Database Develop

Phone restarting after flashing to Stock GB ROM

Apologies, but since I am a new user, I was not allowed to post in the thread in developer section.
I had bought a pre owned phone, on Rocket ROM (GB based), however as S-Pen apps were not working I decided to go on the stock ICS rooted way.
I followed the instructions here:
http://forum.xda-developers.com/showthread.php?t=1424997
I had downloaded the stock INdian ROM
N7000XXKK3 ------ 2.3.5 2011 November------ N7000ODDKK1 ------------------------India -------------------------Download
Click to expand...
Click to collapse
I followed the steps, downloaded Odin, and put the TAR file in PDA section, and flashed. All goes fine without error, on the phone it says everything is installed successfully. However after the process the phone just keeps restarting after the Samsung logo.
Have I done anything wrong here? How do I rectify the mistake and get my phone working

Did you clear cache/dalvik or do a wipe in recovery menu ? Looks like it's stuck because of leftover data from previous rom

Akiainavas said:
Did you clear cache/dalvik or do a wipe in recovery menu ? Looks like it's stuck because of leftover data from previous rom
Click to expand...
Click to collapse
Umm, pardon my ignorance as I am migrating from an ancient Nokia device.
No, I had done no such thing, no backups too as I just had it for a few days and no data so to speak of.
Should I be doing a wipe in recovery menu? And doesn't flashing the device, formats the memory too?

I think it should, but for some reasons it does not. To get rid of boot loop, go into recovery and clear cache. Should boot properly then
Also, avoid doing a factory reset on stock ics. If clearing cache wont help, i'd suggest flashing gb stock rom, doing a wipe and then upgrading to ics as wiping under ics has caused people a lot of troubles.

Yes you should do a wipe of cache memory and dalvik cache. That is availible from recovery menu. And no they arent allways formatted when flashing a new rom.
To go into recovery, do this.
Device off > vol-up+home+power. And now you are in recovery mode.

Also, avoid doing a factory reset on stock ics. If clearing cache wont help, i'd suggest flashing gb stock rom, doing a wipe and then upgrading to ics as wiping under ics has caused people a lot of troubles.
Click to expand...
Click to collapse
Thanks, I had read up how much ever I could, and am pretty wary of the emmc bug. Thats the reason I am flashing to a GB based stock rom, and then the ICS stock rom.
The error I got earlier is by flashing to a Indian GB Stock ROM, should I yet clear cache memory in the recovery mode?
A little bit of googling tells me I should be flashing to a ROM with multiple files (different ones for PDA, Modem, CSC etc) hence I am also downloading the stock Europe based ROM. Now the query is would the stock Europe GB ROM, cause any issues to a Note bought in India?
Edit: I wiped the cache partition in recovery mode, but the bootloop persists. I will try flashing to the Europe GB ROM and update.

Thanks, folks was able to install the Europe stock GB ROM, which I later flashed to an Indian stock ICS ROM. I have rooted the phone by a very helpful guide by Dr Ketan, however I miss some of the functions available to me on the rocket GB based ROM. Especially an option to have a data on/off option in quick notifications.
What is the purpose of rooting the stock ROM? Can I delete the bloatware that comes pre-installed on the stock ROM, once the phone is rooted? If yes how?
Any safe custom ICS ROM's you guys recommend? If I am right the correct way right now seems to be to flash a safe GB based ROM everytime before you flash an ICS ROM? Correct?
Last but not the least, thanks to the folks who replied and guided me in the thread, XDA is a very resourceful place, if you search it thoroughly.

About notification toggles - they are available in some roms, in others - not.
As far as rooting is concerned - yes, you can delete almost all the bloatware. There is a thread with APKs that are safe to remove - check it out and feel free to delete everything you won't be using. How ? Simple file explorer with root capabilities will do. Here's the list, thanks to pulser_g2:
https://spreadsheets.google.com/spr...1gdDJRekl4QmkyNmIzUmRvX2h3UDVkQXc&output=html
Safe custom ICS ROMs - I'd say go for CM9. For me, AOSP is the only way to go with Android. If you want TouchWiz based roms, however, can't really help cause i've never used them - there are plenty in development section though.
Nope, you don't need to flash GB ROM everytime. The problem with wipe affects only stock ICS roms ( so with stock-kernel based roms from Samsung, yeah, that's recommended ). But if you're going to flash/change/update roms like CM9, Criskelo etc. there is no need to go back to GB everytime.

