Database Develop

[Q] HELP: Phone stuck in MOTOROLA BOOT LOGO

Hi, so I have a Motorola Razr I running the Brazilian Retail JB rom with unlocked bootloader and root.
My friend who has the same phone as me suggested me to install "AIO mod v6" from Arman. He gave me all the files needed and I went to work with it. However, he didn't tell me i need to have a EU JB rom and all the system apps ( I had done the very stupid thing of deleting system apps instead of freezing them). After i installed now the phone is stuck in the boot logo and when i try to flash a new rom with CWM it just gives out a error Status 7 since I don't have all the system apps I think.
Do i have any way out of this mess?!
Please help!
Thanks.

Flash your Firmware back (latam).
http://forum.xda-developers.com/showthread.php?p=40417328
Use RSD Lite 6.1.4 with this How To
http://forum.xda-developers.com/showthread.php?p=33712189
Gesendet von meinem XT890 mit Tapatalk 2

HSD-Pilot said:
Flash your Firmware back (latam).
http://forum.xda-developers.com/showthread.php?p=40417328
Use RSD Lite 6.1.4 with this How To
http://forum.xda-developers.com/showthread.php?p=33712189
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
I just tried doing that but i get this error on RSD Lite "Failed flashing process. Unknown fastboot command...". Also on RSD for some reason no information of my phone is showing up on Device Properties.
Could you please help me out?

You connected in AP Fastboot Mode?
The Fastboot File is extracted without an error and your Drivers are actual?
Gesendet von meinem XT890 mit Tapatalk 2

HSD-Pilot said:
You connected in AP Fastboot Mode?
The Fastboot File is extracted without an error and your Drivers are actual?
Gesendet von meinem XT890 mit Tapatalk 2
Click to expand...
Click to collapse
Finally figured out the Problem. The XML file of the brazilian retail rom had a line of code with GET VAR and it was messing up everything.
So after i edited the xml file i managed to follow your instructions and it worked perfectly.
I couldn't do it without your help! Thank you so much!

Can't update B830 to B853

I have problems with upgrading from B830 to B853. Every time I try to update, it just ends up in TWRP and I will just have to reboot.
I downloaded the update.app from http://consumer.huawei.com/de/support/downloads/detail/index.htm?id=58465 hoping that would work. I have also tried downloading it using Updater (only 70MB there) but the result is same. I thought it would be a fast update for better performance, don't really want to do a clean install at this moment.
Any suggestions? Has anyone had the same problem?
I've got Team Win Recovery Project v2.8.7.0 for HWP7-L10.
Log:
Code:
Updating partition details...
... done
Full SELinux support is present.
Processing AOSP recovery commands...
Installing zip file 'data/share/0/'
Installing 'data/share/0/' ...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
E:Failed to sysMapFile 'data/share/0/'
E:Error installing zip file 'data/share/0/'
Done processing script file
MTP Enabled
Copied recovery log to /cust

you have to go to stock boot.img and recovery.img from the b830..
how to get these and how to flash is explained several times here in the forum..
Gesendet von meinem Mate S CRR-L09 B145

blueIBI said:
you have to go to stock boot.img and recovery.img from the b830..
how to get these and how to flash is explained several times here in the forum..
Gesendet von meinem Mate S CRR-L09 B145
Click to expand...
Click to collapse
Okay, thanks. I will search for it. Would that result in a clean install?
By the way, how's Mate S compared to P7 working out for you? Worth the upgrade?

depends on how you update..
via local update it is not a clean install..by force update it will be a clean install (what i recommend, and after update a factory reset)..
the upgrade to the mate s is worth it, better performance, more features, brighter and clearer display, btw bigger
Gesendet von meinem Mate S CRR-L09 B145

I may have seriously messed up. I tried to clean install but that still led to the same error. After that I tried to go back to original boot.img and recovery.img using adb but now I can't go anywhere. TWRP won't start (as expected because I flashed recovery.img) and it just says "Unfortunately boot failed, get more information ...".
Need some help.
UPDATE: I managed to get TWRP back but how do I install B853 update.app from there? I can only manage to get to TWRP sometimes, it mostly just reboots. fak
I really need my phone; this is making me very nervous.

I got it installing (this screen http://oi59.tinypic.com/27xhvna.jpg) but after 10 minutes my phone is ridiculously hot and it is STILL verifying update package (loading bar gets stuck 10% from end)... PLEASE HELP ME, I don't have money for a new phone.
UPDATE: managed to FINALLY reinstall B830 thank god. I'm scared to retry updating to B853.

How to solve brom error & flash official firmware update on my lenovo k3 note k50-t5?

