[HELP] Stuck at sony ericsson logo - XPERIA X8 Q&A, Help & Troubleshooting

When i'm starting x8 i stuck at sony ericsson logo.
I tried everything but i can't pass it.
Please help.

yurma3 said:
When i'm starting x8 i stuck at sony ericsson logo.
I tried everything but i can't pass it.
Please help.
Click to expand...
Click to collapse
You ddint try everything if you cant pass through it. Use the XDA search button or check the stickies in the General Forum or in the development check on how to Unbrick x8. Works everytime
Sent using Aerodynamics

similar problem
I have the same problem ! sorry if I am spamming your request, but I think that's better than to make another n00b thread :angel:.
so in my case, I installed a wrong ROM (there was two variants), tested softwares like flashtool without any real result. I only need to restore my lovely phone with the default ROM, then I can flash it again, thanks.
edit: didn't read the previous post (was writing). so it should be the same thing for me cause I am really null in those stuff.

Download flash tool and X8 ftf file then search for steps on what to do. Or use pc companion
Sent from my X8 using xda app-developers app

ANTICHRISTUS REX said:
I have the same problem ! sorry if I am spamming your request, but I think that's better than to make another n00b thread :angel:.
so in my case, I installed a wrong ROM (there was two variants), tested softwares like flashtool without any real result. I only need to restore my lovely phone with the default ROM, then I can flash it again, thanks.
edit: didn't read the previous post (was writing). so it should be the same thing for me cause I am really null in those stuff.
Click to expand...
Click to collapse
if u want go back to 2.1 eclair just download the FTF file from my signature down there!
this is one of the way to unbrick the phone
- copy paste the ftf file to flashtool/firmware
- choose flashmode on flashtool
- turn off x8 , plug it with hold back button
- waallaahhh! Done

as I already said, I used flashtool but without the original ROM (I am noob). but now it's working finelly. how ?
after installing flashtool, it was asking for drivers, even if they are already installed. so I installed all the drivers, for all the available phones .
retryting again and again, same problem. drivers are missed.
but I don't know how, it worked in the last attempt, and my phone is flashed with the original ROM.
thanks a lot :good: !

ANTICHRISTUS REX said:
as I already said, I used flashtool but without the original ROM (I am noob). but now it's working finelly. how ?
after installing flashtool, it was asking for drivers, even if they are already installed. so I installed all the drivers, for all the available phones .
retryting again and again, same problem. drivers are missed.
but I don't know how, it worked in the last attempt, and my phone is flashed with the original ROM.
thanks a lot :good: !
Click to expand...
Click to collapse
well done dude!
some people forget to install x8 Driver, gordon gates, and flashtool/driver

And dont forget to clear data and cache before flashing any kernel to prevent bootloops
Sent using Aerodynamics

Related

[Q] How to fix my x8

Heya guys,
Today after rooting my phone, i dled a ROM and i flashed it.
After i flashed it i rebooted it, and now its stuck at the bootscreen with Sony Ericsson. I cant open xRecovery, and i cant do anything. Does anyone have any ideas on how to fix it ?
Get Flashtool and the Stock ROM FTF and flash back to Stock.
Root, inject xRecovery, or use X8Toolbox for DualRecovery, and try again.
Since this question comes up almost daily simply search this forum, the procedure has now been outlined for infinite+1 times.
B.Jay said:
Get Flashtool and the Stock ROM FTF and flash back to Stock.
Root, inject xRecovery, or use X8Toolbox for DualRecovery, and try again.
Since this question comes up almost daily simply search this forum, the procedure has now been outlined for infinite+1 times.
Click to expand...
Click to collapse
BTW where do i find a stock ROM FTF cuz the ones there are in the android dev forum the links are broken
Click the link in my signature and look into the "Sony Ericsson" folder.
Download the 2.1.1.C.0.0 7z
B.Jay said:
Click the link in my signature and look into the "Sony Ericsson" folder.
Download the 2.1.1.C.0.0 7z
Click to expand...
Click to collapse
Thanks mate, your a life saver. If it wasn't for you my dad would have killed me
Supremeacy said:
Thanks mate, your a life saver. If it wasn't for you my dad would have killed me
Click to expand...
Click to collapse
No problem, glad the stuff I collected over time now comes in handy after MultiUpload bit the dust (though enough valuable stuff has been lost).