Hi i was on ICS stunner and flash via PC Odin Stock GB rom.
everything goes ok but now i'm stuck on Samsung logo (bootloop)
i have to do cache/dalvik wip but i have only stock recovery.
Is there any way to do that on stock recovery or i have to flash a CWM instead ?
And if i have to so how to do that ?
help guys

arturutrata91 said:
Hi i was on ICS stunner and flash via PC Odin Stock GB rom.
everything goes ok but now i'm stuck on Samsung logo (bootloop)
i have to do cache/dalvik wip but i have only stock recovery.
Is there any way to do that on stock recovery or i have to flash a CWM instead ?
And if i have to so how to do that ?
help guys
Click to expand...
Click to collapse
Download abyss from the following site:
http://downloadandroidrom.com/file/...rnel/AbyssNotekernel42CWTouchOriginalLogo.tar
Flash the file with PC odin then reboot into abyss recovery. You can then do the wipe.
If you need more information, go to this website:
http://rootgalaxynote.com/galaxy-note-root/how-to-root-galaxy-note-gt-n7000-method-2odinheimdall/

[Q] abnormal error, can anyone help me?

Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.

Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.

hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.

salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.

I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .

I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.

salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2

[Q] Flashing procedure

Hello,
I'm new at flashing but I recently bought a Samsung Galaxy Note, which already had Stock ICS on it.
Android Version: 4.0.3
Baseband: N7000XXLPT
Kernel: 3.0.15-N7000XXLPY-CL474507
Got brickbug confirmed that I am running a dangerous eMMC chip firmware. I bought this Note from eBay and I'm guessing the previous owner did a reset. It is still working and I had no trouble with it, so I guess I got lucky.
Since I would like to return to a safer kernel and install Paranoid Android I read myself into some threads but would like someone to review what I've gatherd:
Flash save kernel for ICS, for example speedmod kernel with PC Odin.
Device should reboot into ICS with new kernel.
Flash Gingerbread stock ROM for my country (germany) for example this one:
N7000XXKJ4 ------ 2.3.5 2011 october-------- N7000OXAKJ4 ------------------Germany (Debitel)
Device should restart wirh Gingerbread and an old Gingerbread kernel(?)
Root and install CWM using Dr. Ketans guide and batch file.
Follow instructions to install Paranoid Android v0.4 from CWM
I have some questions for this as well:
Speedmod kernel flashes CWM with it. Does that mean it flashes the kernel and the recovery partion, too? As I understood, the CWM works from inside the initramfs, which I thought got flashed with the kernel on the /system partion (or maybe the /boot partion) but not on the /recovery.
Does CWM disapear, when I flash another ROM?
I am pretty sure, that I am running a free (= open) Version of ICS on the phone. When I install a Stock Gingerbread ROM with a Carrier afterwards (like above the Debitel company), do I have to expect weired stuff?
I am running Win 7 64bit, and I would run Odin v1.85 with admin rights. Kies ist installed. Odin found the device, too.
Thanks in advance,
gador

Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.

azzledazzle said:
Speedmod Kernel will install Kernel, CWM and Root - And is flashable via odin or mobile odin.
CWM will disappear if you flash a stock ROM via ODIN, If you flash a custom ROM through CWM you will keep CWM (may change depending on kernel from the ROM)
If you flash a branded ROM via odin, You will probably get a lot of carrier branded bloatware on the device, But if you are sim unlocked, you wont get any weird issues like network unlock codes and so on.
Click to expand...
Click to collapse
So I guess, I can go ahead and they're no fatal flaws in my procedure?
(And flashing stock ROMS overrides /recovery as well?)

Check the videos in ky sig once
Just to be safe

Erm, All ROMs are different so double check in the OP but you wont lose CWM if you switch between custom ROMs, Only a full firmware flash via ODIN will replace recovery. However there are many variations of CWM, All however do the same job
the instructions above are correct, But seem to be a more complicated way of doing it, It says to flash a safe ICS kernel, THEN flash GB ROM in ODIN ??? That makes no sense.
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !

azzledazzle said:
Anyway, What i would do is, Revert to GB via ODIN, Flash SpeedMod kernel (for GB not ICS), Load all the files on to your SD card, Boot into recovery, Do a full wipe, Along with cache and dalvik cache, Then install PA + Gapps + any other mods !
Click to expand...
Click to collapse
would it then be necessary at all to install the SpeedMod kernel? I included it above to make sure, the kernel is safe, but when the Gingerbread Stock ROM overrides the kernel, do I have to flash the kernel afterwards?

