I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had the exact same problem. I went insane scouring the web for hours trying to find a single person with the same problem until I finally gave up. Does anyone know the last version that actually worked?
I also have this problem, do anyone have any idea how to fix this problem?
edhogan1224 said:
I recently installed both AOKP and CM10, the most recent versions on my Verizon Droid 3. Now, i have no service. I downloaded (via wifi) the app "lte on/off" to get a look at what was happening, and the radio keeps rapidly switching on and off, on and off over and over again. This happened with all the AOKP versions i tried and both CM10 versions I tried. Ive rebooted, re-flashed, tried different download links, reflashed again, wipe and reflash. Im at a complete loss here guys, any help would be appreciated. Thanks!
Click to expand...
Click to collapse
I had similar problems on cm10.1. I have no idea if this will work (I'm outside the US, and my phone asked me to activate the phone), but I also had no service, no data. I changed my network mode from GLOBAL to GSM/WCDMA auto. Now I have service and data (Data after applying the correct carrier apn settings)
I hope this helps you all
P.S. after this step I made factory resets without the need to do the above step again (You only need to put the correct apn settings again if your on networks other than Verizon)
Related
Im new to flashing roms, so bare with me. I flashed my first rom last week, using Andromeda3 and Ursa Minor #2 kernel, everything worked great except, i couldnt connect to 3G/H, even though it showed up on notification bar, tried looking for answers, i ended up flashing different modems to no avail. So, i flashed back to stock eclair, used kies mini to upgrade to Froyo 2.2 UCKB1, Data worked. I then flashed UCKB2 rom, data didnt worked) i tried wiping cache and all that, still no data connection, btw, wfi worked. So i flashed back to UCKB1, again, everything worked perfectly. The other day, i flashed Fusion XI and GB bootloaders, i must say i like this rom very much, but again still couldnt connect to 3G/H, everything else worked, although i havent tested the GPS yet, i am getting amazing DL/UL speeds through wifi. Anyway, i searched XDA for any answers i could find and pretty much tried them all, seems like only KB1 3G will work, but any custom rom out there, data hasnt worked even though i see it in notification area, i'd use market and browser, but would say could not connect. Am i doing something wrong/ missing a step?? I really like Fusion XI and dont want to flash back to stock. Any help would be appreciated.
Didnt know where else to post this, seems like other people dont have the data connection issue :/
That's weird.
Try flashing the kb1 modem on fusion.
I did try flashing the KB1 modem, but that too, didnt work. it only works if i go back to stock KB1 for some reason.
where do you live? what Carrier are you with?
have you checked your APN settings?
fill in your location and carrier/ device info in your signature/ xda user information.
I Live in Southeastern Pennsylvania. And currently have AT&T as my carrier. I tried APN settings, but not sure what to set it too, i have used APN Manager from the Market.
Try resetting ur apn settings to default. Then reboot.
Sent by XDA Premium App
how do u reset apn settings?
Settings, wireless and networks, mobile networks, access point names. Now hit the menu key and reset default apn well be on the bottom left...
Ok, tried that, still a no go connecting to data. I just flashed stock 2.1 then 2.2 update through Kies mini, i no longer have data connection even on official stock roms could this be a hardware issue??? gps sucks. ran a gps test using the app from market. other than that, everything else is working. what did i do wrong?
So I had some escapades today, I had my SGS running jellybean, then I tried to change the screen density and bang, bootloop. I panicked and after some odin fiddling managed to get it booting Darky using odin. I was in a room with no signal at the time so I thought nothing of not having any signal, even so I then went ahead and used recovery to reinstall my Jellybean rom since that's a bit nicer than the 2.3 Darky.
Long and the short of it is, I can search for networks in my options and it will find them, but when I tell it to connect to one it says "Can't connect to this network right now. Try again later"
I have tried later and surprise surprise it didn't work. I have tried installing a different radio, clearing the dvalik cache and fixing permissions as well as a few other things. Please can anyone suggest something, this seems to be a very uncommon scenario and it's stressing me out that I can't find any solutions.
alzrnb said:
So I had some escapades today, I had my SGS running jellybean, then I tried to change the screen density and bang, bootloop. I panicked and after some odin fiddling managed to get it booting Darky using odin. I was in a room with no signal at the time so I thought nothing of not having any signal, even so I then went ahead and used recovery to reinstall my Jellybean rom since that's a bit nicer than the 2.3 Darky.
Long and the short of it is, I can search for networks in my options and it will find them, but when I tell it to connect to one it says "Can't connect to this network right now. Try again later"
I have tried later and surprise surprise it didn't work. I have tried installing a different radio, clearing the dvalik cache and fixing permissions as well as a few other things. Please can anyone suggest something, this seems to be a very uncommon scenario and it's stressing me out that I can't find any solutions.
Click to expand...