[Q] Hard Bricked phone after Busybox update

Hi everybody, this is my first post here, I am very happy to be here, joining in this community.
When I tried to update the busybox binary to the latest version 1.19X (FroyoPro 2.5) I hard bricked my phone.
The Rom loads up but after that my phone doesn't work (an endless number of error messages appears).
I cannot even start the phone in ClockworkMod or Xrecovery.
I tried to recover my phone using SEUS and FlashTool but (If I didn't do anything wrong) it still doesn't work.
Now I don't know what to do. The phone is still under warranty but it is going to expire shortly, if I ask them to fix my phone, they surely won't accept my SE because it's clear I rooted it.
Can you suggest me any solutions - a good solution would also be to make it dead - maybe with a strong power supply...
Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=1650174
Superuser_ said:
http://forum.xda-developers.com/showthread.php?t=1650174
Click to expand...
Click to collapse
Thanks, I'll try this. If it works (I hope so), I'll let you know.
Hi. It's my first time here to post too. Same thing happened to my w8. Installed busybox 1.19.3 (wanted to try supercharger), but when I rebooted I got stuck in the SE logo. Seus seems to not work anymore. Have you tried PCC? I simply flashed back to stock rom using flashtool myself. Try double checking. First time i tried i didn't install the drivers from flashtool's folder.
cascabel said:
Hi. It's my first time here to post too. Same thing happened to my w8. Installed busybox 1.19.3 (wanted to try supercharger), but when I rebooted I got stuck in the SE logo. Seus seems to not work anymore. Have you tried PCC? I simply flashed back to stock rom using flashtool myself. Try double checking. First time i tried i didn't install the drivers from flashtool's folder.
Click to expand...
Click to collapse
I think the first time I used FlashTool I didn't install the drivers. :banghead:
Today I'll try this way.
It worked, the first time I didn't install the drivers before using FlashTool.
Thank you very much.
Eeem, just reflash it with seus or if u can unlock bootloader then do that and flash custom kernel cuz custom kernels have cwm recovery built in what means u can flash many many fine roms. Hit thanx if i helped.
glad that worked.
are you still gonna update busybox? if you are pls let me know how you did it successfully without bricking! thank!
cascabel said:
glad that worked.
are you still gonna update busybox? if you are pls let me know how you did it successfully without bricking! thank!
Click to expand...
Click to collapse
At the moment I'm not going to update the busybox, if I'll succeed I'll post something on XDA or let you know via PM.
samsung xcover bricks after install busybox
everytime i run busybox free & i even bought pro it bricks my phone after reboot so i have to reflash the rom. its the latest official europe. samsung xcover gt-s5690. driving me mad. anyone any idea solution?? thanks
chuckens said:
everytime i run busybox free & i even bought pro it bricks my phone after reboot so i have to reflash the rom. its the latest official europe. samsung xcover gt-s5690. driving me mad. anyone any idea solution?? thanks
Click to expand...
Click to collapse
Dont update busybox..
Your kernel dont support it
Sent from my E15i
Gogeta said:
Dont update busybox..
Your kernel dont support it
Sent from my E15i
Click to expand...
Click to collapse
thanks for reply. on google play there are 3 different versions. 1.Robert Nediyakalaparambil 2. BusyBox ProStephen (Stericson) they both install 100% and work till i reboot and actually its not all the time i reboot... the third is BusyBox Installer JRummy Apps Inc. this one doesnt install it tells me wrong kernal.
it did not brick till i recently wipe partition&cache. it's running gingerbread on android 2.3.6. Headreck:crying:
chuckens said:
thanks for reply. on google play there are 3 different versions. 1.Robert Nediyakalaparambil 2. BusyBox ProStephen (Stericson) they both install 100% and work till i reboot and actually its not all the time i reboot... the third is BusyBox Installer JRummy Apps Inc. this one doesnt install it tells me wrong kernal.
it did not brick till i recently wipe partition&cache. it's running gingerbread on android 2.3.6. Headreck:crying:
Click to expand...
Click to collapse
Use custom kernels for your device.

