Related
Good evening, this is my first post and I'm really happy, I can finally boot a debian on my wildfire, for this I have been guided by manuals for the rest of htc.
As sure a lot of people wanting to play the first thing to do is upload it and explain how it starts, then we can go into details of how and why.
The startup script has a lot to improve and certainly there are some things that are no longer necessary, but I think the first thing is that everyone can enjoy, and after that I dedicate to improve them.
The only thing you need to modify in the phone is to get the root user, I personally used unrevoked for this, besides being very simple, makes available the backup utility nandroid among others, have not tried other methods but I think that any method that can get the root on the adb console, should work
The procedure is very easy and I give you everything you need:
- Compiled binary of busybox
- Start script
- Image file system for ARM Debian Lenny
- ADB download from the official website of android
- Unrevoked 3 there are many guides on how to do, practically only have to download and follow the instructions
Step 1
- Moving files to mobile
-Enter the abd console and create the folder /data/local/bin and /sdcard/debian
-Copy the image file on the sd folder (you can mount as massive storage mode)
-copy Busybox and boodeb.sh to the folder /data/local/bin, for this use
adb push busybox /data/local/bin
adb push bootdeb /data/local/bin
- Set the appropriate permissions, open adb shell and passed to root (in my case just do 'su' and accept the message I apacere on the mobile screen) and run
cd / data / local / bin
chmod 555. / busybox
chmod 555. / bootdeb.sh
Step 2
- Basically enjoy
- In a console as root run
cd /data/local/bin
./Busybox sh bootdeb.sh
and now you are in a debian shell ready to play and break, keep a clean copy of the image file this is the best rollback that I know.
to exit the chroot only do exit, and you can see a restart of the phone, this is to make everything fair, this probably is not necessary because I have noticed that everything was removed successfully, but for now better that way, and later i'll depurare the script to see what can i do.
I'll attach the files and if I have time I put a few catches, excuseme for errors, I will be watching the thread to respond to everything that Ican.
I'll put the filesystem image on mediafire, but is too slow, you can search for debian_aosp21_fisadev zip, it's the same image, i'll put the link when it end, now i go eat
Nice hack! Do you have any need for this or did you just do it because it could be done?
it's ok and running, later wil improve more eficient scripts
with this you can start playing, from this point you can start implementing the rest of guides for debian in G1, ect ... get X11 vnc I will try to bring my own apps server and mail server in my pocket
You stole my idea . Isn't it funny when two people think of the same thing at once and independently? I've also managed to run Debian on my wildfire. My method is much less sophisticated though. it wouldn't even need adb and soft root is perfectly sufficient.
What tool did you use to generate the image? I used debootstrap. Quite easy IMHO, once you have root and busybox binary. But that comes from Debian user.
As far as I can see, your method is more of a chroot than boot. IMHO, only loading your own kernel into the memory would constitute "booting".
xc1024 said:
You stole my idea . Isn't it funny when two people think of the same thing at once and independently? I've also managed to run Debian on my wildfire. My method is much less sophisticated though. it wouldn't even need adb and soft root is perfectly sufficient.
What tool did you use to generate the image? I used debootstrap. Quite easy IMHO, once you have root and busybox binary. But that comes from Debian user.
As far as I can see, your method is more of a chroot than boot. IMHO, only loading your own kernel into the memory would constitute "booting".
Click to expand...
Click to collapse
Well, it's normal, really starting in a chroot, but for me is a good starting point to playing. For me upload or not upload your own kernel is indifferent, with the current android kernel for now is sufficient, since it provides the necessary, currently i'm setting up a new image with debootstrap, initially I used the image posted in one of the G1 tutorial and the busybox binary too, if I find the url of the tutorial I put it.
Really is not necessary to use ADB, you can also do from a terminal on the phone, and as I said any method that allows root think it will be valid, but for me it is much more comfortable working on the pc and get rooted with ureboked.
My next steps are try to provide it with swap, graphical environment, ssh (done), vnc-server, webserver and mail server, refine the scripts and later, when get boring i try other things as dual boot, native filesystems etc ... and of course try to help some people to get running
For now I have enough to play a few days
as I promised, here is the links to donw my initial image filesystem of debian lenny,
h t t p : / / w w w . me d i a f i r e . c o m / ? l 9 t 6 i 2 0 y z 4 g o 7 5 8
h t t p : / / w w w . m e d i a f i r e . c o m / ? l 9 t 6 i 2 0 y z 4 g o 7 5 8
later i'll post links for new images with more things, only need replace the file and go playing to next level
sorry, but I can't post links, drop the espaces and go
everend said:
sorry, but I can't post links, drop the espaces and go
Click to expand...
Click to collapse
Here is the link made for you
Hope that helps
some sceenshots
some sceenshots
Really cool! Great work everend.
Will definetly follow this thread.
Now sawping on file is running, i'll upload the next image when finish the vnc setup and improbe some things in the script to sure the ending of chroot enviroment and i'll create one aditional script to make easy the use of terminal emulator on android, this script will do things as alter pach to get /data/local/bin and make some alias, and i'll post how to configure terminal emulator to autorun this.
thanks, i'm playing, i'm happy, let's play
Thanks a lot.
Before I want to do it but I can't to it hack!
Thanks
Keep your nice work!
