[Q] How to put phone back to stock - One (M7) Q&A, Help & Troubleshooting

Hi,
Ok so I read a few threads on how to put phone back to stock as I'm sending it back. However a few questions haven't been cleared with me.
1- How do I do it. My CID is HTC_001. So I was thinking to flash that NAND Stock ROM on here and then install stock recovery and relock bootloader?
But when I love bootloader won't that wipe the phone so wouldn't it mess it up badly as this was rooted?
2 - if that worked will it get rid of the tampered image in hboot?
Thanks.
P.s. Ideally I want to get rid of this phone as it isn't really for me. I don't find it my kind of phone.
Sent from my DarkSense'd HTC One Developer Edition using xda premium

does this other thread help?
http://forum.xda-developers.com/showthread.php?t=2247445

KaCeX said:
does this other thread help?
http://forum.xda-developers.com/showthread.php?t=2247445
Click to expand...
Click to collapse
I read that. So what about the tampered thing. Will that go, because apparently RUU is the only way to get rid and this isn't the RUU way
Sent from my DarkSense'd HTC One Developer Edition using xda premium

Only way to get rid of the tampered bit is to flash stock recovery. HTC said they are putting an ruu for the dev edition on HTC dev soon.
Sent from my Nexus 4 using xda app-developers app

Taylor_Swift said:
I read that. So what about the tampered thing. Will that go, because apparently RUU is the only way to get rid and this isn't the RUU way
Sent from my DarkSense'd HTC One Developer Edition using xda premium
Click to expand...
Click to collapse
in that thread they say the Tampered tag wont go away, unless what the above poster said works.

In fastboot run this command >fastboot getvar all
This will help you to find which RUU is compatible with your phone... if available naturally!
You will have this kind of informations :
C:\AndroidSDK\platform-tools>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.661.5
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: TELUS001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4065mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.044s
Click to expand...
Click to collapse
Please remove the lines of your serial number and imei before pasting/copying the infos here.

KaCeX said:
in that thread they say the Tampered tag wont go away, unless what the above poster said works.
Click to expand...
Click to collapse
It's true. The Tampered will be there even you flash the stock recovery.
To put back to stock (Developer Edition) before RUU release:
1. If you have stock backup of your phone, then just restore it.
2. Flash the recovery.img in the 1.29.401.12 OTA. This is the only recovery image file I tested that worked. And before you do that, backup all your data in your phone!!! I lost all my data after I flash the recovery, which made no sense.
BTW, I did 1 & 2 then called Let's Talk and requested RMA today.

Related

Returning to Rogers stock [SOLVED]

