Hello
I have Froyo 2.2 I9000JXJPB
I used to be able to connect to PC but not any more. Im using Windows 7 64
I even tried and restored my laptop for factory condition and wiped out my galaxy.
Sometime when I connect the phone with the usb cable and PC would say unrecognized peripheral device and most of the times nothing happenes
it does not help if USB debug is checked or not
I even tried different usb ports in the laptop but nothing work
its driving me crazy
need help please
ok, put the phone in download mode and then connect it, try a USB port that connects direct to the motherboard, usually at the back of the tower.
also if that fails, try to uninstall kies and then re install it, that will re install the drivers.
then post back with the result.
EDIT: just realised your on a laptop not pc
omozali said:
Hello
I have Froyo 2.2 I9000JXJPB
I used to be able to connect to PC but not any more. Im using Windows 7 64
I even tried and restored my laptop for factory condition and wiped out my galaxy.
Sometime when I connect the phone with the usb cable and PC would say unrecognized peripheral device and most of the times nothing happenes
it does not help if USB debug is checked or not
I even tried different usb ports in the laptop but nothing work
its driving me crazy
need help please
Click to expand...
Click to collapse
Download and install these on your pc/laptop , your problem will be fixed
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
Before postig my question I tired uninstalling and reinstalling kies. also tried driver reinstall option from kies
I downloaded the driver separately tried installing several times but it did not help...
Installation always endup with a message Device driver was not successfully installed
Unknown device device unplugged
Unindentified device device unplugged
If i recall correctly my problems maybe was with the last update with kies
if you go into computer > device manager and then select on the 'unidentified driver' you can select uninstall.
then start the process again, and also try installing it for the 2nd time with a different port.
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
musicking said:
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
Click to expand...
Click to collapse
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
xonar_ said:
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
Click to expand...
Click to collapse
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
musicking said:
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
Click to expand...
Click to collapse
You can root your phone from there. If you have SW Update. I recommend taking it into the shop if you are still under warranty, If you don't have warranty then you can go ahead and root. Just install a patched bin and fls with Smart Flash Tool. It's one of the stickies (How to unbrick, I think)
hi
new to Android nation
I have the same issue when connecting to USB...
And I managed to flash with custom firmware (latest ZEUS version) and I rooted but the issue with USB connection is still there...
Anyway, I wiil try connecting it to Linux to check if that would work with USB connecting
UPDATE:
OK after some digging, I managed to (at least temporally) solve the issue... After fresh installing official 2.3.4 firmware I booted to recovery and from there formatted the system folder and then installed Zeus v7 firmware... anyway, USB connection and charging indicator work fine at first booting to system... As soon as I reboot the OS USB connection (and charging) get unstable, and after third reboot it completely goes away and the device does not recognize anything: if I connect USB cable it does not show any sing (charging indicator does not show battery charging, nor the device offers me to connect in mass storage, windows recognizes only modem but not the USB storage) and when I connect charger, battery indicator does not flash as charging... Battery monitor tool shows that "battery is discharging" even though the battery capacity seems to increase (according to growing percentage of battery capacity)... Is there a some kind of USB server... I am a total noob to Androiid OS (used to be Symibian from its beggining )so I hope you won`t mind if I used wrong terms in my explanation/comment...
I hope my explanation is not confusing
Cheers
UPDATE 2:
After installing Zeus v7.01 update, battery charging recognition got fixed using both USB cable and wall charger...
Anyway, USB recognition by PC problem still exists... But when in recovery mode I can successfully mount SD card to PC in Mass storage mode...
Will keep you updated... :victory:
Hello people
I'm new here, in terms of asking questions and seeking help
I have the LG Optimus P970
A few days ago I made the update to ICS, and by proceeding with this page, hackmyandroid.com/optimus-black-p970-official-ics-update/3299
After that, not impossible to connect the phone to a PC, even the software update mode, it can not recognize, anyway to connect it just throws a slow charging.
Is there someone who knows what it is.
I'd love to go back to the old software, but there is no way to detect it pc
Sorry for my bad english
Thanks in advance
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
edzunic said:
I forgot to say, before the update, and my computer still recognize the phone, connecting it over sony usb cable, now it is no longer recognized by the Sony USB cable, and I do not have original LG USB cable.
Perhaps this is the reason why a computer will not recognize the phone
Click to expand...
Click to collapse
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
ferhpsquad said:
Your problem can be the non original cable or........reinstall the drivers and try again
Enviado desde mi LG-P970 usando Tapatalk 2
Click to expand...
Click to collapse
I have the original cable, but still the same problem.
I have all drivers installed, I can transfer files between the phone and the pc, I can use the LG suite,
But I can't see my phone on the ADB console, I can't use smartflashtool cause the phone isn't recoginized.
yesterday I tried with lg cable, and wall charger, in both cases, said slow charging the battery, I tried on three different computers, I tried to reinstall the drivers, like the software blocked communication with the phone, just charge the battery.
If there was a way to put the software through SD card, it might solve the problem.
even the software update mode, the computer does not see the phone
Bro! For the softwaretool like smartflash, You need to boot into download mode i.e., You need to switch off the phone, plug in the USB cable connected to the PC and instantly press the volume up button. Then the tool will recognise Your phone. Try it and check once!
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
edzunic said:
I tried it, nothing happens,
I go to download mode, but computer does not recognize it again
behaves as if the port is destroyed
Click to expand...
