So question is how to downgrade to 4.0.4 or 4.1.1. from Mexico 4.1.2 firmware.
When flashing with RSD lite i see error gpt
Can anyone help with this?
xxfOxx said:
So question is how to downgrade to 4.0.4 or 4.1.1. from Mexico 4.1.2 firmware.
When flashing with RSD lite i see error gpt
Can anyone help with this?
Click to expand...
Click to collapse
unless your boot loader is unlocked, I don't think you will be able to. Do you already have root? At least that is the case with the american firmware, I am not sure how the Mexico firmware differs.
timistim said:
unless your boot loader is unlocked, I don't think you will be able to. Do you already have root? At least that is the case with the american firmware, I am not sure how the Mexico firmware differs.
Click to expand...
Click to collapse
i have unlocked bootloader and root, I don't know why this error shown, probably at mexico 4.1.2 bootloader have higher boot version or something like this
You will have to follow the instructions on skeevydudes how to post. Install the ICS or JB fastboot per his instructions and you'll be downgraded. I did this from MR 4.1.2 last night to ATT 4.0.4. ICS booted fine however I still was unable to RSD any other version other then MR 4.1.2
Sent from my MB886
but how i can flash stock firmware if RSD cannot flash?
xxfOxx said:
but how i can flash stock firmware if RSD cannot flash?
Click to expand...
Click to collapse
Fastboot
Why would you unlock your bootloader if you don't know how to flash anything with it?
sorry, i don't know that it's possible to flash stock firmware from fastboot. RSD doesn't flash stock att (4.1.1) to atrix hd with mexico (4.1.2)
can you post steps how to flash using fastboot?
Markyzz said:
Fastboot
Why would you unlock your bootloader if you don't know how to flash anything with it?
Click to expand...
Click to collapse
Because you can learn. You can know what flashing is and want it without knowing the exact steps.
Sent from my MB886 using xda app-developers app
so anyone can post here how-to to flash att 4.1.1 stock firmware to atrix hd with unlocked bootloader with mexico 4.1.2 ? It's real ?
xxfOxx said:
so anyone can post here how-to to flash att 4.1.1 stock firmware to atrix hd with unlocked bootloader with mexico 4.1.2 ? It's real ?
Click to expand...
Click to collapse
So are you trying to flash the stock firmware or the mexico retail one?
I have atrix hd att, and flash it with mexico firmware, but i don't know how i can return to stock att firmware if i need.
I try to reflash with RSD but its fail
http://forum.xda-developers.com/showthread.php?t=2226527
(HOW TO)(Unlocked Bootloaders)Install Fastboots, CWM, Tips & Ticks, and More
Sent from my Atrix HD
First post by skeevy. Download the ICS Fastboot files or the 4.1.1 files and follow the instructions.
And it will be updated toboriginal jelly bean?
Sent from my MB886 using xda app-developers app
FLaMpeR said:
And it will be updated toboriginal jelly bean?
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
Using our tool seems easier: http://forum.xda-developers.com/showthread.php?t=2262726
xxfOxx said:
I have atrix hd att, and flash it with mexico firmware, but i don't know how i can return to stock att firmware if i need.
I try to reflash with RSD but its fail
Click to expand...
Click to collapse
Hello brothers, I also try to flash 4.1.2 and I have retail mexican brick, please confirm me whether the error "security downgrade version" can be solved? I currently I have the same problem. Thanks for the help.
kdrumwork said:
Hello brothers, I also try to flash 4.1.2 and I have retail mexican brick, please confirm me whether the error "security downgrade version" can be solved? I currently I have the same problem. Thanks for the help.
Click to expand...
Click to collapse
Boot loader unlocked? Rooted? Use myth tools and tell us the steps your taking one by one.
Sent from my MB886 using xda premium
Related
Hello Guys, i purchased a BELL ATRIX HD in Halifax Canada this week and brought it to germany. right now it has
System 77.55.18.MB886.BellMobility.En.CA on it 4.04 Flex GAS_NA_DINAICSBELL_P014 on it.