Like many others I'm experiencing the purple tint issue and would like to get the sensor or phone replaced.
I've never attempted to get a phone back to stock so would appreciate a hand if possible.
Cheers
Sent from my HTC One using XDA Premium 4 mobile app
overkil6 said:
Like many others I'm experiencing the purple tint issue and would like to get the sensor or phone replaced.
I've never attempted to get a phone back to stock so would appreciate a hand if possible.
Cheers
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
can you post a "fasboot getvar all" (remove IMEI and s/n)
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.631.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4131mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.052s
overkil6 said:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.631.17
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: ROGER001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4131mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.052s
Click to expand...
Click to collapse
one more thing, what's the date of your bootloader
nkk71 said:
one more thing, what's the date of your bootloader
Click to expand...
Click to collapse
May 4, 2013
overkil6 said:
May 4, 2013
Click to expand...
Click to collapse
OK, you can s-off using revone: http://forum.xda-developers.com/showthread.php?t=2314582
Remember you need a 4.1.2 ROM preferably, what ROM are you on now?
I'm on maximushd 20. Any suggestions in a ROM to throw on before s-off?
Sent from my HTC One using XDA Premium 4 mobile app
overkil6 said:
I'm on maximushd 20. Any suggestions in a ROM to throw on before s-off?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Is that based on Androind 4.3 or prior? if it's 4.2.2 or 4.1.2 then go ahead and try revone on it. if it fails, you can always use a guru reset or I have a 4.1.2 ARHD ROM that I know works with revone.
I'll PM you the link, in a bit.
It is 4.3
Sent from my HTC One using XDA Premium 4 mobile app
overkil6 said:
It is 4.3
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
sent you the PM with the link, that ROM works with revone
Ok - S-Off is going. I'm still at unlocked and tamptered. Wasn't sure if I should toggle those yet.
overkil6 said:
Ok - S-Off is going. I'm still at unlocked and tamptered. Wasn't sure if I should toggle those yet.
Click to expand...
Click to collapse
sorry man, i'm going for dinner now, won't be back till tomorrow... I'll catch you then.
nkk71 said:
sorry man, i'm going for dinner now, won't be back till tomorrow... I'll catch you then.
Click to expand...
Click to collapse
No prob - sorry for the delay. 3 year old
overkil6 said:
No prob - sorry for the delay. 3 year old
Click to expand...
Click to collapse
almost same here, a 2 year old and a 6 year old. they're sleeping now:angel:, so we can have some dinner
I am not sure what the plan is, but I am guessing you can S-Off, remove tampered flag, install rogers nandroid backup, unroot, reinstall official recovery, relock bootloader, and send it in ?
overkil6 said:
Ok - S-Off is going. I'm still at unlocked and tamptered. Wasn't sure if I should toggle those yet.
Click to expand...
Click to collapse
Hi @overkil6, for now you need to stay unlocked as I couldnt find a full RUU for your version, only a CWM backup: http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-roger001-1-29-631-17-2013-06-03-zip/
1- So go ahead and remove TAMPERED using revone
2- then download the file above and unzip it on your computer, it will give you a folder named something like "2013-10-13.13.20.30" (just an example)
you're going to have to push this to the correct location using adb
"adb push 2013-10-13.13.20.30 /data/media/clockworkmod/backup/2013-10-13.13.20.30" (obviously replace 2013-10-13.13.20.30 with the correct name)
then reboot to recovery "adb reboot recovery", then in CWM select restore, you should see the folder you just pushed, select it and it will begin the restore operation.
3- I don't know if that backup contains stock recovery or not, so while still in CWM, do "adb reboot recovery" and report back if it booted to CWM again or to stock recovery.
nkk71 said:
Hi @overkil6, for now you need to stay unlocked as I couldnt find a full RUU for your version, only a CWM backup: http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-roger001-1-29-631-17-2013-06-03-zip/
1- So go ahead and remove TAMPERED using revone
2- then download the file above and unzip it on your computer, it will give you a folder named something like "2013-10-13.13.20.30" (just an example)
you're going to have to push this to the correct location using adb
"adb push 2013-10-13.13.20.30 /data/media/clockworkmod/backup/2013-10-13.13.20.30" (obviously replace 2013-10-13.13.20.30 with the correct name)
then reboot to recovery "adb reboot recovery", then in CWM select restore, you should see the folder you just pushed, select it and it will begin the restore operation.
3- I don't know if that backup contains stock recovery or not, so while still in CWM, do "adb reboot recovery" and report back if it booted to CWM again or to stock recovery.
Click to expand...
Click to collapse
Just waiting on the nandroid to download.
"2013-10-13.13.20.30" being the name of the file I've downloaded or the current date?
overkil6 said:
Just waiting on the nandroid to download.
"2013-10-13.13.20.30" being the name of the file I've downloaded or the current date?
Click to expand...
Click to collapse
Once you download the nandroid, unzip it on your PC, it will give you a folder named similar to "2013-10-13.13.20.30" but with the date the nandroid was created.
nkk71 said:
Once you download the nandroid, unzip it on your PC, it will give you a folder named similar to "2013-10-13.13.20.30" but with the date the nandroid was created.
Click to expand...
Click to collapse
Gotcha - having to re-download. Windows is telling me the zip is invalid.
overkil6 said:
Gotcha - having to re-download. Windows is telling me the zip is invalid.
Click to expand...
Click to collapse
corrupt zip definitely no good!!!!

so i managed to revive a bricked htc, now how do i stock it & remove unlock trace

