[Q] Samsung Galaxy S1 Help - Galaxy S I9000 Q&A, Help & Troubleshooting

Hello i have a Samsung Galaxy S1 (SGH-T959V), i had the cm-9-20120830 installed.
Yesterday after i tried to turn on the bluetooth the phone shut down and stopped at the Cyanogen Mod logo after rebooting.
I tried to run the recovery just to clear the cache and restore to factory settings but it didn't solved anything, after some time of reading through the forums i came up to a post that said that it could be firmware problem, so i tried to update via the Odin tool
(Odin v1.82_and_512.pit_513.pit_803.pit_files) but it failed and the phone just froze on the download mode page with a bar that said "Downloading" and from there it just turned off itself and now it won't turn on at all, it won't power up, if i try to put to charge no icon is displayed or anything.
Might there be a Fix for this?
Thank you for your time and help.

have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1 if nothing there helps you may need to read here http://forum.xda-developers.com/showthread.php?t=1330491&highlight=usb+jig

Related

[Q] [HELP] Error during upgrade

Hi all!
I have a rather major problem.
Today Kies told me that I have a new upgrade for the firmware of my Samsung Galay S i9000. It ran stuck rom with only a few apps installed. I said i want to upgrade so it started to check everything, done a backup of my contacts, started to download the firmware on my PC. So far everything is good.
After that the phone rebooted into an android working logo and said "Downloading..." it stayed like this for a while and after that Kies gave an error. Now the phone is stuck on this screen. Disconecting the device from the usb cable and pluging it back in does't do anything. Kies tries to connect to it but after a couple of minues gives an error that the device is not responding and I should try to rebot the device.
Any idea what to do? This is the work phone so I have to fix this.
Any help is appreciated.
EDIT: Fixed the problem with odin. I know I should get a warning for not searching first...but I panicked.

S3 Mini stuck on boot

hi, I state that I have already searched on the forum before writing but I have not Seen nothing to help me. I have a mini s3 (I8190N) that after a change ROM got stuck at the samsung written soon after the turn on and keeps rebooting endlessly.
Does not go into recovery mode but it goes into download with odin I could not solve anything because it remains locked to the message RESET (ie, the phone will restart odin and remains locked). I also tried to tick the auto reboot but nothing. You know you help me?? :fingers-crossed:
ps: sorry for my english
EDIT: I solved but I do not know how I did it

[Q] failed flashing CM11 -> result boot loop

Hi,
I tried to flash CM11 in my Phone with Odin but it gave a fail as result. So I tried it again with an other firmware but it wasn't possible.
Everytime I connect my Phone to my computer or to the charger is goes into a bootloop. It gives me a screen that says "firmware upgrade encountered an issue" for 2 seconds and it shutsdown, it restarts and give's me the screen with error back.
I think the problem is the CM11 I tried to flash is for an I8190 and I have an I8200 (I found that out to late
I have search google and this forum for 2 days but I didn't find a working solution.
I tried to get into recovery of dowload mode but that's impossible due to the boot loop.
Kies can't connect to my Phone. I checked my powerbutton and it's not stuck.
I removed the battery a couple of times for more than 2 hours, ...
Does someone know what I can do so get my Phone working again?

Galaxy S6 is stuck on logo screen and FRP lock is on

Hi,
Some how I turned the FRP lock on and when I restarted my phone on the logo screen it said FRP lock is on and then nothing happened after that.
I googled around and people suggested to update the firmware using Smart Switch. Smart Switch completed its work 100%, but the my phone got stuck on logo screen and nothing happens. After more googling I found this solution: http://forum.xda-developers.com/galaxy-s6/help/sm-g920f-stuck-samsung-logo-5-1-1-update-t3150727
When I try flashing the phone using Odin with the instructions above, it says "Custom Binary(BOOT) Blocked By FRP Lock".
People please help me to resolve my issues:
1. FRP lock is on. How can I disable it?
2. Phone is stuck on logo screen.
Thank you!
Try the smart switch thing again and let it keep loading. can take up to 10 minutes the first time it loading.
tyrone1 said:
Try the smart switch thing again and let it keep loading. can take up to 10 minutes the first time it loading.
Click to expand...
Click to collapse
Before I tried with Odin I had tried multiple times. Still the same issue.
Odin latest firmware and let it boot over 10 min.
Hey! I had the same problem recently but I was be able to recover my phone by, downloading kies 3 (not smart switch) So once that's down open it up and click the "tools tab' and you want to do a "firmware upgrade & installation" now enter your device info, you can get your SN and IMEI numbers by pressing and holding "volume down + home + power" then hit the home button. So use that information and put in kies. Then it will prompt you to boot to recovery but instead boot to download mode and start the process in kies so then just be patient, really patient and might take up to an hour. and good luck! Hope it helps!
I'm in the same situation. I've installed stock firmware with both odin/kies everything was successful, but on boot, it's just stuck on logo. FRP lock is on, but I know the user and pass.. it's a friends phone. How can I enter the account if the device doesn't even boot up... !? I've tried everything I could find on the internet.. nothing worked.. any new ideas? anyone..? thanks.
If a full restore was successful via kies then it should boot up as if it were brand new outta the box.

Samsung Galaxy Tab GT-P1000 not booting only turning on camera Flash

I tried to do stock rom (P1000XWJQB8_P1000DBTJQ1_DBT) with pit (gt-p1000_mr.pit) with ODIN. During the flashing process it stuck somewhere on (hidden) and after some time it shows fail. But device is stuck on downloading screen and shows half process bar and I wait for hour and so but device is still stuck on the same. So, I decided to turn off and start the device again and I did. But after turning off when i tried to start device again it wont start I mean there is no screen booting happening just back camera flash every time i tried to power on the device or tried to charge it or connect it to USB. Even ODIN or Hemidell is not detecting it anymore.
Please help me.......

Categories

Resources