Database Develop

[PROBLEM SOLVED]Odin keep failed

I was trying to root my galaxy note, I download the rooted stock rom (N7000DXLC2) from here http://forum.xda-developers.com/showthread.php?t=1535025
but the odin failed and showing this
<ID:0/013> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Rooted_Stock_Odex_N7000DXLC2.tar.md5 is valid.
<OSM> MODEM.tar.md5 is valid.
<OSM> CSC_N7000OLBLC2.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/013> Odin v.3 engine (ID:13)..
<ID:0/013> File analysis..
<ID:0/013> SetupConnection..
<ID:0/013> Initialzation..
<ID:0/013> Get PIT for mapping..
<ID:0/013> Firmware update start..
<ID:0/013> factoryfs.img
<ID:0/013> NAND Write Start!!
<ID:0/013>
<ID:0/013> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
then my phone can't boot anymore, it jus stuck at the samsung n7000 screen,
i tried to download stock rom and flash again, but it failed like above,
and when i go try to flash the kernel, it success to go to the recovery mode,
but it showing error like
E:Error in /cache/recovery/sec_csc.zip (status 7)
And i maybe forgot to enable usb debugging before i root, is this the cause? how i enable it now?
what can i do now? I tried to change port, change pc, uninstall kies, reinstall driver, close antivirus, and all doesn't work, please help...

To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and setting it in the options anyway.

bioweb said:
To be sure, take out all unnecessary USB devices and use a USB port that's directly attached to your motherboard. Without your phone attached load Odin and load all files. Put the phone in Download mode and hook it up to your pc. When Odin recognizes it then try and flash again.
Make sure there's not a trace of Kies on the pc, just have the drivers installed.
USB debugging should not have to be enabled. There's no way of enabling it without booting up the phone and set it in the options anyway.
Click to expand...
Click to collapse
I tried that, and I uninstalled the kies,
but the odin still showing the same error.

PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......

17n337 said:
PROBLEM SOLVED
for who facing the same problem, just include a pit file in PIT,u can find it here
http://forum.xda-developers.com/showpost.php?p=23234683&postcount=10
solving this for whole day,thanks god it worked......
Click to expand...
Click to collapse
CAUTION : Just dont go on blindly flashing the PIT file. Its a repartitioning file. To be used only when your partition is corrupted.

Galaxy Note stuck
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???

vinay28761 said:
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
...
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but
...
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
...
Can anyone explain my current situation...???
Click to expand...
Click to collapse
First: this thread is marked as solved since april. Chances are very low for a reaction (but at least I did)
Second: Make a new one in Q&A
Third: What do you mean with "Took the TB"? Especially when you flash a new Stock Rom after
Fourth: Did you put the tar-file under "Phone"? Should be "PDA".
Fifth: Read a lot in the stickies here - good start for handling Odin is Dr. Ketan's thread
Sixth: your current situation might result from not reading enough. I hope you didn't brick your device and can restore a running Rom with the instructions from the stickies. Good Luck

how exactly did you reach this situation?

Did you resolve this ?
vinay28761 said:
hello,
I was running stock ICS 4.0.4 on my GT-N7000. I rooted my device. Took the titanium backup.
After this, i opened odin. Under phone i provided the path to my downloaded ICS 4.0.4 file. Odin started flashing the device but operation failed showing:
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000DDLRB_N7000ODDLR4_N7000DDLR1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> factoryfs.img
<ID:0/010> NAND Write Start!!
<ID:0/010> Transmission Complete..
<ID:0/010> Now Writing.. Please wait about 2 minutes
<ID:0/010>
<ID:0/010> Receive Response form LOKE
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried many times but showing the same error everytime.
I am not able to go into the recovery mode......although i can go into the download mode.
When i reboot it says "Firmware upgrade encountered an issue. Please select recovery mode in kies & try again." There is no samsung logo or GT-N7000 logo when you reboot your phone. You only see this warning.
I have some imp data on my internal memory(Phone storage). I have to save that data. Please please please help me out. Is there any way to recover phone storage data???
Can anyone explain my current situation...???
Click to expand...
Click to collapse
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?

dannyogolo said:
@vinay28761
I have your exact problem. Phone came to me with problem of hanging on Samsung N7000 Logo.
After flash everything, it shows error, exactly like yours.
Were you able to fix it? How ?
Click to expand...
Click to collapse
Yes, i resolved it. I just followed dr. ketan's guide to flash through ODIN properly and exactly as described. I would request you to do the same.
Hope it solves your error too. If not, please post your screenshots.