Can anyone help me with an AT&T ROM? BELL has only english spanish french and portuguese language on it...
i couldn`t find any ROM for it and it is dated JUNE 2012, and i would like to try out the AT&T ROM
would appreciate the help, have a great weekend
thanks
alex
AT&T has the same 4 languages
w0hnzimmer said:
Hello Guys, i purchased a BELL ATRIX HD in Halifax Canada this week and brought it to germany. right now it has
System 77.55.18.MB886.BellMobility.En.CA on it 4.04 Flex GAS_NA_DINAICSBELL_P014 on it.
Can anyone help me with an AT&T ROM? BELL has only english spanish french and portuguese language on it...
i couldn`t find any ROM for it and it is dated JUNE 2012, and i would like to try out the AT&T ROM
would appreciate the help, have a great weekend
thanks
alex
Click to expand...
Click to collapse
No, don't! You are not supposed to install AT&T ROM on the Bell model. You will brick your phone.
Blue Bell said:
No, don't! You are not supposed to install AT&T ROM on the Bell model. You will brick your phone.
Click to expand...
Click to collapse
Not true depending on if his bootloader is unlocked or not....
Bootloader
SirHoover2010 said:
Not true depending on if his bootloader is unlocked or not....
Click to expand...
Click to collapse
Sorry im a newbie, how can i find out, language doesnt matter, but with bell i cannot put my apn for foreign data plan
SirHoover2010 said:
Not true depending on if his bootloader is unlocked or not....
Click to expand...
Click to collapse
I thought none of the retail Atrix HDs have unlocked bootloader yet?
Blue Bell said:
I thought none of the retail Atrix HDs have unlocked bootloader yet?
Click to expand...
Click to collapse
I have heard some Bell units have been unlocked. Not sure now that you said that though lol
i havent seen a confirmation on this yet , "Device is UNLOCKED, Status Code:1" at fastboot ,means bootloader unlocked ?
if yes ,how can I flash at$t roms ,since I already tried Hd utility and it doesnt work . using ss3?
Download the at&t fxz files
Download fast boot
If and only if your boot loader is unlocked use fastboot
Sent from my MB886 using xda app-developers app
gabo_e30 said:
Download the at&t fxz files
Download fast boot
If and only if your boot loader is unlocked use fastboot
Sent from my MB886 using xda app-developers app
Click to expand...
Click to collapse
thanks, will try to unlock, got root already...have a nice day
still LOCKED, hope to get help with the unlock
regards
Cooltobe,
Yes "device is UNLOCKED:status code 1" means ur BL is unlocked.
To flash at&t files try my step by step guide in the general section. Ask if u have questions please.
Sent from my MB886 using xda app-developers app
When I use odin to flash my phone with XXLPY and XXLQ4 rom , it just say fail when it goes to the Modem part . How can I solve the problem ?
Please help !
Baseband : ZSLK3
My phone has the same baseband as you. What I have found is that if I flash the roms(both 2.3 and 4.1.2) in this forum, I will either failed in modem part or both baseband and imei unknown. I suppose we can only flash roms which is based on roms named ZSXXX.
Still, you can flash kernels.
So you mean that we can only wait for the Samsung official release to upgrade to andeoid 4.1.2. Is that right?
Sent from my GT-I9070 using xda app-developers app
arthurkwan15 said:
So you mean that we can only wait for the Samsung official release to upgrade to andeoid 4.1.2. Is that right?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
try to XXLQB and odin v3 3.7 and it;s work for all region like me i am from india and work
stop kies for task manager and stop all antivirus then try:good:
Do your imei and baseband become unknown after upgrade to 4.1.2 ?
arthurkwan15 said:
Do your imei and baseband become unknown after upgrade to 4.1.2 ?
Click to expand...