[Q] Clockworkmod flashing problem

Hello Everyone,
Before proceeding, I have searched my problem, but I couldnt find an answer to it.
I am basically running GingerDX v26 on Stock Kernel, and whenever i try to install (flash) via CWM, it doesnt intalls,
I came to know about this, when I was trying to flash Sound Module by CKKnot, I didnt got the installation files in my respective directories. Furthermore, i tried flashing ICSified settings, but nothing happened.
Am I doing something wrong, or there is bug??
Please report me, and I will be really grateful to you guyzz!!!
HemdonG said:
Hello Everyone,
Before proceeding, I have searched my problem, but I couldnt find an answer to it.
I am basically running GingerDX v26 on Stock Kernel, and whenever i try to install (flash) via CWM, it doesnt intalls,
I came to know about this, when I was trying to flash Sound Module by CKKnot, I didnt got the installation files in my respective directories. Furthermore, i tried flashing ICSified settings, but nothing happened.
Am I doing something wrong, or there is bug??
Please report me, and I will be really grateful to you guyzz!!!
Click to expand...
Click to collapse
What error do you get ? Try flashing another ROM. Does the ROM flash ? I had problems flashing ICS-ified settings on my GDx v27 (I finally did it)
So probably , we shared the same problem...
Or just use X8 Toolbox to re-install recoveries.
SOLVE
hello !!
please try this rom
http://forum.xda-developers.com/showthread.php?t=1507021 :good:
everythings work i test it it's owesome:good:
@Mayank77, the roms flash ONLY when i full wipe...:crying:
and this is the reason y i cannot flash some of the flashable zip files.,
PS, it completely shows me everything as normal script, but later when I locate the directory using root explorer, I dont have the files.
I noticed this when I was flashing CKKnots sound module, it related that "delete the files from soundfx folder" later when i flashed nothing was installed!! it was clean. rebooted multiple times but no chance, again i flashed, nothing happened.
[email protected] said:
hello !!
please try this rom
http://forum.xda-developers.com/showthread.php?t=1507021 :good:
everythings work i test it it's owesome:good:
Click to expand...
Click to collapse
You should've told the OP about the kernel requirements before suggesting him that and thus leading him to a soft brick.
I am almost sure he is on stock kernel.
and that ROM is NOT for stock kernel.
Mayank77 said:
You should've told the OP about the kernel requirements before suggesting him that and thus leading him to a soft brick.
I am almost sure he is on stock kernel.
and that ROM is NOT for stock kernel.
Click to expand...
Click to collapse
I've seen him done that on at least 2 other posts.
Back on topic:
I've tried searching for threads that may help out but all i got were threads for x10, so i'm not gonna post them as i don't want you to harm your phone because of me. So let's just wait til someone who knows more tries to answer your Q, ok? I'm sorry i wasn't much help.
Will post an update if i find anything useful.
Sent from me to you
cascabel said:
I've seen him done that on at least 2 other posts.
Back on topic:
I've tried searching for threads that may help out but all i got were threads for x10, so i'm not gonna post them as i don't want you to harm your phone because of me. So let's just wait til someone who knows more tries to answer your Q, ok? I'm sorry i wasn't much help.
Will post an update if i find anything useful.
Sent from me to you
Click to expand...
Click to collapse
No prob bro!!
Btw, im surprised that the same thing doesnt happens with u guyzz???, i mean i have tried it alot, but in vain, Would updating to gdx 28b solve the problem??
HemdonG said:
No prob bro!!
Btw, im surprised that the same thing doesnt happens with u guyzz???, i mean i have tried it alot, but in vain, Would updating to gdx 28b solve the problem??
Click to expand...
Click to collapse
I rarely flash update zips.
I did have a problem with icsified settings. What i did was full wipe>flash gdx (i use v28 now), wipe again (to be safe), then flash icsified settings.
Btw my 1st post was a mistake. I was supposed to post that on a diff thread.
Sent from me to you