could you jst give me details about dis nand write fail problem?i m having same problem in my gt n7000

Does anyone know where i can download PIT file for samsung gts6802 and a bootloader?
It woulb be very helpful. Thank You

[Fixed] First time rooting, accidentally flashed wrong ROM what to do from this point

EDIT: Rebooted my computer and phone and it flashed fine. Thank you for all the help. I'm off to explore the world of custom roms.
Finally decided to root my phone and install CM9 from GB 2.3.6 with the LA4 Kernel. Downloaded everything I needed as per Post 3 of this thread. Accidentally flashed the newer kernel instead of the pre rooted ROM.
Realizing my mistake, I tried flashing the correct ROM and PC Odin gives me a failure. The phone won't boot, it just stays stuck on the Galaxy Note N7000 Logo with an exclamation mark at the bottom.

Check if you have cwm (power+home +volume up) If so then flash this get the standard version, then go advanced options and reboot recovery...
After that do all wipes data/cache/Dalvik cache then flash the cm9 for n7000,then flash cm9 GApps then reboot...
After the system boots to android set it up and download triangle away and use it to get rid of the yellow triangle
If you don't have cwm then download a stock GB rom and flash it via odin... Start from scratch
Cheers
Tapatalking on my GT-N7000

what is the error pc odin giving you?

Don't quite remember anymore since it was from this morning. All I recall is the little box on the top left going red.
Could I try replicating the problem or do I risk damaging my phone?

odin won't damage the phone. As above poster said check if you have cwm, else use Odin again

nokiamodeln91 said:
odin won't damage the phone. As above poster said check if you have cwm, else use Odin again
Click to expand...
Click to collapse
No, I don't have CWM so I've been downloading a stock rom since I saw that post should take an hour with glorious third world internet. In the meantime should I fish out that error message you requested or is it not worth it at this point?

If you need all data back and everything to be working I would recommend you to flash back the same ROM you had earlier using odin.
Go back to Square 1.
Then root it from Dr Ketan's post.

as you downloading the rom. you are going to use Odin again. Let know the error

Yeap, another fail while using PCOdin.
Going to install samsung USB drivers from the file in this thread and get rid of Kies.
Here's the stuff from the little window.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> factoryfs.img
<ID:0/005> NAND Write Start!!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/007> Added!!
Edit: Tried again after reinstalling drivers. Still no go.
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7000XXLA4_N7000OXALA4_N7000XXLA4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

great

[Q] I9001 recovery problem

Hello,
My friend gave me a phone to wipe.
The problem is:
The Pattern is locked due to many attempts. (To many attempts for pattern)
He did try to flash CWM to it but now recovery is not working at all.
At this point he gave the phone to me.
I flashed fresh XEN firmware to the I9001 and the stock recovery is showing up again. But it still isn't working. It says in the bottom of the screen >>> status = 0 <<<
I can scroll through the recovery but even the reboot phone option doesnt work.
How can I perform an full wipe so that the phone doesn't ask for email/password?
I tried SPH-D710.ODIN_WIPE_CACHE_DATA.exe but that does nothing.
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
And then nothing, After 60 minutes it still hangs here.
Does anybody have some idead how i can wipe it via Odin or ADB?

Please, tell me what XEN firmware is, I've never read it somewhere (in connection to android)?!
Did you find out your I9001 is a special hardware release?
Did you try to flash a custom recovery like ClockWorkMode (CWM) Recovery or TWRP?
Do you want to keep this phone stock?
Greetings

S3 mini "Totally frustrated"

Please help! Ive got an s3 mini ( i8190N ) its unlocked & for the last few days ive tried to instal a custom ROM to which failed as the ROM i was using later in the thread stated its not for the "N" version of my phone so it all went "POP" and ive tried sorting this out but the issue i am having is i can only get into the "Developers Mode" & NOT recovery when i download the Flash file it comes in three yellow folders & the ODIN isnt recognising them? (Shows on the Super root file a BIN/META-INF & A SYSTEM File) its almost like its looking for an image but its not there? & i think this is where i am going wrong?
Please help Save my soul

i7demon said:
Please help! Ive got an s3 mini ( i8190N ) its unlocked & for the last few days ive tried to instal a custom ROM to which failed as the ROM i was using later in the thread stated its not for the "N" version of my phone so it all went "POP" and ive tried sorting this out but the issue i am having is i can only get into the "Developers Mode" & NOT recovery when i download the Flash file it comes in three yellow folders & the ODIN isnt recognising them? (Shows on the Super root file a BIN/META-INF & A SYSTEM File) its almost like its looking for an image but its not there? & i think this is where i am going wrong?
Please help Save my soul
Click to expand...
Click to collapse
Try downloading a ROM at Maclaw's website (maclaw.pl). Be sure to pick the ODIN file NOT the flashable zip one, and use odin tool to flash it.

