Bad SBF - Motorola Droid and Milestone Q&A, Help & Troublesh

Hi guys!Sorry for my post but i don't know where to post.So,let's start.
First i install a sbf file from sbf room's.The process was a success.When i start the phone to look i saw i don't have the Play Store and File Manager to install a new ROM.
When i try to install the ROM i have an error:
E:Can't open /cache/recovery/command
--Install from sdcard...
Finding update package...
Opening update package...
E:failed to open /sdcard/update.zip(No such file or directory)
E:signature verification failed
Installation aborted.
I have a Motorola Milestone A853.It is rooted.
I need help because i don't want to go in service because i know we can fix this problem.This SBF is bat because the battery is go to 0% in just few hours.Sorry for my bother but i need much help.Thanks you!

You have to flash vulnerable recovery again.

Eiertschik said:
You have to flash vulnerable recovery again.
Click to expand...
Click to collapse
ok i will try

dragosneagu95 said:
ok i will try
Click to expand...
Click to collapse
I had made the root.Everything goes ok.My phone was rooted again.But the error with sd card persist.:crying:
I don't know what can I do....

Are you sure the update.zip file and "OpenRecovery" folder are on your SD card?

Eiertschik said:
Are you sure the update.zip file and "OpenRecovery" folder are on your SD card?
Click to expand...
Click to collapse
First,beause of this SBF i don't have on my phone the File Manager and Play Store.I don't see the files.Just see the memory in settings.
Second, the update.zip goes successfully. Appeared a message that my phone was successfully rooted.
I will come with somes images...mybe you will now.

dragosneagu95 said:
First,beause of this SBF i don't have on my phone the File Manager and Play Store.I don't see the files.Just see the memory in settings.
Second, the update.zip goes successfully. Appeared a message that my phone was successfully rooted.
I will come with somes images...mybe you will now.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Take a look and reply please.

Guys do you know some answers or can i go to service?

Did the apps HSTcmd, My Sign, Superuser Whitelist already come within the sbf?
If yes then you did NOT get an original sbf.

Eiertschik said:
Did the apps HSTcmd, My Sign, Superuser Whitelist already come within the sbf?
If yes then you did NOT get an original sbf.
Click to expand...
Click to collapse
no,they didn't come
but if i install a SBF over SBF i brick my phone?I tried this solution on a Defy and i bricked.Tell me please.

You can get the stock SBFs from HERE.

Erovia said:
You can get the stock SBFs from HERE.
Click to expand...
Click to collapse
Ok but who is the original SBF?
And if I install a SBF over SBF I brick my phone?

These are all original ones. You should choose the one which is closest to your mobile carrier.
I can't say for sure, but I don't see how it could brick your phone. Writing the same data over and over into the memory of your phone doesn't make any difference.

Erovia said:
These are all original ones. You should choose the one which is closest to your mobile carrier.
I can't say for sure, but I don't see how it could brick your phone. Writing the same data over and over into the memory of your phone doesn't make any difference.
Click to expand...
Click to collapse
I will try and I'll come with news

GOD Bless You!I fix the problem with yours answers,special Erovia(your guidance was great),but all members.Sorry for my raunchy style to write but I was sad.Thanks you again!:fingers-crossed:

