work each day!
http://goo.im/devs/quentin330
To update be carefull to follow the followig steps:
1) reboot in recovery
2) flash the update
3) flash gapps again
4) advanced/fix permissions
5) reboot
How to set the workspace mode
How to change an apps Layout and size

Does this ROM use or have Siyah Kernel? What kernel is it using?

Hey you sure you got siyah kernel for the g version?? ... I dont want to brick my phone!!!!
Sent from my GT-I9100G using xda premium

y2kkingboy said:
Does this ROM use or have Siyah Kernel? What kernel is it using?
Click to expand...
Click to collapse
Kingspp said:
Hey you sure you got siyah kernel for the g version?? ... I dont want to brick my phone!!!!
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
Okay sorry for this, the siyah kernel is used by the I9100 rom but it's not used in this rom, I will delete this line right now (I copied from the original thread that's why it's written)
But I can garanty you won't brick your phone as I'm using this rom right now on my I9100G

quentin330 said:
Okay sorry for this, the siyah kernel is used by the I9100 rom but it's not used in this rom, I will delete this line right now (I copied from the original thread that's why it's written)
But I can guaranty you won't brick your phone as I'm using this rom right now on my I9100G
Click to expand...
Click to collapse
You really got me shocked for the siyah kernel.... God I was excited... Well otherwise thanks for porting....
Sent from my GT-I9100G using xda premium

One more thing.... How can you port I9100 cm9??? Your cm9 links lead to it.... Which cm9 have you used as base???
Sent from my GT-I9100G using xda premium

Kingspp said:
One more thing.... How can you port I9100 cm9??? Your cm9 links lead to it.... Which cm9 have you used as base???
Sent from my GT-I9100G using xda premium
Click to expand...
Click to collapse
I used the 20120618 nightly from I9100G, again I didn't edit the thread enough, thank you for the notice

On CM9 my SGS2G is not able to play sound (Music or speech commands of my navigation app) properly while GPS is searching a signal. It is always interupting. Could someone please check if this issue is fixed on this ROM?

Looking nice

this rom do i need flash CM9 before flash it or just i can install from any ics rom??

good to see this rom

I'm happy to see this for our G! thanks! downloading right now and will give a feedback asap...
hope everything goes well

Hello, thank you for porting the ROM. Before I do this, just to double confirm, IF I am currently using CM9, do I still have to do factory reset? Or straight flashing over CM9 without factory reset will do? Once again, thank you so much. =)

walauu said:
Hello, thank you for porting the ROM. Before I do this, just to double confirm, IF I am currently using CM9, do I still have to do factory reset? Or straight flashing over CM9 without factory reset will do? Once again, thank you so much. =)
Click to expand...
Click to collapse
It's best if you do factory reset after flashing a new rom to avoid complications.
OT : I'll be testing this thoroughly and will report bugs for you.

Anybody installed this rom? Kindly give the feedback....

Review (Screenshots)
Well this rom is all about the looks... so here are a few..
My current Settings:
System dpi : Custom dpi: 160dpi
Statusbar dpi : Custom dpi : 150dpi
Google Playstore:
Youtube:
Default Camera:
Contacts:
Settings:
Default Calender:
Default Dialer:
App Drawer(Nova Launcher):
Default Calculator:
Poweramp:
Bugs/Cons:
Default Browser(Different from the preview in OP):
Settings (Different from the preview in OP):
"Mainly" (No sense Recents and statusbar Transperency)
Recent Apps(Long press of home menu)(Different from the preview in OP):
To the dev:
Excellent work....Thanks a lott... Finally a tablet rom for the g version..
Did not find any major bugs...
Quite fast...but slower than cm9(Boot time)
Custom dpi settings for every app, status bar, system ui.
Can be used on daily basis.
Please see to the cons and try to change the appearences in the next update!
Samsung Galaxy S2 GT I9100G
Rom: Paranoid Android(Custom Dpi)
Kernel: Cm9 Kernel

@Kingspp, your attachment cannot be viewed. Please update, thank you. =)

walauu said:
@Kingspp, your attachment cannot be viewed. Please update, thank you. =)
Click to expand...
Click to collapse
Updated...
Sent from my GT-I9100G using xda premium