"TraBeast" thanks for your time! ive done it i did what i thought would work:
PIT- \i8190N_goldenxx.pit
PDA- cm10.2_golden.maclaw.20140225.ODIN_TWRP.tar.md5
CSC- C_QXE_I8190QXEAMA1_20130109.163004_REV00_user_low_ship.tar.md5
& i got this text:
<OSM> cm10.2_golden.maclaw.20140225.ODIN_TWRP.tar.md5 is valid.
<OSM> CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what it is i am doing wrong pls??

i7demon said:
"TraBeast" thanks for your time! ive done it i did what i thought would work:
PIT- \i8190N_goldenxx.pit
PDA- cm10.2_golden.maclaw.20140225.ODIN_TWRP.tar.md5
CSC- C_QXE_I8190QXEAMA1_20130109.163004_REV00_user_low_ship.tar.md5
& i got this text:
<OSM> cm10.2_golden.maclaw.20140225.ODIN_TWRP.tar.md5 is valid.
<OSM> CSC_QXE_I8190QXEAMA1_20130109.163004_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas what it is i am doing wrong pls??
Click to expand...
Click to collapse
should take more time to read the guide and not rush through

"efaustino84" I have done? i cant get into the recovery mode and Odin is giving me errors?

Samsung galaxy Note GT-N7000 bricked. Need HELP!!

The phone shows " Firmware upgrade issue encountered an issue. Please select recovery mode in Kies & try again". I cant go to recovery mode ie. vol up+home+power. THings I have tried:
1. with Kies the device isnt recognised. I have updated the driver as well.
2. with odin every thing fails... flashing "all samsung recovery.tar", flashing stock jelly bean, flashing .pit file
I have googled for days and tried many things but isnt working. Need help

Where and why the stock firmware flashing is going wrong?

nokiamodeln91 said:
Where and why the stock firmware flashing is going wrong?
Click to expand...
Click to collapse
Hello,
Now the odin is not even recognising the device, Before it couldnt perforn the NAND write.

Start fresh... Remove battery and let the phone rest for couple of minutes.. Then try again.. Just go ahead and flash a stock rom. And check where it fails.

nokiamodeln91 said:
Start fresh... Remove battery and let the phone rest for couple of minutes.. Then try again.. Just go ahead and flash a stock rom. And check where it fails.
Click to expand...
Click to collapse
I had done what you've suggested. It dint work. The message in the odin3 v3.04 when trying to flash stock jellybean was
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

loveandroider said:
I had done what you've suggested. It dint work. The message in the odin3 v3.04 when trying to flash stock jellybean was
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_N7000XXLSZ_N7000OXALSZ_906407_REV02_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Complete(Write) operation failed.
<ID:0/003> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Where did you download this file from? SAMmobile?
Try redownloading the file, it may be corrupted during download.

AutumQueen92 said:
Where did you download this file from? SAMmobile?
Try redownloading the file, it may be corrupted during download.
Click to expand...
Click to collapse
Hello. I can say that the file isnt corrupt because I have flash that ROM a numerous time before. But until the last time when I was flashing custom rom night owl lollypop version, it stuck in boot loop and then when I tried to flash that , it dint work. Now I cant even go to recovery mode.

loveandroider said:
Hello. I can say that the file isnt corrupt because I have flash that ROM a numerous time before. But until the last time when I was flashing custom rom night owl lollypop version, it stuck in boot loop and then when I tried to flash that , it dint work. Now I cant even go to recovery mode.
Click to expand...
Click to collapse
As the log say "<ID:0/003> SetupConnection.." and not move ahead.. there is some connection problem with Phone and PC... Could be a driver problem.. or Kies might be running in the background...
There is no writing of data what so ever.

I tried in another laptop and it worked. My mobile was dead for weeks and its back to life. But I had samsung driver. I dint have Kies installed. dont know was the problem in connection. Anyways thanks to nokiamodeln91 and AutumQueen92 :good: