I had support for openvpn on my bionic under ICS, now with the migration to Jelly Bean I'm having issues. Same configuration, same servers. Is there a tun issue or something I may have missed. Ideas or thoughts would be appreciated.
Thanks, Eddie
For those of you who worked to provide a root path for all of us.. THANK YOU,,,
Related
Attached tun.ko for 4.1.57. Works for me with VPNC. I put it in /system/lib and the VPNC Widget can load it.
awesome!!!! i was waiting for this to be able to connect to my cisco vpn!
great post!!!
Note: network connection tracking does not work
This means that after you connect to VPNC, disconnect from VPNC, turn wifi off, and then turn wifi back on, your connection will be hosed. As a workaround, you can run the VPNC widget settings pane and retoggle wifi. This resets the network state.
thx for this tread.good job
Thanks for shared! this file working well on 1.83 too
It's working perfectly on the Brazillian version of Atrix from Claro carrier.
I really wanted the possibility of compiling other modules for my Atrix stock kernel.
I really wanted to use some volume encryption functionality... As such a tool does not exist natively for Android, I`m thinking about using some kernel functinoality such as Loop-AES, LUKS, DM-Crypt or even some userspace FS for encryption (FUSE).
So, could anyone point me where i can find the source code for the Atrix kernel to try to compile those modules for it? I really think that this could be a great thing. One of the very fews things that i miss on Full Linux.
Thanls in advance.
victorhora said:
It's working perfectly on the Brazillian version of Atrix from Claro carrier.
I really wanted the possibility of compiling other modules for my Atrix stock kernel.
I really wanted to use some volume encryption functionality... As such a tool does not exist natively for Android, I`m thinking about using some kernel functinoality such as Loop-AES, LUKS, DM-Crypt or even some userspace FS for encryption (FUSE).
So, could anyone point me where i can find the source code for the Atrix kernel to try to compile those modules for it? I really think that this could be a great thing. One of the very fews things that i miss on Full Linux.
Thanls in advance.
Click to expand...
Click to collapse
Victor, are you using the stock kernel with this or did you need to recompile it?
I'm very sorry for the looooooooooooooooong delay in the answer.
And yes i was using on the stock kernel (Claro Brazil Android 2.2). Now i'm trying to use OpenVPN on the latest 2.3.6 official rom and it's not working anymore...
I'm thinking in some workround... any ideas?
Cheers.
victorhora said:
I'm very sorry for the looooooooooooooooong delay in the answer.
And yes i was using on the stock kernel (Claro Brazil Android 2.2). Now i'm trying to use OpenVPN on the latest 2.3.6 official rom and it's not working anymore...
I'm thinking in some workround... any ideas?
Cheers.
Click to expand...
Click to collapse
The tun.ko module doesn't work, I was going to compile one for 2.3.4 (at least the stock kernel) but it seems my desktop killed itself, and I'm not going to install linux on my laptop (it seems to suck with booting from CD, and USB doesn't work... no idea why, but it works fine with Windows Discs)
Might consider using Faux's kernel, it has TUN/TAP (I've never tested though)
Hi,
Since there isn't a subforum for the Samsung Galaxy Gio (GT-S5660) yet, I couldn't help but post here instead.
I've recently updated from 2.3.3 to 2.3.4 and unfortunately, my tun.ko module no longer works. I searched hours and tried dozens of different tun.ko files to get one working under 2.3.3. However, I cannot seem to find one that will work with my new kernel.
I've tried to compile it myself in linux using a couple of guides but always got stuck somewhere in the middle. Even tried to modify the file in a hex editor so that the kernel version checks out. Alas, to no avail.
I really need a VPN connection so I can connect to the network of my company. So if anyone would be so kind of compiling a tun.ko module for my specific kernel, I would be forever greatful.
My phone specs:
Samsung Galaxy Gio (GT-S5660)
Android 2.3.4
Buildnumber GINGERBREAD.XXKQG
Kernel: 2.6.35.7-perf-CL561540 [email protected] #1
Thanks in advance
Youran said:
Hi,
Since there isn't a subforum for the Samsung Galaxy Gio (GT-S5660) yet, I couldn't help but post here instead.
I've recently updated from 2.3.3 to 2.3.4 and unfortunately, my tun.ko module no longer works. I searched hours and tried dozens of different tun.ko files to get one working under 2.3.3. However, I cannot seem to find one that will work with my new kernel.
I've tried to compile it myself in linux using a couple of guides but always got stuck somewhere in the middle. Even tried to modify the file in a hex editor so that the kernel version checks out. Alas, to no avail.
I really need a VPN connection so I can connect to the network of my company. So if anyone would be so kind of compiling a tun.ko module for my specific kernel, I would be forever greatful.
My phone specs:
Samsung Galaxy Gio (GT-S5660)
Android 2.3.4
Buildnumber GINGERBREAD.XXKQG
Kernel: 2.6.35.7-perf-CL561540 [email protected] #1
Thanks in advance
Click to expand...
Click to collapse
Up.up.up! Same problem with me, hopefully anybody can help us, thanks!
Me too!!!!!!!!
Sent from my GT-S5660 using Tapatalk 2
see here. i dont know if it helps
http://forum.xda-developers.com/showthread.php?p=20790089
Sent from my GT-I9000 using xda app-developers app
Hi folks.
Do you guys know if there is a way to make possible use of AdHoc wifi Networks on any ICS Rom?
Actually i was using Kingdroid and I was very satisfied.
But, AdHoc Enalber doens't seems to work on any ICS rooms actually.
Also if it is not possible via apps or something like this, would it be possible to revert the driver only? I guess any driver from GB could work.
Thanks anyway
Best regards,
Marcus.
Hello, everyone!
Following your guides I was able to root my mobile successfully and I'm very pleased about it. However, the current Android version is 2.3.6 and I'm unable to upgrade it, due to having CWM installed so the natural software update no longer works for me. I've read I need to put update.zip on my SD card and run it like the same process with a few other installations I've used with CWM. My problem is, I can't find 4.1.2 for S6500D anywhere, can someone help me with this problem? Or give me some insight? Kies doesn't work for me, I have the lastest version, but it always says my model doesn't support initialisation, although it does show there's a new firmware upgrade for the mobile phone.
Thanks in advance! Appreciate it.
looks like there isn't much custom roms for galaxy mini 2 . sad luck dude but keep searching though
This link may can help you, CM10 / Jelly Bean v4.1.2
keep update bro
link http://forum.xda-developers.com/showthread.php?t=2012939
Sent from my GT-S6500D | CM10
Hi there, I'm hoping someone can quickly answer what Googling cannot -
Can the AOSP Browser be put on a stock, rooted Bionic running 4.1.2? If so, I'd appreciate some info on this.
Thanks!