want to say im over the moon, somehow managed to revive a complete brick and got the guru stock rom to install and its come to life! this is even after deleting sd card and it was a complete brick. phew. now, i aleready have a one max, so this is a bonus. question is i have a few options, sell htc one or sell max, or sell both and get a nexus 5. this is for finance reasons, money is not so great atm
my main question -
now that i have managed to get the guru stock rom on, 2.24.401.1
how do i get it back to stock and remove the tampered sign etc ?
bring back, effectively, the warranty.
1. S-off using rumrunner
2. Remove tampered, set to locked
3. RUU
4. Set back to s-on
5. OTA if not on the latest version after RUU
Sent from my HTC One using Tapatalk
n1234d said:
1. S-off using rumrunner
2. Remove tampered, set to locked
3. RUU
4. Set back to s-on
5. OTA if not on the latest version after RUU
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
thank you so much
what ruu would i use, or would i just use the guru one but as an exe ?
i cannot find a 2.24.401.1 rom
also how do i s on, can i use the all in one thats floating round ?
garyfl said:
thank you so much
what ruu would i use, or would i just use the guru one but as an exe ?
i cannot find a 2.24.401.1 rom
also how do i s on, can i use the all in one thats floating round ?
Click to expand...
Click to collapse
Right now, are you locked, and s-off?
Give the output of "fastboot getvar all" after removing imei, s/n
n1234d said:
Right now, are you locked, and s-off?
Give the output of "fastboot getvar all" after removing imei, s/n
Click to expand...
Click to collapse
i am s on atm, im working around this by installing the viper rom so that it is rooted and a different kernal then once thats successful i can s off and install stock rom, my question is can i just flash the guru reset 2.24.401.1 rom in recovery ? it uses aroma installer and can flash stock recovery and radio too or will i need an exe ruu.
heres my get var
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\Gary\Desktop\One_All-In-One_Kit_v\data>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: S
(bootloader) imei: 3
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
C:\Users\Gary\Desktop\One_All-In-One_Kit_v\data>fastboot getvar all
garyfl said:
i am s on atm, im working around this by installing the viper rom so that it is rooted and a different kernal then once thats successful i can s off and install stock rom, my question is can i just flash the guru reset 2.24.401.1 rom in recovery ? it uses aroma installer and can flash stock recovery and radio too or will i need an exe ruu.
heres my get var
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
C:\Users\Gary\Desktop\One_All-In-One_Kit_v\data>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.17.3250.14
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: S
(bootloader) imei: 3
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4307mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.045s
C:\Users\Gary\Desktop\One_All-In-One_Kit_v\data>fastboot getvar all
Click to expand...
Click to collapse
To get s-off, you need to be as close to stock as possible, so I'd say, flash the guru reset-->run rumrunner-->set bootloader back to locked, remove Tampered-->flash RUU-->OTA update.
Looks like this RUU should work..
Good job getting your one up and running but lol deleted the sd card is far from a complete brick. Also it's a matter of opinion but I wouldn't get rid of my one for any phone out right now just because of the speakers. The one max looks pretty good I wouldn't mind having that as a phone. I haven't checked the development on that tho. I need a phone with lots of development on xda.
Sent from my HTC One using Tapatalk
gmfeny said:
Good job getting your one up and running but lol deleted the sd card is far from a complete brick. Also it's a matter of opinion but I wouldn't get rid of my one for any phone out right now just because of the speakers. The one max looks pretty good I wouldn't mind having that as a phone. I haven't checked the development on that tho. I need a phone with lots of development on xda.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
ive got a guy buying it tonight so its £300 i didnt have, although the one has ois and beats for a more fuller sound ill stick with the one max, i kind of love it. wierd going from 5.9 to 4.7.
it was just the sd wipe, it was a paperweight and wouldnt come on i almost sold it for £50 because it must of needed a jtag repair.
its up and purring like a baby.
regarding ruu
can i not just use the guru reset 2.24.401.1 that got this working from the beginning ?
garyfl said:
ive got a guy buying it tonight so its £300 i didnt have, although the one has ois and beats for a more fuller sound ill stick with the one max, i kind of love it. wierd going from 5.9 to 4.7.
it was just the sd wipe, it was a paperweight and wouldnt come on i almost sold it for £50 because it must of needed a jtag repair.
its up and purring like a baby.
regarding ruu
can i not just use the guru reset 2.24.401.1 that got this working from the beginning ?
Click to expand...
Click to collapse
also you say lock the bootloader then install ruu but weve both listed a zip file, do i have to do this in fastboot ?
ive forgotten the command to flash ruu zips
its okay, the guy was happy to buy it rooted anyway. fiasco over just hope development picks up for the max, its kinda slow :/
garyfl said:
its okay, the guy was happy to buy it rooted anyway. fiasco over just hope development picks up for the max, its kinda slow :/
Click to expand...
Click to collapse
Nice, sorry I couldn't help you, it was 1am and I fell asleep :X
Sent from my HTC One using Tapatalk