:x
Sent from my HTC Wildfire using XDA App
X11 LXDE runnig!!!!
playing, playing
tremendous work! Now I just wish I could find a way to port linux or even better Android to a BlackBerry device!
It's dont work on CM!
Please optimize it for CM.
(and evered, please chek your PM!)
now, i'll resume this, but i can't test on CM because i use the original firmware + unrebocked on my phone.
THE DEBIAN IMAGE FILE IS LINKED HERE.
xc1024 said:
You stole my idea . Isn't it funny when two people think of the same thing at once and independently? I've also managed to run Debian on my wildfire. My method is much less sophisticated though. it wouldn't even need adb and soft root is perfectly sufficient.
What tool did you use to generate the image? I used debootstrap. Quite easy IMHO, once you have root and busybox binary. But that comes from Debian user.
As far as I can see, your method is more of a chroot than boot. IMHO, only loading your own kernel into the memory would constitute "booting".
Click to expand...
Click to collapse
Would you explain your simple method?
You can download it when click here!
http://wildfire.devs.parandserver.com/debian/debian_aosp21_fisadev.zip
You can download it when click here!
http://wildfire.devs.parandserver.co...21_fisadev.zip]
Click to expand...
Click to collapse
@MohammadN.
Are you able to boot the debian?
PLEASE READ FIRST
This post will have info on the chroot method. To find out info on running Ubuntu natively on the Adam, click this link for post #2 below. Enjoy
chroot Method:
chroot Ubuntu on Adam Beta1...
For now project files for chroot method will be located at this Google Code Project site. Files will be posted shortly, stay tuned.
DO NOT attempt this yet until specified as alpha or beta or otherwise stated as ready for testing!!
Liability:
I'm not responsible for what you do with your device, this is a guide or tutorial for general purposes only.
If you do not have a strong understanding of rooting and how to recover a device from scratch DO NOT attempt this until we are our of beta stages. Wait till you see RC status at least.
Verified working with bugs
Directions:
I'm not sure what file format is needed on the SD card, so make sure it has the stock file format from Android.
Make sure you are rooted using the methods listed here or Notion Ink Hacks Forum.
Download necessary files:
- Main scripts: Download from Google Code Project webpage. http://code.google.com/p/chroot-ubuntu-ni-adam-tablet/
- Ubuntu.img file: Download from MegaUpload. http://www.megaupload.com/?d=3ZQTCUUN
Create a folder on root of your Adam SD card called "ubuntu" and download the files from the Google Code Project site to this folder.
Unzip "ubuntu.img.zip" package and copy or move "ubuntu.img" file to the ubuntu folder you created above. Delete all the rest of the files. Do this to make sure you do not confuse the scripts I've put together for the Adam.
Plug Adam into your computer and make sure you have a connection to it.
Android SDK installed on a local computer with ADB functioning.
Make sure you do not have the SD card mounted on your computer. Also make sure USB Debugging is turned on, which I think you need for ADB.
Change the name of "bootubuntu[x].[x]" to just "bootubuntu"! DO NOT use the original "bootubuntu" file.
If you haven't already open a command prompt and type:
Code:
adb shell
Enter superuser mode:
Code:
su
Change directory to the "ubuntu" folder:
Code:
cd /sdcard/ubuntu
Run the setup script (You should only have to run this once or whenever new updates to the files are released):
Code:
sh ./ubuntu.sh
Once the script finished you should be good to go, type the following to run Ubuntu:
Code:
bootubuntu
If you see something like the following below, job well done!
Code:
[email protected]:/#
Troubleshooting:
If you get any errors, please FIRST, try rebooting Adam and start back at "adb shell" step 7 and try again.
More to come
If you get any errors, please post at what step number you got an error and post as much detailed info as you can about the error. Myself and others will do what we can to help.
Resources:
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
http://tegradeveloper.nvidia.com/tegra/forum/workaround-run-ubuntu-now
Native Ubuntu Method:
More to come, holding this place for future use...
No problem for testing it ... but not before the end of next week
My Adam will be send on 31st of January
There is nothing to test yet. Not until more research is done and files gathered. Not to mention we still need full root and unlock first.
Do not attempt to run the files in that link.
Sent from my Evo
For Rooting Adam it seems that it's done ?
And Don't worry i will not try to use fill that wasn't for Adam.
If you need help ... to search, test ... I will be part of ;o)
Thanks Gkar! Just be sure to follow this thread as any updates will appear here.
Also, root methods have been started but there are bugs. We need Adam users to help with that process first before helping here. Once that process works consistently I plan to get started on this.
Sent from my Evo
Pfffff ... I've just seen on pre-order page that my date has been pulled to 14th feb 2011 and then i will have to wait to test !!
Ubuntu netbook edition
Btw, I am sure you have seen this, but Ubuntu does have a Netbook Edition. It brings all the advantages of Ubuntu to a netbook – using Unity, an innovative user interface super-optimised for smaller screens and also convenient for touch screens.
So, this may be the best version to port to Adam if we can get it going. I unfortunately have no development knowledge to know if it is possible.
Mmmmmh .... i'm using Netbook edition on EEE 901 for my kids but unity isn't mature.
I prefer old version of Netbook edition (10.04 LTS) ... and that's the version used to create Ubuntu Distro for HD2.