Xperia Z stuck on boot with pink LED after installing CWM

guys plz help me out plz
i have a xperia z c6603 model.. i have unlocked bootloader. i was installin CWM from http://www.editandroid.com/how-to-install-custom-cwm-recovery-in-sony-xperia-z-unlocked-bootloaders/
and what happened is that i was doing it and i entered the command that was fastboot flash boot boot.img... as the tutorial says that we have done it i unplugged cable and checked the recovery was installed but now im stuck on the boot as its a neverending loop and device restarts itself but does not boot normally to android.. with pink LED to start recovery
i can access recover but when i tried a lot of time and it didnt boot normaly i accepted the REBOOT SYSTEM NOW option and it had another option to fix SUPERSU which means root
plz tell me what to do im a noob plz.. the device cant even turn off other wise i wouldve use PC companion to restore phone and kindly tell me would i have root after clicking on FIX superSU which means ROOT....plzzz tell me what to do.. i know how to install custom ROm but dont know about flashing kenals or Flashtool thing plz plz tell me waht to
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
thanks for reply plz stick with me for a sec plz
kingvortex said:
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
Click to expand...
Click to collapse
Bro should i open fastboot folder and give the "fastboot flash boot boot.img" again????
plz tell me what to do...
i also have a backup of stock rom in my sd card...i did that backup right after this incident hapened to me...should i try restoring backup?
my phone can go in the fastboot mode
\
but PC companion is not restoring my phone either it say i have cutom software on it
another thing
kingvortex said:
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
Click to expand...
Click to collapse
yes you're are super RIGHT BRO... i flashed the 434 v5
plz guide me should i repeat whole process of installing CWM recovery... in the fastboot section...?
should i be using flashtool...i really dont know how to use it either...but whether that'll fix it...
is my device bricked or something??
I love you man
kingvortex said:
As you followed a guide that just ripped DooMLoRD's work from XDA, you most probably flashed the wrong kernel for your firmware, which is the cause of your problem.
Get the correct kernel from here, which is the source of the guide and files that website is using.
Click to expand...
Click to collapse
MAn You saved my life literally ILY man thanks a LOt.....
if there's anything i can do for you lemme know can i donate your website or something cux i'd really love to pal... thank you very very much
Sorry I didn't reply before. I was sleeping haha.
Happy to have helped. I don't accept donations, but you can donate to a charity of your choice if you like.
kingvortex said:
Sorry I didn't reply before. I was sleeping haha.
Happy to have helped. I don't accept donations, but you can donate to a charity of your choice if you like.
Click to expand...
Click to collapse
Somebody is in love with you King