Help returning to stock for repair

Hi Guys i am following this guide to restore my phone to stock for HTC repair (camera issue)
http://forum.xda-developers.com/showthread.php?t=2358738
do I need to make the phone s-on and lock the bootloader?
it mentions that can brick if has a modified HBOOT when re-locking the bootloader
so my main question is this "is the Stock HBOOT included in RUU?
Dynomutt said:
Hi Guys i am following this guide to restore my phone to stock for HTC repair (camera issue)
http://forum.xda-developers.com/showthread.php?t=2358738
do I need to make the phone s-on and lock the bootloader?
it mentions that can brick if has a modified HBOOT when re-locking the bootloader
so my main question is this "is the Stock HBOOT included in RUU?
Click to expand...
Click to collapse
you might wanna check my guide: http://forum.xda-developers.com/showthread.php?t=2541082
thanks so much
Dynomutt said:
thanks so much
Click to expand...
Click to collapse
no problem, please follow instruction 1, then 2 then 3, etc.
s-on is OPTIONAL, it's up to YOU to decide that
still having trouble, found my original stock backup of 4.2.2, but now have HBOOT 1.44, i really need a full Vodafone UK RUU the .exe version would probably be best but just cant find anywhere, cant even flash the OTA RUU probably because I have mismatched firmware, recovery and HBOOT now,
well UPS is picking it up tomorrow so i'll just have to hope they don't refuse repair due to software not being 100% stock especially as the issue is a hardware fault
wish me luck and thanks for you help
Dynomutt said:
still having trouble, found my original stock backup of 4.2.2, but now have HBOOT 1.44, i really need a full Vodafone UK RUU the .exe version would probably be best but just cant find anywhere, cant even flash the OTA RUU probably because I have mismatched firmware, recovery and HBOOT now,
well UPS is picking it up tomorrow so i'll just have to hope they don't refuse repair due to software not being 100% stock especially as the issue is a hardware fault
wish me luck and thanks for you help
Click to expand...
Click to collapse
can u post a "fastboot getvar all" (remove IMEI and s/n)
nkk71 said:
can u post a "fastboot getvar all" (remove IMEI and s/n)
Click to expand...
Click to collapse
sure will thanks, whats ODD is that the CID does not match my CID in bootloader, in bootloader it says VODAP001 is my CID,
EDIT: just check it and it is HTC__001 changing back to VODAP001 and trying OTA again
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3984mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.087s
Dynomutt said:
sure will thanks, whats ODD is that the CID does not match my CID in bootloader, in bootloader it says VODAP001 is my CID
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.21.3263.04
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.12
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: SHxxxxxxxxxxxxxx
(bootloader) imei: 3xxxxxxxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3984mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
getvar:all FAILED (status read failed (Too many links))
finished. total time: 0.087s
Click to expand...
Click to collapse
1- you might wanna edit your post and remove IMEI and s/n
2- from above getvar, you look like you followed the first part of my guide an now your phone, is an European unbranded phone.
3- so quick quick question, you wanna go back to "VODAP001" (do you really need to?) ? is there a nandroid backup out there?
nkk71 said:
1- you might wanna edit your post and remove IMEI and s/n
2- from above getvar, you look like you followed the first part of my guide an now your phone, is an European unbranded phone.
3- so quick quick question, you wanna go back to "VODAP001" (do you really need to?) ? is there a nandroid backup out there?
Click to expand...
Click to collapse
Yeah sorry I noticed edited post now, ive changed my CID back to VODAP001, I have my original 4.2.2 stock rom flashed hopefully be able to pull to 4.3 OTA once im back up and running, thanks for you help mate
thanks again for your help, OTA is now downloading and i should be back to fully stock soon and can send for repair worry free.
Dynomutt said:
Yeah sorry I noticed edited post now, ive changed my CID back to VODAP001, I have my original 4.2.2 stock rom flashed hopefully be able to pull to 4.3 OTA once im back up and running, thanks for you help mate
Click to expand...
Click to collapse
don't forget you need "stock recovery" for OTA to update correctly, and do not go from s-off to s-on on 4.3 (hboot 1.55) it will most likely trigger a "tamper detected"!!
if you did get hboot 1.55 just keep s-off, otherwise you're gonna be back on square 1.
I have to sign off now, but you can PM me if anything comes up before tomorrow.
if my guide did help you in any way, i would appreciate it if you posted your details, in my thread (whenever you get a chance), it will be helpful to others.
and hit the thanks button in the guide
good luck :fingers-crossed:
Yeah I flashed my original stock backup, flashed stock recovery and locked bootloader , I had forgot to change my CID back, it wasn't till u advised that I post my " getvar all" that I noticed, I haven't checked if my HBOOT is still 1.44 or updated to 1.55 yet, I left s-off hope it still is, again many thanks mate
Sent from my HTC One using xda app-developers app
Yeah I'm on HBOOT 1.55 now but still s-off, I take it if I s-on again I won't be able to get it back, I used rumrunner s-off last time but I that was on HBOOT 1.54 iirc, not that it matter now anyway
Sent from my HTC One using xda app-developers app
Dynomutt said:
Yeah I'm on HBOOT 1.55 now but still s-off, I take it if I s-on again I won't be able to get it back, I used rumrunner s-off last time but I that was on HBOOT 1.54 iirc, not that it matter now anyway
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
Keep s-off, otherwise u may end up having to start at square 1, and if I read correctly, u have to send it off in the morning.
UK repair centers seem quite decent, and they can't really prove it wasnt s-off to begin with.
"what's s-what anyways, hmm, no clue what u talking about"
Sent from my HTC One using Tapatalk
nkk71 said:
Keep s-off, otherwise u may end up having to start at square 1, and if I read correctly, u have to send it off in the morning.
UK repair centers seem quite decent, and they can't really prove it wasnt s-off to begin with.
"what's s-what anyways, hmm, no clue what u talking about"
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
ha ha yeah, weirdly though this morning I still had root, is this normal after OTA?

