Hi!For recently i replace my touchscreen and now my phone don't want to turn on.I made a mistake inside him or is a touchscreen problem?:crying:
ShagunG said:
Hi!For recently i replace my touchscreen and now my phone don't want to turn on.I made a mistake inside him or is a touchscreen problem?:crying:
Click to expand...
Click to collapse
If you're on warranty take it to Sony, if not.. take it to an experienced technician maybe something broke when you replace it.
Something went wrong when you opened it. If there was a problem with the screen it would work but it wouldn't desplay anything. For example the vibration, charging, led lights should work.
Warranty will not cover you so send it to a technician as said above
he vibrate when i press the button.Maybe i not connect display correctly.
ShagunG said:
he vibrate when i press the button.Maybe i not connect display correctly.
Click to expand...
Click to collapse
Maybe, try to reopen it and see if there is any obvious reason for not displaying...
Where did you buy the screen from? Are you sure it is ok?
Related
I recently gave my phone to someone to replace the digitizer as there was a crack. Now the LED is stuck on the blue light. Whenever I turn on the phone it remains there. Is this a problem with the LCD screen or is it a problem with my firmware is what the person told me was the problem?
Aurion said:
I recently gave my phone to someone to replace the digitizer as there was a crack. Now the LED is stuck on the blue light. Whenever I turn on the phone it remains there. Is this a problem with the LCD screen or is it a problem with my firmware is what the person told me was the problem?
Click to expand...
Click to collapse
It's not the firmware. something went wrong while replacing that digitizer. Firmware shouldn't be getting any problems from a replaced part that doesn't concern memory
Also, it's probably a problem with the trackball, holding the trackball while booting makes the led turn blue
JAguirre1231 said:
Also, it's probably a problem with the trackball, holding the trackball while booting makes the led turn blue
Click to expand...
Click to collapse
I heard that when that happens the phone does not turn on at all, but is working fine.
Hello,
My Touch screen doesn't respond to touching since an hour ago.
I see no logical reason for this fault,
My screen is guarded and nothing happend to it.
I tried to remove battery and insert it with no luck, I booted my phone into CWM touch recovery, and it also doesn't recognize touching.
update2:
The problem appeared again.
just flash a kdz to return to stock rom
naeem86 said:
just flash a kdz to return to stock rom
Click to expand...
Click to collapse
The problem appeared again I tried a lot of times to remove battery&insert but it doesn't help.
Please help me.
I've just flashed my phone to stock rom,
I'm still having the same touchscreen issues - the screen won't respond to touching.
Any suggestion please?
Is it possible that the touchscreen issue is caused because of the screen protector?
ohadz said:
I've just flashed my phone to stock rom,
I'm still having the same touchscreen issues - the screen won't respond to touching.
Any suggestion please?
Is it possible that the touchscreen issue is caused because of the screen protector?
Click to expand...
Click to collapse
Screen protector protects screen If you have got stock FW back on the phone, just bring it to your carrier and they should do it on warranty.
N00BY0815 said:
Screen protector protects screen If you have got stock FW back on the phone, just bring it to your carrier and they should do it on warranty.
Click to expand...
Click to collapse
Thanks for the advice,
I flashed stock rom and now when I turn on my phone It shows me the "Android Welcome Screen", Is there a method how to bypass this screen without touching the screen? (If I'm taking phone to my carrier, it might seem strange to them that my phone shows the "Welcome screen" whether the touchscreen doesn't work so they could know I flash my phone and not to accept my phone's warranty)
ohadz said:
Thanks for the advice,
I flashed stock rom and now when I turn on my phone It shows me the "Android Welcome Screen", Is there a method how to bypass this screen without touching the screen? (If I'm taking phone to my carrier, it might seem strange to them that my phone shows the "Welcome screen" whether the touchscreen doesn't work so they could know I flash my phone and not to accept my phone's warranty)
Click to expand...
Click to collapse
You can try on-screen phone, which is a software by LG, but i think, that this also needs to be setup first... Otherwise, just tell them, that you did a factory reset, because your phone wasnt working properly anymore, and thats when your error occured.
I dont see another way... Maybe repair it on your own
N00BY0815 said:
You can try on-screen phone, which is a software by LG, but i think, that this also needs to be setup first... Otherwise, just tell them, that you did a factory reset, because your phone wasnt working properly anymore, and thats when your error occured.
I dont see another way... Maybe repair it on your own
Click to expand...
Click to collapse
I'm going to take my phone back to carrier
But there's very strange thing: the touchscreen rarely works.