Related

[Q] Internal sd card issue

hello, I have the Samsung Captivate and am having a problem with the internal sd card. I went to put android 2.2 froyo and everything went well said success threw odin but my phone will boot up but once it gets to the galaxy s screen it stops. I have done the update threw odin several times and I run into the same problem. I got into system recovery mode and formatted everything cause it says that there was an error in the internal sd card, and needed to be formatted so I did that. Now when I go to reinstall packages it gives me this list.
--install from sdcard...
Finding update package...
opening update package...
Verifying update package...
E: failed to open /mnt/internal_sd/update.zip (no such file on directory)
E:signature verification failed
Installation aborted
any help would be much appreciated thank you.
yeah....reinstall packages doesnt do anything unless there is a file on your sdcard called UPDATE.ZIP
what you need to do is go back into DOWNLOAD mode, not recovery mode and use ODIN.....
I did that and after everything finishes and reset comes up in the blue box the phone starts it will go threw a list and it comes to a data wipe failed in red and formatting CACHE and DBDATA then applying multi-csc, installing multi-csc. Then Install default apk files, please wait
E:Can't mount /dev/block/mmcblk0p2 (invalid argument0
E: copy_data_default_apk:cannot mount DBDATA:
your storage not prepared yet, please use UI menu for format and reboot actions.
Then I format the sdcard and go threw everything again and it does the same thing. Im trying to give all the details.
I've got the same problem with GT-i9000.
Tried to flash with pit 512 and re-partition and pit 803 with re-partition, but the problem remains.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
exactly the same problem here
anyone got the solution right?
off topic but....
@thebeast
Your posts are hard to read. I keep thinking you are throwing your phone.
threw - past tense of throw "I threw it out the window"
through - by way of "I updated through odin"
Yeah I have that problem sometimes cause I'm typing relatively fast while focusing on other Things. I also do not proof read, relying on spell check too much. Considering I was trying to explain exactly what was happening to my phone from memory and going "through" the process over and over some mistakes are bound to happen. I had my lil bro hussle an att support store and get me a new one hence why I never checked this thread.
If you are having the same problem as me you do or did Not have an update.zip file on your internal SD. You deleted it or it was removed some how so before u tried to install anything you should of put it back to stock and hopefully that would of fixed it but I do not know the solution based on the fact I never bothered fixing mine.
Sent from my SAMSUNG-SGH-I897 using XDA App
lol @ the grammar police.
Stupid question - have you tried to use ODIN to go back to stock before attempting to re-flash? ODIN usually completely wipes the phone and any of the silly issues that come up.
The problem that is encountered is using oden to update while its missing that file so it deletes and starts to install the new rom but cannot. So the phone is stuck in limbo, I tried to use the one click flash countless times left it for hours and it would never work. So maybe if you did that before u tried to put the rom it might have worked but not once the damage is done. As far as I know.
thabeast said:
The problem that is encountered is using oden to update while its missing that file so it deletes and starts to install the new rom but cannot. So the phone is stuck in limbo, I tried to use the one click flash countless times left it for hours and it would never work. So maybe if you did that before u tried to put the rom it might have worked but not once the damage is done. As far as I know.
Click to expand...
Click to collapse
I had a similar issue I think like 2 days back when I goofed up something in the framework folder. Nothing seemed to work.
So I had to revert back to stock using one click. That was the only thing that worked.
Yeah one click would not work for me at all trust me I tried that forever until I got the replacement.
Sent from my SAMSUNG-SGH-I897 using XDA App
thabeast said:
Yeah one click would not work for me at all trust me I tried that forever until I got the replacement.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Did u try going to clock work recovery and doing a "reset to factory settings"
I did and would not work. But I have a fully workout one now so maybe the Guy who is having the problem now should answer these questions lol
Sent from my SAMSUNG-SGH-I897 using XDA App

[Q] [DEV] Can someone DUMP P500 Baltic system.img

Hi, Can someone please dump/backup the system.img from baltic P500 or have a offical update for baltics. Thanks
Just do a backup and upload it. Thanks
No one here from Baltic States?
Hey, just show me how to do it, and I will give you.
hi, please use this guide: http://forum.xda-developers.com/showpost.php?p=8917870&postcount=12
or if you have Thunderg installed, then just do a backup and upload these files.
thanks
Hmm, could you be more specific? I just bought this Optimus One like two days ago, and I'm feeling very newb (it's my first Android).
What do I have to do, to give you that system.img and what is that system.img file?
Hi, the system.img a backup from Android /system partition is a main part of the android. But this guide we just dump that /system partition, it's the easiest way.
I'll try to help you do that:
1. Is your phone rooted?
If you haven't done that, then use Z4Root(super easy app ) and you can get it from here: http://www.upload.ee/files/997919/z4root.1.3.0.apk.html
Download that file and copy to sd card and install.
Open that installed app and root your phone
If you need help with that, then there is little how to here: http://www.worldofnubcraft.com/285/rooting-a-lg-optimus-one-android-phone
2. OK, rooting done, now we need terminal app: You'll find that from Market. Just search "Android Terminal Emulator" it's from Jack Palevich and install that.
3. Now open the Terminal Emulator and enter these commands without "" and hit enter after command, these 3 command should be it:
"su" it asks for a root privileges and you allow that
"cd /system"
"tar zcvf /sdcard/system-dump.tar.gz *" and wait when it finishes. it takes some time. It's done when you see #, it takes couple of minutes max.
4. That file is now on your phone SD card and upload that system-dump.tar.gz file to somewhere and let me know
Are you sure about that?
I'm sorry, but it's not working. It gives me an error "tar not found". Any ideas?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
By the way, what you can do with that file? What it contains? I'm just a newb, and I want to know everything about Android.
EDIT:
Is it possible to do that dump with Thunderg?
Go to market and install app called "BusyBox" and download / install BusyBox with this tool. After that it will work.
yes, i forgot busybox install that and give a new try
Ok guys, I got it. Before putting it live, I would like to know one thing. Does it contains any personal data, if so, what exactly? Sorry, for being so paranoid.
hi, it won't contain any of your personal data. Personal data is stored mostly on /Data partition and we didn't dump that. Thanks
Ok, so here you have it.
Optimus_One_Baltic_ROM_dump.zip - 89.2 Mb
And it's only contains branded ROM with no changes? That's great. What program do I need to restore my ROM to the branded one, if I'm going later to change it?
i think you should look to Thunderg... it's best way to make a full backup and restore after