[Q] Back to Stock for Bell HTC One

I have been reading a lot of guides and I am still not sure how I can take my Bell phone and bring it back to stock. I have S-OFF and GPE right not which I installed via a zipped RUU.
Now, if I want to get the latest 4.2.2 that Bell made available for the HTC One, I have to somehow be able to get the OTA and have no custom recovery. I could not find an RUU ZIP or EXE for bell (666), only a stock ROM. I could install that but comes the OTA, it won't install because of the custom recovery.
How can I go back to stock from here? I have been told by a few to just stick to the GPE edition but I would like to got back to sense.
Thank you.
Nic2112 said:
I have been reading a lot of guides and I am still not sure how I can take my Bell phone and bring it back to stock. I have S-OFF and GPE right not which I installed via a zipped RUU.
Now, if I want to get the latest 4.2.2 that Bell made available for the HTC One, I have to somehow be able to get the OTA and have no custom recovery. I could not find an RUU ZIP or EXE for bell (666), only a stock ROM. I could install that but comes the OTA, it won't install because of the custom recovery.
How can I go back to stock from here? I have been told by a few to just stick to the GPE edition but I would like to got back to sense.
Thank you.
Click to expand...
Click to collapse
post output of "fastboot getvar all"
remove S/N & IMEI before posting
kamilmirza said:
post output of "fastboot getvar all"
remove S/N & IMEI before posting
Click to expand...
Click to collapse
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3975mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Nic2112 said:
C:\Android>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: ...
(bootloader) imei: ...
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: GOOGL001
(bootloader) battery-status: good
(bootloader) battery-voltage: 3975mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-bee46337
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.076s
Click to expand...
Click to collapse
your previous CID was BM_001, right?
look into nkk71 SuperGUIDE in my signature
kamilmirza said:
post output of "fastboot getvar all"
remove S/N & IMEI before posting
Click to expand...
Click to collapse
NKK71 helped me bring the phone back to stock GPE, but I'm getting weird problems and I am not sure why, but I remember I didn't have those problems with stock. Stuff like streaming not working over WiFi, MMS messages not sent when I have WiFi enabled, stuff like that.
The problem is that Bell (x.xx.666x.) has no RUU that I can find, only a nandroid which I could use but that won't give me the option to get the OTA (I think)
kamilmirza said:
your previous CID was BM_001, right?
Click to expand...
Click to collapse
I believe so, yes.
Nic2112 said:
NKK71 helped me bring the phone back to stock GPE, but I'm getting weird problems and I am not sure why, but I remember I didn't have those problems with stock. Stuff like streaming not working over WiFi, MMS messages not sent when I have WiFi enabled, stuff like that.
The problem is that Bell (x.xx.666x.) has no RUU that I can find, only a nandroid which I could use but that won't give me the option to get the OTA (I think)
Click to expand...
Click to collapse
yes sadly there is only nandroid of BM right now
I just updated the firmware today, the one I had was for 4.3 so I upgraded that. I'm just not sure if the problems come from the fact that there is no HTC One google edition in Canada and that either my radios or firmware are not working perfectly on bell.
Nic2112 said:
I just updated the firmware today, the one I had was for 4.3 so I upgraded that. I'm just not sure if the problems come from the fact that there is no HTC One google edition in Canada and that either my radios or firmware are not working perfectly on bell.
Click to expand...
Click to collapse
yeah maybe that could be the problem
why not try the nandroid and see how it goes?
Hmm, you are going to have a HBOOT mismatch if you run the Canadian Restock method in my guide posted in my signature, as it uses 1.55HBOOT for 4.3 JB, but you are on 1.56 HBOOT.
However if you run the RUU ZIP file for TELUS, you will get the right HBOOT. http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Download and rename to Telus.zip
See if you can do this:
fastboot oem writecid TELUS001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip Telus.zip
fastboot flash zip Telus.zip (You will need to run this command twice due to HBOOT downgrade)