I removed the battery for a night and when I got up in the morning and I inserted the battery and turned the device on, for a few seconds the touch worked . What does it tell about phone?
I've just received my phone from repairing, and my touch screen has been replaced.
I'm a little disappointed because I expected for getting new phone(I have a warranty). I've also noticed that the screen is a little thicker, about few mm, which is weird.
Is it right that phone with replacement touch screen won't be as smooth and good as normal one, or not necessarily?
Same problem of Freezing screen
Disappointing but i too have this very same problem with my brother's P970... any ideas how or why?
though sometimes it would respond but leaving it a few minutes would again make it freeze. The hardware buttons work but the 4 touch buttons wont. now i cannot get thru the rom manager to make it into Bootloader mode so i can install another rom...
some things i did a few days before this happened:
1. flashed CWM recovery successfully.
2. installed a lot of apps and happened to fill up the SD card.
3. installed a new ROM Gingerbread Repackaged V20N
I can still get to S/W Upgrade but all I need is the Bootloader Mode. I honestly dont think this would be a digitizer malfunction since it works well in a given time. It's like it lagggggs much and unresponsive. I cannot get past the lock screen. Any ideas or any other way to get to the B/L mode? Thanks.
arzakem said:
Disappointing but i too have this very same problem with my brother's P970... any ideas how or why?
though sometimes it would respond but leaving it a few minutes would again make it freeze. The hardware buttons work but the 4 touch buttons wont. now i cannot get thru the rom manager to make it into Bootloader mode so i can install another rom...
ARZAKEM i have the very same problem too i was also doing the same stuff which you atempted and end up with none responsive touchscreen.
my phone is since then lives in a my draft in the kitchen and i was also curious about the malfunctionality because it worked sometimes and other times not.
I just thumbled upon the post when i search the web i know its too late to ask but could you please please tell me what you done with that phone ???
I ordered a new touchscreen from ebay and it will arrive soon but i was wondering wether you managed to fix it or not? could you please tell me what was the real problem did you replace the touchscreen or is it not the touchscreen?
Click to expand...
Click to collapse
I have this problem occasionally as well, but only occasionally and only with cm10
Sent from my LG-P970 using xda app-developers app
my phone has somehow the same issue, the touch screen works normally,but out of nowhere it stops responding,i mean the hole screen and also the 4 touch buttons on the bottom just wont work like they supposed to,but here is the catch,i lock the phone with power button and the screen and the buttons start to work normally for a while......but then the problem happens again!!! could someone tell me what the heck is wrong?? is it the software or the physical touch sensor thing is broken?? HELP!!
albertwesquer said:
my phone has somehow the same issue, the touch screen works normally,but out of nowhere it stops responding,i mean the hole screen and also the 4 touch buttons on the bottom just wont work like they supposed to,but here is the catch,i lock the phone with power button and the screen and the buttons start to work normally for a while......but then the problem happens again!!! could someone tell me what the heck is wrong?? is it the software or the physical touch sensor thing is broken?? HELP!!
Click to expand...
Click to collapse
You need to indicate your current ROM. Then can the issue be accessed
Sent from my LG-P970 using Tapatalk 2
My Xperia fell today and when I picked up I saw the screen was broken (im talking about the inner part which is the LCD I believe)
Its kinda like this [Seach on youtube "My LCD Xperia X8 Cracked" since I can't post links ] (That is not my device but the problem seems to be the same, even tho on mine its only a small part (just the top edges))
Everytime I turn on the phone now it just shows the lanes then turns itself off.
Is there any way to fix it? If so, would I have to buy a nex LCD? And if so, would it be hard to change it myself? I live on a small town and trusting your device to some technician is like giving away your money.
Thank you ^^
Ununhexium116 said:
My Xperia fell today and when I picked up I saw the screen was broken (im talking about the inner part which is the LCD I believe)
Its kinda like this [Seach on youtube "My LCD Xperia X8 Cracked" since I can't post links ] (That is not my device but the problem seems to be the same, even tho on mine its only a small part (just the top edges))
Everytime I turn on the phone now it just shows the lanes then turns itself off.
Is there any way to fix it? If so, would I have to buy a nex LCD? And if so, would it be hard to change it myself? I live on a small town and trusting your device to some technician is like giving away your money.
Thank you ^^
Click to expand...
