Database Develop

[q] need help !!!

i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.

lesithdx said:
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
Click to expand...
Click to collapse
did you have a lagfix enabled beforehand?

no speedmod is the first one

lesithdx said:
no speedmod is the first one
Click to expand...
Click to collapse
not kernel, lagfix. did you enable a lagfix in the speedmod kernel?

yeah i had the rfs converted to ext4

lesithdx said:
yeah i had the rfs converted to ext4
Click to expand...
Click to collapse
then that's what caused it. you should have disable your lagfix before flashing the new rom. i'm not 100% sure on this but i think you need to do a factory reset and reflash and repartion. maybe some more knowledgeable could answer that one though.

Maybe Ur other kernel not support ext4 filesystem.
reflash speedmod kernel and disable lagfix then flash Ur other kernel.

I've had the same problem. The pit file I used was wrong. I was using 513 instead of 512. Try reflashing eclair. And make sure the region is the same.

i disabled the lagfix before flashing the new kernel...anyway guys i got is sorted finally...i repartitioned and flshed XXJPO using odin...thank god it worked...thank you all for caring

lesithdx said:
i used speedmod-kernel-vI1_1-250hz-CWM on my galaxy s gt-i9000 and then i tried to flash it with a different kernel once i did this phone started to hang on the galaxy s screen.after that i flashed it with xxjpo using odin and when it was finished it rebooted to recovery i get the message
update media please wait
E:Can't mount /dev/block/stl10
(invalid argument)
E:copy_dbdata_media:can't mount DBDATA:
your storage not prepared yet,please use UI menu for format and reboot actions.
copy default media content failed
then when i rebooted it from recovery the boot animation appears with the sound then after a while the screen goes blank.then the thing starts vibrating.help me to get this fixed guys.
Click to expand...
Click to collapse
Wipe data/cache

lesithdx said:
i disabled the lagfix before flashing the new kernel...anyway guys i got is sorted finally...i repartitioned and flshed XXJPO using odin...thank god it worked...thank you all for caring
Click to expand...
Click to collapse
I'm in the same boat. Is there any way you can help me?
I've flashed xxjpo using odin but still have the issue.
First, I set up the PIT using 512. Repartition, auto reboot a f restart all checked, the two below, not checked. Connect the phone, run it, disconnect the phone, pull battery, start into download mode again.
Next, I flash the pda with the xxjpo firware from the stock firmwares section here. I unchecked repartition, but left the other two, and I'm back at square one. Is there any way you can walk me through how you got back to a booting OS?

failed to mount /sdcard

sorry to annoy you but my phone went crazy. it keeps rebooting. and when i try to access recovery i get :
e:failed to mount /sdcard (file already exists)
e:copy_dbdata_media:can't mount /sdcard
your storage not prepared yet.please use ui menu for format and reboot actions
meida files copy failed.
installing multi csc
can't access to '/system/csc/nee/system/'.
what must i do?

lol how funny it just happened to me.. when i tried converting system to ext4
i flash 2.1 with re-partition than to JVB custom rom

can u provide me the actual rom, csc, pit, modem u used? cause i tried to flash it. i get only on the recovery to install from sd card. but since my pc don't recognise it cant do more!

try restore your rom
Sent from my GT-I9000 using XDA Premium App

[q] need a help

Hello mate u ok ?
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/201...jw4-value.html
Now i am trying to flash my phone through odin but when its finshed it* my phone shows some erorrs in red* coloures
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
Meida files copy failed
-- Deleting files...
E: failed to mount /dbdata (File exists)
E: delete_data_files: Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
--Updating filesystem...
E: failed to mount /dbdata (File exists)
E: discard_filesystem_for_rfs:Can't mount /dbdata
--Wiping cache...
Formatting /cache...
Cache wipe failed.
--Applying Multi-CSC...
Installing Multi-CSC
Applied the CDC-code 'CPW'
Successfully applied multi-CSC.
i also wipe factorty and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?

hi mate.
your problem is that you're trying to run a gingerbread rom, while you have an ICS/JB bootloader. the two use an entirely different partition scheme, so it's not finding the storage when it tries to access it. it seems to be a common occurrence, lots of people aren't aware that the two differ, when they're even aware that bootloaders exist.
if you look here : http://forum.xda-developers.com/showpost.php?p=37836094&postcount=2 , you'll find the solution i gave someone else that had that problem the other day.

to succesfuly downgrade from cm10 to stock GB you have to flash 3-file ROM with pit512 and re-partition checked.

You posted 2 topics the same
Answered : HERE

OH MY GOD LOL, ANOTHER ONE!
FLASH DBDATA.RFS AS PDA IN ODIN
AAAARRRGGGGHHHH!!!!!
Sent from my GT-I9000 using Tapatalk 2

[Q] HELP! i have an infinite boot loop on my SGS

I tried installing a ROM by factory formatting and cache formatting in CWM and then installing the ROM on install zip from sd card. In 1 second after attempting to install this ROM, CWM crashed and i wasnt able to use CWM again. So after googling how to 'unbrick' my SGS i found some method - flashing a stock ROM using downloading mode (middle button, Volume down, power button) then using ODIN and firmware from Sammobile. I tried this and NOW i get a bootloop and in in Android system recovery <3e>
E:failed to mount /dbdata (Invalid argument)
--Copying media files...
E:failed to mount /dbdata (File exists)
E:copy_dbdata_media:Cant mount /dbdata your storage not prepared yet. please use UI menu for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Appling Multi-CSC...
Installing Multi-CSC
Cant access to '/system/csc/02u/system/'.
Successfully applied multi-CSC
^Thats what i get and now i have no clue about what to do...Any suggestions?