[Q] Official rom : updates seem to be blocked

Hello, I'm trying to update a Sony Xperia Z (from the phone's menu), but for some reason, the updates don't work, as if they were blocked. From what I've been told, someone tried to root the phone using some random tutorial on the internet, ended up in a bootloop (at the SONY logo), then flashed an official rom (4.1.2 IIRC) via flashtools or a similar software to solve the bootloop. I've checked the bootloader status dialing [*#*#7378423#*#*], and it's still locked .
I don't want to risk bricking it since it's not mine, but the person who owns it really wants to be able to update it normally via the phone (very casual user, no flashing knowledge or anything), so I would be happy if someone could help me ! So, teach me Masters, what should I do ? Thanks in advance !
P.S. : if there's already a post/tutorial about that, I'm sorry but didn't find it =)
LegatoExia said:
Hello, I'm trying to update a Sony Xperia Z (from the phone's menu), but for some reason, the updates don't work, as if they were blocked. From what I've been told, someone tried to flash a custom rom, ended up in a bootloop (at the SONY logo), then flashed an official rom (4.1.2 IIRC) via flashtools or a similar software... I don't want to risk bricking it since it's not mine, but the person who owns it really wants to be able to update it normally via the phone (very casual user, no flashing knowledge or anything), so I would be happy if someone could help me ! So, teach me Masters, what should I do ? Thanks in advance !
P.S. : if there's already a post/tutorial about that, I'm sorry but didn't find it =)
Click to expand...
Click to collapse
As far as I know OTA doesn't work with unlocked bootloader (correct me, If I'm wrong).
Sony PC Companion won't work either, because your friend/you had unlocked your bootloader.
You can relock it, but it won't work either way, if you don't have TA-Backup with your DRM keys, I think
LaurynasVP said:
As far as I know OTA doesn't work with unlocked bootloader (correct me, If I'm wrong).
Sony PC Companion won't work either, because your friend/you had unlocked your bootloader.
You can relock it, but it won't work either way, if you don't have TA-Backup with your DRM keys, I think
Click to expand...
Click to collapse
Hello, and thanks for your answer ! I just talked with the person who tried to modify the phone, and actually, he didn't install a custom rom, he just tried to root the phone following some random tutorial, then ended up in a bootloop. He doesn't know if he unlocked the bootloader or not, but to solve the bootloop, he flashed an official rom via his pc (flashtools or something similar), as I said in the previous post... does that change anything ? Anyway, I'm gonna edit the OP to make things more clear.
EDIT : just checked the bootloader status by typing [*#*#7378423#*#*] in the dialer, it's NOT unlocked. =)
LegatoExia said:
Hello, and thanks for your answer ! I just talked with the person who tried to modify the phone, and actually, he didn't install a custom rom, he just tried to root the phone following some random tutorial, then ended up in a bootloop. He doesn't know if he unlocked the bootloader or not, but to solve the bootloop, he flashed an official rom via his pc (flashtools or something similar), as I said in the previous post... does that change anything ? Anyway, I'm gonna edit the OP to make things more clear.
EDIT : just checked the bootloader status by typing [*#*#7378423#*#*] in the dialer, it's NOT unlocked. =)
Click to expand...
Click to collapse
Well, that explains everything.
Firstly, you've to download Flashtool (I suggest you to read carefully the information provided in the link) and install its drivers. If you've already done it, you can proceed futher.
♦ I suggest you to go straight to the newest version (4.4.4) Generic. Here is .FTF file, which needs to be put in flashtool /firmware(s) folder (your friend should know it): Generic 4.4.4 FTF HERE
Before start, make sure you know what are you doing and it is only your responsibility.
By flashing .ftf you won't brick your device unless you'll try to flash custom kernel on locked bootloader or something like this.
If you need a tutorial which describes how to flash .ftf, then quote this message and I'll try sort this thing out with you
LaurynasVP said:
Well, that explains everything.
Firstly, you've to download Flashtool (I suggest you to read carefully the information provided in the link) and install its drivers. If you've already done it, you can proceed futher.
I suggest you to go straight to the newest version (4.4.4) Generic. Here is .FTF file, which needs to be put in flashtool /firmware(s) folder (your friend should know it): Generic 4.4.4 FTF HERE
Before start, make sure you know what are you doing and it is only your responsibility.
By flashing .ftf you won't brick your device unless you'll try to flash custom kernel on locked bootloader or something like this.
If you need a tutorial which describes how to flash .ftf, then quote this message and I'll try sort this thing out with you
Click to expand...
Click to collapse
Awesome ! Yes, indeed, if you could tell me how to do it or link me to a tutorial, that would be very appreciated ! I already have flashtools installed, but don't know the commands, or the right steps to flash something without using a recovery. Anyway, thanks for your time ^^
EDIT : I forgot to indicate that I'm running flashtools on linux, so no interface, everything has to be done with commands lines... so the tutorial in the link in your previous post can't be used with my os, I think !
LegatoExia said:
Awesome ! Yes, indeed, if you could tell me how to do it or link me to a tutorial, that would be very appreciated ! I already have flashtools installed, but don't know the commands, or the right steps to flash something without using a recovery. Anyway, thanks for your time ^^
EDIT : I forgot to indicate that I'm running flashtools on linux, so no interface, everything has to be done with commands lines... so the tutorial in the link in your previous post can't be used with my os, I think !
Click to expand...
Click to collapse
Well, I'm sorry then but I can't help you with this. I found a few links on the net, so I'm giving you one link which seems to me that it should work for you.
Tutorial?
LaurynasVP said:
Well, I'm sorry then but I can't help you with this. I found a few links on the net, so I'm giving you one link which seems to me that it should work for you.
Tutorial?
Click to expand...
Click to collapse
Don't worry, you really helped me a lot already ^^ I'll let you know if the tutorial worked. Thanks ! =)

Categories

Resources