Click to collapse
Try to boot your PC with disabled driver signatures, or use a 32bit windows system.
try entering download-mode the following way:
disconnect your phone from pc
remove battery
press and hold Vol-up
connect the usb-cable (still without battery)
Now the phone should be detected as a serial-cable device an you can use the smart flash tool.
would have to be sound,
no sound when I connect the phone to the PC
Solved my problem.
Seems like windows automatically installs driver to the phone, but it partially works.
Unistall all drivers for the phone, or try on a new computer.
Plug the phone and cancel the driver search by windows
Install drivers for LG (unplug the phone before)
Turn it off
Plug the cable and enter download mode
And there is the phone recognized on smartflashtool.
I'm flashing a new one right now, thank you.
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
edzunic said:
You do not understand the problem
there's no sign, no sound when I connect the phone to a computer, any computer, drivers were or were not.
As if something in the phone blocked communication between the PC and phone
Click to expand...
Click to collapse
I got same problem.
bollix said:
I got same problem.
Click to expand...
Click to collapse
add me!
Connection Problem with Mackay 2.999
Hey Guys,
first of all, sorry for my not so good English
I'am at Mackay 2.999 with last Kernel of his build and can't connect the Phone to the Computer.
It only install the LGE Mobile Composite USB Device, the LGE Mobile USB Serial Port and the LGE Mobile USB Modem on connecting to the Workstation.
I had test it on many Computers but the Problem is all the same: I can't get on my Memory or ADB.
I also had testet all modes under the setting point (MTP/PTP/mass storage device) and with debbuging on and off.
On my Workstation is the Last Version of ADB (1.0.31) installed.
Did anyone know the problem?
Did no one know a result to this problem
Hmmm my PC also can't read my storage what I did is go to cwm and plugged in usb cable and pressed mount storage it seems to solve my problem. I also did a cache and dalvik cache wipe.
Hey, I have found the result to this problem. You must flash another Baseband. Use from Nooby the V30 Baseband and it is solved.
Gruß Ernst
via Tapatalk 2
but how to flash, when can´t connect to pc
lg optimus
hi frendz ,
please help me out
i'm using lg optimus p970..last night my phone memory get full and mobile get turn off ..now it wont turn on even battery is fully charged...only LG logo shows nithing else...
Hy guys , i have the same problem . I updated to 4.4.2 Nameless ROM and i can't connect my phone to pc . The only action that it's done : charging the phone and that's all . I tried connecting to another pc but with no result . An error appeared :" LGE USB Device - No driver found " .Before 4.4.2 i had 4.1.2 from CyanogenMod and with that ROM i had no problem connecting the phone to the pc . Any help ?
So installed the dual boot recovery. I have it on my phone along with superuser and now my computer wont recognize the phone. Sorry to post so many threads but i need to get post amount up to 10. This locked bootlaoder stuff is weird going from clockwork mod on my g1, g2x. Thanks for all help.
bump
tristan582 said:
bump
Click to expand...
Click to collapse
installing a recovery shouldn't stop the computer from recognising the device, where to is it being failed to recognise? flashtool? usb storage? have you tried removing the drivers from device manager and reinstalling them? have you tried a different usb cable? different usb port?
So the phone is never recognized if I just plug the phone into the computer. No charging light, doesn't show up on computer. Tried 3 different cables and many usb ports that i know work. I have windows 8 so It almost always auto detects hardware and auto installs drivers. I deleted it from hardware and printers and downloaded the sony zperia z driver for windows 8 and it s a zip file. I tried extracting it and it only opens up as a bunch of random files. NO application. I have only installed the XZ dual boot recovery and root with restore v33. It only charges sometimes if I plug it in and reboot it. But it still doesn't show up as a device on my computer.
So when i plug in the phone and reboot it charges the phone and says usb debugging but my computer doesn't show the phone.
I also have ubuntu imstalled on my computer (dual boot) and it doesn't reconize the device in ubunutu either. And when trying to use any of the flash tools it says device not found or connect device.
I got my new T-Mobile LG G6 today. I am unable to connect the same to my PC (Windows 8.1),
In the phone I am able to set the USB Debugging ON before connecting to PC. But once I connect the
phone to PC through the supplied USB cable the USB Debugging becomes greyed out and the PC is
unable to recognise the phone. I have change the USB ports and tried. Any help please ?
tupuluruk said:
I got my new T-Mobile LG G6 today. I am unable to connect the same to my PC (Windows 8.1),
In the phone I am able to set the USB Debugging ON before connecting to PC. But once I connect the
phone to PC through the supplied USB cable the USB Debugging becomes greyed out and the PC is
unable to recognise the phone. I have change the USB ports and tried. Any help please ?
Click to expand...
Click to collapse
Try to either to use USB 2.0 type C cable or to update the Unified driver to 4.2.0 (add USB 3.1 support)
Install Windows 7 or 10. Install lg mobile driver. Plug in phone.
Did you install drivers?
Go to device manager and find your phone and uninstall it. Reboot. Plug in phone let driver install
Looks like only it's genuine usb 3.1 cable it's working for file transfer with PC!
ovu85 said:
Looks like only it's genuine usb 3.1 cable it's working for file transfer with PC!
Click to expand...
Click to collapse
cable and quick charge adapter of samsung is working great with my G6 T-Mobile.
For me personally the stock cable is the only one that allows me full USB functionality