Click to collapse
no i not lose my imei and baseband after upgrade 2.3 to 4.1 on this F W LQB
and this more http://forum.xda-developers.com/showthread.php?t=1842456
If I lose my imei or baseband , can I get back by putting the original EFS folder back using root explorer?
arthurkwan15 said:
If I lose my imei or baseband , can I get back by putting the original EFS folder back using root explorer?
Click to expand...
Click to collapse
i am not dav but i think yes
Still it just says fail when it goes to modem part. What should I do ?
arthurkwan15 said:
Still it just says fail when it goes to modem part. What should I do ?
Click to expand...
Click to collapse
hmm.
is your phone sim-locked to your carrier by any chance?
maybe that is why modem is failing if you try ROM from different carrier / unbranded.
th3cr0w said:
hmm.
is your phone sim-locked to your carrier by any chance?
maybe that is why modem is failing if you try ROM from different carrier / unbranded.
Click to expand...
Click to collapse
Then what should I do ?
Sent from my GT-I9070 using xda app-developers app
arthurkwan15 said:
Then what should I do ?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Unlock your phone for all carriers
Sent from my GT-I9070
frzek said:
Unlock your phone for all carriers
Sent from my GT-I9070
Click to expand...
Click to collapse
I don't know if this is the explanation. My SIM is locked to Vodafone network. I had installed all custom ROM's on GB 2.3.6, I installed JB XXLPY, XXLPZ, XXLQ4 and now XXLQB. I installed almost all JB themed ROM. I had no problem that the SIM card is locked on carrier network.
I know there were problems with SIM locked to T-Mobile.
arthurkwan15 said:
Then what should I do ?
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
try to redownload the firmware that you like to flash..
maybe you have a corrupted file..
disable kies and anti virus programs..
these may hinder the whole update processes..
---------- Post added at 08:33 PM ---------- Previous post was at 08:28 PM ----------
mathei said:
I don't know if this is the explanation. My SIM is locked to Vodafone network. I had installed all custom ROM's on GB 2.3.6, I installed JB XXLPY, XXLPZ, XXLQ4 and now XXLQB. I installed almost all JB themed ROM. I had no problem that the SIM card is locked on carrier network.
I know there were problems with SIM locked to T-Mobile.
Click to expand...
Click to collapse
youre phone is sim-locked right?..
installing firmwares for JB was always been successful..
Original posted by jaycm1130:
youre phone is sim-locked right?..installing firmwares for JB was always been successful..
Click to expand...
Click to collapse
I installed all JB smoothly. And the SIM card is still blocked in the network. :laugh:
mathei said:
Original posted by jaycm1130:
I installed all JB smoothly. And the SIM card is still blocked in the network. :laugh:
Click to expand...
Click to collapse
im investigating why some sgs advance users end up in a baseband XXXX or imei Unknown..
that is why i ask you coz your on sim-locked..
there was a thread that i've read that maybe because their phones were locked by their carrier..
Anyone try to downgrade from the kitkat OTA yet? Verizon can so I'm wondering if the T-Mobile folks can.
Sent from my XT1058 using Tapatalk
for what i know as long as you have a unlockable bootloader, you should be able to.
if not, then gg
Is it as simple as downloading the 4.2.2 for your carrier, extracting, and flashing recovery/boot/system? (from sbf-droid)
I've got the 4.4 update w modem and hlos and all that crap. (the leaked 4.4)
You dont need to downgrade to install OTA, check here http://forum.xda-developers.com/showthread.php?p=47714142#post47714142
The 4.4 on sbf.droid is the OTA? (/TMO_RETAIL_XT1053_4.4-13.11.1Q2.X-69-3_MR2_CFC.xml.zip)
beelzebu said:
You dont need to downgrade to install OTA, check here http://forum.xda-developers.com/showthread.php?p=47714142#post47714142
Click to expand...
Click to collapse
Sorry, let me ask again. If you took the ota and you are on t-mobile, can you use rsd to get back to 4.2.2 camera ota? This question is directed towards the locked folks.
Thanks!