fastboot reboot (if it doesn't reboot automatically)
NOTE: I have not personally ran the ZIP file above, but it should be fine.
Oh Wow, there is a guide for Canadian HTC One, didn't know that!
Are you sure that a Telus RUU will work on a Bell phone? They use different networks I think
SaHiLzZ said:
Hmm, you are going to have a HBOOT mismatch if you run the Canadian Restock method in my guide posted in my signature, as it uses 1.55HBOOT for 4.3 JB, but you are on 1.56 HBOOT.
However if you run the RUU ZIP file for TELUS, you will get the right HBOOT. http://www.htc1guru.com/dld/ruu-zip...157-04_release_336571_signed_2_decrypted-zip/
Download and rename to Telus.zip
See if you can do this:
fastboot oem writecid TELUS001
fastboot reboot-bootloader
fastboot oem rebootRUU
fastboot flash zip Telus.zip
fastboot flash zip Telus.zip (You will need to run this command twice due to HBOOT downgrade)
fastboot reboot (if it doesn't reboot automatically)
NOTE: I have not personally ran the ZIP file above, but it should be fine.
Click to expand...
Click to collapse
As I said, i have no personally tested it, but thats the only way to bring your HBOOT down to 1.55.
Other option will be to go all the way down to 1.44 HBOOT. You NEED to be comfortable with using adb/fastboot commands REGARDLESS whichever options you decide to go with.
SaHiLzZ said:
As I said, i have no personally tested it, but thats the only way to bring your HBOOT down to 1.55.
Other option will be to go all the way down to 1.44 HBOOT. You NEED to be comfortable with using adb/fastboot commands REGARDLESS whichever options you decide to go with.
Click to expand...
Click to collapse
I know how to go back to 1.44, I have done that before.
So what you are saying is that if I have the nandroid installed, and stock recovery from your thread, the phone will detect the OTA? It should install no problem because it will be a standard recovery.
Yes 1.44 HBOOT, 1.44 Compatible BELL Nandroid, and Stock recovery will give you future OTAs.
SaHiLzZ said:
Yes 1.44 HBOOT, 1.44 Compatible BELL Nandroid, and Stock recovery will give you future OTAs.
Click to expand...
Click to collapse
Thatk you, one last question before I try this, the OTA, will it replace the radios and firmware as well to Bell's? I guess it depends on what they put in the OTA.
Yes, OTA generally contain new OS, HBOOT, Recovery, and RADIO, practically a full RUU replacement, but not all. IF you are S-ON, you will need to lock bootloader after loading stock recovery, but if you are S-OFF, that doesnt matter, and I will suggest to stay S-OFF!
Please help
I have bell HTC one M7 one Hboot 1.56 the phone boot loader is unlocked rooted and soff the mic is not working on phone I need to set back to stock I can have warranty fix phone can anyone please help me get back to stock so they cant tell it was touched
ginuwine96 said:
I have bell HTC one M7 one Hboot 1.56 the phone boot loader is unlocked rooted and soff the mic is not working on phone I need to set back to stock I can have warranty fix phone can anyone please help me get back to stock so they cant tell it was touched
Click to expand...
Click to collapse
Check the signature block of the previous post (nkk71's SuperGUIDE to returning 100% back to stock) or this one Return to 100% Stock Guide and follow it.
Not sure what file I need
majmoz said:
Check the signature block of the previous post (nkk71's SuperGUIDE to returning 100% back to stock) or this one Return to 100% Stock Guide and follow it.
Click to expand...
Click to collapse
This is my phones Info I am not sure what file to use for it ?
bootloader) version: 0.5
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 4.19.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4258mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-4dab9d12
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.070s
ginuwine96 said:
This is my phones Info I am not sure what file to use for it ?
(bootloader) version-bootloader: 1.56.0000
(bootloader) version-main: 4.19.666.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) product: m7_ul
(bootloader) modelid: PN0712000
(bootloader) cidnum: BM___001
Click to expand...
Click to collapse
If you're going to follow my guide, you'll need to use CWM method, using this nandroid: http://www.htc1guru.com/dld/m7-cwm-nandroid-backup-cid-bm___001-1-29-666-5-zip/
make sure to have read it once or twice, to be sure you're comfortable with the process