Maybe we can ask them for some help.
I'm interested on this too. For the record, I'm keen to get an Adam and wipe Eden, replacing it with Ubuntu. I think Ubuntu 11.04 will be an awesome distro to run on a tablet, and currently Notion Ink's Adam is the only one being made that meets the stats I'd like to see.
The current hacks that exist to get Ubuntu running on the Nexus One (have done that) require running a modified server version from the sdcard, the using VNC to run a virtual session. Has it's plusses (running within Android, for instance), but I'm keen to see Ubuntu running natively. Android isn't mature enough to be a main system yet, whilst Ubuntu is. Cheers.
hope a port is cooming soon
Yeah, I'm very eager to try this too
Maybe a dual boot with Android ?
Looking forward to it
Thanks for your patience everyone. I've been swamped. This weekend I plan to hunt down some files, look at the scripts, and hopefully we can start trying this shortly!
This is one of the main reasons I have been waiting for the Adam for so long. Hopefully we can dual boot Ubuntu as that is what I would prefer, but if not, oh well. I want to have a tablet that acts more like a computer then a glorified smartphone without phone capabilities... Can't wait to see the development of this!
TreTuna said:
This is one of the main reasons I have been waiting for the Adam for so long. Hopefully we can dual boot Ubuntu as that is what I would prefer, but if not, oh well. I want to have a tablet that acts more like a computer then a glorified smartphone without phone capabilities... Can't wait to see the development of this!
Click to expand...
Click to collapse
Dual booting is always preferred yes, but that is not what my method will do. This method will be a bootloader running on top of Android. For many reasons this will be easiest for now.
I'm very excited about this, can't wait to have my Adam and following the developent of ubuntu.
I really think, on another hand, that Android and Ubuntu are majors players in the open-source OS and should therefore communicate better.
I want Adam to be the best friend of my Ubuntu desktop. There are so many possible ways to make these OS interact, at least the way iOS talk to Mac OS X.
i can't wait for my Adam to be here to write apps in this direction!
I love that idea as well. Would be cool if there was a way to integrate Ubuntu netbook edition and Android.
Sent from my PC36100 using XDA App
Ubuntu netbook edition and the desktop version are now the same thing with the upcoming release. Actually, the whole UI of Ubuntu is getting a major overhaul to be touch centric. Currently, my nexus one running cyanogenmod DOES talk to my Ubuntu netbook. And server. Very well in fact. Tomdroid for notes reads all off my desktop tomboy notes, and Funambol, with syncevolution syncs my calendar and address book.
Have just ordered an Adam with a friend, and plan to hack it extensively until Ubuntu is running in full, natively, as it's primary operating system. Android is useful, but doesn't have the functionality of Ubuntu. Would be useful having android as a secondary system, or within Ubuntu, but I won't hold my breathe.
I agree though, the first step seems to be getting Ubuntu running within android. I'm starting to research how the bootloader needs to be hacked to recognise a usb or dvd drive to boot from, and how it would "see" ubuntu installed on one of the internal drives. Will post back with more info soon, even though this is further down the track.
tillum said:
Ubuntu netbook edition and the desktop version are now the same thing with the upcoming release. Actually, the whole UI of Ubuntu is getting a major overhaul to be touch centric. Currently, my nexus one running cyanogenmod DOES talk to my Ubuntu netbook. And server. Very well in fact. Tomdroid for notes reads all off my desktop tomboy notes, and Funambol, with syncevolution syncs my calendar and address book.
Have just ordered an Adam with a friend, and plan to hack it extensively until Ubuntu is running in full, natively, as it's primary operating system. Android is useful, but doesn't have the functionality of Ubuntu. Would be useful having android as a secondary system, or within Ubuntu, but I won't hold my breathe.
I agree though, the first step seems to be getting Ubuntu running within android. I'm starting to research how the bootloader needs to be hacked to recognise a usb or dvd drive to boot from, and how it would "see" ubuntu installed on one of the internal drives. Will post back with more info soon, even though this is further down the track.
Click to expand...
Click to collapse
I ordered my Adam Once I saw it figure in XDA forum. My experience with XDA especially with SGS phone has been immensely satisfying. The way Things are going I am sure Adam will be an object of envy before long.
aMpeX proudly presents:
The Step-By-Step guide for building CM7
for the Optimus 2X
Disclaimer:
I'm taking no responsibility for any damage that might occur to your phone or your PC
This guide illustrates how to setup an UBUNTU 11.04 equipped PC to build CM7 from source
It does not provide any support beyond that operating system, so if you insist on using other
Linux distributions, either adapt the guide yourself or look elsewhere.
Moreover I'm not providing any support for any problems that might occur during the course
of this guide, if they are not introduced by faults within the guide itself. I will only
troubleshoot the activities that this guide is based upon and won't be able to help with your
general linux problems. Feedback however is greatly appreciated.
Reposting this on other forums:
Feel free to post this guide on other forums. I'd like to be given credit though. Thanks
I am new to this myself, but I thought I'd share my findings after successfully building my first kang.
News & changelog:
v0.92 2011/06/01 Fix:
Added "change directory" before init repository (thanks to peewster)
v0.91 2011/05/31 Fix:
Fixed PATH exports (thanks to bhanvadia)
v0.9 2011/05/31 Initial release:
Still much formatting to be done, typos possible. Leave me some feedback if you encounter them.
