Related
Currently, I have a Body Glove on my Inc, and I'm really looking to find a more slim fit case. Mainly I need something that will protect the camera, but keep the slimness of the phone there.
I was thinking of the Incipio Feather, or the Case Mate Barely There...but I can't find any reviews on them.
Thanks guys
I have the Incipio Feather and let me tell you it is definitely the slimmest I've ever seen. It gives VERY little protection except for maybe preventing the back and two sides from scratches. You absolutely cannot lay the phone face down since it doesn't extend up past the glass. I actually bought one just to make a car mount with it. I glued a Garmin windshield mount onto to back of it and it works really really well for this, since the phone can be inserted / removed from the Feather quite easily, yet it is secure. When I get into the car I just snap it in and go!
If it's minimal you want go for the Feather. I currently use the Seidio Innocase II Surface when I'm outside the car, and the quality / protection is great while still being not bulky. I've tried about 5 or 6 and settled on the Innocase.
Cheers
+1 for the Seidio Innocase II. I've had mine for about a week now and I really like it. It's only 1.1 mm thick. Might be just what you're looking for.
Hmm, I had Seidio for my Storm, but that was a few years ago. The case ended up breaking on me. It was the Innocase 360. How is the build quality of the Innocase 2?
I have the Innocase II and it scratched up the border of my phone. Pretty dumb case, if you ask me.
Seidio HTC Droid Incredible ADR6300 Innocase II Surface...has been an awesome case for me as well...good luck
I'm using the Innocase II also. It's been a great case so far. Not perfect, but it's slim and seems to protect my phone pretty well. I'd love an Otterbox that was this thin somehow.
my speck case from verizon came in, slim and protects the camera, and is raised about .1 mm so you can lay the screen down..no bulk.
http://www.amazon.com/Protector-Protects-Scratches-Incredible-Installation/dp/B004GZSXQI/
Wow...I never knew those existed!
I have the Case-Mate "Barely There" case and I love it. I spent like 2 months being indecisive because I wanted something that wouldn't make my phone bulky while still providing protection without shattering like some thin cases (I've dropped it 2 or three times now and its protected my phone every time). I also wanted a decent amount of grip on the case but not to the point where it grabs the inside of my pocket like some gel cases. It also sits almost perfectly flush with the camera lens in the back, providing some protection from the glass being the first thing to hit a surface every time you put the phone down.
The Incipio Feather case looks almost identical to the barely there case but people seem less confident in it's ability to actually protect the phone if it is dropped..
I've also heard a lot of people complain about the Innocase's scratching their phone, which seems counter productive...
Just my two cents considering you seem to want the same features I wanted in a case.
I use the Innocase, and I dropped my phone on the street, and it landed on the very corner of the phone. Figured it was a goner but it actually did a great job. Love the thin case.
Wow! Case-Mate looks amazing!! I might buy it
I've got the Seidio Active and i love it. Dropped the phone tons and not a scratch. Protects the camera lens well too.
http://www.seidioonline.com/ProductDetails.asp?ProductCode=CSR6HDDN-BK
Big +1 for the Innocase Surface. Very solid, great soft touch exterior and nice padding inside. Not the absolute thinnest but adds very little bulk and has a very low profile bezel around the screen, unlike some cases which make it hard to hit buttons near the edge of the screen.
I previously had the Rocketfish case that Best Buy pushes on everyone. Got it thrown in for free with the phone after bullying the rep into throwing in some freebies. Glad I didn't pay for it! The soft touch coating started to peel off after about ten days, one edge kept coming open and when I did drop the phone just once, the case completely popped off. Complete $hit if you ask me.
boomboxgneration said:
The Incipio Feather case looks almost identical to the barely there case but people seem less confident in it's ability to actually protect the phone if it is dropped..
.
Click to expand...
Click to collapse
Been in the feather about a month now. Several drops, although nothing too extreme, and so far so good. Love the barely there feel!
I was lucky enough to get a seidio case for 10 bucks and out of 5 cases its the best one yet
Innocase is def awesome. I love it.
r3dlined said:
http://www.amazon.com/Protector-Protects-Scratches-Incredible-Installation/dp/B004GZSXQI/
Click to expand...
Click to collapse
Just got mine in the mail. I will upload pics as soon as I get my new battery door in the mail (tomorrow?)