How to install stock rom on my Desire 510 EU 64 bits

Hello all,
i was searching for a couple of days for a original rom for my phone, i think i found one but inside the downloaded zip are the files packed in .tar.gz
how do i need to install that stuff? and do my bootloader be unlocked or locked?
Thx, Grtz Marco
Addicted2Bass said:
Hello all,
i was searching for a couple of days for a original rom for my phone, i think i found one but inside the downloaded zip are the files packed in .tar.gz
how do i need to install that stuff? and do my bootloader be unlocked or locked?
Thx, Grtz Marco
Click to expand...
Click to collapse
You're not downloading the right file... It needs to be in .zip format. .tar.gz is a Linux Unix file compressed.
It seems that i only can download .tar.gz file of the htcdev site, do you know where i can find zip format files?
Addicted2Bass said:
It seems that i only can download .tar.gz file of the htcdev site, do you know where i can find zip format files?
Click to expand...
Click to collapse
Download this https://mega.co.nz/#!eU4yBAxQ!vkQP48...0jG7nO-bt-IFn0 and rename it to 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
MrMike2182 said:
Download this https://mega.co.nz/#!eU4yBAxQ!vkQP48...0jG7nO-bt-IFn0 and rename it to 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
Click to expand...
Click to collapse
i need a key to decode it?
Addicted2Bass said:
i need a key to decode it?
Click to expand...
Click to collapse
Why are you trying to decode it? You should have just downloaded it, renamed it and placed it on the SD card..
MrMike2182 said:
Why are you trying to decode it? You should have just downloaded it, renamed it and placed it on the SD card..
Click to expand...
Click to collapse
because i can't download it without that key
Addicted2Bass said:
because i can't download it without that key
Click to expand...
Click to collapse
may i have the key to download to please?
thanks for sharing
the key?
tik6111 said:
may i have the key to download to please?
thanks for sharing
Click to expand...
Click to collapse
does anyone know the the key to download the file?
strange
MrMike2182 said:
Download this https://mega.co.nz/#!eU4yBAxQ!vkQP48...0jG7nO-bt-IFn0 and rename it to 0PCVIMG.zip (the first character is a zero) and place it on the root of the sdcard. Then run adb reboot bootloader and once it boots press the power button. It should install.
Click to expand...
Click to collapse
@MrMike2182 when users click on the link to download the file they get the following message:
"Enter decryption key"
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please provide the key to allow users to download, or host on another site., EG: https://www.androidfilehost.com/

Marshmallow "Couldn't capture screenshot."