Unroot HTC

HEY,
I own an HTC M7 I rooted my device but now the person that is gonna buy my phone want it unrooted. which is the best method to do it?
Thanks in advance
cdlt1290 said:
HEY,
I own an HTC M7 I rooted my device but now the person that is gonna buy my phone want it unrooted. which is the best method to do it?
Thanks in advance
Click to expand...
Click to collapse
RUU is the best method to return your phone to complete stock
donkeykong1 said:
RUU is the best method to return your phone to complete stock
Click to expand...
Click to collapse
can you recommend me one, I hace the HTC One M7 unlocked
cdlt1290 said:
can you recommend me one, I hace the HTC One M7 unlocked
Click to expand...
Click to collapse
Post your fastboot getvar all output, but erase your IMEI and serial number from it. That way we will be able to point you in the right direction
What a coincidence!
I'm about to "unroot" my old HTC M7 for my kid so he can play Pokemon Go on it.
It has TWRP 3.0.2-0 on it, and the fastboot getvar of it looks like this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.19.3263.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 2.24.401.8
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: xxxxxxxx
(bootloader) imei: xxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4121mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-d959c75800
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I hope you do not mind helping me too.
htc-hd2 said:
What a coincidence!
I'm about to "unroot" my old HTC M7 for my kid so he can play Pokemon Go on it.
It has TWRP 3.0.2-0 on it, and the fastboot getvar of it looks like this:
I hope you do not mind helping me too.
Click to expand...
Click to collapse
I'm new at this, can you tell me please how did you get the fastboot getvar?
thanks but I figure it out, I´m trying to sell my device and the buyer needs it to play the same Pokemon Go that is why she want it unroot.
C:\fastboot>fastboot getvar all
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.29
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.18.708.51
(bootloader) version-misc: PVT SHIP S-ON
(bootloader) serialno: xxxxxxxxxxxx
(bootloader) imei: xxxxxxxxxxxxxxx
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0714000
(bootloader) cidnum: HTC__622
(bootloader) battery-status: good
(bootloader) battery-voltage: 4044mV
(bootloader) partition-layout: Generic
(bootloader) security: on
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-1866a1a9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
finished. total time: 0.044s
Thanks for you help
Hmmm rethinking this now.
Not sure if this "old" device will be able to play Pokémon Go when flashed to the original "old" ROM!
it needs Android 4.4+
htc-hd2 said:
Hmmm rethinking this now.
Not sure if this "old" device will be able to play Pokémon Go when flashed to the original "old" ROM!
it needs Android 4.4+
Click to expand...
Click to collapse
This old device received officiall Android Lollipop years ago, so you'll be fine with pokemon go. I'm gonna see if I have my old h-boot stored for you when I come home from work. I think you can go directly to the last one because your phone is s-off, but I'm not sure about that because your h-boot is very old. If you can hold on for about 12 hours, I'll point you to the right direction then
donkeykong1 said:
This old device received officiall Android Lollipop years ago, so you'll be fine with pokemon go. I'm gonna see if I have my old h-boot stored for you when I come home from work. I think you can go directly to the last one because your phone is s-off, but I'm not sure about that because your h-boot is very old. If you can hold on for about 12 hours, I'll point you to the right direction then
Click to expand...
Click to collapse
what about me you think you can help me? I think I have S-On
htc-hd2 said:
Hmmm rethinking this now.
Not sure if this "old" device will be able to play Pokémon Go when flashed to the original "old" ROM!
it needs Android 4.4+
Click to expand...
Click to collapse
donkeykong1 said:
This old device received officiall Android Lollipop years ago, so you'll be fine with pokemon go. I'm gonna see if I have my old h-boot stored for you when I come home from work. I think you can go directly to the last one because your phone is s-off, but I'm not sure about that because your h-boot is very old. If you can hold on for about 12 hours, I'll point you to the right direction then
Click to expand...
Click to collapse
Should update his firmware to 7.19.401.2 using the full firmware zip and than he can flash the 7.19.401.51 RUU.
cdlt1290 said:
what about me you think you can help me? I think I have S-On
Click to expand...
Click to collapse