Click to collapse
check apn settings?
slaphead20 said:
check apn settings?
Click to expand...
Click to collapse
Yeah I've checked them and unfortunately they all seem to be in order still, though there are a lot more settings than any website offers things to put in them
same problem
i am having this same problem on all cyanogenmod 7,9,10. i have tried many radio and modem flashes. i can scan and see networks, but i can never connect to them.
have you made any progress?
Problem is EFS folder which tends to do with IMEI.
To fix it you need to copy the backup EFS folder from your SDCARD to the root of your device. (/)
If you don't have a backup you'll have to ODIN back to stock and re-root....etcetera
Sent from my GT-P7500 using xda app-developers app
thx
thank you for the response. I put it back to stock lastnight before bed so i will give this a try.
i have the gti9000m from bell in canada. I updated it through kies to 2.3.3 gingerbread and it all went badly. It would boot up and load to the os be on for a bit then reset. It turned out to be wifi problem, running it on airplane mode stopped it from rebooting. Then if i tried to turn on wifi it would quickly reboot.
So then i tired all the cyanogenmods, which worked it stopped rebooting all the time. however the wifi would connect and work for about a minute then it would drop. doing the
1.turnOn gps
2.turnOn wifi
3. turnOff gps
this would let the wifi work again for about a minute. I tried all the wifi fixer apk, and a bunch of wifi.zip mods, and then ping the router gateway constantly, none solved this problem. Very annoying because i need the wifi working for develpoment of apps. I have spent a great many hours on this problem. lots of people seam to have this problem but no solutions have wokred for me.
So, my questions are....
1. does your wifi work?
2. how the heck do i get mine to work?
back to stock
After going back to stock then upgrading connecting to network operators is fine.
wifi is still broken though
Ladies and gents;
So i changed my rom a few days ago for the CM7.2 thanks to a guide on here, and it really impressed me in terms of performance and the whole package.
Problem is, i can't seem to connect to 3g, and cant seem to create any apn's either, device just doesnt do anything when i click on create new apn!
I have made sure that the baseband is on the right selection and so are my network settings...
I have a motorola milestone that used to be locked to TELUS and is now unlocked and using FIDO
rolley said:
Ladies and gents;
So i changed my rom a few days ago for the CM7.2 thanks to a guide on here, and it really impressed me in terms of performance and the whole package.
Problem is, i can't seem to connect to 3g, and cant seem to create any apn's either, device just doesnt do anything when i click on create new apn!
I have made sure that the baseband is on the right selection and so are my network settings...
I have a motorola milestone that used to be locked to TELUS and is now unlocked and using FIDO
Click to expand...
Click to collapse
BuMP!!
more problems, lock from volume stopped working and home shortcut stopped working also....kidna of acting up, already reset dalvik cache and normal cache,...
rolley said:
BuMP!!
more problems, lock from volume stopped working and home shortcut stopped working also....kidna of acting up, already reset dalvik cache and normal cache,...
Click to expand...
Click to collapse
Its possible that you might have just had a bad installation. Id recommend you backup your data and apps, go into recovery preform a factory reset, wipe all data and cache, and re-install the CM 7.2 ROM. I have had similar problems to what your having in the past when installing new versions of CM and most of the time re-installing the ROM did the trick.
shimp208 said:
Its possible that you might have just had a bad installation. Id recommend you backup your data and apps, go into recovery preform a factory reset, wipe all data and cache, and re-install the CM 7.2 ROM. I have had similar problems to what your having in the past when installing new versions of CM and most of the time re-installing the ROM did the trick.
Click to expand...
Click to collapse
i tried just doing a dalvik reset and all data+cache, it worked for the volume wake and the rest, but still no 3g connection
A simple battery pull may work.
Sent from my SCH-I535 using xda premium
rolley said:
i tried just doing a dalvik reset and all data+cache, it worked for the volume wake and the rest, but still no 3g connection
Click to expand...
Click to collapse
I had the same problem with both 3G and 2G as well. I had to manually add APN in Settings>Wireless and Network>Mobile Network>Access point names
It works fine now, even when switching from 2G to 3G while connection is active. CM7 7.2.2
I have an SCH-i800 that I have CM9 (p1c 9.1.0) installed on. I have been using it for several weeks with no problem. Since I am planning on going on a trip, I decided to active pre-paid Verizon service for the tablet. At first, I attempted to activate the device. It went through the phone call but after a minute, it just sat at activating. That is when I noticed that the radio state in the status bar had an X on it. I rebooted the tablet to try again and got "com.android.phone has topped unexpectedly". I re-flashed CM9 (at the time I was using 9.0.0) and it worked again. Activation was not necessary. After a day, the error came up again and radio state went to off with an X. I tried 9.1.0, same problem after a day. I even tried a nightly CM10, same problem. Reboots, cache wipes, permission fixes do not make it work. The error persists until a re-flash of CM. I see on the Support Downloads for the Verizon Tablet, there are two modem files. My baseband version is currently S:I800.0.3V.EI04. I have attempted to "flash" these both via Odin (which failed after a couple minutes) and ZIP (which looked like it worked) to the EC02 on the site, but my baseband doesn't seem to change.
