Hi all,
I've got a Nook HD+ running CM10.1 with the hybrid SD card installation (many thanks to everyone who helped develop this - it rocks! ),
and I'm having issues whenever I reboot the device.
When left alone, 9 times out of 10 it will just stay on the Cyanogenmod animation indefinitely (well 10 minutes is the most I've left it)....
It always seems to see the SD card as it never just reboots to stock (always see the Cyanogenmod boot logo) so I can get into CWM or boot the nook to stock.
The only way I seem to be able to get it to boot consistently is to boot into CWM is to re-flash the CM10.1 rom / load the converter zip and the reboot from CWM.
I've installed quick boot into CM10.1 but I've nat managed to get it to install into stock yet as I'm getting the 'Installation Blocked' message - So I'm guessing that I need to sideload that in from my PC (unless I'm missing an obvious way to install this via the stock Nook interface?)
Does everyone else have this issue?
It's not the end of the world as I'll probably only have to boot from cold if I have a crash, but it would be good to know if there are any more graceful solutions out there....?
Also, is there a way to get your PC (windows 7) to read the large partition on the SD card after it has been imaged (so you can write files to it directly)?
Thanks for you help
Macca
When it keeps getting stuck on the boot animation, try going to CWM and the advanced menu and wipe dalvik cache and see if it boots ok. If that does not work, just try flashing the converter without reflashing the CM.
To put quick boot on stock you need to root stock and add at least the extras zip so that unknown sources is authorized. But I recommend the whole gaps + extra zip. Quick boot will not work without root.
And no, there is no way for Windows to see the sdcard partition by directly inserting the card in the PC. You must leave the card in the Nook and use the USB cable.
Sent from my Nook HD+ running CM10 on Hybrid SD
leapinlar said:
When it keeps getting stuck on the boot animation, try going to CWM and the advanced menu and wipe dalvik cache and see if it boots ok. If that does not work, just try flashing the converter without reflashing the CM.
To put quick boot on stock you need to root stock and add at least the extras zip so that unknown sources is authorized. But I recommend the whole gaps + extra zip. Quick boot will not work without root.
And no, there is no way for Windows to see the sdcard partition by directly inserting the card in the PC. You must leave the card in the Nook and use the USB cable.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Thanks for the quick reply mate,
I'll try just clearing the dalvik cache next time.
Thanks for clearing up the quick boot thing - I'll root the stock later tonight.
Cheers
Paul
leapinlar said:
When it keeps getting stuck on the boot animation, try going to CWM and the advanced menu and wipe dalvik cache and see if it boots ok. If that does not work, just try flashing the converter without reflashing the CM.
To put quick boot on stock you need to root stock and add at least the extras zip so that unknown sources is authorized. But I recommend the whole gaps + extra zip. Quick boot will not work without root.
And no, there is no way for Windows to see the sdcard partition by directly inserting the card in the PC. You must leave the card in the Nook and use the USB cable.
Sent from my Nook HD+ running CM10 on Hybrid SD
Click to expand...
Click to collapse
Hello again mate,
I might need a little more help it would seem.......
I had read a reply you had posted in another thread that I should be able to just boot into CWM and flash the stock Nook ROM with your zips (even though I already have hybrid CM10.1 installed.
So - I did just that....
Before doing any of this I did do a backup in CWM
I downloaded "NookHD-HDplus-Universal-Root-rev2-(02.02.13).zip" and "NookHD-HDplus-Gapps+Extras.zip" to my internal memory, booted into CWM and Flashed both zip files (universal root rev 2 first).
When I rebooted, I forgot to hold down the nook key to boot to stock and I ended up in CM10.1 but flashing the zips above seemed to have messed around with CM10.1 as I had no apps pinned and the dialogue box asking about which launcher I wanted popped up....?
So I went back into CWM did a restore and re-flashed CM10.1 / Converter.zip's and my CM10.1 installation is now back to normal.
However, it still looks like the stock is rooted as I get the launcher dialogue box and have assess to the google app store etc...
Quick boot still won't work though as it's saying that it can't detect that the device is rooted....
So, If you managed to make it through all that - What did I do wrong and how badly have I messed my nook up?