Innocase surface here too....I agree it is the best combination of low profile/good protection I have seen. It doesn't interfere with wiping near the screen edge at all, but keeps the screen from touching a surface if u lay it down face down. Kinda feels like the actual incredible to the touch as well. I did a ton of research and am very happy. Thanks to everyone in this forum - ur input was super helpful in researching a case.
Sent from my ADR6300 using XDA App
Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!
i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?
I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app
well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!
one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!
This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium
No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case
The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.
Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium
They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.
LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.
Its an accessories related question and i hope its ok to ask here. I just received my Nexus 7 32GB and loving it! As what i would do usually, I immediately started looking for back cases / covers / pouches for this lovely device and then I tought, does it really need one? The material at the back doesnt look like the one that could easily be scratched. But then I see so many cases around and people using them. Maybe to better protect the device when/if it falls? I dont like folio cases anyway and only buying a back case looks like a waste.
Any suggestions?
Sent from my GT-N7100 using xda premium
It can get scratched. I have mine in a case almost all the time and I found a scratch on mine somehow
While it's not essential, I'd still go with a case, because you just never know what may befall your new shiny tablet. Since a lot of cases on the market appear to be cheap and ugly, buy something that is well built and from quality materials. This may set you back $50 or more, but trust me, it's well worth it. The tablet will just feel better in your hand, more secure, and you won't have to worry about the screen being scratched or it getting dinged on the side.
Ever since I got my Norever leather case I like the way my N7 feels way more than it does without it.
If you're only interested in a "back case" then I would consider the Incipio Feather. Here's my review. The Feather did come with a screen protector, but I'm with the others in this thread and I would just go with a full case to protect the whole thing.
FULL DISCLOSURE: The Feather was provided to me by Incipio for the purpose of review. I do not receive any compensation for my reviews.
Protection required
I would have to agree that i enjoy having my nexus out of a case . I like the feel of the back and for me it would not get scratched as im careful.. But I use it while im out and about all the time.. I have almost dropped it a few times.I think if you drop this device and it hits the edge of bezel The screen will crack.So i recommend having a nice case . For me i have the bobjgear silicone case . It does add bulk and the nice look of the device . But it provices alot of protection.
Happy Nexus Owner
Erica Renee
I am thinking of a simple plain matte black slim tpu case. Let's see if I can find one.
Sent from my Nexus 7 using xda premium
Well, having dropped my N7 twice, I can attest to getting a case for the Nexus lol. Both drops were from at least 3 feet and the first one went down rolling to the sidewalk from my truck in my Treegloo case. The N7 came unscathed but the Treegloo had an indentation that could barely notice. The second fall was in the garage cement floor. This time the fall was straight down back side down and went SPLAT. I freaked!:silly: and immediately took it out and found it turned on fine and the glass was uncracked. So I went inside and put the N7 down but noticed the cover didn't sit flush like it normally did, so I took the N7 out of the case and saw the backing corners were coming undone and I had to press down to re-snap them back into the corners again.
Now the treelgoo has been semi-retired now that I have the Seidio Active case on. It works because I now also use the Kropsson Aero modded universal car mount and using the treegloo wouldn't work in that case.
Simply... Yes
as in the title yes, I have had a couple of small falls and one or two larger ones, and having the stock official ASUS ones may have saved it a lot of times, so getting any that will have some bump protection is a definite go ahead
call it insurance
I like the naked feel of the N7 in my hand. It's just right. The options available are all over the map. Those folding contraptions remind me of the old paper maps that I could never get right. The armored ones look like two handers and you are going to drop test it because it's a job just to handle all that bulk. I'm going with a leather YooMee pouch [correction: they call it a sleeve] for transport purposes and working the N7 raw.
Noticed Otterbox just announced the Defender series for the N7.
I like Otterbox but $70 is too expensive for a plastic case. Hell, you get a hand made leather Noreve case for $72.
xips said:
I like the naked feel of the N7 in my hand. It's just right. The options available are all over the map. Those folding contraptions remind me of the old paper maps that I could never get right. The armored ones look like two handers and you are going to drop test it because it's a job just to handle all that bulk. I'm going with a leather YooMee pouch for transport purposes and working the N7 raw.
Noticed Otterbox just announced the Defender series for the N7.
Click to expand...
Click to collapse
I think this would be good. I am not too worried about dropping it but more want to protect it from scratches. A nice leather pouch is what I need. Thanks! Off to eBay
Sent from my Nexus 7 using xda premium
I only use a case outside of my house, otherwise for reading and such I go caseless. I have carpet everywhere and even with a couple drops it's not damaged. It's pretty solid.
ynrozturk said:
I like Otterbox but $70 is too expensive for a plastic case. Hell, you get a hand made leather Noreve case for $72.