Alright, so you want to build your own CM7 KANG's ?
Step 0: The starting point + info
When you start this guide, I assume that you just installed your Ubuntu 11.04 copy to your PC and set up all the drivers to your hearts content.
All commands are supplied, as they would be typed in from a USER ACCOUNT, if you operate from the root account, you will
have to add /home/<yourusername> to the most commands. I suggest, after performing the actions required by root, that you log out by typing
Code:
exit
What you need:
A working copy of Cyanogenmod7 installed on your phone
A PC with Ubuntu 11.04 installed (NOTE: If you're about to install Ubuntu from scratch, use the 64Bit version.
I can build CM7 on a 32Bit OS just fine. But AOSP for example won't build beyond Froyo on 32Bit.
At least 20GB of free space (including space required for the operating system itself)
A considerably fast internet connection (syncing the repo takes everal Gbs)
At least 3 hours of time.
All done? Then let's get started:
Step 1: Install the Java JDK
Go to System → Administration → Synaptics Package Manager
Here, we have to enable the partner repositories.
Go to Settings → Repositories → Other Software → Tick Canonical Partners and hit Close
Now push the „Reload“ button, and use the Search button to find the sun-java6-jdk package
tick the box in front of it and choose „Mark for installation“ and accept the following dialogue.
Click the „Apply“ button. Accept the dialogues, you now have the Java JDK installed.
Step 2: Install the Android SDK
Go here and download this.
Extract the archive to a directory of your choice.
Open a Terminal, navigate to the „tools“ subfolder and run the AVD Manager using ./android
In the new Window hit „Available Packages“ tick the „Android Repository“ and select „Install selected“
Once thats done, close everything up, time for step 3.
Step 3: Set up udev
The description from the CyanogenMod wiki struck me as being a slightly bit overkill, and, while it might be necessary for other devices, for LG phones this works just fine:
Create a new file on your desktop named
Code:
99-android.rules
and fill them with the following content:
Code:
SUBSYSTEM=="usb", SYSFS{idVendor}=="1004", MODE="0666"
This will enable the debugging for LG devices, if you have time, it won#t hurt to add the other vendors. Just add another line
like above and replace the „1004“ with the appropriate vendor ID from http://developer.android.com/guide/developing/device.html (scroll to the bottom)
Log in as root using
Code:
sudo su
and paste our file to
Code:
/etc/udev/rules.d
using the terminal (cp)
Set permissions for the file using
Code:
chmod a+r /etc/udev/rules.d/99-android.rules
Now would probably be a good time to check if adb is working correctly.
But first, lets update the PATH so we can type „adb“ anywhere on the file system.
Navigate to your user home directory, press CTRL+H to show hidden files and edit the
Code:
.bashrc
file by adding the following
Code:
export PATH="/home/<yourusername>/<path to the android SDK >/platform-tools/:${PATH}"
export PATH="/home/<yourusername>/bin/:${PATH}"
(The 2nd line is necessary for later)
NOTE:This only enable the use of adb everywhere when logged in with your username. When working as root, you'll have
to add a separate line with /home/<yourusername> in front of the path above.
You have to log out and in again for the changes to take effect.
Now check if you can see your phone with
Code:
adb devices
Alright, still awake? Good, because now it gets interesting
Step 4: Install build packages and create directories
Since we already installed the JDK this command differs a bit from the Cyanogen Wiki:
For 32 and 64 Bit
Code:
sudo apt-get install git-core gnupg flex bison gperf libsdl1.2-dev libesd0-dev libwxgtk2.6-dev squashfs-tools build-essential zip curl libncurses5-dev zlib1g-dev pngcrush schedtool
For 64 Bit only
Code:
sudo apt-get install g++-multilib lib32z1-dev lib32ncurses5-dev lib32readline5-dev gcc-4.4-multilib g++-4.4-multilib
Now we need 2 directories
Code:
mkdir -p ~/bin
mkdir -p ~/android/system
Almost there ….
Step 5: Install the repository
Now we need our repo binary:
Code:
curl https://dl-ssl.google.com/dl/googlesource/git-repo/repo > ~/bin/repo
chmod a+x ~/bin/repo
(credits to p.valenta for notifying me of the adress change)
NOTE: You may need to reboot now
Change to your previously created directory:
Code:
cd ~/android/system/
Initialize the repository:
Code:
repo init -u git://github.com/CyanogenMod/android.git -b gingerbread
Enter your Name, eMail adress and select if you want colors or not.
AND NOW THE FINALE
Code:
repo sync -j16
Get yourself a BIG coffee, because this is going to take MUCH MUCH time, because basically you are now checking out all there is to CyanogenMod.
But wait, we're not done yet. Hang on
Step 6: Getting proprietary files for the Optimus 2X
For this step, you need an O2X with a running Cyanogenmod build, so if you're still on stock, this is the time to flash Cyanogenmod for the first time.
Connect your phone to your PC via USB and
navigate to the device tree in your repo folder:
Code:
cd ~/android/system/device/lge/p990/
and run
Code:
./extract-files.sh
This will extract some libs from your device. But sadly, not all of them (build will still fail) but we will fix this now.