How to solve brom error & flash official firmware update on my lenovo k3 note k50-t5?
@emptywordsss pls #help. i m trying to install android 6.0 marshmallow in my lenovo k3 note k50-t5 several time but every time sp flash tool shows BROM ERROR (IMAGE) & nothing show in flashing progress bar. it take 1+ hrs to show the error. pls help me to solve the problem.

Hi,
I woud set from Firmware Upgrade to download and I would uncheck the preloader.
Gesendet von meinem Lenovo K50-t5 mit Tapatalk 2

Yes,Change the "firmware update" to "Download"

Or root phone and twrp recovery then flash ROM via twrp

Anunay.j said:
Yes,Change the "firmware update" to "Download"
Click to expand...
Click to collapse
Dear bro @anunay followed ur advc but nothing happened. :crying:

JRapsky said:
Hi,
I woud set from Firmware Upgrade to download and I would uncheck the preloader.
Gesendet von meinem Lenovo K50-t5 mit Tapatalk 2
Click to expand...
Click to collapse
:crying: same as before :crying:

Have You set "DA DL all with Checksum" (USB & Storage Checksum) in Options >Download

Anunay.j said:
Have You set "DA DL all with Checksum" (USB & Storage Checksum) in Options >Download
Click to expand...
Click to collapse
Yes option>download>general setting> both check

Have you installed proper vcom drivers?

aswinp222 said:
Have you installed proper vcom drivers?
Click to expand...
Click to collapse
Yes

Oreo Update Thread - L29C432

Hi there,
here some instructions and files for updating your Phone from Nougat to Oreo.
And how you can try a treble build and how do you come back to Stock Rom.
We start with updating Nougat to Oreo (B321_L29_C636) :
Delete fingerprint and lockscreen pin before you update!
Backup Apps etc with Huawei Backup
Extract the folder of this zip on your external sd card:
https://www.androidfilehost.com/?fid=817906626617955728
and flash oreo_update.zip with twrp.
Then its boot into nocheck recovery and install oreo.
After reboot your bootloader is still open and all apps are still there.
But you need to login to all your running accounts again. Game datas are lost too.
Some things like Themes are not working right now and you have the wrong build number.
We fix that now :
Reboot into fastboot and flash oreo twrp. (fastboot flash recovery_ramdisk twrp_oreo.img)
https://androidfilehost.com/?fid=673791459329072916
boot into twrp, flash supersu for oreo and reboot.
https://www.androidfilehost.com/?fid=745849072291698567
Thanks to "LastStandingDroid" for modified supersu.
Install a root explorer and browse to the following path:
/cust/hw/ rename "spcseas" folder to "eu"
/version/special_cust/VKY-L29/hw/ rename "spcseas" folder to "eu"
/data/hw_init/version/special_cust/hw/ rename "spcseas" folder to "eu"
then reboot.
For VKY-L29C185:
/cust/hw/ rename "spcseas" folder to "meafnaf"
/version/special_cust/VKY-L29/hw/ rename "spcseas" folder to "meafnaf"
/data/hw_init/version/special_cust/hw/ rename "spcseas" folder to "meafnaf"
If something not working well please make a factory reset with original recovery.
https://www.androidfilehost.com/?fid=673791459329071154
flash with fastboot:
fastboot flash recovery_ramdisk Original_Recovery_B321.img
Later i will add the treble part!
Here you can take a look:
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
I'm not responsible for any bricks.
Thats how I did it and its working fine.

We solve it with rename instead of flashing data file because it will come request for other firmwares.
I add a Rollback later.
Gesendet von meinem VKY-L29 mit Tapatalk

Everything work for me. If you want make a factory reset after install flash original recovery before. I upload it later.
Gesendet von meinem VKY-L29 mit Tapatalk

Is it suitable for VKY-L29C185 model?

Added rename instructions for VKY-L29C185

Rommco05 said:
Ok if I have acces to internal storage I will tommorow morning install Oreo. Is some chance you upload stock recovery to tommorow morning? Ou, anyway I can extract it from main zip (update.zip)? One more Q, if I flash stock recovery I don't need supersu and basically I can relock bootloader with stock recovery right?
Click to expand...
Click to collapse
Here is the original recovery but i would not relock the bootloader. Its possible that you brick your phone.
https://www.androidfilehost.com/?fid=673791459329071154

Rommco05 said:
Ok, change my mind I stay with custom recovery but before I make factory reset with stock recovery. Thanks for sharing. I like clean start. Before reset I will rename folders
---------- Post added at 22:59 ---------- Previous post was at 22:57 ----------
Need I flash stock recovery2 before reset?
Click to expand...
Click to collapse
Added flash instructions for original recovery. Only normal recovery needed.
Gesendet von meinem VKY-L29 mit Tapatalk

