Hi,
I am fairly advanced in this stuff and generally i know what im doing, i used to have a HTC Desire HD and was always changing roms etc.
I have had a Galaxy S I9000 for a month or two now and recently i flashed Vanilla Rootbox ( http://forum.xda-developers.com/showthread.php?t=2122727 ) just like any other rom using CWM recovery as i always have done.
After finding i want to change roms, i am unable to boot into recovery mode, download mode and even bootloader.
I have tried using the key combinations to access all of these modes, ive tried using adb to access all three and whatever i try and do it just boots up normally to vanilla rootbox as if i had just booted up normally.
Just incase it means anything, when i try and boot into these modes, the Samsung Galaxy S I9000 Screen (the boot screen before the Vanilla Rootbox one) shows up for about 4-8 seconds and then disappears for not even a second (the screen just goes black almost like it tries to load the mode but then redirects itself to a normal bootup) and then shows the same screen again for a further few seconds, before going to the Vanilla Rootbox boot screen, from there it just loads up normally.
I have searched all over the internet for a solution and there isnt even any posts with the exact same problem.
I really would appriciate any help with this as i am stuck with this rom which in my opinion is awful and drains the battery on my device.
Thanks, Jake:fingers-crossed:
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
slow--welder59 said:
have a read here http://forum.xda-developers.com/showpost.php?p=30415128&postcount=1
Click to expand...
Click to collapse
nope, still no luck
i think it has something to do with the rom as i have had no trouble with other roms, do you know if there is a way to flash a rom without using bootloader, download mode or recovery?
thank you very much for the response by the way
Mate you tried a USB jig?
Sorry for late reply, bought a Jig in the end as they were down from £10 to £1.60 on amazon! worked like a charm, straight into download mode, back to stock rooted and now back up and running rooted with cyanogen 10.1 nightly, very nice!
Close Thread, - JIG IS THE ANSWER.
Related
hi all, I have my captivate stuck on the at&t logo, I cant get it to recovery mode. is there an "idiot" guide of how to flash it into recovery or back to the stock version?
thanks in advance!
Use odin to flash back to stock. Just search it. Will correct any mistakes you made.
Sent from my SAMSUNG-SGH-I897 using XDA App
What did you do to get it this way?
im stuck on the same thing i cant get into download mode though
becuse my phone ethier boots into the battery screen and doent stop boot again and again
or
it goes to the att screen and then turns off and goes to the screen again and again
i just update it to the ofical 2.2 and flashed backed using ondin3 one click to root the phone
how do u force the phone into download mode
ive tried all the butto combutions
Well,
axis01 said:
What did you do to get it this way?
Click to expand...
Click to collapse
I used clockwork mod and formatted all of the options including system and etc etc
UnBrickable mod is easier then 3 button fixes or jigs.. Simply remove the battery, replace the battery, plug into USB, then click the "Download Mode" button. After that, use a Heimdall One-Click to flash software. There's no fooling around with timing or trying to get the order correct, or anything... it just goes into download mode every time.
Just thought I'd put that in here. I like UBM, it's great.
I did the same, you found the solution?
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
Did you find the solution, because i´m in the same problem but worst because my sgs2 doesn´t turn on anymore, please help
charlie2610 said:
I followed the same "idiot" guide of how to flash it into recovery or back to the stock version.
Screen at & t appears and restarts again and again.
I can't enter in the download mode. I tried all the combinations of the 3 buttons and nothing.
You could find a solution? help please..
Click to expand...
Click to collapse
You have a few options and these options are as much as we can help you here.
1) Keep trying the button combos. It just might work one of these times. If you ever get it into download mode then try to flash it back to stock immediately.
2) Buy a Jig. They are available for cheap and will probably help you out. They force your phone into download mode and will allow you to flash it then.
3) Do the unbrickable mod. This involves sending your phone off for a few days, spending some cash, and having it worked on. It will come back in working order and there are even ways to have the person who worked on it flash a custom rom for you.
These are your options. And honestly, more than telling you the above, I dont think there is much more help we can offer here.
EDIT: Holy hell I just realized this post is from April. I just wasted a few minutes typing all of that. Damn.
yea. Thread resserection
Sent from my Captivate using XDA App on Team Hacksung ICS
Hi all,
I recently got a samsung i9000 after owning an htc desire for a while.... I was more than happy with cm7 on the htc so i rooted etc and installed it on my galaxy... but it seems that its a bit more buggy on the i9000 port and i had loads of force closes and my phone was pretty unusable... so i then used clockwork recovery to install what i believed was the correct version of darky's rom 10.2 (http://forum.xda-developers.com/showthread.php?t=814091) and now im stuck in a bootloop... when i turn it on for 'normal' use, the original GALAXY S logo comes up (the one that says SAMSUNG at the bottom of the screen.... then it switches to the GALAXY S logo with cyanogen(mod) underneath it, then it restarts and im back to the original SAMSUNG logo.
I've tried to enter download mode (vol down, home then power) and when i do this, it just restarts with the original logo in a loop until i let go, then the cyanogen(mod) logo comes up.