Go to
Code:
https://github.com/koush/proprietary_vendor_lge/tree/gingerbread/p990
and click the download button on the right.
Extract the „p990“ folder located in the subfolder
Code:
/koush-proprietary_vendor_lge-a43238f/
in the archive to
Code:
~/android/system/vendor/lge/
Step 7: Get latest ROMManager
I know I must be annoying the sh** out of you by now, but hang in there
Code:
~/android/system/vendor/cyanogen/get-rommanager
Step 8: BUILD F***ING EVERYTHING
Now this is what you've been waiting for huh?
Sync the repository again:
Code:
cd ~/android/system/
repo sync
Build the ROM
Code:
. build/envsetup.sh && brunch p990
Wait
When everything is finished, your KANG will be stored in
Code:
~/android/system/out/target/product/p990/
And THATS IT!
Congratulations, you have just built your own CM7 KANG, don't forget to share it to other nightly testers
Cheers aMpeX
Useful stuff and tools:
SH script by bhanvadia, tailored to the directories introduced by this tutorial:
Download here
Extract anywhere and make it executable by typing
Code:
chmod +x kang.sh
Create shortcut to the output directory of your KANGs
Type
Code:
ln -s ~/android/system/out/target/product/p990/ <your desired shortcut location>
nice guide, really liked it.
too bad there were none when I started making my kangs.
btw: I use mac it is bit different for mac. but nothing its missing.
Here is file you keep on you desktop to make it work without any typing of commands after you setup your computer working directory as per guide by aMpeX.
and check post #2 for making that file executable.....
kang.sh
bhanvadia said:
nice guide, really liked it.
too bad there were none when I started making my kangs.
btw: I use mac it is bit different for mac. but nothing its missing.
add "~/android/bin/" to path too so you can "repo sync" from anywhere.
just a suggestion... can upload build.sh file on here to make it easy.
something like
1. for clean and build
2. for repo sync
open file and press your options.
thats what I use...
Click to expand...
Click to collapse
That's why the guide states its for ubuntu. I found that even the Cyanogenmod Wiki entries don't work completely for the latest ubuntu (with g++ and gcc 4.3 not being available anymore, also hat huge problems with the java jdk at first)
I'll add the additional PATH variables as you suggested. Thank you.
aMpeX said:
That's why the guide states its for ubuntu. I found that even the Cyanogenmod Wiki entries don't work completely for the latest ubuntu (with g++ and gcc 4.3 not being available anymore, also hat huge problems with the java jdk at first)
I'll add the additional PATH variables as you suggested. Thank you.
Click to expand...
Click to collapse
Here is file you keep on you desktop to make it work without any typing of commands after you setup your computer working directory as per guide by aMpeX.
PS: aMpeX can you just test that file??? just repo sync or rom manager update options.
awesome guide !!! thanks aMpeX !
seems to be working, after you chmod+x the sh file that is. My Repo Sync is stuck at 1%, but I doubt its related to your file.
I'll add it to the 2nd post
aMpeX said:
seems to be working, after you chmod+x the sh file that is. My Repo Sync is stuck at 1%, but I doubt its related to your file.
I'll add it to the 2nd post
Click to expand...
Click to collapse
modified my mac file i use to fit to your setup of directories, just changed directories. ...
yeah then it would work, hope it make it more easy
GET the KANGs flowing...........
aMpeX said:
Useful stuff and tools:
SH script by bhanvadia, tailored to the directories introduced by this tutorial:
Download here
Extract anywhere and make it executable by typing
Code:
chmod +x kang.sh
Create shortcut to the output directory of your KANGs
Type
Code:
ln -s ~/android/system/out/target/product/p990/
Click to expand...
Click to collapse
Download link is sending to wrong post still....
now it should work like this....
http://forum.xda-developers.com/showpost.php?p=14310172&postcount=5
copy
http://forum.xda-developers.com/showpost.php?p=14310172&postcount=5
Can you please also state that it only works on 64bit builds of ubuntu and not 32bit...
Renegade_Rulez said:
Can you please also state that it only works on 64bit builds of ubuntu and not 32bit...
Click to expand...
Click to collapse
Aside from what you can read on the net, my KANGs build perfectly fine on Ubuntu 32Bit
No reason to not install 64Bit though. I'll add a remark in the first post.
Edit: After some asking and digging, read this:
http://twitter.com/#!/CM_arcee/status/75677847712309249
So while standard Gingerbread cannot be built by 32Bit, the CyanogenMod7 repository can.
is this meant to download a lot of stuff for different phones? mine is downloading a lot of stuff at step 5 and it's taking forever..
Imperticus said:
is this meant to download a lot of stuff for different phones? mine is downloading a lot of stuff at step 5 and it's taking forever..
Click to expand...
Click to collapse
It will download files for each and every phones supported by CyanogenMod, thats why its called cyanogen repo, not just P990 repo, but mostly you will use stuff thats required by your phone.
and its suggested to have 15 - 20 GB free, as it takes a lot....
3.5 GB is just "out" folder when it compiles for one device (P990)......
bit of a noob.. done everything..when I try to make the build using build/envsetup.sh i get permission denied
Any help please?
copy/paste the command from the tutorial
there is a leading dot and space before "build
Code:
. build/envsetup,sh && brunch p990
Thank's for the tutorial but i allways get no gsm function build
logcat -b radio
RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING error: com.android.internal.telephony.CommandException: RADIO_NOT_AVAILABLE
Click to expand...