What do I need to do to successfully root my stock?
Thanks again for your help
Macca
I might have figured it out myself now...
I didn't remove the SD card from the nook after rooting stock before rebooting out of CWM.
I've just re-rooted stock, took the SD card out and then rebooted and it took me into the rooted stock without any issues (quick boot now works as well )
CM10.1 also seems to be happy so it looks like I'm golden (it booted 1st time after quick booting out of stock)
Cheers
Macca
Related
I searched before I posted this question since I know it is a common question but I can't seem to figure out the problem with my phone.
I recently just bought it and I decided to root it. I following the instructions from wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_Nexus_One_Firmware_to_CyanogenMod When I went through the instructions, everything went through smoothly. No errors, all were complete installs but my Nexus One is stuck at the boot screen now. I waited for over 20 minutes but it wouldn't budge at all. I've done the procedure after "fastboot oem unlock" and "Flash CyanogenMod" already but it doesn't seem to make a difference. The flash that I'm currently using is the update-cm-5.0.5.1-N1-signed and gapps-passion-ERE36B-2-signed. Do you have any idea what could be wrong with it or what do you suggest any steps I should take to fixing it?
I don't think my phone is bricked since I'm able to go into Bootloader mode and Recovery.
Try a wipe and if not reflash and re wipe.
Mine is doing this too and i did exactly what OP did
Even after a wipe. Im reflashing right now
5.0.5.2 has just been released. Apparently fixes this bug. get it while it's hot.
Its still taking forever to boot. Im still watching it. What exactly do i do to do a "Wipe"?
Damn I don't have a microSD reader. =\
Is there any way to put the ROM on the microSD via Nexus One?
I'm having the same problem. This is on the recently released ATT compatible N1. I am able to go into Amon_Ra's 1.7 recovery and successfully install the V5.0.5.2 and gapps-passion-EPE54B-signed.zip but still have the same problem. Stuck on the X with the lock. I keep putting the original Rom back and doing it again after a full wipe and still have the same problem.
you dont have your usb cable? I was thinking about that too. Cause i know the nexus has its own memory internally but it doesn't show up under my computer. maybe you can push files through command prompt or something. or on linux
If you have the Amon_Ra's recovery you can do a wipe once you're in recovery.
If you made a backup of the original rom you can just put that back and boot into the original rom. once there, you can mount the usb and download it to the sdcard
you can also download the cyanogen updater from the android market and download the rom to your sdcard to install.
What did the trick for me was fresh install of Cyanogen 5.0.5 which i got to boot succesfully AND THEN use cyanogen updater to get to 5.0.5.2
jekyoo_style said:
Damn I don't have a microSD reader. =\
Is there any way to put the ROM on the microSD via Nexus One?
Click to expand...
Click to collapse
2 ways, either plug it in via usb and mount it from your notification bar on the phone, or download the rom via the web browser on your phone, then use Astro file browser(free) to move it from downloads to the root folder of your SD card, then flash from recovery.
dropshipinc said:
If you have the Amon_Ra's recovery you can do a wipe once you're in recovery.
If you made a backup of the original rom you can just put that back and boot into the original rom. once there, you can mount the usb and download it to the sdcard
you can also download the cyanogen updater from the android market and download the rom to your sdcard to install.
Click to expand...
Click to collapse
How long does it usually take to restore? I have about 18 lines of dots. Should it be taking this long?
5.0.5 first then update
Install the base 5.0.5 first then the google add on if you want the apps. After you boot like that update to the latest CM. I saw this some other place and this worked for me, don't wanna take anyone's credit.
Thanks everyone. 5.0.5.2 worked flawlessly once I was able to put it on my microSD.
If you guys don't have a MicroSD Reader, and have the AmonRA recovery, just boot to the recovery and chose I think the 3rd option (Toggle MS USB). You'll be able to see the phone as a mass storage device.
I attempted to put Phiremod onto my NC, but I formatted the boot partition so it doesn't start up. What's the easiest way to get my Nook going again?
Try using a CWR SD Card, and either flashing a nightly zip, or one of the U-Boot files floating around.
I think I just need to flash a proper boot file, which should I try for either CM7 or Phiremod?