I suggest you stay stock and dont do any factory reset or data wipe.
Then READ and read a LOT of the topics here.
All these suggestions of flashing this and that comes with a risk. And it does not mean that if it works for others will work the same way for you.
Sent from my GT-N7000 using xda app-developers app

Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN

azzledazzle said:
Yes, thats why i thought the above steps where a bit confusing lol
Flash SpeedMod (or any other GB kernel for that matter) After flashing GB via ODIN
Click to expand...
Click to collapse
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2

mrcarlxx said:
Does one need root before you are able to flash GB via PC Odin?
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I'd say no. I mean, as I understand it, you're flashing the device in download mode. There is no need for a root user.

So, against my inner "good angel", who told me to wait for a new official firmware release, I went ahead and flashed away.
It all worked and here is what I did:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restarted and got lots of force close issues.
Flashed the Gingerbread Kernel SpeedMod from here ("speedmod-kernel-n7000-k2-12-Odin.tar")
Rebooted, continued to have force close issues.
Rebooted into Recovery (which is now CWM, due to Kernel update)
Wiped cache, dalvik cache and did a factory reset
Rebooted into a fully working Gingerbread OS
Placed PA v0.4 and GApps onto my SD Card (from here)
Rebooted into CWM Recovery
Applied PA v0.4 from SD-Card
Applied GApps from SD-Card
Wiped Dalvik Cache, Cache and did a factory reset
Rebooted into a workind Paranoid Android OS.
Although the SpeedMod Kernel got overridden by PA, I still have CWM Recovery.

Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(

mrcarlxx said:
Did you root first? and did you get the yellow triangle through flashing with PC Odin?
PS
I'm still dead scared about flashing a ROM after messing up my last gnote, never ever had a problem with my desire...it's shook my confidence tbh :-(
Click to expand...
Click to collapse
Well, the SpeedMod Kernel not only gave me CWM, but also root. According to PA Thread Install instructions, you would need to root your device prior to installing PA.
Yes, after flashing the SpeedMod Kernel, I got the yellow triangle, but since I bought this phone on eBay, without any bill to confirm warranty, I didn't really care about it.
I did not get a yellow triangle after flashing the official Stock ROM!
So I would hazzard to guess that this would not void warrany. (Also, in Download Mode, there was the little text saying: "Custom Binary: No" after flashing the Stock Gingerbread ROM)
So, if I were concerned about warrany, I would have a second look at Dr. Ketans guide, which describes the CWM+Root procedure without increasing the binary counter (at least I think so).
This way, you could get root and CWM after flashing to Stock Gingerbread.
I just had the problem, that Gingerbread wouldn't allow me to go into the Settings Tab to activate Debbuging, which you will need for Dr. Ketans method. (All processes were getting force closed)
If it is possible to wipe the caches and factory reset the phone with stock recovery, I think it would work. It should look like this then:
Flashed the Gingerbread Stock firmware from above with PC Odin, according to the guide in the second post of the Stock Firmware thread.
Restart to Recovery. Wipe Dalvik Cache, Cache and do a factory reset (You just flashed Gingerbread Stock, which should have given you a safer kernel)
Restart
Activate USB Debugging and untrusted sources.
Follow Dr. Ketans Guide on how to Root+ get CWM
Continue from step 8 above.
Since I consider myself a complete noob to the flashing business, someone should propably confirm, what I've just written. I wanted to be on the safe side and therefore flashed a known safe kernel again over Gingerbread, just to be sure (and to get root+CWM)
Hope that helped.