Hi blackball first of all thank you so much for keeping our p10p alive and updated....
My model is vkyl29c185 running fromfuture 201 without rebranding
Can i flash the oreo as per the OP directly without rebranding or any hassles.. Pls

Yes. Just rename folders like C185 instructions
Gesendet von meinem VKY-L29 mit Tapatalk

When you will put instructions for Rollback to Nougat L29C432 or to B201 L29C432 ( your room )? ThankZ

If you give the support there.. It's not my language [emoji1]
Gesendet von meinem VKY-L29 mit Tapatalk

Hi Blackball. First of all, thank you for beeing here helping us.
I have a little trouble. Of course my p10 plus is making weird stuff. I've downloaded the oreo zip file into my phone, and sent to my SD root (with es explorer pro). Booted on twrp, and launched the zip, but I get an error, zip signature failed, followed by invalid zip file format.
I am on fromfuture b201 . Shouldn't it work with this ROM?

dj_varizes said:
Hi Blackball. First of all, thank you for beeing here helping us.
I have a little trouble. Of course my p10 plus is making weird stuff. I've downloaded the oreo zip file into my phone, and sent to my SD root (with es explorer pro). Booted on twrp, and launched the zip, but I get an error, zip signature failed, followed by invalid zip file format.
I am on fromfuture b201 . Shouldn't it work with this ROM?
Click to expand...
Click to collapse
You must unzip (extract) the OREO_UPDATE ZIP TO ROOT OF SD CARD AND FIRST flash from b201 twrp the oreo_update (it is zpped in OREO_UPDATE. zip) did you read the first post with instructions?
Poslano sa mog VKY-L29 koristeći Tapatalk

Alora6501 said:
You must unzip (extract) the OREO_UPDATE ZIP TO ROOT OF SD CARD AND FIRST flash from b201 twrp the oreo_update (it is zpped in OREO_UPDATE. zip) did you read the first post with instructions?
Poslano sa mog VKY-L29 koristeći Tapatalk
Click to expand...
Click to collapse
I did, but didn't understand I had to unzip before. I will try it now. Thanks for the help mate! (getting old leads to get stupid....)

Rommco05 said:
How I can make rollback to Nougat if is possible, thx
Click to expand...
Click to collapse
Look at this thread
https://forum.xda-developers.com/showthread.php?t=3724382
Gesendet von meinem VKY-L29 mit Tapatalk

Slightly off-topic question:
I'm considering getting this phone,but,I was curious if the EMUI PC-Desktop mode (found on the Mate 10/Mate 10 Pro) is included in the Oreo update for the P10/P10 Plus ?

At the moment it's not included
Gesendet von meinem VKY-L29 mit Tapatalk

Blackball said:
At the moment it's not included
Gesendet von meinem VKY-L29 mit Tapatalk
Click to expand...
Click to collapse
Thank you for the prompt response, it's greatly appreciated.
Still interested, considering this vs the Mate 10 Pro.
TBH, I'd seldom find a real world use scenario for the Desktop Mode.
For myself, the expandable storage & front FPR/nav button trump the Desktop Mode, if forced to choose between the two,not to mention the price difference
Will likely order a P10 Plus by the end of the week/upon sale of my Sony XZP.
Once again @Blackball , thank you for the prompt response. :good:
Sent from my Sony Xperia XZ Premium using XDA Labs

I have a VKY-L29C432 with fromf b201 and when I give flash to oreo_update.zip in twrp the phone restarts.
Trimis de pe al meu VKY-L29 folosind Tapatalk

Then you did something wrong. Make a Screenshot of your folder that you have extracted
Gesendet von meinem VKY-L29 mit Tapatalk

SOLVED! Stuck in 8.0.0.046(01BN) / Can't flash any TWRP

Hi guys,
got a little problem on my VTR-L09C432.
I got Oreo running like explained right here: http://www.stechguide.com/install-android-8-0-oreo-on-huawei-p10/#comment-12332
After that, Oreo bootet fine. But to get a clean install, I did a factory reset.
After that my Version is 8.0.0.046(01BN) and not 8.0.0.311.
There are a few little bugs so I decided to flash once again. I tried to flash TWRP in fastboot mode. -> No success
I tried to flash with the following command: fastboot flash recovery_ramdisk twrp***.img -> SUCCESS!
BUT no i get an Error message when trying to boot into recovery:
Attention! Please update system!
"- picture of the little green guy-"
Error!
Func No 11 (recovery image)
Error No 2 (load failed)
gettin into eRecovery is no Problem. System boots fine and runs better than Nougat, better battery life, with a fews little bugs.
How do I get a TWRP running?
In case if no chance, how do I get system oreo Recovery flashed an running?
Will it be possible to get official updates, when I will get back to original recovery?
One big bug is that my screen won't turn on when receiving notifications... even not with the help of a third party app Any idea how to fix it anyway?
If TWRP will be flashed successfully, is there a Chance to flash these 3 Update-Files through twrp?
Thx a lot!

