Hi All,
I need a help, i had install Ultimate JB XXLSZ version and it worked well. Post the XXLT update system started restarting automatically at any point of time, especially while answering calls. So i switched back to XXLSZ which was working then without any issues. Now after installing XXLSZ (after clean wipe, etc. etc as in the forum) it works but still restarts during answering calls. Can anyone help me on what needs to be done ? Last time when i installed i had installed Phliz kernel post ROM installation, but this time i have not done it. Need your suggestions if this is the issue if so link for downloading the same.
Thanks for your help.
satven21 said:
Hi All,
I need a help, i had install Ultimate JB XXLSZ version and it worked well. Post the XXLT update system started restarting automatically at any point of time, especially while answering calls. So i switched back to XXLSZ which was working then without any issues. Now after installing XXLSZ (after clean wipe, etc. etc as in the forum) it works but still restarts during answering calls. Can anyone help me on what needs to be done ? Last time when i installed i had installed Phliz kernel post ROM installation, but this time i have not done it. Need your suggestions if this is the issue if so link for downloading the same.
Thanks for your help.
Click to expand...
Click to collapse
download stock rom from sammobile.com and reflash with full wipe and stay on stock kernel..
samsung galaxy note gt n7000
Mayank Chandwani said:
download stock rom from sammobile.com and reflash with full wipe and stay on stock kernel..
Click to expand...
Click to collapse
Thanks....actually i went for paranoid rom....works fine so no hardware issue. But i am missing the features of Ultimate Jelly bean over stock.....
Related
Hello All,
Since i still cannot post any comments in the DEV forum i wanted to ask few questions for the Juwe's Rom 4.3.1 developers who helped to create something almost perfect.
I am a very heavy user for the I9000 SGS and i have been trying Juwe's 4.3.1 ROM and i noticed few things.
1- The device is overheating when i am using the you tube application .
2- The battery performance is great only when you are disabling data networks , due to the nature of my work i have to keep it up at all times , and the battery drains is faster than the stock gingerbread release 2.3.3
3- Front camera is not working properly using the camera application but works perfect on video calls.
4- This is not related to this ROM in particular but i also witnessed it on the Simplyhoney v3 ROM as well - There are applications that i cannot find on the android market such as ( Whatsapp messenger , flash player , angry birds , advanced task killer , bubbles , islamic salat widget , hijri calendar ,.. )
5- Last is the arabic patch doesn't have keyboard ?! " can some one help with it please "
Note : The files stored for the TW4 is corrupted on both hotfile and deposit , please check this as well.
Yet thanks for the creators of the ROM and the team helped them it is some piece of work .
Regards,
Ahmed A Gad
I noticed that i cannot send sms anymore. I can recive allthought. Worked fine few days ago, no changes made during this time. Anyone has same problem?
Maybe problem with modem.try search posts with modem.i use juwe for 15 days not even singe force close or any bug.if you use packet data alltime ofcpurse battery will drain also on wifi.
[email protected]
I have the same problem with front camera ! thanks for posting
Wildchild6 said:
I noticed that i cannot send sms anymore. I can recive allthought. Worked fine few days ago, no changes made during this time. Anyone has same problem?
Click to expand...
Click to collapse
Re flashed XWJVH and reinstalled juwes rom, everything works again.
Boot animation loop
Hi all,
I have been a darky fan all along and decided today to try out Juwe's new rom. I followed his instructions exactly.
Previously, I was on Ficeto's JVP base rom, Dark Core 2.7.3.
I disabled voodoo lagfix, booted into Download mode and flashed stock firmware from samfirmware.com - I9000XWJVH 2.3.3
When using Odin (v1.3), I only placed the the stock firmware in PDA. I checked re-partition and used the appropriate pit file.
Then phone rebooted normally, and then I used 3-button combo to get it back into Download mode. I used Odin again to flash the CF-Root v3.2 Kernel (Re-partition UNTICKED)
Then I flash Juwe v4.3.1 (wipe) via CWM. Wipe cache + Dalvik.
everything has gone well so far, then I boot the phone and it loads Juwe's Smart Edition animation - Earth shaking animation.
However it continues to replay this boot animation forever!
I tried reflashing from the beginning multiple times and it still doesn't work! Anyone have any ideas?
Thanks,
Ahilen
Wait,tomorow juwe release new version based on jvp and i mean withot bug
hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.
abhi29021992 said:
hello,
first of all i am a new user so please no jargon's and hard words for me.
I am trying to install rocketrom V22 on my SGN
i have
PDA - N7000XXKL3
CSC - N7000DDKL1
PHONE- N7000DDKL1
i rooted my phone using Initial CF root flasher and then went into recovery mode and flashed rocket rom.
but the phone got stuck on the boot video of rocket rom.
what am i doing wrong. will i have to install other kernel before installing the rom.?
Please some one give me complete installation steps.
thnx in advance.
Click to expand...
Click to collapse
Go back in recovery, wipe data/factory reset, wipe cache and dalvik cache, reflash the rom and reboot, that should do it
it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?
abhi29021992 said:
it means it doesnt matter no what kernel i am. i can flash any rom on it.?
like i have KL3 but rocket is LA4.?
Click to expand...
Click to collapse
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up
gee2012 said:
That doesn`t matter, just wipe and reflash rocket rom as i said earlier, it will boot up
Click to expand...
Click to collapse
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?
abhi29021992 said:
thnx.. it worked out.
and if you could tell me what is the kernel for.?
and i found a theme over xda which was ics theme for cynogen mod . can i flash it on rocket rom.?
Click to expand...