Flash in a file called dbsdata.rfs.tar under PDA in Odin
Sent from my GT-P7510 using Tapatalk HD

Soryuu said:
Flash in a file called dbsdata.rfs.tar under PDA in Odin
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thanks!! Worked first time with no problems! If anyone else has this problem, here is the download file link. And i think ive attached the file on here..
http://mediafire.com/?2o8s8kiqsydstz1

[Q] Tab stuck on Samsung logo

Samsung Galaxy Tab SPH-P100
Carrier: Sprint
Tab is stuck on Samsung boot screen, I am able to go in to download mode, and tried multiple times to do a factory reset but keep Showing up (E:can't open/cache/recovery/last_log)
I tried to flash it with a SPH-P100 Rom but no luck.
Tried putting EA24 modem no luck
Ive been looking but all threads are old can not access links
Any type of help would be appreciated.
Thanks in advanced

probably same as this thread just a few below your.
Have you tried?
Including my post that link to the Mega development thread on Sprint tab, that has a live link of downloads?

priyana said:
probably same as this thread just a few below your.
Have you tried?
Including my post that link to the Mega development thread on Sprint tab, that has a live link of downloads?
Click to expand...
Click to collapse
Thanks for the fast response to tell you the truth I am a noob on android Ive been searching how to fix but can't If I could get a link to instructions and updated files to resolve my problem?
Thank You!!!

This one
http://forum.xda-developers.com/showthread.php?t=2373340
and the thread I linked to near the end before the user got his fixed.

Heeeellpppp
I have this Samsung Galaxy tab GT-p1000 whose applications are getting error message of "force close", I tried to delete all the installed applications, restored factory settings but It doesnt seem to uninstall all the applications, So I decided to
upgrade it from Gingerbread 2.3.6 to ICS after installing it I got an error message of "Encryption Unsuccessful", So tried resetting it, rebooting, wiping factory settings, wiping cache but nothing happened, I even removed the sdcard before rebooting it but still I got the same error message.
I got frustrated and made a stupid mistake, I formatted everything thru recovery mode, format /data, format /sdcard, format /system and all. Yes every possible format. Here comes the problem when I rebooted the system, I only got the "Galaxy Tab, Samsung" screen. I can't enter recovery mode anymore, I can still enter download mode but my pc won't recognize it, so Odin can't recognize it too. What should I do now? HEEEELPPPP pleassseeeee :crying:

If Odin can't recognise it, use a new PC.
Many have done so, even one last week.
Sent from my GT-P1000 using xda app-developers app

priyana said:
This one
http://forum.xda-developers.com/showthread.php?t=2373340
and the thread I linked to near the end before the user got his fixed.
Click to expand...
Click to collapse
I tried the process but after usig the tar file on odin I get this message
--botmode7=7 from cmdline...
E:failed to mount /cache (no such file or directory)
E:can't mount /cache /recovery/comand
--wiping data...
formatting data...
E:formating_volume: rfs format faild on /dev/block/mmcblk0p2
formatting /dbdata...
formatting /cache...
E:format_volume: rfs format failed on /dev/block/mmcblk0p1
data wipe faild.
E:failed to mount /cache (no such file or directory)
E:can't mount /cache/recovery_kernel_log
E:copy_kernel_file :: can't open /cache/recovery/recovery_kernel_log
E:failed to mount /cache (no such file or directory)
E:can't mount /cache /recovery/log
E:can't open /cache /recovery/comand
E:failed to mount /cache (no such file or directory)
E:can't mount /cache /recovery/log
E:can't open /cache /recovery/comand
E:failed to mount /cache (no such file or directory)
Any solution for this after this I try to reboot but The TaB is still bricked.:S
Thanks for your Help.

same comment here as in there.
It is either the partition is screwed up or the NAND chip is bad.
If you did Odin with PIT file and repartition ticked, and didn't come back alive like the other forumer there, then your internal NAND chip is bad.
There are several threads dealing with how to use external SD only and on damaged internal SD.

priyana said:
same comment here as in there.
It is either the partition is screwed up or the NAND chip is bad.
If you did Odin with PIT file and repartition ticked, and didn't come back alive like the other forumer there, then your internal NAND chip is bad.
There are several threads dealing with how to use external SD only and on damaged internal SD.
Click to expand...
Click to collapse
Sir, it seems that this internal chip problem is a huge problem for gtab7 users.. is it better if someone make the tutorial on how to use the external sd to stickies so ppl can notice it? Thanks..
Sent from my Galaxy Nexus using xda app-developers app

There is already one such thread
http://forum.xda-developers.com/showthread.php?t=1463756
Sent from my GT-P1000 using xda app-developers app