Can anyone help me out? The sticky seems a bit outdated or maybe it's just confusing me.
I have a 2GB uSD card and I just want to try out Phiremod and the stable CM7 to see which I prefer. Do I have really have to restore to stock just to overwrite it again?
I decided to completely restore to stock firmware to see if I could get this thing to work. I downloaded the complete 1.0.1 zip, loaded it on my CWM recovery uSD card, formatted boot, system, data, and cache, flashed the recovery zip and then rebooted.... Didn't boot
I need help, what am I missing?
Follow sticky carefully, it works.
Sent from my NookColor using Tapatalk
thereddog said:
I decided to completely restore to stock firmware to see if I could get this thing to work. I downloaded the complete 1.0.1 zip, loaded it on my CWM recovery uSD card, formatted boot, system, data, and cache, flashed the recovery zip and then rebooted.... Didn't boot
I need help, what am I missing?
Click to expand...
Click to collapse
Do the 8 re-boot step. There is also a boot fix zip file or recovery zip file you can flash via your CWM SD.
I flashed the 3.2.0.8 recovery zip, but it still doesn't boot
Download this to your CWM sd card. And this. Then put in your CWM sd card, boot it up, flash the update_nc_stock_1.2.zip file, then ManualNooter. Take out the sd card and reboot. Should have stock + root.
Thank you, but I don't even want to use the B&N software. Either CM7 or Phiremod.
Can't I just repair the boot partition?
I went ahead and flashed the update-nc-stock-1.2-signed.zip then manual nooter
Took the card out and rebooted, nothing happens
Did you reboot? What do you see?
Nothing, screen doesn't come on
Help please!
Oh. Have your tried flashing this?
Where did you find that on the CM site? All I found under Nook Color were the 'update' zips
Downloading now
Ahh, it's a nightly CM7 build... I assume that it will completely format the EMMC?
Downloaded and flashed the latest nightly zip, still won't boot.........
Anyone else have any ideas I could try?
Perhaps I missed where you said you did it, but go back and take the Nook completely back to stock. I umderstand that you said you don't want to use to stock software at all, but you need to get it back to factory so you can at least boot the device.
Once you've done that, go ahead and follow the directions TO THE LETTER to load your CM7 or Phiremod.
Cliffs Notes: Trying to repair something when you can't even boot is a bit silly. Just start from square one and root. Enjoy!
So, I just got a HD+ and I was ready to try out CM10.1 emmc.
I got all the required files and such ready.
I booted into CWM sdcard, and I forgot to take a backup, and I flashed TWRP recovery. I rebooted and now when I remove the sd card, it's stuck in a boot loop.
The nook logo comes up, the screen dims after a few seconds, and then it reboots, and repeats forever.
I tried flashing stock recovery from another thread this file : http://forum.xda-developers.com/showpost.php?p=41392480&postcount=4
Still nothing.
I backed everything else up AFTER flashing recovery. So if I can just fix this, I can take a proper backup and proceed with the CM10.1 install.
Thanks
First off, if you are interested in using the emmc recovery for making backups and restores, don't use TWRP. That feature is broken in that version.
If you want to go back to stock first so you can back it up, go to my HD/HD+ CWM thread linked in my signature and get my plain stock 2.1.0 from item 6 and flash that with your bootable CWM SD. That will put everything back to stock, including recovery.
Then just start over again with your bootable CWM card. Backup, then flash the CWM emmc recovery, the CM10.1 zip and gapps, wipe data and reboot.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
First off, if you are interested in using the emmc recovery for making backups and restores, don't use TWRP. That feature is broken in that version.
If you want to go back to stock first so you can back it up, go to my HD/HD+ CWM thread linked in my signature and get my plain stock 2.1.0 from item 6 and flash that with your bootable CWM SD. That will put everything back to stock, including recovery.
Then just start over again with your bootable CWM card. Backup, then flash the CWM emmc recovery, the CM10.1 zip and gapps, wipe data and reboot.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Nevermind, I just tried something and it worked. (Complete accident btw didn't know what I was doing)
I long pressed hom button while it was booting, and the Adobe disclaimer from the bottom dissapeared a blue bar started loading under the Nook logo. It loaded twice and then it booted up
Any idea what just happened?
prabhjan said:
Nevermind, I just tried something and it worked. (Complete accident btw didn't know what I was doing)
I long pressed hom button while it was booting, and the Adobe disclaimer from the bottom dissapeared a blue bar started loading under the Nook logo. It loaded twice and then it booted up
Any idea what just happened?