Click to collapse
or
Couldn't find 'rild' socket; retrying after timeout
Click to expand...
Click to collapse
What baseband are you using? Make sure that the lge-ril.so is in your proprietary files
aMpeX said:
What baseband are you using? Make sure that the lge-ril.so is in your proprietary files
Click to expand...
Click to collapse
Thank's for repy.
lge-ril.so is in and generally i flash my build coming from cyano #31 (405) and mcr18 (405)
So...405
Possibly (if you synced the proprietary repository by koush AFTER you ran extract-files.sh) your ROM still includes the lge-ril for 0218.
Try reflashing the ril with the methods provided in this forum.
Other than that, I have no idea what might be causing your problems.
old ril file from koush files do work on 405 baseband too, but you feel better performance with new ril. with old ril you may loose signals sometime.
delete your vendor/lge/p990 folder, and download again from koush's files and put it back there. make sure your directories are in order
example: for lib-ril.so in as below
like ~/android/system/vendor/lge/p990/proprietery/lib/
Ok, this goes out to any and all DEVs out there. We all know by now that we (some people not me) can run linux within android using the loop mounts, vnc viewer, etc... Now how about REPLACING android with a linux distro like debian or maybe even what these guys use http://openpandora.org/ ..... its linux based and has an arm CPU.. Any way I'm talking about flashing over android wiping the internal sorage and installing linux on it or even using the boot loader to flash over android???, of course this is getting rid of any 3g connection and phone usage. I understand that, I am talking about giving our RETIRED droid 1s a use. I wanna see my D1 run a linux distro in full hardware mode NO MORE ANDROID. now dont get me wrong I love android as much as the next guy, but why now flash something else to it???
Another link I found, this is for windows mobile but hey, similar idea.
http://wing-linux.sourceforge.net/trac/wiki/FAQ
P.S. I AM NOT A DEV JUST AN IDIOT WITH AN IDEA!! my ignorance is NOT bliss and I would love to know if this is even possible. I'm willing to help ANY WAY I CAN. lol
THANKS!!!
I don't think it's possible. Because of the locked bootloader we're forced to use Motorola's bug-ridden Kernel and as Android's Kernel is a heavily modified Linux Kernel it most likely won't run an ordinary Linux distro.
But I'm no expert either
Milestone is locked, Droid is not ...
Maybe this will help (if you don't know german, you can use Google Translate):
http://www.android-hilfe.de/anleitu...debian-chroot-mit-lxde-auf-dem-milestone.html
Thanks for the replies. Again the USA Droid 1 is nit locked or at least has been completely unlokcked. I've read a million "run debian on android" posts... I don't need to know German to see that the post above is the same thing. Like I said before I have NO INTEREST IN RUNNING LINUX ON ANDROID. I want TO REPLACE android completely with Linux to make a device like the openpandora handheld from my first link.
Any one up to the challenge????
Thanks again!
Really, no one??
I've been running Debian on my Droid booting from the SD card for a while, more recently trying Arch Linux after realizing that anything optimized for ARMv7, VFPv3, NEON, or Thumb-2 (I'm not sure which unfortunately) won't boot because of a page fault or something. Ubuntu, MeeGo, and Angstrom just kernel panic and don't give any useful information even at the highest debugging level. I'm back to using an ARMv5te Arch Linux build (http://archlinuxarm.org) although I could just as well use Debian. I really wish Ubuntu worked for multitouch.
Well, I got the touchscreen calibrated! I forgot that my screen rotation hack only rotated the framebuffer It's stuck in portrait for now. I decided to use mtev (MeeGo's multitouch X11 input driver) after being fed up with evdev's aversion to being rotated, but now that I'm back to the stock portrait rotation evdev should work fine.
If you want instructions, either PM me or wait until I post a full guide and/or my patched kernel tree. It's not super difficult, but it's a lot of command line use and compiling.
What works:
*CPU and SD card (obviously )
*Touchscreen (single touch/portrait only for now)
What needs work:
*Keyboard mapping is wrong, the number keys and symbols don't work. I need to figure out how Android handles Alt. I had to patch the GPIO keyboard driver because the keyboard worked in the console but not in X11, which expects EV_SYN.
*Sound is OSS only, but there is no mixer device, so aumix is useless and there's no volume control or sound output.
*I haven't tried the SGX driver, so I can't comment on hardware acceleration yet.
*Battery charging relies on battd, which is a proprietary Android binary from Motorola. It might run on Debian with "ls -s / /system" and the creation of the socket it expects (init.sholes.rc I believe), but I'm not getting my hopes up.
Untested:
*WiFi (needs firmware, but should work)
*Bluetooth
*Calls/data
*Sensors (although the accelerometer and compass seem to be recognized by evdev)
I'll upload my kernel, either as patches or on GitHub (or binaries if there's enough demand) once I get around to fixing the keyboard issue. Fingers crossed that I don't get carried away cleaning up the kernel, or worse yet, give up...
This is incredible news! I'm so glad to hear it. Of course you are running in hardware mode? Not through android? If so I'm super exited about this! I love arch Linux, I run it on all my computers and I understand it more than any other distro I've tried. I would love to give it a shot, though I'm not that great at compiling I think it will be worth it.
As I said before I am in no way a dev or even a Linux pro, but I can get by and if theres any way I can help this project become "complete" I'm willing to learn what ever is necessary to do so.
Also were u able to get an x server running? Possibly a DE? That would be crazy awesome.
Thanks a million, looking foreword to work with you and make this happen!
For anyone who's interested, I put together a quick package containing my kernel patches, configuration notes, and an automated kernel build script.
It's pretty self-explanatory aside from the installation of the root filesystem, which I leave up to your imagination
As I've probably repeated several times now, I've run Debian and Arch Linux natively on my Droid with my patched kernel (no chroot or VNC "hack"). With enough determination, it's possible to run practically anything on it - personally, I'm determined to get Ubuntu on it.
WOOT... insta-fail for me LOL you have it set up to work in specific directories? I thought i placed everything right but I guess not.. I got an error on the first line of output lol
Welcome to gTan64\'s lazy Droid kernel compiler\!
build.sh: line 5: [: missing `]'
build.sh: line 5: -z: command not found
build.sh: line 5: -z: command not found
Entering $WORK
Applying patches
build.sh: line 16: /*.patch: No such file or directory
mv: cannot stat `/arch/arm/boot/compressed': No such file or directory
cp: cannot stat `/compressed': No such file or directory
Setting up build
cp: cannot stat `/GNUmakefile': No such file or directory
cp: cannot stat `/sholes_config': No such file or directory
FIXME! No numeral or symbol input until someone finds a third-level
modifier key to use instead of AltGr for the keyboard.
cp $MISC/defkeymap.map $K_SRC/drivers/char
Building kernel!
make: *** No targets specified and no makefile found. Stop.
Kernel build done!
You have done something amazing, I'm just to stupid to figure it out my self. XD
I can understand why you would want ubuntu with all its pre-setup glory and support for nearly all hardware but dont you think its a little heavy for this hardware? lol I doubt you would try to use the Unity UI but I doubt that alone would even fit in ram LOL you could just use the ubuntu packages and drivers with debian maybe?
THANKS AGAIN!!!!
That's what happens when I don't test my own scripts
I was thinking too much about making it easy. Just try applying my patches to your tree manually.
Code:
cd kernel_src
patch -p1 <../patches/first.diff
patch -p1 <../patches/next.diff #and so on...
#Obviously, substitute the paths of the actual patches ;)
#Finally, copy sholes_config to .config and invoke 'make'.
It's actually much simpler than my script makes it, and you don't need my convoluted folder setup.
UM lol I cant find any patch files? are they in the ZIP? or do I have to obtain them elsewhere?
I can tell this is gonna be a hell of a project LOL
THANKS!!!
"Duh" moment - I used the .diff file extension instead of .patch
I'm such a scatterbrain... Remind me not to release anything before testing
EDIT: Strike that, reverse it. They're .patch files.
I AM BLIND lol I found them... BUT.. when I try to patch. terminal just seems to lock up... I press enter, the curser moves to the next line but it doesnt do anything. lol how long should 1 patch take?? its been about 10 minutes and I leave it be for now
EDIT:
LOL i forgot the "<" in the command OOPS but I'm not seeing any .config file or folder in the source to copy the sholes_config too. yes I have show hidden files on.. PS unfortatly usinf Fedora 15 gnome 2...... (on server so I can work on this anywhere through vnc )
THANKS
When I said "copy sholes_config to .config", that's literally what I meant. .config is the Linux kernel build configuration file, not a folder.
'cp /path/to/sholes_config .config' from your kernel tree should do it.
Oh, I forgot to mention that you need an ARM cross-compiler/toolchain. I use the gcc-arm-linux-gnueabi package in Ubuntu, but I don't know what the Arch equivalent is off the top of my head.
The "GNUmakefile" is just a convenience, it exports "ARCH=arm CROSS_COMPILE=arm-linux-gnueabi-" before calling the actual makefile. If you don't have an ARM cross compiler in your path, it won't build at all. If you do, modify CROSS_COMPILE to point to it - on some systems it's called arm-unknown-linux-gnueabi, etc. etc.
Let me know if you get anywhere before it errors out.
OK I put the config file in the kernel_src but unfortainatly I'm using Fedora 15 XP I installed arm-gp2x-linux-gcc which is the fedora arm gcc I guess... lol so wha would I edit in the .config to make it point to arm-gp2x-linux-gcc. Its not my first attempt to compile an android kernel but I've never been succesfull LOLOL
thanks
I'm pretty sure that toolchain won't work - the GP2X was ARMv5 IIRC, so unless it's a newer build of GCC (4.3 or higher) and you're absolutely sure it supports the ARM EABI and the ability to generate ARMv7 instructions (which is unlikely if it's pre-4.1), I would recommend a newer toolchain.
CodeSourcery makes a pretty solid one: https://sourcery.mentor.com/sgpp/lite/arm/portal/release1803
If you end up using it, you can change the second line in GNUmakefile to "CROSS_COMPILE=arm-none-linux-gnueabi-". Don't worry about changing .config.
Well I DLed the linux/GNU installer and it gave me "arm-2011.03-41-arm-none-linux-gnueabi.bin" LOL
so I was thinking would it just be easier to just use my lappy with crunchbang (debian based) so I can follow ur instructions with deb / apt-get LOL fedora is a ***** and it dont have what I need... I cant find an arm v7 cross compiler for it
thanks
.bin files are the Linux equivalent of Windows EXE installers. Run it like this:
Code:
#cd /path/to/installer.bin
./installer.bin
#substitute the actual name, of course.
It needs root permissions if you want to install it to /usr/local (sudo ./installer.bin or su -c 'sh installer.bin'). You can also install it to /usr, but that will make it more tedious to uninstall later. If you decide to install it in your home folder - say ~/toolchain - you don't need root permissions, but you will need to add ~/toolchain/bin to your path:
Code:
export PATH=$PATH:$HOME/toolchain/bin
To be honest, I prefer Ubuntu to Fedora/OpenSUSE/$RPM_distro, so if you have access to a Debian or Ubuntu system, using that would make my life easier
Omg duh... the "non_Linux" part of the name true me off lol i'll start doing this on my laptop it's deb based crunchbang. I prefer anything over rpm distros too but it was a quick painless install on my server XP thanks ill try this when I get home
Sent from my DROIDX using XDA App
Hi
I am working on the Kovsky kernel at the moment, but would really like to be able to make changes to the Andoid part of the system as well. Does anyone have build instructions for the XDAndroid system?
I have done cross compiling to various platforms before, so the part I need is:
*What sources to download
*What commands to run
As I didn't get any feedback I have decided to figure it out for myself and publish as I go along:
To get the sources follow the instructions at:
xdandroid.com/wiki/Getting_the_Source
mkdir ~/xdandroid
cd ~/xdandroid
repo init -u git://gitorious.org/xdandroid/manifest.git -b gingerbread
repo sync
Now I have lots of code, and the next step is found at:
xdandroid.com/wiki/Build_Configuration
What I need is a "buildspec.mk" file. If anyone has one that has been used for NAND compiles feel free to share
I have now realized that all the ROMS have been compiled based on CyanogenMod7 source that have separate repositories from xdandroid.
Sp3dev created a repo for some of the kovsky files he used in november last year at: https://github.com/astarasikov/device_kovsky
Next up is integrating them into the cyanogen tree and creating vendor files based on leo/dream
I am starting to piece everything together now. I am still not able to compile it, but I am getting closer:
Here are some steps that have only been tested on an Ubuntu system:
1. Follow the steps here http://wiki.cyanogenmod.com/wiki/HTC_Dream_&_Magic:_Compile_CyanogenMod_(Linux) down to "Install the Repository"
Code:
# 2. Install repository by running (This will take several hours):
cd ~/android/system/
repo init -u git://github.com/CoolRunnerII/android.git -b gb-release-7.2
repo sync
# 3. get the propriatary files from a running phone connected by usb by running. You may need root to do this:
cd ~/android/system/device/htc/kovsky/
./extract-files.sh
# 4. copy vendor file to correct place by running:
cp device/htc/kovsky/cyanogen_kovsky.mk vendor/cyanogen/products
# 5. Get Rom-manager by running
~/android/system/vendor/cyanogen/get-rommanager
# 6. sync repo again by running:
cd ~/android/system/
repo sync
# 7. get ready for compile with:
. build/envsetup.sh
lunch cyanogen_kovsky-eng
# 8. Start compile with:
make
Great news.Hope you can finish it!
Compile now runs to the end
On my system the compile runs to the end when doing the steps above. I have not started packageing it yet, but everything seems to compile correctly.
The other guides recoment running "make bacon" witch are supposed to create a "over the air" OTA package. This crashes when I try it. If anyone has some good information as to how the final packages is supposed to be please share. all the other CM7 roms have folder in the zip fil called META-INF that contain the update script. The .zip-file created by running make does not.
I just added Alex's fork of the gps library from xdandroid to the manifest.
If someone could try the steps above and report to me wether it works on their system or not I would be very thankfull. My goal is to create a streamlined rom build directly from source. That way getting the last issues out of the way should be possible even without guys like Alex working on it.
CoolrunnerII said:
I just added Alex's fork of the gps library from xdandroid to the manifest.
If someone could try the steps above and report to me wether it works on their system or not I would be very thankfull. My goal is to create a streamlined rom build directly from source. That way getting the last issues out of the way should be possible even without guys like Alex working on it.
Click to expand...
Click to collapse
very very nice job!!!!!! currently downloading kovsky repos to check if i can build but it will take hours with slow connection and i've little time cause of exams...
btw: if someone has problems with syncing cause of slow internet repo sync -f is a nice option
EDIT:
in time i'm going to improve cwm recovery (currently porting cwm-touch to another device...)
EDIT2: any chance to add wpa repo to existing working directory?
btw: you could also use a local_manifest.xml for the additional repos... (just if you don't already know ) (would be more official???)
i can't test cause i don't know how to add wpa repo
this should be in android development section... you posted here cause of limited posts right? btw thanks a lot for missed call fix
Yes I posted here due to limited rigths.
I'll start a new thread in the developer section now that I can
Cool runner the rhodium android development forum has a 7.2 build but I don't know how to make work for our device. I pm the maker he said I can use his rom