I am very excited to try it thanks alot

[rom][tc] paranoidandroid 2.21 jb 4.1.2 [13-10-2012]

This rom is compiled from sources of paranoid android and I also used cooper sources from Jellaxy sources, So you can donate to Paranoid developers as well as The whisp and other team member
I'm doing this only as hobby so no eta , when I get time Ill fix bugs and update rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

If you have an issue and you want to call our attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and Cyanogenmods aswell (its our base) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Paranoid team http://www.paranoid-rom.com/
jellaxy team for cooper sources
lagloose Donate to him http://forum.xda-developers.com/member.php?u=830447
erikcas Donate to him - http://forum.xda-developers.com/member.php?u=985241
Thewhisp Donate to him http://forum.xda-developers.com/member.php?u=4148720
CallmeVentus for helping me all time http://forum.xda-developers.com/member.php?u=4188357
Teamcooper
and me donate if you want https://www.paypal.com/in/cgi-bin/w...63663d3faee8d0b7e678a25d883d0bcf119ae9b66ba33

Downloads and changelog
Guys donate to all credited people and also to me if you guys happy with our work
Download
http://www.mediafire.com/?3aqzvgdv7llcvg4
How to install
wipe data
wipe cache
wipe dalvic cache
then install
Bugs
1) HQ video playback (need OpenMAX libraries from Qualcomm, unfortunately, they are not going to release them)
2) Native USB tethering
3) Native Wi-Fi tethering
4) Videorecording
5) Google Now (Voicesearch)
http://paranoid-rom.com/forum/changelogs-news
Date 13-10-2012
camera with preview fixed ( thanks to lagloose for his camerahal)
JB 4.1.2
Paranoid 2.21
reboot problem fixed ( need confirmation)
some other changes/fixes
Alpha 2
All hangs and fc of system fixed
You can use paranoid setting
Much stable as same as cm10 and aokp
paranoid 2.15
How to set the workspace mode
How to change an apps Layout and size

Wowww First
xD
Downloading and Test ;D

So we cant use paranoid settings at all?

look nice rom.. i'll try downloat it and flash..
thanks nims:good:

diegonnc said:
So we cant use paranoid settings at all?
Click to expand...
Click to collapse
yep atleast for this build but this app only define density of each app that you set and phone/tablet mod
and you can do this by yourself simply adding your mode/density in properties.conf bit difficult for noob but advance user can do this
its first build so some bugs are always expected

nims11 said:
yep atleast for this build but this app only define density of each app that you set and phone/tablet mod
and you can do this by yourself simply adding your mode/density in properties.conf bit difficult for noob but advance user can do this
its first build so some bugs are always expected
Click to expand...
Click to collapse
Okay, i guess i will wait for your next version then, thanks and keep it up:good:

this is pretty rom dude
but my device have a problem with apollo and gallery.
gallery and apollo is empty.
I got this trouble with all CM10 rom.
can u help me ?

Good will test it
Inviato dal mio iPad con Tapatalk HD

wow i try it now

Update
Rom updated and all hangs and fc of system fixed
Only paranoid wallpaper app fc but not big issue will fix next time

How's the battery?

The Zel said:
How's the battery?
Click to expand...
Click to collapse
same as you get with any jb rom with my kernel

nims11 said:
same as you get with any jb rom with my kernel
Click to expand...
Click to collapse
the phone in the screens are ace??because I see google chrome ??

What is not working ??

Nims ?
Are u also going to build pa ics ?
Sent from my GT-S5830 using xda premium

OWOOO download and Test Again xD
i like this Rom

CoolCatGetHome said:
Nims ?
Are u also going to build pa ics ?
Sent from my GT-S5830 using xda premium
Click to expand...
Click to collapse
Dont know right now but main thing is sources of ics paranoid not updated from too long around 2 months I think

nims11 said:
Dont know right now but main thing is sources of ics paranoid not updated from too long around 2 months I think
Click to expand...
Click to collapse
Hmm... Okay
Hoping for it
Thanks
Sent from my GT-S5830 using xda premium

Navbar in tablet mode works ??
Navbar in bottom statbar ¿
Didnt had time to flash jb version of pa »p
Sent from my GT-S5830 using xda premium