Click to expand...
Click to collapse
Yes, you booted into stock recovery it repaired itself.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Yes, you booted into stock recovery it repaired itself.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Oh, cool. Well it appears to have been factory reset, and it seems to have gone down to 2.0.0 or something (even though it came with 2.1.0 out of the box). Now it's running 2.0.6. It told me that 2.1.0 is available to update, and I started it. But it doesn't appear to be moving forward. Will come back on the status of that in a bit again.
prabhjan said:
Oh, cool. Well it appears to have been factory reset, and it seems to have gone down to 2.0.0 or something (even though it came with 2.1.0 out of the box). Now it's running 2.0.6. It told me that 2.1.0 is available to update, and I started it. But it doesn't appear to be moving forward. Will come back on the status of that in a bit again.
Click to expand...
Click to collapse
Yes that is how it repairs itself. But it needs the stock recovery to do that. Once you put that back, it took over and proceeded to reset itself.
Just let it do its thing.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Yes that is how it repairs itself. But it needs the stock recovery to do that. Once you put that back, it took over and proceeded to reset itself.
Just let it do its thing.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Sweet. Okay, I'm back to how it was when I first bought it. Going to put CM10.1 now.
Okay, so I need to take a backup first, then flash CWM, CM10.1, and then GApps. That's it right?
prabhjan said:
Sweet. Okay, I'm back to how it was when I first bought it. Going to put CM10.1 now.
Okay, so I need to take a backup first, then flash CWM, CM10.1, and then GApps. That's it right?
Click to expand...
Click to collapse
Yes. Then wipe data/factory reset.
Sent from my Nook HD+ running CM10.1 on emmc.
Okay, btw. I took the backup, and I selected reboot, before I proceeded with the flashing.
It asked me if I should flash stock recovery and if I should enable root access (I selected no for both as selecting yes was the cause of the problem before)
prabhjan said:
Okay, btw. I took the backup, and I selected reboot, before I proceeded with the flashing.
It asked me if I should flash stock recovery and if I should enable root access (I selected no for both as selecting yes was the cause of the problem before)
Click to expand...
Click to collapse
Why did you reboot?
You lost me on that last statement. What asked if you should enable root access? Something in stock?
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Why did you reboot?
You lost me on that last statement. What asked if you should enable root access? Something in stock?
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Okay basically. I made two SD cards with CWM. One which I'll leave as a permanent backup card, and another with the other packages (it kept formatting to 856MB after I made it a bootable card no matter how big the actual card is, and so I couldnt fit both the backup and the CM10.1+Gapps zips on a single card)
I first made the backup on one card, and I hit reboot system, to swap it for the other one.
But when I pressed reboot, it asked me this:
ROM may flash stock recovery on boot. Fix?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes- Disable recovery flash
-No
-No
-No
I hit no.
Then it followed up with this:
Root access is missing. Root Device?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes - Root device (/system/xbin/su)
-No
-No
-No
I hit no for this too, since it didn't quite make sense.
So yeah. I'm pretty confused. Never ran into anything like that before on other devices.
prabhjan said:
Okay basically. I made two SD cards with CWM. One which I'll leave as a permanent backup card, and another with the other packages (it kept formatting to 856MB after I made it a bootable card no matter how big the actual card is, and so I couldnt fit both the backup and the CM10.1+Gapps zips on a single card)
I first made the backup on one card, and I hit reboot system, to swap it for the other one.
But when I pressed reboot, it asked me this:
ROM may flash stock recovery on boot. Fix?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes- Disable recovery flash
-No
-No
-No
I hit no.
Then it followed up with this:
Root access is missing. Root Device?
THIS CAN NOT BE UNDONE.
-No
-No
-No
-No
-No
-No
-No
-Yes - Root device (/system/xbin/su)
-No
-No
-No
I hit no for this too, since it didn't quite make sense.