Click to expand...
Click to collapse
You're right about that. I figure once things settle down they'll run in the $50 neighborhood. Still, as much as I love Otterbox, I'm afraid it will add too much bulk and that's entirely too much for a stand.
I've had all sorts of adventures with my nexus 7, and to be honest back plate is as good as new, the silver border however is a different story.
I went with a Cruzerlite TPU case $19 doesn't add any bulk really comes in all colors with cool design on the back (they are the androids)
I came from a moto Droid X and X2 these phones were very well protected in the trident kraken and electra cases i owned over the life of those 2 phones. Everything ive seen for this beauty has been "ultra slim" or something similar offering almost no real protection. The knockoff griffin survivor seems to be the only semi rugged case ive been able to dig up, am i really the only one that wants more protection than just a backplate? I don't have small hands or wear skinny jeans, and honestly I would prefer it to add some weight and size.
The only upcoming thing that gives me hope is the possibility of the rugged zerolemon case next month. Had anyone found something out there that i missed? I need topend protection for my $700 phone and i cant find it
gNOTE2 rolling in the north
there are otterbox cases, uag cases and many more. there is a whole thread on cases. ebay is literally infested with cases for this phone.
Otterbox defender is about as rugged , heavy and bulky as it gets. I own one myself but cant stand how much more bulkier the phone is, I much prefer just the extra weight of the zerolemon battery and its stock tpu case. Hoping the rugged version ZL case doesnt add too much bulk and has a nice kickstand.
Sent from my SPH-L900 using xda premium
d12unk13astard said:
Otterbox defender is about as rugged , heavy and bulky as it gets. I own one myself but cant stand how much more bulkier the phone is, I much prefer just the extra weight of the zerolemon battery and its stock tpu case. Hoping the rugged version ZL case doesnt add too much bulk and has a nice kickstand.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
If they put a kickstand on it, I will not only throw up but I'll throw up and curse YOU at the same time sir!
:laugh:
Otterbox uag dba casemate all make non rugged crap that lays in a pile on my desk. You cant call it protection if all you have on the front is a 1/10 inch or less raised around the edges... This is not protection and yes ebay is infested with 3 dollar cases that are flimsy and protect almost nothing.
I am asking about actual rugged cases like the knockoff griffen survivor or some "military" rugged style.
gNOTE2 rolling in the north
LordRalh3 said:
Otterbox uag dba casemate all make non rugged crap that lays in a pile on my desk. You cant call it protection if all you have on the front is a 1/10 inch or less raised around the edges... This is not protection and yes ebay is infested with 3 dollar cases that are flimsy and protect almost nothing.
I am asking about actual rugged cases like the knockoff griffen survivor or some "military" rugged style.
gNOTE2 rolling in the north
Click to expand...
Click to collapse
Since you mentioned the Survivor knock off, the Otterbox defender offers essentially the same level of protection. Your best bet at this stage is probably the heaviest Sedio case along with a tempered glass screen protector. Not optimal, but that's about as rugged as it gets.
I enjoyed my ballistics case before my ZL came in. Protected my phone from many countertop falls. I hoping the new ZL cases will be better than the ones that came with the battery.
Sent from my SPH-L900 using Tapatalk 4 Beta
apallohadas said:
if they put a kickstand on it, i will not only throw up but i'll throw up and curse you at the same time sir!
:laugh:
Click to expand...
Click to collapse
if you like it put a ring on it
apallohadas said:
If they put a kickstand on it, I will not only throw up but I'll throw up and curse YOU at the same time sir!
:laugh:
Click to expand...
Click to collapse
I'll bet you will throw up, curse, and piss your pants if they built additional battery into a kickstand Maybe I should email them with an idea lol!!!
Dammit, they still didn't reply back to me about rugged case preliminary pictures
---------- Post added at 10:43 PM ---------- Previous post was at 10:36 PM ----------
drnihili said:
Since you mentioned the Survivor knock off, the Otterbox defender offers essentially the same level of protection. Your best bet at this stage is probably the heaviest Sedio case along with a tempered glass screen protector. Not optimal, but that's about as rugged as it gets.
Click to expand...
Click to collapse
I second that! Seidio CONVERT with VITREO tempered glass - a very rugged solution!!! I personally find UAG with VITREO optimal for me whenever I carry a stock battery; and with addition of CONVERT holster with stick-on card/money holder which fit UAG like a glove - that my ultimate solution for the summer (especially with mesh shorts).
But I'm looking forward to ZL rugged case, and really hope it's not going to be like that honecomb tpu junk you find for extended batteries. Keeping my hopes high ZL guys will come up with something cool!
Thanks for the Sedio tip, they only had the active and surface when I was looking the last few times, that with a glass screen protector (and maybe another normal one on top of that) and i should be good to go.
.. If the ZL rugged isnt what it should be this will most likely be what I get next
gNOTE2 rolling in the north
LordRalh3 said:
Thanks for the Sedio tip, they only had the active and surface when I was looking the last few times, that with a glass screen protector (and maybe another normal one on top of that) and i should be good to go.
.. If the ZL rugged isnt what it should be this will most likely be what I get next
gNOTE2 rolling in the north
Click to expand...
Click to collapse
You REALLY don't need another screen protector on top of the tempered glass.
LordRalh3 said:
Otterbox uag dba casemate all make non rugged crap that lays in a pile on my desk. You cant call it protection if all you have on the front is a 1/10 inch or less raised around the edges... This is not protection and yes ebay is infested with 3 dollar cases that are flimsy and protect almost nothing.
I am asking about actual rugged cases like the knockoff griffen survivor or some "military" rugged style.
gNOTE2 rolling in the north
Click to expand...
Click to collapse
Just broke the clip on my Second otterbox belt holster .. same failure as the first . AT&T did warranty the first , we will see if they will the second next time i am upstate . Also its a constant battle taking the case apart to clean the fine dust that filters under the screen protector .
I dont see how your belt clip broke. I had a ***** of a time trying to remove it on purpose.
apallohadas said:
You REALLY don't need another screen protector on top of the tempered glass.
Click to expand...
Click to collapse
If you really need a rugged case you do. I broke my first note from a 12 foot drop in a otter box defender because I didn't have a screen protector on at the time.
TheBDub said:
If you really need a rugged case you do. I broke my first note from a 12 foot drop in a otter box defender because I didn't have a screen protector on at the time.
Click to expand...
Click to collapse
At 12 feet, you may want to consider bubble-wrapping that baby!
TheBDub said:
If you really need a rugged case you do. I broke my first note from a 12 foot drop in a otter box defender because I didn't have a screen protector on at the time.
Click to expand...
Click to collapse
Anything over about 6 feet is really a matter of luck. I dropped my Fascinate more than 20 feet down a granite face followed by 6 feet of free fall an landing on a granite boulder. It was in a decent case (Seido Active) but there was a whole lot of luck involved in its survival too. Not a scratch on it. It sounds like you weren't as lucky. But it's very unlikely that a screen protector would have made a difference. Film screen protectors won't protect against breakage, just scratches. For falls, the tempered glass will give more protection. It would be nice to have a fully ruggedized military grade case for the Note2, but they just don't exist.
If drops are your main concern, I would carry the phone in the Hsini pouch with either the Survivor or the Seidio Convert as a case. Then add a tempered screen protector. After that, it's a matter of luck. If you drop your phone from three feet and it lands screen first on the sharp point of a piece of hard ceramic, it just doesn't matter what kind of case it has.
Yeah, I learned not to have my phone out while putting up Christmas lights...
Sent from my SCH-I605 using Tapatalk 4 Beta
UAG is serving me well i have dropped mine many times from bout 4 ft and had no problems and its not very bulky
Honestly the defender is junk. It has really ruined my bezel with scratch marks all over it. Had to pop out the included screen protector because it didn't even come close to laying flat on the screen and caused dust to find it's way under the screen resulting in a sand paper effect happening under the protector. Sold mine on craigslist.
I work in construction and really need the ports covered so that limits most every other case. I agree, really isn't much on the market that offers protection I honestly think I could have faith in. Will go look at the few mentioned here and hope something better comes along.
GriffIn Fakes
I got the griffin fake because I wanted something really heavy duty, I like the look and they were really cheap.
I would recommend it to anyone. I did have a few issues:
1. The screen protector is crap, but you can remove it and find a nicer one of leave it off.
2. The hole around the sensor was too small so when you took the phone away from your face during a call it would not wake up, used a pocket knife and spun in in the hole a few times and it works great now.
3. The flap that covers the camera does stay put so you have to hold it while taking a pic or remove it (I removed it)
for all the issues I asked for a credit and my final price was 6 bucks
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome
opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html
I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.
I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app
I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.