Sent from my XT1058 using Tapatalk
tkyjm said:
The 4.4 on sbf.droid is the OTA? (/TMO_RETAIL_XT1053_4.4-13.11.1Q2.X-69-3_MR2_CFC.xml.zip)
Click to expand...
Click to collapse
Nope un not the OTA is tus full firmware for KitKat
I guess what I should have said was official version, not the leaked 140.42.3. But yes, those instructions worked wonderfully.
Why would anyone want to do that.. Kitkat is so nice on my T-Mobile moto x
Sent from my XT1053 using Tapatalk
I have root 4.2.2, bl locker locked Safe Straped xt1058att. ROMs will still hard brick me right?
Biom4st3r said:
I have root 4.2.2, bl locker locked Safe Straped xt1058att. ROMs will still hard brick me right?
Click to expand...
Click to collapse
You can flash stock based ROMs (Eclipse, Krypton) with safestrap if you are rooted and have write protection disabled. But you will need to update the kernel and baseband to the 4.4.2 versions. See instructions on how to do that here: http://rootzwiki.com/topic/116025-romsafestrap-unlockedxt1060-stock-rooted-vzw-164552-kitkat-442/. You can also look in to unlocking your bootloader via the guy in China. That would allow you to flash AOSP based ROMs. See thread here: http://forum.xda-developers.com/moto-x/general/china-middleman-t2751177
Thank you so much. I've tried the Chinese man but my phone is a 2013 build and he didn't have it
Also by flashing 4.4.2 like this I will keep the write protect bypass right?
Sent from my XT1058 using XDA Premium 4 mobile app
Biom4st3r said:
Thank you so much. I've tried the Chinese man but my phone is a 2013 build and he didn't have it
Also by flashing 4.4.2 like this I will keep the write protect bypass right?
Sent from my XT1058 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Correct. I was lucky enough to get my bootloader unlocked the first time around but before that I used this method and it worked great.
Sent from my Motonovo X
The http://rootzwiki.com/topic/116025-romsafestrap-unlockedxt1060-stock-rooted-vzw-164552-kitkat-442/ uses a Verison Safestrap ROM I have an at&t phone is that ok for me to flash?
Biom4st3r said:
The http://rootzwiki.com/topic/116025-romsafestrap-unlockedxt1060-stock-rooted-vzw-164552-kitkat-442/ uses a Verison Safestrap ROM I have an at&t phone is that ok for me to flash?
Click to expand...
Click to collapse
I think it should work if you flash the att safestrap patch located in the krypton thread in the XDA dev section.
Sent from my Motonovo X
Hi!
I need the stock recovery from XT1097 retail, Android 5.1 (LPE23.32-14.2). Someone have it ou know where can I download it? Thanks!
PS: Sorry for my horrible english.
vigia122 said:
Hi!
I need the stock recovery from XT1097 retail, Android 5.1 (LPE23.32-14.2). Someone have it ou know where can I download it? Thanks!
PS: Sorry for my horrible english.
Click to expand...
Click to collapse
Which country? There are various different retail stock firmwares from different countries.
Sent from my XT1095 using Tapatalk
AGISCI said:
Which country? There are various different retail stock firmwares from different countries.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Brazil... But I think I found it here on XDA (of LPE23.32-14... I'll install and then update). Thanks, mate!
-------------------------------------
If someone want the files too: http://forum.xda-developers.com/moto-x-2014/general/moto-x2-xt1097-lollipop-5-1-lpe23-32-14-t3106009 - or directly: https://mega.co.nz/#F!eFMmRLDA!z4Lk6pUYJfsU0GBMi2NqSA , but I hope you'll in post and thanks him
vigia122 said:
Brazil... But I think I found it here on XDA (of LPE23.32-14... I'll install and then update). Thanks, mate!
-------------------------------------
If someone want the files too: http://forum.xda-developers.com/moto-x-2014/general/moto-x2-xt1097-lollipop-5-1-lpe23-32-14-t3106009 - or directly: https://mega.co.nz/#F!eFMmRLDA!z4Lk6pUYJfsU0GBMi2NqSA , but I hope you'll in post and thanks him
Click to expand...