So my first question is, is there a how-to on flashing as I have searched high and low on one for the Verizon Tab specifically, and have yet to find one. Is there a ZIP file that is specifically meant for the i800? I am almost certain this is my problem and that a downgrade (this tablet when stock was updated to the latest Verizon image).
My second question is, has anyone else experienced this? Is there someone that is using a CM9 Verizon tab with EI04 baseband and not have this problem?
Is there a way I can track down what crashed the program? I have tried logcat, but it doesn't appear to give me much detail other than to tell me that it stopped.
And if you ask, no I did not use the Verizon service with this tablet before putting CM9 on it, so I wouldn't know if it worked before.
Any input that someone could provide would be useful. Thanks!
I just updated to CM 10 RC1 over-the-air from CyanogenMod on my Sprint HTC One a few days ago (when it was released). I went to update to the newest nightly today, but cancelled the download midway because my WiFi speeds were way too slow and the download was draining my battery too fast. Now, my phone is stuck on "Searching for Service", and I can't figure out how to get it to get signal again, because I AM in an area with very good signal. Any ideas? I need my phone working ASAP!
I've tried rebooting, as well. No luck. Also tried restoring an older Nandroid - still no luck.
mrinehart93 said:
I just updated to CM 10 RC1 over-the-air from CyanogenMod on my Sprint HTC One a few days ago (when it was released). I went to update to the newest nightly today, but cancelled the download midway because my WiFi speeds were way too slow and the download was draining my battery too fast. Now, my phone is stuck on "Searching for Service", and I can't figure out how to get it to get signal again, because I AM in an area with very good signal. Any ideas? I need my phone working ASAP!
I've tried rebooting, as well. No luck. Also tried restoring an older Nandroid - still no luck.
Click to expand...
Click to collapse
Did you lose the ability to make and place calls? And do data and texting still work?
Sent from my XT897 using Tapatalk 2
Get back into a sense ROM and in the dialer ##72786#
Go to network settings change it to cmda/evdo let it get service and change it back.please note u have to do it every time
Sent from my One using XDA Premium HD app
pbedard said:
Go to network settings change it to cmda/evdo let it get service and change it back.please note u have to do it every time
Sent from my One using XDA Premium HD app
Click to expand...
Click to collapse
This worked perfectly! Thanks a bunch!
I am also having the same problem. After flashing the latest release candidate. I lost my service and my mobile network state says disconnected now. I've tried everything so far no luck. I've gone back into my original stock nandroid and nothing. No matter what I flash to, phone has no service.
Change the network mode once after reboot otherwise you get no service at all...T_T
sent from my Sprint ONE
j_rivers said:
Change the network mode once after reboot otherwise you get no service at all...T_T
sent from my Sprint ONE
Click to expand...
Click to collapse
did so. I did not get any data whatsoever
Jaye1789 said:
did so. I did not get any data whatsoever
Click to expand...
Click to collapse
You also need to change the CDMA subscription if you're using a simcard.
sent from my m7spr using tapatalk 4
I have this same issue with the RC1 and have been changing the network mode to get service as well. After that the phone is fine. Does anyone know what causes this or if there's any way to resolve it or if that is purely on CM's end? When using the previous 10.1 nightlies (specifically 8/7/13) I don't have this problem, but when moving to this RC and the 10.2 nightlies (september 5) I still have the issue despite a full wipe (data, system...) before flashing each ROM. Don't have this issue with sense-based roms though.
Vember31 said:
I have this same issue with the RC1 and have been changing the network mode to get service as well. After that the phone is fine. Does anyone know what causes this or if there's any way to resolve it or if that is purely on CM's end? When using the previous 10.1 nightlies (specifically 8/7/13) I don't have this problem, but when moving to this RC and the 10.2 nightlies (september 5) I still have the issue despite a full wipe (data, system...) before flashing each ROM. Don't have this issue with sense-based roms though.
Click to expand...
Click to collapse
Hey guys I found a permanent fix for this. Check this link out: http://forum.xda-developers.com/showpost.php?p=45127419&postcount=942
mrinehart93 said:
Hey guys I found a permanent fix for this. Check this link out: http://forum.xda-developers.com/showpost.php?p=45127419&postcount=942
Click to expand...
Click to collapse
thanks so much!!! :good: this worked for me. just a heads up though - I accidentally tried this with the cm10.2 nightlies first (despite the fact that this problem exists with those nightlies too) and it ended up causing an error (com.android something continuously popping up...) but this fixed the signal problem after restart with the 10.1.3 RC2 rom.
much appreciated!