[ROM][Hybrid][N8000][4.1.2] >> Paranoid Android v2.23 << [21/10][WIP]

Click to expand...
Click to collapse

v2.23 (21/10/2012)
- Initial Galaxy Note 10.1 release
Click to expand...
Click to collapse
¤ Our webpage: http://www.paranoid-rom.com/
¤ Want to know if your device is supported ? Here's the list of Paranoid builds and ports
¤ You want to build PA from sources ? Check out this guide : http://forum.xda-developers.com/showthread.php?t=1863547
¤ You want to port PA? Take a look here: http://forum.xda-developers.com/show...php?p=27558806
¤ Themes and other goodies you can find here: http://forum.xda-developers.com/show....php?t=1646034
¤ Go to Settings, System, Font size, set it to NORMAL
¤ Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen
¤ Trebuchet Settings: margins:SMALL, show permanent searchbar:YES, Grid: 4x4, resize all widgets:YES, Wallpaper scrolling: OFF
Click to expand...
Click to collapse
This is fully built from sources, but remember this is a work in progress, so please consider it as such.
Neither me nor the Paranoid Android team will be held responsible for ANY kind of damage or issue or thermonuclear war triggered by flashing this rom.
YOU are the one who decide to flash a rom and modify your device, so you assume the consequences.[/B]
Known Issues :
- All CM10 known issues
- In Phone UI Mode, the soft-buttons might not show up at boot. Go to settings/system/Navigation Bar and enable it.
- Report yours after reading below
If you have an issue and you want to call our attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Try aorth's cm10 to see if you have the same issue there. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread and Cyanogenmods as well (its our base) for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Click to expand...
Click to collapse
¤ Cyanogenmod Project, for CM10
¤ The Paranoid Android Team and everyone who worked on this project
¤ D4rKn3sSyS for his work in the Paranoid Android Team
¤ molesarecoming for his work in the Paranoid team and for his Galaxy Nexus PA rom.
¤ aorth for setting up the device trees
¤ Tina for images on this thread
¤ evilisto for Sense Recent Apps mod, and basic Tablet mode source
¤ dubidu for hiding statusbar mod
¤ Nordpolcamper for Paranoid Darkness themes
¤ gokussjx for his friendly help and for sgs3 pa builds
¤ Isherif for dedicated and friendly beta-testing
Click to expand...
Click to collapse

Androguide.fr said:
HOW TO SET THE WORKSPACE MODE

[/FONT]
[/CENTER]
Click to expand...
Click to collapse
I have following your method for installing this rom. but i got bootloop paranoid logo. can you tell me why that i got? thanks b4. sorry for my bad english.

This took me completely by surprise!! Thanks for the hard work, I've been looking forward to some development on this device. I'll have to try out this ROM very soon. I'm a big Paranoid Android Fan from Galaxy S3.

puisicintaqu said:
I have following your method for installing this rom. but i got bootloop paranoid logo. can you tell me why that i got? thanks b4. sorry for my bad english.
Click to expand...
Click to collapse
Did you perform a full wipe ?

Thank you for taking interest in GN10.1. We really appreciate it.

Thank you so much for your work on this tab. I've been dreaming of paranoid android on this tab for ages cos I have it on my s3 and I know its very nice for customizing every app just the way I want. However the link to the rom is down. Or am I doing something wrong?
Edit: found the rom by manually browsing androguide's folders on goo. I'll flash and report
Sent from my GT-N8000 using Tapatalk 2

when a hello rom for galaxy note 2 N7100?

So, will this work on the Wi-Fi-only version? the 8013?

lsherif said:
Did you perform a full wipe ?
Click to expand...
Click to collapse
Yes thanks buddy. The rom can runing. but need more time to boot up the paranoid wellcome logo. but i have question. why in this rom no button screen for back, home, and other like stock rom. that is the bugs? thanks before.
I'm sory for my bad english.