Well mine didn't :-(
I'm now cursing after my planned upgrade failed :-( I'm stuck at the yellow triangle boot screen wondering what to do
My sequence was
a) Unpack SGN, and it upgraded to ICS
b) read about all the dire warnings on ICS - and curse!
c) figure out how to flash speedmod and get root via the temp CWM - and I was pretty happy about this for a few days..
d) battery life seemed poor - so I wondered if the Abyss kernel would help
e) Went into Recovery - which appeared to be CWM (volume & on/off to navigate) and flashed the Abyss kernel and performed a wipe (assured that my SGN was safe with speedmod)
f) Now stuck at the yellow triangle boot screen - wondering what to do?
My recovery seems to be the touch screen version now - when I can get into it.
Suggestions please?
(My old nexus One wasn't this tricky!)
---------- Post added at 10:25 PM ---------- Previous post was at 10:02 PM ----------
Wll I reflashed speedmod with Odin - and at least it looks like its booting!... anxious minutes later.... well I/m back. I don't know what i did wrong - but |I don't want to repeat that in a hurry.
I'll wait for CM9 to come out with an approved kernel before messing further!

[Q] JB to GB downgrade failure?

So, this is what happened. I first upgraded to the latest official JB 4.1.2 XXLSA firmware. I noticed that it still wasn't as fast as I'd like, and wanted to try a custom ROM instead. I read through the guides in here and get that I have to downgrade to a GB ROM first in order for me not to hardbrick my phone. So, I download "N7000XBKK4 ------ 2.3.6 2011 November------- N7000OXXKK5--------------------- Nordic countries" from that list over stock ROM's in the Q&A root guide here: http://forum.xda-developers.com/showthread.php?t=1424997 . I follow the flashing guide to the letter, puts my phone in download mode, runs the flash via Odin, the phone restarts, and everything goes south. Basically this happens: When I start my phone it get's to the point in the GB initial startup where I'm to touch the Android to start, but then all it does is throw messages at me about this service and that service having stopped responding, untill the phone reboots. So now I have reflashed back to the JB ROM.
So basically, what am I doing wrong, and what can I do to make a proper downgrade so I can get rooted, install CWM and get down and get it on with some custom ROM's?
Thx in advance!

Same happened with me. I flashed GB and was getting force close messages. But not a big problem. Just flash GB rom again. And after flashing just delete all user data from recovery and reboot. U wont get those messages any more.
Sent from my GT-N7000 using XDA Premium HD app

You always need to WIPE data / factory reset after downgrading from JB .. GB is safe to go ahead.. if you choose ICS then first flash a safe kernel and then do wipe

It seems to me that KK5 is non wipe, which explains why you got those messages. The rest is detailed in nokiamodeln91's message BTW, JB is still not official for our Notes. What you installed was a leak with a safe kernel (if it was Philz).

nokiamodeln91 said:
You always need to WIPE data / factory reset after downgrading from JB .. GB is safe to go ahead.. if you choose ICS then first flash a safe kernel and then do wipe
Click to expand...
Click to collapse
Stock GB kernel its safe and Stock ICS Unsafe?

Yiannis75 said:
Stock GB kernel its safe and Stock ICS Unsafe?
Click to expand...
Click to collapse
Exactly.

I had this issue too when downgrading to GB. Wipe Cache and Dalvik and you should be ok from then on.

Wow. A lot of replies in just a single day. You guys are awesome
Now you say that the KK5 is non-wipe. Are there any GB-roms which are wipe, so to speak? Or do I have to do the flash to GB, enter recovery, wipe cache partition and do wipe/factory reset, then reboot into a now working phone, set up for root with USB and so forth, root and install CWM, copy the custom ROM to my SD-card (gonna go for ParanoidAndroid) as well as Google services if I want those, and then install them via CWM/Mobile Odin?

Godofmosquitos said:
Wow. A lot of replies in just a single day. You guys are awesome
Now you say that the KK5 is non-wipe. Are there any GB-roms which are wipe, so to speak? Or do I have to do the flash to GB, enter recovery, wipe cache partition and do wipe/factory reset, then reboot into a now working phone, set up for root with USB and so forth, root and install CWM, copy the custom ROM to my SD-card (gonna go for ParanoidAndroid) as well as Google services if I want those, and then install them via CWM/Mobile Odin?
Click to expand...
Click to collapse
GB LC1 is wipe. But if you want PA (which is an excellent choice) just flash a CM10 kernel in your recovery (if your recovery is safe, like GB for example). Then follow Utacka's instructions for the installation.

But if I want CWM I should do root and install CWM there? And then flash the custom ROM from CWM?