Downgrade your version-main # to 7.18.708.2 using the guide at the end of this post (how to downgrade with s-on). Once done flash the 7.18.708.21 RUU using instruction of this post. Finally you'll have to take 2 ota update so you're back on 7.18.708.51 (if you need to unlock/root again make sure to install update before)
alray said:
Should update his firmware to 7.19.401.2 using the full firmware zip and than he can flash the 7.19.401.51 RUU.
Downgrade your version-main # to 7.18.708.2 using the guide at the end of this post (how to downgrade with s-on). Once done flash the 7.18.708.21 RUU using instruction of this post. Finally you'll have to take 2 ota update so you're back on 7.18.708.51 (if you need to unlock/root again make sure to install update before)
Click to expand...
Click to collapse
Hi thanks for the help, I did everything you said but in the last step when i was trying to flash the RUU, but the first command was
6.fastboot oem rebootRUU and then the device restart i supposed and a black screen with HTC logo appear and didn´t let me put the second command that is 7.fastboot flash zip RUU.zip
what did I did wrong? hope you can help me
cdlt1290 said:
Hi thanks for the help, I did everything you said but in the last step when i was trying to flash the RUU, but the first command was
6.fastboot oem rebootRUU and then the device restart i supposed and a black screen with HTC logo appear and didn�´t let me put the second command that is 7.fastboot flash zip RUU.zip
what did I did wrong? hope you can help me
Click to expand...
Click to collapse
fastboot oem rebootRUU will make your phoned reboot in ruu mode (that black screen with silver htc logo). Once in ruu mode, it's time to flash the ruu using "fastboot flashing zip ruu.zip". During the flashings process you should get an error saying "flush image again immediately", the phone will reboot itself in ruu mode again and the flashing will continue,it's all normal.
Sent from my HTC One using XDA Labs
alray said:
fastboot oem rebootRUU will make your phoned reboot in ruu mode (that black screen with silver htc logo). Once in ruu mode, it's time to flash the ruu using "fastboot flashing zip ruu.zip". During the flashings process you should get an error saying "flush image again immediately", the phone will reboot itself in ruu mode again and the flashing will continue,it's all normal.
Sent from my HTC One using XDA Labs
Click to expand...
Click to collapse
thank I did it! i wasn't using htc_fastboot that was the problem! thanks very much for your help, last question how do I check it`s unrooted?
Thank you all for the help / info.
I'm away for the weekend so I'm not able to "flash" anything till Monday.
For now have a nice weekend.
cdlt1290 said:
thank I did it! i wasn't using htc_fastboot that was the problem! thanks very much for your help, last question how do I check it`s unrooted?
Click to expand...
Click to collapse
If the ruu flashed fine, it's not rooted anymore. Root files are stored on the /system partition which is wiped and flashed back to stock with the ruu.
Sent from my HTC One using XDA Labs
I'm about to flash the phone.
Can this all be done with TWRP, or do I need to go the ADB way?
htc-hd2 said:
I'm about to flash the phone.
Can this all be done with TWRP, or do I need to go the ADB way?
Click to expand...
Click to collapse
Flashing firmware or RUU is done using fastboot commands in RUU mode, not with twrp, neither with adb.
Okay.
I've updated the firmware to 7.19.401.2
Fastboot getvar of it looks like this:
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.61.0000
(bootloader) version-baseband: 4T.35.3218.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 7.19.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno: FA354W903711
(bootloader) imei: 354436051520417
(bootloader) meid: 00000000000000
(bootloader) product: m7_ul
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0710000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4299mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-0e2a13e5
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
I've 7.19.401.51 RUU (PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip) ready to be flashed.
Now I've had a look at some howto's, but I'm still lost on what to do next!
I feel such an idiot :/
htc-hd2 said:
Okay.
I've updated the firmware to 7.19.401.2
Fastboot getvar of it looks like this:
I've 7.19.401.51 RUU (PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.51_Radio_4T.35.3218.16_10.33Q.1718.01L_release_458803_signed.zip) ready to be flashed.
Now I've had a look at some howto's, but I'm still lost on what to do next!
I feel such an idiot :/
Click to expand...
Click to collapse
Now flashing the ruu using htc_fastboot.exe
Look at the stickies in the general section to find the lollipop ruu collection thread. Instructions how to flash are provided at post #1.
Sent from my HTC One using XDA Labs

Categories

Resources