You have flashed a C900 and you have a C432. So your device didnt find all needed files.
Try to flash this twrp (its in a MEGA Folder) and report .
https://forum.xda-developers.com/honor-9/how-to/stf-l09c432-how-to-install-oreo-h9-t3707729

Thx for your reply. You mean there are files, which I need to flash again for my c432 device?
I flashed the twrp from your link.
Flashing was fine but no chance to get into twrp. Still the same error.
Can I flash the RAMDISK or Recovery Ramdisk from your mega-source?
UPDATE: I flashed STR_Stock_Recovery from your Mega-Folder and got success. Now I can boot into stock recovery and into Erecovery. But still no TWRP is working...
UPDATE2: I got a working TWRP by flashing this one: https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Now my question...can i flash the Supersu from your mega-folder onto my P10? Or will it be bricked?
Gesendet von meinem VTR-L09 mit Tapatalk

SOLVED!
Hi Guys,
Problem is solved! For those who got the same problem, follow these steps:
You need this link for all following steps(thx to blackball!): https://forum.xda-developers.com/honor-9/how-to/stf-l09c432-how-to-install-oreo-h9-t3707729
If you haven't got fastboot error, start at point 2.!
1. To get Fastboot Error removed, flash Stock Recovery from link above (in fastboot mode)
2. boot in fastboot mode (shutdown, restart by pressing power&vol- with usb cable attached)
3. Flash TWRP Recovery from link above fastboot flash recovery_ramdisk TWRP***.img
3.1. if this doesn't work, flash TWRP attached below this link
4. boot in to twrp recovery (shutdown phone, restart by pressing power & vol+)
5. Flash supersu.zip from link above
6. reboot
7. install root browser or similar from playstore
8. get root privileges to root browser
9. reboot
10. navigate to /cust/hw/
11. rename "normal" folder to "eu" (without the quotes)
12. navigate to /version/special_cust/STF-L09/hw
13. rename "normal" folder to "eu" (without the quotes)
14. reboot
15. that's it!
Thx to blackball for the help!
TWRP link:
https://drive.google.com/drive/folders/1twgKVop02omG9vuVyc8ELwMxtB6nCko1

Thx for this guide, i will try it later!!! But whats the main change now???
When i see it clearly, then you still have the 8.0.0.046 Version on your device... But you have a working TWRP.... And you will receive official updates?
I am wondering, becaus i did the same with my P10 ( i am on 8.0.0.046 too) and i am not sure, if this is an official version with official updates... If it isnt, i will try to go back to Nougat...

stefan.irmen said:
Thx for this guide, i will try it later!!! But whats the main change now???
When i see it clearly, then you still have the 8.0.0.046 Version on your device... But you have a working TWRP.... And you will receive official updates?
I am wondering, becaus i did the same with my P10 ( i am on 8.0.0.046 too) and i am not sure, if this is an official version with official updates... If it isnt, i will try to go back to Nougat...
Click to expand...
Click to collapse
After these steps, you have 8.0.0.311 version, themes working, screen on notification working and so on.
Gesendet von meinem VTR-L09 mit Tapatalk

Hey cologne83!
First of all, thanks for this helpful guide, now i see finally 8.0.0.311 on my phone
But you dont actually need the root browser, because you can change those folders in twrp too!
Secondly i have a question:
cologne83 said:
5. Flash supersu.zip from link above
Click to expand...
Click to collapse
how did you do this? everytime i boot in twrp it shows me only gibberish until i go one directory up.
Root on Oreo would be super nice