Godofmosquitos said:
But if I want CWM I should do root and install CWM there? And then flash the custom ROM from CWM?
Click to expand...
Click to collapse
The CM10 kernel comes with its own recovery where you can flash from. If you have root issues, just flash CWM-SuperSU-v0.99.zip. In any case don't flash from stock ICS with CMW.zip: if you are on ICS and not rooted flash the relevant Philz kernel (which is safe and will give you root and CWM) then the CM10 kernel.
Edit: what ROM do you have now?

I use the 4.1.2 XXLSA ROM
Btw, anyone knows where I can download the Google Services Framework so I can install it alongside Paranoid Android? I have been led to believe it's not included as per default
Thx for all the replies!!

If you have downloaded the xxlsa rom then it's inside the rom zip file. Path system/app/GoogleServicesFramework

nokiamodeln91 said:
If you have downloaded the xxlsa rom then it's inside the rom zip file. Path system/app/GoogleServicesFramework
Click to expand...
Click to collapse
Hmmm. not that I can see. Even tried unpacking the .tar files. Can't find it :/
Edit: Ah, found it Thx for all the help

[Q] stuck in update loop

my 1st post here .. hi all :silly:
my n7000 was flashed to ( N7000JPLSB N7000OJPLSA - United Arab Emirates ) 2 months ago and i used a phil's kernel and rooted the device .. device worked good 2 months later a system update popped in and i pressed ok .
now device stuck at boot loop at the android robot .. i removed the battery so it isnt derained .. once i put the battery back and try to charge the battery the device enters the loop again
any help well be appreciated

mustafa811 said:
my 1st post here .. hi all :silly:
my n7000 was flashed to ( N7000JPLSB N7000OJPLSA - United Arab Emirates ) 2 months ago and i used a phil's kernel and rooted the device .. device worked good 2 months later a system update popped in and i pressed ok .
now device stuck at boot loop at the android robot .. i removed the battery so it isnt derained .. once i put the battery back and try to charge the battery the device enters the loop again
any help well be appreciated
Click to expand...
Click to collapse
Weird you got an update when you were running a custom kernel. Anyways, go into recovery, plug your phone into your computer and copy other Philz kernel for... JPLSB. Flash it, reboot. Do the following wipes: data factory reset, cache, dalvik, /system /preload. Once that is done just reflash again with Odin. You will loos all of your data. This will take you to complete stock - no customs kernel. If you want root again then you will have to download Philz kernel.

XxPixX said:
Weird you got an update when you were running a custom kernel. Anyways, go into recovery, plug your phone into your computer and copy other Philz kernel for... JPLSB. Flash it, reboot. Do the following wipes: data factory reset, cache, dalvik, /system /preload. Once that is done just reflash again with Odin. You will loos all of your data. This will take you to complete stock - no customs kernel. If you want root again then you will have to download Philz kernel.
Click to expand...
Click to collapse
it is a stock rom not custom but with philz kernel for the root

Philz kernel is well custom kernel, not stock kernel.
When a stock ROM having root, normally it doesn't receive any more automatic update from Samsung.
You'd better follow hints from XxPixX.

qnt said:
Philz kernel is well custom kernel, not stock kernel.
When a stock ROM having root, normally it doesn't receive any more automatic update from Samsung.
You'd better follow hints from XxPixX.
Click to expand...
Click to collapse
it is a stock rom with stock kernel but to root the galaxy note i read that flashing or wiping might cause a brick
on a stock kernel soooooooo usually after flashing the stock rom and before rooting i flash a safe kernel
i used odin in download mode and flashed the same stock firmware and surprise the device returned to its pre-brick
state exactly with all my contacts and all apps but root and kernel gone
so i am gonna root it now after installing safe kernel
thx all

qnt said:
Philz kernel is well custom kernel, not stock kernel.
When a stock ROM having root, normally it doesn't receive any more automatic update from Samsung.
You'd better follow hints from XxPixX.
Click to expand...
Click to collapse
Stock rom on any kernel will receive updates but will not be able to install it as it needs stock recovery. Notification of new update will come.

nokiamodeln91 said:
Stock rom on any kernel will receive updates but will not be able to install it as it needs stock recovery. Notification of new update will come.
Click to expand...
Click to collapse
Thanks for that info on stock recovery need to update.

had the issue too with some custom roms i use jonrom 4.1.2 LT4 custom rom now and everything is working well

So, re-flashing the ROM is the final answer..
Be it stock or custom ROM..