Click to collapse
That is the OTA not the full stock firmware. Here is the full stock firmware for brazil:
http://www.filefactory.com/file/2bo...BR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip
Sent from my XT1095 using Tapatalk
Oh, thanks!! Also, the MEGA link has the OTA update and de full stock firmware (for 5.1, 5.0 and 4.4).
One thing: that file you sent here is to RSDLite, right? I already tried to use it before, but RSDLite gave me an error (something about fsg.mbn and "3/25"). I'll try to flash system.img via fastboot and relock bootloader to see if it works.
vigia122 said:
Oh, thanks!! Also, the MEGA link has the OTA update and de full stock firmware (for 5.1, 5.0 and 4.4).
One thing: that file you sent here is to RSDLite, right? I already tried to use it before, but RSDLite gave me an error (something about fsg.mbn and "3/25"). I'll try to flash system.img via fastboot and relock bootloader to see if it works.
Click to expand...
Click to collapse
The file I linked is for fastboot or rsdlite. You choose which to use.
Sent from my XT1095 using Tapatalk
Esse é o Recovery Stock para xt1097 BR? Ele flesheia Custom Rom?
Isaías J. said:
Esse é o Recovery Stock para xt1097 BR? Ele flesheia Custom Rom?
Click to expand...
Click to collapse
The rules on xda state that you must post in english.
Sent from my XT1095 using Tapatalk
AGISCI said:
The rules on xda state that you must post in english.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
You have stock recovery partition to xt1097, 5.1? It is not the stock ROM, only the recovery equal to TWRP. Or there is only custom recovery?
Isaías J. said:
You have stock recovery partition to xt1097, 5.1? It is not the stock ROM, only the recovery equal to TWRP. Or there is only custom recovery?
Click to expand...
Click to collapse
The stock recovery is in the file I linked.
Sent from my XT1095 using Tapatalk
This installing a custom flashable ROM?
AGISCI said:
The stock recovery is in the file I linked.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
This is what I want:
http://droidviews.com/wp-content/uploads/2012/12/Recovery-Mode.jpg
Not the full firmware. There is one made by Motorola? Or just have CWM and TWRP?
The recovery for motorola is in the zip.
Sent from my XT1095 using Tapatalk
AGISCI said:
That is the OTA not the full stock firmware. Here is the full stock firmware for brazil:
http://www.filefactory.com/file/2bo...BR_XT1097_5.1_LPE23.32-14.2_cid12_CFC.xml.zip
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Thanks mate!
That's so annoying Motorola does'nt provide factory images for BR variants.
BTW, where did you find this image?
The images are uploaded by a person that works in a motorola repair center.
Sent from my XT1095 using Tapatalk
I'd like to flash the recovery stock from marshmallow version "MPE24.49-18". My device model is XT1097 retail BR. I'm using TWRP now and I want to come back to original and receive updates by OTA. Thanks!
cdneto said:
I'd like to flash the recovery stock from marshmallow version "MPE24.49-18". My device model is XT1097 retail BR. I'm using TWRP now and I want to come back to original and receive updates by OTA. Thanks!
Click to expand...
Click to collapse
Sorry, full images of marshmallow don't exist yet. You will have to wait.
Sent from my XT1095 using Tapatalk
I'm still trying to find one for my XT1097 from Telus in Canada. Can't seem to find it anywhere.
AGISCI said:
Sorry, full images of marshmallow don't exist yet. You will have to wait.
Sent from my XT1095 using Tapatalk
Click to expand...
Click to collapse
Do you know if this Marshmallow's full images already exists? Thanks.
lucasmezencio said:
Do you know if this Marshmallow's full images already exists? Thanks.
Click to expand...
Click to collapse
Next time try searching the forums instead of bumping a really old post. http://www.filefactory.com/folder/dd05c058d3ff8dbe/?sort=created&order=DESC&show=25