Hello All,
I have a Nexus 6 (Hence the reason I'm posting in this thread) and I am not able to take screenshots after upgrading to Marshmallow 6.0. I would think to post in the thread of the current rom I'm running but I also full wiped and tried a different rom with the same result.
Every time I try and take a screen shot it says "Couldn't capture screenshot. - Can't take screenshot due to limited storage space, or it isn't allowed by the app or your organization." I would post a screenshot of what it's doing but... well... I think you get the point. I have plenty of storage space and I have dived into the various permissions settings on 6.0 but have yet to find out how to fix it.
Has anyone else had this problem across multiple roms and no luck with screenshots?
Currently running:
Chroma Oct-10-2015
Kernel:
3.10.40-Chroma-v1.01
Go to the screenshot directory and try to manually create any file there using your usual file manager/explorer.. If that fails,.it may be that the permissions are screwed which sometimes happens when you copy sdcard data back whilst in recovery.
If that sounds like your problem, there is a zip you can flash. Do NOT use "fix permissions" in recovery.
Flash this*zip*via recovery...
http://forum.xda-developers.com/attachment.php?attachmentid=2849968&d=1405300107
Located from thread: http://forum.xda-developers.com/showthread.php?t=2239421 by @osm0sis
danarama said:
Go to the screenshot directory and try to manually create any file there using your usual file manager/explorer.. If that fails,.it may be that the permissions are screwed which sometimes happens when you copy sdcard data back whilst in recovery.
If that sounds like your problem, there is a zip you can flash. Do NOT use "fix permissions" in recovery.
Flash this*zip*via recovery...
http://forum.xda-developers.com/attachment.php?attachmentid=2849968&d=1405300107
Located from thread: http://forum.xda-developers.com/showthread.php?t=2239421 by @osm0sis
Click to expand...
Click to collapse
There was a miscellaneous file on the /sdcard/pictures folder called screenshots. I couldn't access it and I couldn't create a new folder called screenshots
Es says operations failed
Sent from my Nexus 6 using Tapatalk
mkgarrod said:
There was a miscellaneous file on the /sdcard/pictures folder called screenshots. I couldn't access it and I couldn't create a new folder called screenshots
Es says operations failed
Sent from my Nexus 6 using Tapatalk
Click to expand...
Click to collapse
Try this. Boot into TWRP select Advanced, File Manager go to /sdcard/pictures hit Select, chmod 755, confirm, reboot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
mkgarrod said:
There was a miscellaneous file on the /sdcard/pictures folder called screenshots. I couldn't access it and I couldn't create a new folder called screenshots
Es says operations failed
Click to expand...
Click to collapse
Witek_M said:
Try this. Boot into TWRP select Advanced, File Manager go to /sdcard/pictures hit Select, chmod 755, confirm, reboot.
Click to expand...
Click to collapse
Why are you still in ES? The problem isn't permissions, it's ownership. Use my zip as was suggested by @danarama.
The permissions zip worked,
As to why I was "still in ES?" I like to have an understanding of how everything works. May not be the quickest way to fix a problem, but it allows process of elimination on my side to see what specifically the issue is.
I appreciate the .zip and suggestions everyone! Thanks!
osm0sis said:
The problem isn't permissions, it's ownership. Use my zip as was suggested by @danarama.
Click to expand...
Click to collapse
@osm0sis, You are amazeballs!! Ran into this same inconvenience the last couple of days. Swyped a quick search, quite effortlessly arrrived here, where I can thank you for the fruits of your labour. And I do mean ALL of your work across XDA. I appreciate you much! ?
Take screenshot on your PC
Well, I think maybe you can try taking the screenshot of your Nexus 6 on computer. Just don't do it on the phone if it keeps failing. Android Manager can do this and save the picture on your PC.
is it working now?
You can try to rename pictures to pictures2 and reboot your phone, this was a quick solution on the oneplus one, if it works, but it's a dirty solution.

Erased all My partitions through QFIL. How to fix?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
As you can see, I accidentally erased all the partitions. I meant to just clear boot_a.
I tried recovering through these steps:
Download (https://drive.google.com/drive/folders/1WQaaM35SWiF_UbXAM8hiRB95D2CDkIEq) the backup. Unzip it to find 7 luns (0-6).
1. Open QFIL
2. Select Flat Build
3. Click load xml and select the rawprogram(#) XML that is in the lun(0-6) folder.
4. If it asks you for a patch xml, click cancel. It's not needed to flash this backup.
5. Click download
6. Repeat steps for each lun folder
I kept getting this failure message in qfil:
I'm not sure if these are even the steps to fix it. Any Idea on what I need to do to resolve this?
nasedase said:
View attachment 5786719
As you can see, I accidentally erased all the partitions. I meant to just clear boot_a.
I tried recovering through these steps:
Download (https://drive.google.com/drive/folders/1WQaaM35SWiF_UbXAM8hiRB95D2CDkIEq) the backup. Unzip it to find 7 luns (0-6).
1. Open QFIL
2. Select Flat Build
3. Click load xml and select the rawprogram(#) XML that is in the lun(0-6) folder.
4. If it asks you for a patch xml, click cancel. It's not needed to flash this backup.
5. Click download
6. Repeat steps for each lun folder
I kept getting this failure message in qfil:
View attachment 5786723
I'm not sure if these are even the steps to fix it. Any Idea on what I need to do to resolve this?
Click to expand...
Click to collapse
Yes the best thing, or easiest rather, would be to determine which partitions are needed to get lgup to work, then flash a kdz with it.
Don't remember exactly which partitions are needed, google search for that. But flash those, from that backup, one by one, think there's only like 6 partitions needed.
That's the thing about qfil, if yer not sure what yer doing, don't do it
AsItLies said:
Yes the best thing, or easiest rather, would be to determine which partitions are needed to get lgup to work, then flash a kdz with it.
Don't remember exactly which partitions are needed, google search for that. But flash those, from that backup, one by one, think there's only like 6 partitions needed.
That's the thing about qfil, if yer not sure what yer doing, don't do it
Click to expand...
Click to collapse
The problem with the backup is that I wasn't able to get them to work through QFIL. Is there another method of flashing those partitions?
nasedase said:
The problem with the backup is that I wasn't able to get them to work through QFIL. Is there another method of flashing those partitions?
Click to expand...
Click to collapse
one by one. I've done it, it's time consuming, but it can be done. And be sure to pay attention so you don't flash the wrong one to the wrong partition. If you get a message about 'data overflow', immediately cancel, that means you are trying to flash to a partition too small for the image, and you'll overwrite the partition next to it, and probably end up with a brick.

Categories

Resources