Put zip file on external SD card. Your internal is encrypted.
Gesendet von meinem VTR-L09 mit Tapatalk

ok, i hoped it is on Android O not encrypted anymore.
But anyway thank you works likes new now!
just a little bit off topic question: is there any new version available? when i check systemupdates it says that that my Version (8.0.0.311) is the latest available. just wanna be sure

deleted

8.0.0.046(04vt)
Does someone has a solution for the 8.0.0.046(04VT) version? If I navigate to /cust/hw/ I find now two folders: eu and normal. In /version/special_cust/VTR-L09/hw I find the eu. folder. So what to change here? Thx
anabolic_guy said:
I have upgraded from Nougat to Oreo following the guide written at the beginning of this post.
Oreo now is installed, phone is not rooted and when I go to fastboot mode to flash Oreo TWRP, this happens:
C:\adb>fastboot flash recovery_ramdisk twrp_oreo.img
target reported max download size of 471859200 bytes
sending 'recovery_ramdisk' (20336 KB)...
OKAY [ 0.474s]
writing 'recovery_ramdisk'...
FAILED (remote: Command not allowed)
finished. total time: 0.498s
Bootloader and frp are both opened and RED in fastbooot mode.
The build number is: System 8.0.0.046(01UV)
EMUI version: 8.0.0
Android version: 8.00
Some ideas ?
Thanks for th attention.
Click to expand...
Click to collapse

This guide is my last chance to save phone. Afther update to b360 my phone brick, no recovery, no eRecovery, no TWRP.... I can flash all but nothing change

urbanboymne said:
This guide is my last chance to save phone. Afther update to b360 my phone brick, no recovery, no eRecovery, no TWRP.... I can flash all but nothing change
Click to expand...
Click to collapse
Which guide? If you are able flash you get access to phone so it should work in some way

kwaichang said:
Which guide? If you are able flash you get access to phone so it should work in some way
Click to expand...
Click to collapse
Yes i'm able some recovery images or twrp, also all system.img i can flash withouth problem, cust.img... But nothing change. Somethimes stay in boot black screen, somethimes reboot to ERROR MODE, and also i'm able to get into fastboot mode, unlock/relock bootloader but always says me no recovery image - load fail in error mode

urbanboymne said:
Yes i'm able some recovery images or twrp, also all system.img i can flash withouth problem, cust.img... But nothing change. Somethimes stay in boot black screen, somethimes reboot to ERROR MODE, and also i'm able to get into fastboot mode, unlock/relock bootloader but always says me no recovery image - load fail in error mode
Click to expand...
Click to collapse
same for me after hwota and rebrand fail. And I don't find the STR_stock just 2 STR_recovery but even if android say flash sucessfully i can't acces to recovery nor ercovery.
P.S: I was using OREO rom when I try to rebrand

It can works on Huawei P10 EMUI 8.0.0? How to root that model? I stuck on how to install twrp,. Please help me.....

my system is saying im on 8.0.0.046(0BZC and i can't even get the erecovery or twrp to work at all. nobody around here wants to help or pin point me in any direction either

I have exactly the same problem, but the locations mentioned here don't even exist on my phone, so I can't rename them
10. navigate to /cust/hw/
11. rename "normal" folder to "eu" (without the quotes)
12. navigate to /version/special_cust/STF-L09/hw
cust does not contain a "hw" folder, just a "lost+found" one.
version/special_cust/VTR-L09/hw does exist, but when I try to rename "hw" I get "operation failed".
Very annoying!

I stuck also inside the 8.0.0.046 !
And i dind´t found any solution for this.
This is what i allready tried:
- official eRecovery : download from huawei. But didn´t worked after download. Stucked at 0%
- TWRP oreoupdate ( https://forum.xda-developers.com/p10/how-to/guide-manual-updgrade-to-update-oreo-t3758286 )
- TWRP HuRuUpdate ( https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279/ )
- TWRP HWOTA8 ( https://www.******.com/huawei-hwota-tool-for-huawei-devices/ )
Just to answer my pre-writers:
You need to "mount" the folders "cust" and "version" to see something inside. Only then you are able to change things. In my case this changes
didn´t affect something positive to my version number.
Not sure what i did wrong. Maybe my false was
- Wipe all with TWRP instead with eRecovery
or because
- i flash my (C02) witth (C432) version
So i tried 4x different ways to solve my issue (mostly with TWRP). With no success. If somebody read this, it would be great to get some tips or a complete solution. Would appretiate it.

Okay.
Somehow i found a solution by myself. I have to guess, that the issue is / was of a wrong build nr. In my case i got a previous vers. VTR-L09 8.0.0.382(C02)-FULL. So i updatet to a different build (C432). After
this my Themes disappeared, no file manager and the vers. no. was 8.0.0.046 , somehow. So i tried to go back to VTR-L09 8.0.0.382(C02)-FULL which i downloaded before. Tried both methods: dload, TWRP. No
success. In the end i downloaded VTR-L09 8.0.0.389(C02)-FULL and this worked with the TWRP update method: oreoupdate (check my previous post). After the Update with TWRP before it boots into the
system i was triggering eRecovery to do a "wipe chache / factory reset". Finaly, after all of this, i got a working device as it should ! I hope it can help maybe some people. If everything doesn´t work, just try a different update build number.