Click to collapse
use warranty....or
this is cheap screen http://www.tvc-mall.com/details/LCD...r-Sony-Ericsson-Xperia-X8-Shakira-SONl-X8-01/ (try to find more safer web pages than this)
its not hard to replace lcd...if you need help about replacing contact me via pm :good:
fotak-x said:
use warranty....or
this is cheap screen (try to find more safer web pages than this)
its not hard to replace lcd...if you need help about replacing contact me via pm :good:
Click to expand...
Click to collapse
Thank you for the fast reply. Yeah I think I'll try checking my warranty even tho I believe is off warranty already as I have this device for over a year now.. I'll prolly end up changing the LCD however, is it sure that changing the LCD will fix the problem or it might have another broken thing inside there? Today I just tried to turn it on and it won't even turn on now it just pops the red LED when I press the button (I think it ran out of battery, but then I try to charge it and it won't).
Thank you again
Ununhexium116 said:
Thank you for the fast reply. Yeah I think I'll try checking my warranty even tho I believe is off warranty already as I have this device for over a year now.. I'll prolly end up changing the LCD however, is it sure that changing the LCD will fix the problem or it might have another broken thing inside there? Today I just tried to turn it on and it won't even turn on now it just pops the red LED when I press the button (I think it ran out of battery, but then I try to charge it and it won't).
Thank you again
Click to expand...
Click to collapse
I have the same issue every time the phone dies from lack of battery. after poking it a bit on USB (connect it for 20-30 times) I saw that the device sometimes switches on in Flash Mode and after a while, FlashTool wil recognize it and do s strange thing. It allows you to start flashing what you want but after starting to gather device info, it freezes. after doing this a few times (10-15 times) Windows recognizez new device and the FlashTool asks to choose my device. Then the phone reboots and starts up in Android.
Usually this works and phone starts to charge but today after it started it was not charging and the batt level was saying Batt 0% and that it won't last if unplugged. I've left it like taht for an hour but still nothing. Then I decided to reboot the phone from the power button menu and after restart it started charging. It took a while but then it returned to normal and now it works again.
I have this issue only on custom kelners both NAA and ALFS but it's ok on stock kelner...
It would be great to find a fix for this as it is very annoying and time taking just to make the phone start charging...
Actually I charge mine via USB connected to my PC everyday (as its more comfortable) but I tried to charge it with the regular charger plugged in to the wall's socket and it charged.
I guess I'll buy a new LCD and try to change it myself.
My Xperia Z turn on and also vibrate but doesn't show any thing in the screen what should i do now......please help?
I can hear that the touch is working (clicking noises and vibration) but I can’t see anything on the screen. How can I fix?
What did you do for the phone to be in this situation? Add as many info as you can.
Thanks original, I have not modified any. Just hold open facebook
What???
I do not get to the phone so. It also works everything just a dark screen did not see anything
pula97 said:
I do not get to the phone so. It also works everything just a dark screen did not see anything
Click to expand...
Click to collapse
From what you are saying it looks like a hardware problem. There is nothing from the software you can do to fix it...
I'm very sorry but you need to take the phone to a repair center.
Thank you
pula97 said:
My Xperia Z turn on and also vibrate but doesn't show any thing in the screen what should i do now......please help?
I can hear that the touch is working (clicking noises and vibration) but I can’t see anything on the screen. How can I fix?
Click to expand...
Click to collapse
Change the charger if it cant work, replace battery, if both failures then try replace pin.
burdisajjad said:
Change the charger if it cant work, replace battery, if both failures then try replace pin.
Click to expand...
Click to collapse
I do not understand
phone seems to be working, it turns on, vibrates and the touch is working
but., somehow the screen is black!! not turning on at all.. tried everything (combinations of buttons, disassembled the phone and reassembled it)..
any suggestions guys?
zaher.bahouth said:
phone seems to be working, it turns on, vibrates and the touch is working
but., somehow the screen is black!! not turning on at all.. tried everything (combinations of buttons, disassembled the phone and reassembled it)..
any suggestions guys?
Click to expand...
Click to collapse
Shot in the dark here. If you're getting vibrations and response to touch, my best guess would be that the screen itself is damaged. May have to get a new panel for the device. I wouldn't THINK it would be software related, but for the sake of ruling things out, what software is the device running? Custom ROM? Stock build?
EDIT: It could be a simple thing like a loose or disconnected ribbon cable inside.
stock,
it actually happened after a reset (and shipping by USPS)
zaher.bahouth said:
stock,
it actually happened after a reset (and shipping by USPS)
Click to expand...
Click to collapse
This is the phone where you hit factory reset, threw it in a box and shipped it while it was resetting?
Probably the screen was damaged in shipping.