Ive downloaded kies and odin to a fresh machine, but when i connect the phone over usb, I get the litter circular timer icon lighting up my phone for a few seconds, then the cyanogen(mod) screen comes up for a few seconds.... and then reboots....
Anyone got a way out for me? ive been without a phone for a few days and its really hurting now!
So you can't get into download mode??, did you flash back to stock rom before flashing Darky's? Because with CM7 a froyo bootloader is needed, and with Darky's a GB bootloader is needed. If you can get into recovery, go to mounts and storage, format system, data, cache, and datadata. Then pull battery out and try getting into download mode again Vol down + home + power. Report back dude
Sent from my GT-I9000 using XDA Premium App
Heya, thanks for your help, I now see what it is ive done wrong (did not go back and flash a stock rom) but i cant seem to get into download or recovery at all... is there another key combo aside from vol down, home and power button?
deeuk said:
Heya, thanks for your help, I now see what it is ive done wrong (did not go back and flash a stock rom) but i cant seem to get into download or recovery at all... is there another key combo aside from vol down, home and power button?
Click to expand...
Click to collapse
No I'm afraid not, their are two other things you could try....using adb booting into download mode from their....or a jig....that will force it into download mode, u in the UK??
Sent from my GT-I9000 using XDA Premium App
I guess you need a jig to get into download mode. after that, try to flash to different ROMs and see if you have fix the problem.
If you internal sd card is physically damaged, try this method here:
http://forum.xda-developers.com/showthread.php?t=1188482
Yep, Im in the UK.... I dont think the internal sd is damaged as it was fine before flashing darkies rom... Ive not used adb to try and force a 'download mode' before.... handy link to a tute?
sorry for my brevety, im quickly writing this at work!
deeuk said:
Yep, Im in the UK.... I dont think the internal sd is damaged as it was fine before flashing darkies rom... Ive not used adb to try and force a 'download mode' before.... handy link to a tute?
sorry for my brevety, im quickly writing this at work!
Click to expand...
Click to collapse
I could send you my jig if you like? As long as you send it back when finished?? PM me if you want it because in all honesty if your not familiar with adb I wouldnt go messing around with it
Sent from my GT-I9000 using XDA Premium App
so today i upgraded to gingerbread 2.3.5 on my samsung captivate or i-897. it was all fine until i started to try the teamhacksung build 16 for ICS. i was trying to install it and somehow my phone locked up on me. everytime i try to boot up my phone it goes to galaxy s and just sits. i can get it into recovery and download but then odin will not pick it up? help?
that rom has a Q and A page. go there to ask questions about it. NOT the DEV PAGE. Q&A.try searching the thread. and reading it.
100% chance your problem has been asked at least 10 times.
i went there and searched im sorry it hasnt been thats why i posted a thing. so stop being so rude and help someone out really.
Calko2882 said:
i went there and searched im sorry it hasnt been thats why i posted a thing. so stop being so rude and help someone out really.
Click to expand...
Click to collapse
You need to be in download mode for odin to pick it up. Start odin first then with your phone off, hold in your up/down volume keys and plug in your usb cable.
Sent from my SAMSUNG-SGH-I897 using xda premium
telling you the proper place to post a question is not being rude. Im trying to help you find other people that have the same rom setup as you. they dont always look at other threads like this. they only care about THEIR ROM. so posting there, they would find your question... here they wont.
and the answer to your very first problem... if the rom install locks up (which it RARELY does) flash again.
**normally it "looks" like it locks up but the user is actually impatient, or the install script doenst program the status bar very well and it looks like its not doing anything although it is.
and first boot after flashing can take upto 10 mintues at boot animation.
ive done all of this plenty of times, ive even read how to create them. and i know you do as well. ive done all the odin i can but it got stuck at the galaxy s boot screen like the black one with white lettering and the i897 tag too. but it wont go past, and now wen i plugged it in it bricked so i have no idea wat to do now and i love this phone to death.
Calko2882 said:
ive done all of this plenty of times, ive even read how to create them. and i know you do as well. ive done all the odin i can but it got stuck at the galaxy s boot screen like the black one with white lettering and the i897 tag too. but it wont go past, and now wen i plugged it in it bricked so i have no idea wat to do now and i love this phone to death.
Click to expand...
Click to collapse
Can't you just flash something from recovery? You probably put some ROM on your sd at some point. And if not, you can do that with USB from recovery
Sent from my CM9 ICS i897 Captivate
Once you didn't get past the boot screen you should have three buttoned to recovery and flashed the from again. It happens quite often when you go to THS ICS or CM7. So if your not truly bricked which you shouldn't be unless you used a Odin with boot loaders then just used Odin and flash speed mod kernel or another kernel that will give you the correct cwm recovery. Then BEFORE trying to reboot flash the ICS ROM, then when it finishes flash it a second time BEFORE REBOOTING, then flash gapps, then reboot.
What happens is that the first time you try to go to cm7 or cm9 it basically flashes the kernel and cwm recovery from I can tell, then the second flash will be able to get you through all the boot up. Plus wait a while without touching it and it will come up. It takes a while on the first ever flash to it.