Click to collapse
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.
jambamkin said:
The kernel controls the most basic parts of the phone operation such as power management.
You cannot use themes for Cyanogenmod or any other ROM other than ones that state they are for Rocket ROM.
Click to expand...
Click to collapse
Thnx ...........
Moved To Q&A
Please post all questions in the Q&A section
Hey guys i am in a mess ryt now need ur urgent help i rooted my stock ics DDLP8 Rom sucessfully and also i installed speed mod kernel v3 on it everything worked fyn now i didnt know much bt installing custom rom so i download chrack ics rom v5 it was mentioned in installation instruction not to wipe jjust wipe cache & dalvik cache if comming from rooted stock ics room i installed using CWN but after flashing when i reboot it get stuck on samsung logo the bootloop starts please help it was LPY based room does it make any difference what to do now ?? as phone cant be boot up to normal
I Tried flashing the stock rom using ODIN PC But it fails always please help guys can i factory reset it as its risky to factory reset ICS STOCK ROMS
Post your concern on chrack thread they can help you there. They know their rom.
i Am unable to post reply there as its xda policy please help me i am a noob and seriously want to get my cell back
arjun2312 said:
i Am unable to post reply there as its xda policy please help me i am a noob and seriously want to get my cell back
Click to expand...
Click to collapse
After flashing the ics stock rom again it will not boot up?
thank u dude i did flashed stock rom using odin pc can u please help me how to install paranoid to my phone
Go to paranoid thread they can explained it better by reading carefully. I just gonna gave you a warning, flash it while in gingerbread rom not in ice cream sandwich rom it will brick your phone.
? safe to flash ICS/GB if currently on stpck ICS
jonpaslim said:
After flashing the ics stock rom again it will not boot up?
Click to expand...
Click to collapse
Is it safe to flash the stock ICS if I'm currently on sotck ICS LQ2? I have similar problem(stuck at N7000 boot logo).I would be much obliged to anyone for help. My problem is posted here.
Thanks!
booki56 said:
Is it safe to flash the stock ICS if I'm currently on sotck ICS LQ2? I have similar problem(stuck at N7000 boot logo).I would be much obliged to anyone for help. My problem is posted here.
Thanks!
Click to expand...
Click to collapse
Short answer is no. All stock ics kernels are affected. Flash a safe gb kernel before flashing lq2.
Check you're other thread, there's some good info there now.
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!
Hi all,
I'm new in this forum. Now I'm already with ultimate v5.1 and want to upgrade to 4.1.2 Stock deodexed and rooted XXLSZ. I just want to make sure I can flash this rom directly in CWM with 3 wipes. Also, the Philz Kernel in ultimate v5.1 is safe, right? Hope someone can help.
Thanks.
Frankie
wannnnnabe said:
Hi all,
I'm new in this forum. Now I'm already with ultimate v5.1 and want to upgrade to 4.1.2 Stock deodexed and rooted XXLSZ. I just want to make sure I can flash this rom directly in CWM with 3 wipes. Also, the Philz Kernel in ultimate v5.1 is safe, right? Hope someone can help.
Thanks.
Frankie
Click to expand...
Click to collapse
why not use the 5.2 instead?
yes its safe,, use the option of "Clean before new rom flash" in Philz settings to completely clean the old rom.. take backups of whatever you want
jay185 said:
why not use the 5.2 instead?
Click to expand...
Click to collapse
The Note of my wife runs not smooth. Maybe installed too many apk. It's seems some issues with 5.2 and I would like to try the rom which make by eybee1970.
hi, I'm new to the forum and congratulations .. sorry my bad english ... I have a samsung galaxy s gt i 9070 advance with jelly bean stock version 4.1.2 xxlpz ... I would like to mount this fantastic rom galaxperia rom v3.0 I wanted to ask that kernel should I use? fits the cocore? thank you very much in advance ...
diabolik1178 said:
hi, I'm new to the forum and congratulations .. sorry my bad english ... I have a samsung galaxy s gt i 9070 advance with jelly bean stock version 4.1.2 xxlpz ... I would like to mount this fantastic rom galaxperia rom v3.0 I wanted to ask that kernel should I use? fits the cocore? thank you very much in advance ...
Click to expand...
Click to collapse
You can use CoCore kernel.
unable to start the phone with the galaxperia rom
phyowaiummg said:
You can use CoCore kernel.
Click to expand...
Click to collapse
hi there i rooted and installed Galaxperia v2 custom rom developed by achyut as instructed from the following thread using cwm
http://forum.xda-developers.com/show....php?t=2206406
the installation went fine and upon rebooting the phone i could only see the sony xperia logo followed by the xperia animation. i waited for nearly 1h and still there wasn't any change in the screen. PS i had cleared my cache and erased all the data prior to the installation. i tried repeating the same steps over and over for some 2-3 days and its still the same. getting stuck in the same screen. kindly help me out with this.
regards,
gokul
s advance i9070
gokulharidas said:
hi there i rooted and installed Galaxperia v2 custom rom developed by achyut as instructed from the following thread using cwm
http://forum.xda-developers.com/show....php?t=2206406
the installation went fine and upon rebooting the phone i could only see the sony xperia logo followed by the xperia animation. i waited for nearly 1h and still there wasn't any change in the screen. PS i had cleared my cache and erased all the data prior to the installation. i tried repeating the same steps over and over for some 2-3 days and its still the same. getting stuck in the same screen. kindly help me out with this.
regards,
gokul
s advance i9070
Click to expand...
Click to collapse
Look in thread on wich stockrom it was based xxlpz
Sent from my GT-I9070 using xda app-developers app