This is so freaking cool. Been waiting for this, BRILLIANT!!! Thank you and welcome, you now put me in a very tough spot. I use my device in universtity every day taking notes and so far i used SNote to do that. So all my notes are in snb format and i dont know of any other app reading that format, and i need my notes......F**K!!!
Welcome and thank you for your hard work

Does this ROM have the new per-app-colour feature that is in V2.50 of Paranoid Android that has just come out?

puisicintaqu said:
Yes thanks buddy. The rom can runing. but need more time to boot up the paranoid wellcome logo. but i have question. why in this rom no button screen for back, home, and other like stock rom. that is the bugs? thanks before.
I'm sory for my bad english.
Click to expand...
Click to collapse
If the soft buttons don't appear at first boot, just go to Settings/system/Navigation Bar and enable it
KingRamo said:
Does this ROM have the new per-app-colour feature that is in V2.50 of Paranoid Android that has just come out?
Click to expand...
Click to collapse
As you can see this is stil v2.23 so no it doesn't yet. Won't be long before next build however.

Awesome to see this mod for the N8000! Is there a S-Pen framework included? Such like this.

DNS007 said:
Awesome to see this mod for the N8000! Is there a S-Pen framework included? Such like this.
Click to expand...
Click to collapse
The S-Pen should work (with compatible apps) but no gestures included, didn't hear about it but it looks interesting, I'll see if I can manage to implement it in future builds, thanks for the tip :good:

For study notes I need mostly the screencapture feature with area selection. Is there an alternative for non Samsung roms? The pen button is only nice to have Btw, does the eraserside of pens with this feature work?

Setting paranoid preferenes doesn't work for me. The dpi sliders aren't active. When i change the interface and reboot, everything's back to phone mode. Am i doing something wrong?
Sent from my GT-N8000 using Tapatalk 2

puisicintaqu said:
Yes thanks buddy. The rom can runing. but need more time to boot up the paranoid wellcome logo. but i have question. why in this rom no button screen for back, home, and other like stock rom. that is the bugs? thanks before.
I'm sory for my bad english.
Click to expand...
Click to collapse
Just go to settings------navigation bar & activate soft keys from there.

any plans for an n8010/8013 build?
Sent from my SGH-I717 using Tapatalk 2

mandog202 said:
any plans for an n8010/8013 build?
Sent from my SGH-I717 using Tapatalk 2
Click to expand...
Click to collapse
Yup. I ain't got much time these days but I will in the near future

Androguide.fr said:
Yup. I ain't got much time these days but I will in the near future
Click to expand...
Click to collapse
sweet! looking forward to it!

[ROM][JB]King Kang for Atrix

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For
Motorola Atrix
What is King Kang?!?
King Kang is essentially a hybrid ROM - its a mixture of AOKP, CyanogenMod, and ParanoidAndroid, bringing all their customizations to one rock solid and quick ROM. These numerous features combine to create a blend of features not seen anywhere else before. Make the user interface yours with this ROM. Change the DPI the ROM runs at, tweak the interface to your hearts content, while enjoying great battery life and stability. Never before have these features combined to create a ROM as feature-packed as King Kang. Credits for the features goes directly to the teams responsible - AOKP and CM for their respective work, and ParanoidAndroid for their wonderful DPI on-the-fly modifications. Without these teams, this ROM would not be possible.
Click to expand...
Click to collapse
How To Flash
Place ROM onto phone storage
Reboot to recovery
Make a Nandroid
Install Rom: Wipe INSIDE ROM
When you select "Reboot Not", you'll get a CWM error, IGNORE IT
Install OPTIONS or Gapps
WIKI/FAQ Located: To be reworked
Click to expand...
Click to collapse
PLEASE NOTE: I will NOT provide ParanoidPreferences.apk in this ROM zip. The devs of that great ROM have asked that the particular apk NOT be included in NON-PA zips. They put in the work, so I respect their wishes. That being said, I will NOT link the file nor do I want to see it linked here.
To get it, do the following:
Boot into King Kang and set up Gapps
Download Paranoid Android ROM zip
Download Root Browser
Use Root Browser to extract the file from the PA zip
Place it into /system/app
Set permissions to RW, R, R
Reboot
Click to expand...
Click to collapse
To successfully set Tablet mode in King Kang, follow the following steps....
Go into settings
Go into ROM Control
Go into Navigation Bar and enable bar, allow SU
Go back and go into General UI
Click Force Tablet UI and reboot manually
Once you come back from the reboot, go into Settings
Go into Paranoid Settings
Go into Workspace
Click on what mode y
Click to expand...
Click to collapse
Bugs??:
KNOWN ISSUES:
Videocamera : Use VideoCam Illusion
Slight Lag possible on screen transitions
USB tether
The graphics related issues are due to not having proper drivers to use for this. Don't ask for an ETA on a fix. Moto won't be giving us the drivers, so there is no fix
If you need to report a NEW bug, report it once, and the next TWO people VERIFY it. I don't need everyone reporting same bug 20 times. I you can, provide me the following information:
Version you're using
What type of fwipe you did and what ROM you came from
Have you restored any data from something like Titanium Backup
What app is misbehaving and what you were doing when it started
Logcats<--THIS IS PREFERRED.
If you don't know how to logcat, go HERE and learn. This really nice guy took the time to write out a good how to
When you have a LOGCAT and would like to post it, please go to pastebin and post it in there, then LINK that location in this thread...I don't want to see them posted directly in here.
Click to expand...
Click to collapse
Downloads:
ROM file is Located HERE
Options Chooser is Located HERE
My latest CWM: V1 as well as Aroma-Prep
can be downloaded HERE
Click to expand...
Click to collapse
Credits:
AOKP, Paranoid Android, Cyanogenmod, and King Kang Teams-Without all of them, this ROM doesn't exist
scott.hart.bi=for helping me with source building
Jokersax11-for being my initial inspiration on Atrix, being a cool guy, and helping me along in my early days
Amarullz=for creating the Aroma Installer
Spleef-for collaborating on those first builds that got me into Android
Alcapone263-for donating an Atrix coming to a home near me
All my testers and users
Anyone else I may have forgotten
Click to expand...
Click to collapse
Kernel Source: HERE
Click to expand...
Click to collapse

Mine

Mine 2

Th3Bill said:
Mine 2
Click to expand...
Click to collapse
Mine 3
Bill just wanted to thank you, like everyone else that will be flooding this thread. Thanks for sticking around and continuing such great development!

jeffreygtab said:
Mine 3
Bill just wanted to thank you, like everyone else that will be flooding this thread. Thanks for sticking around and continuing such great development!
Click to expand...
Click to collapse
Way I look at it, these 2 devices (Photon and Atrix) were the ones I started with, so as long as we can make viable roms on it, I'm going to

Pretty Slick so far. Will run for a couple days. Thanks th3bill

Sounds AWESOME
Just waiting for some screens to give it a chance ;3

Sounds awesome; where will I find the corresponding gapps?
Regards

redThd said:
Sounds awesome; where will I find the corresponding gapps?
Regards
Click to expand...
Click to collapse
Can either use Options overflash or the Gapps by EPinter. There are also some by Justinbean that are pretty good too

I'm getting 'set_perm:some changes failed' at the end of the installation process :crying::crying::crying::crying:
I'm getting the same fault on liquid as well so I think I have put the saved logs here?

Hardware acceleration is not worikng, wright??

barry_ said:
I'm getting 'set_perm:some changes failed' at the end of the installation process :crying::crying::crying::crying:
I'm getting the same fault on liquid as well so I think I have put the saved logs here?
Click to expand...
Click to collapse
Ill fix tonight
Sent from my LG Optimus G

WiFi not turning on at all for me no matter what configuration chosen during installation and with all possible wipe combinations Pressing WiFi does nothing.
Newest AOKP does not have this issue, running it now.

I installed it over latest cm10 from the bill. Just wiped cache and dalvik. The Rom is running fast and smooth without any issues, every thing is ok including WiFi.
Sent from my MB855 using xda app-developers app

Must be me then....

I think he is saying try AOKP then flash this rom. It's worth a try.
Sent using my Jelly fingers.

I never use WiFi much so I didn't notice. Its borked as stated above.
Other than that nice ROM.

I can confirm, also, that WiFi does not turn on with this ROM. Th3Bill did post in the Liquid Smooth thread that he would be posting a fix for this very soon.
Thanks Th3Bill!!

Thanks for the ROM, nothing to report other than a thanks.
redThd said:
WiFi not turning on at all for me no matter what configuration chosen during installation and with all possible wipe combinations Pressing WiFi does nothing.
Newest AOKP does not have this issue, running it now.
Click to expand...
Click to collapse
homerwasa said:
I never use WiFi much so I didn't notice. Its borked as stated above.
Other than that nice ROM.
Click to expand...
Click to collapse
blumenthala said:
I can confirm, also, that WiFi does not turn on with this ROM. Th3Bill did post in the Liquid Smooth thread that he would be posting a fix for this very soon.
Thanks Th3Bill!!
Click to expand...
Click to collapse
Unless a new build is up, wifi is working for me as normal.

I was able to finally get wifi to work. I installed paranoid android first and then installed KingKang and everything works beautifully - including wifi!!!

[ROM]{4.4.2}Validus by GZRoms [Galaxy Tab 2 7" - p31xx][AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DOWNLOAD
p3100= http://www.androidfilehost.com/?fid=23487008491965880
http://d-h.st/N9r
p3110= http://www.androidfilehost.com/?fid=23487008491965790
http://d-h.st/0rG
Install Instructions
Wipe the big 3 and format system from recovery
Flash ROM
Flash Gapps
Reboot
!!Profit!!
Our g+ community.
Ground Zero ROMs G+
Our Git
https://github.com/ValidusAOSP
Not responsible if your device explodes, your dog runs away, your spouse leaves you for your dog, the shoe factory in a third world country shuts down and you can't get your Nike's anymore or anything else that may or may not happen after flashing Validus. If it gets you laid, we'll gladly accept credit for that.

Mine.

CrackerTeg said:
Not responsible if your phone explodes, your dog runs away, your spouse leaves you for your dog, the shoe factory in a third world country shuts down and you can't get your Nike's anymore or anything else that may or may not happen after flashing Validus. If it gets you laid, we'll gladly accept credit for that.
Click to expand...
Click to collapse
You're really a joker, cracker, & funny! Hope you're custom ROM isn't. :laugh:
Thanks! ROMs keeps on coming for our Tab 2. Will revert for feedback after download & install.
Btw, any hint on the kernel included with the ROM? I'm a dual-boot & F2FS fan and keen on retaining both in any new installation.

daeinnor said:
You're really a joker, cracker, & funny! Hope you're custom ROM isn't. :laugh:
Thanks! ROMs keeps on coming for our Tab 2. Will revert for feedback after download & install.
Click to expand...
Click to collapse
I try. I just changed up the look of the OP to give a better feel. I hope you enjoy the ROM. I do.

CrackerTeg said:
I try. I just changed up the look of the OP to give a better feel. I hope you enjoy the ROM. I do.
Click to expand...
Click to collapse
which GAPPS do you recommend with this ROM ?

lokesh.3440 said:
which GAPPS do you recommend with this ROM ?
Click to expand...
Click to collapse
I use PA but whichever you feel comfortable with.

Btw, any hint on the kernel included with the ROM? I'm a dual-boot & F2FS fan and keen on retaining both in any new installation.

Bundled kernel doesn't include those options. It's a cm based kernel for stability. Those options are on the end user. Bear in mind, support is limited once a custom kernel is used.

CrackerTeg said:
I use PA but whichever you feel comfortable with.
Click to expand...
Click to collapse
Thanks for yet another new rom for the Gtab 2, I see there is also a GZ build for grouper. I will try GZ on both devices. Regarding the gapps, is there any advantage in using the NellyWhad gapps that I saw on your G+ forum?
It seems there are lots of different mods in those gapps, so what do you think?
Thanks again,
Mike T

webdroidmt said:
Thanks for yet another new rom for the Gtab 2, I see there is also a GZ build for grouper. I will try GZ on both devices. Regarding the gapps, is there any advantage in using the NellyWhad gapps that I saw on your G+ forum?
It seems there are lots of different mods in those gapps, so what do you think?
Thanks again,
Mike T
Click to expand...
Click to collapse
I personally don't use those mods which is why I use PA. If those mods are your thing, feel free to use Nelly's gapps.
I've been running the rom on my tab for weeks but it wasn't ready for prime time until now.

CrackerTeg said:
I personally don't use those mods which is why I use PA. If those mods are your thing, feel free to use Nelly's gapps.
I've been running the rom on my tab for weeks but it wasn't ready for prime time until now.
Click to expand...
Click to collapse
Yeah, that's what I thought. I don't really like adding too many extra mods to my roms either, thanks for your reply.
Mike T

No problem. As Nelly's gapps are aroma based, you don't have to select those mods if you don't want them.

CrackerTeg said:
No problem. As Nelly's gapps are aroma based, you don't have to select those mods if you don't want them.
Click to expand...
Click to collapse
Btw, your bootanim and wallpaper scared the crap out of me with with the Killer Klowns. LOL I just finished installing on my N7, as it's easy with multirom to check it out and at first glance it looks pretty cool. Will install later on my Gtab.
Lots of features and a very creative system ui, I like that you embedded Omni Switch into the build, as it's one of my favorite apps. The only minor glitches I came across so far are Validus Explorer force closes, in settings "disable force close notifications" is misspelled "diable" and when you click for the various available gapps packages in settings, NellyWhad goes to a dead link.
No showstoppers but I figured I'd just mention it. As for Validus Explorer, if it's based on Slim Explorer, the force close may just be relative to the N7 as Slim Explorer also force closes on it.
Overall, looks like a really nice user experience.
Thanks,
Mike T

webdroidmt said:
Btw, your bootanim and wallpaper scared the crap out of me with with the Killer Klowns. LOL I just finished installing on my N7, as it's easy with multirom to check it out and at first glance it looks pretty cool. Will install later on my Gtab.
Lots of features and a very creative system ui, I like that you embedded Omni Switch into the build, as it's one of my favorite apps. The only minor glitches I came across so far are Validus Explorer force closes, in settings "disable force close notifications" is misspelled "diable" and when you click for the various available gapps packages in settings, NellyWhad goes to a dead link.
No showstoppers but I figured I'd just mention it. As for Validus Explorer, if it's based on Slim Explorer, the force close may just be relative to the N7 as Slim Explorer also force closes on it.
Overall, looks like a really nice user experience.
Thanks,
Mike T
Click to expand...
Click to collapse
The bootani takes some getting used to. lol
For whatever reason, the bootani for the gtab is the default cm one. Not sure why.
We're aware of the "diable" spelling. It isn't a big priority as long as it works (which it does). Wasn't aware of the dead link for Nelly's gapps. I'll bring it up. Validus explorer is based on Slim's. I just freeze it as I personally prefer ES.
Glad you're liking it so far. :good:

Nice work bro ! :thumbup::thumbup:
Some screenshoys would be nice .
Sent from my GT-P3100 using Tapatalk

There are screen shots. Look again.

kunjcool said:
Nice work bro ! :thumbup::thumbup:
Some screenshoys would be nice.
Click to expand...
Click to collapse
CrackerTeg said:
There are screen shots. Look again.
Click to expand...
Click to collapse
Right CrackerTeg, there used to be screenshots before you changed up the OP look! It doesn't show up now in this MBP?
Haven't got the chance to test your rom - busy at work. Probably over the weekend.

And does this rom have the settings to set omni recents as the default recents ??... So that when i press the recents button in the navigation bar , omni recents open up
Sent from my GT-P3100 using Tapatalk

daeinnor said:
Right CrackerTeg, there used to be screenshots before you changed up the OP look! It doesn't show up now in this MBP?
Haven't got the chance to test your rom - busy at work. Probably over the weekend.
Click to expand...
Click to collapse
The second image in the OP is a bundle of screens. The team felt this OP was more uniform.
kunjcool said:
And does this rom have the settings to set omni recents as the default recents ??... So that when i press the recents button in the navigation bar , omni recents open up
Sent from my GT-P3100 using Tapatalk
Click to expand...
Click to collapse
Omni recents? Check in Pandoras box for the recents switcher. It's either sense or slim. If you're taking about omni switch, that's under navigation.

CrackerTeg said:
The second image in the OP is a bundle of screens. The team felt this OP was more uniform.
Click to expand...
Click to collapse
Yep, now it shows. It was a missing link this morning (this part of the world)!
Agree, it's uniform with the credits & a lot better than initial look.

Database Develop

welcome