Sent from MY SPH-P100 running ICS
how can i put it on through recovery? and my usb debugging isnt on my fone just spazzed when i was loading up ics nd now its softbricked.
i actually just unbricked but i am still stuck at the galaxy s sgh-i897 screen thats black and white.
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
vinte007 said:
Hello XDA peeps,
So here is my situation, some days ago (like 3-4 months ago) I installed CM 10.1 on my Captivate. Everything went well and I can even open my phone and use it. But the problem was, after installing that ROM, I no longer can get into recovery mode or download mode. I tried everything possible, the button combo method, button combo and battery pull in method, button combo and USB pull in method and also tried ADB "restart recovery / reboot download" I think, (does not remember because it was 3-4 months ago). Tried everything correctly and stopped trying when I could not get into download mode or recovery mode. The last option I have is a USB jig, but the thing is I don't have it and I will need to buy it from abroad if I want it.
Some more information: When I try to put it in download mode, it gets in a boot loop (I see the AT&T logo and then reboots), the boot loop stops when I leave the buttons. And also when I switch on the phone, it does display the battery charging animation.
And also I've heard some people saying that it might be because I flashed some incompatible kernal or something. (This might be true, because I also don't remember what I did to flash the ROM )
So, I want to fix this now because I want to update my phone to the CyanFox 4.3 ROM which seems very cool . Is there anyway I can fix this recovery mode or download mode on this phone so that I could flash a new ROM to my phone (without the jig if possible)
Thank you lots peeps.
Click to expand...
Click to collapse
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
BWolf56 said:
Download and recovery mode aren't affected by ROM flashing. If you can run your phone just fine, then your kernel is fine.
Now my guess is that one of your button isn't working properly, or that you're using the wrong combo. That being said, when you hold the power button (while phone is powered on), you should have an extended menu that gives you the option of booting in recovery or download mode, have you tried those?
As for a jig, you can make one if you don't wanna order one. It's fairly simple and we have a guide in here on how to for just a couple bucks.
Click to expand...
Click to collapse
Thank you for your reply. Yes I did try that also. But it just does a normal restart. I tried the the ADB "reboot recovery" also. It also didn't help. I even downloaded an app to reboot into recovery, but no help.
And yesterday I got a jig from my friend, it worked on his infuse but did not work on my Captivate. He said that it might be because he is using a 330K resistor. So I ordered a jig from ebay. It will take some time to reach here.
Is there anything else I can try? maybe push a recovery or something using ADB? Sorry if I am being noob here
Once again, thanks for your support.
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
BWolf56 said:
At this point i would just wait for the jig. And yes, Samsung galaxy jig requires 301k.
Sent from my SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Ok, I will wait for the jig and when I get it, I will post the result.
Once again Thank you for your help
Aaaand all of a sudden I was wondering, can this be a bootloader problem? Maybe my bootloader got locked somehow or something?
The best thing is still to wait for the Jig or make one, as BWolf56 suggested.
Once ya have the Jig and If u can get into Download Mode with it, I suggest that u flash the One Click Odin or Heimdall Stock Android 2.3.5 i897uckk4 that includes the Bootloaders. (See the stickied One Click thread in the Dev forum, Post #3). If that is successful, do not flash any Bootloaders again. U can then proceed to flash the KK4 Corn Kernel, the .tar version of the kernel v7.0A, through Odin and then use that CWM Recovery that is baked into that kernel to go on flashin other Roms, etc.
If u cannot get into Download Mode with the Jig, then ur micro usb port of ur phone may be the fault. (But still an app should work from the play store to reboot to download or recovery)...anyway that is all i got for now.
Keep us posted.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Hi there! Now, firstly, ive always used Windows Phones but, would like to join Android and discover what it is really like to use... It really does look like fun to use
Anyway, last night i got my mums old Samsung Galaxy S1(G-I9000) and tried to root it and put CyanogenMod on it so i could get arid of the broken TouchWiz(I don't know what the new versions of it are like, but this one was broken and horrible to use) and get updated to Android 4+. Now, the root was successful and i am very happy with myself for doing that.... But here is where it all fell apart....
So, i jumped on their guide on their cyanogenmod wiki and it turns out that doing that first step(The "Installing a custom recovery on Galaxy S") was not needed because i already had ClockWork on my phone and that doing it would apparently break my phone.... I did not realise that till afterwards.
When i tried to reboot into recovery mode to install CM it got stuck on the boot screen. I think to myself maybe its stuffed and ill just reboot it again and see if it work... Nope. Now i try to reboot normally and leave it alone.... Nope. Turns out, all i can do is get into download mode. Now, from what ive found online, using Odin to reflash my phone with the stock ROM is how to fix my phone, problem is, Odin is not finding the phone and Hard Resetting the phone by holding down Lower Volume button and power is not working.... How can i fix this?
I think you can still recover it. However, the reason Odin might not recognize it it's probably because you haven't installed the Samsung USB drivers
If you install them and try to go into Download mode again you might be able to flash the stock ROM back onto your Samsung phone