So yeah. I'm pretty confused. Never ran into anything like that before on other devices.
Click to expand...
Click to collapse
Go to my HD/HD+ CWM thread linked in my signature. See item 1a. There is a new procedure to make a bootable CWM SD on any size card. I suggest you use that. Then you have room for backups and zips. My card works equally well with verygreen's, but is bigger. You may have to use SDFormatter with size adjustment like I say in the thread to get your full size back from the verygreen SD.
Those CWM messages are harmless, just keep saying no. My cards give the first message, but I have never seen the second one before.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
Go to my HD/HD+ CWM thread linked in my signature. See item 1a. There is a new procedure to make a bootable CWM SD on any size card. I suggest you use that. Then you have room for backups and zips. My card works equally well with verygreen's, but is bigger. You may have to use SDFormatter with size adjustment like I say in the thread to get your full size back from the verygreen SD.
Those CWM messages are harmless, just keep saying no. My cards give the first message, but I have never seen the second one before.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks, I finished installing CM10.1.
But there seems to be a bit of lag. When I tried it with the SD card boot (not emmc), I assumed that it was slow because of the SD card. But it's the same even on this. Anyway to speed things up?
prabhjan said:
Thanks, I finished installing CM10.1.
But there seems to be a bit of lag. When I tried it with the SD card boot (not emmc), I assumed that it was slow because of the SD card. But it's the same even on this. Anyway to speed things up?
Click to expand...
Click to collapse
You need to ask those kinds of questions on verygreen's thread.
Sent from my Nook HD+ running CM10.1 on emmc.
I'm in recovery bootloop hell!
I just received my Nook HD+ yesterday and immediately tried to root it using the Nook HD+ for dummies thread.
I used NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13) for my bootable SD card.
I added these files cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip
cwm-recovery-ovation-2.zip
gapps-jb-20130301-signed.zip
(also used twrp on the first attempt but read about not being fully functional so I stopped using it)
I made a backup of the original ROM which I already registered with B&N.
Booted into CWM recovery and proceeded to wipe data/factory reset, flash cwm-recovery-ovation-2.zip, cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip, and gapps-jb-20130301-signed.zip in that order. Eject sd card and reboot.
Now all I get is four reboots and it goes back to CMW recovery everytime. I can restore back to stock (thankfully) if I want to but I really want to get this working. You think my partition 2 is damaged and needs repair?
Any help will be deeply appreciated!
BR
blackrain74 said:
I just received my Nook HD+ yesterday and immediately tried to root it using the Nook HD+ for dummies thread.
I used NookHDplus-bootable-CWM-6028-for-stock-4GB-rev4-(05.15.13) for my bootable SD card.
I added these files cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip
cwm-recovery-ovation-2.zip
gapps-jb-20130301-signed.zip
(also used twrp on the first attempt but read about not being fully functional so I stopped using it)
I made a backup of the original ROM which I already registered with B&N.
Booted into CWM recovery and proceeded to wipe data/factory reset, flash cwm-recovery-ovation-2.zip, cm-10.1-20130630-UNOFFICIAL-ovation-emmc.zip, and gapps-jb-20130301-signed.zip in that order. Eject sd card and reboot.
Now all I get is four reboots and it goes back to CMW recovery everytime. I can restore back to stock (thankfully) if I want to but I really want to get this working. You think my partition 2 is damaged and needs repair?
Any help will be deeply appreciated!
BR
Click to expand...
Click to collapse
No, the partition 2 repair thing is for the Nook Color. I recommend redownloading the CM10.1 zip and try flashing again.
Sent from my Nook HD+ running CM10.1 on emmc.
leapinlar said:
No, the partition 2 repair thing is for the Nook Color. I recommend redownloading the CM10.1 zip and try flashing again.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
That did the trick!!! Wow, I even downloaded the file twice and it was corrupt!!! Third time was a charm!!! Development is way ahead on the HD + compared to the Fire 8.9! Thanks for the quick response!
leapinlar said:
If you want to go back to stock first so you can back it up, go to my HD/HD+ CWM thread linked in my signature and get my plain stock 2.1.0 from item 6 and flash that with your bootable CWM SD. That will put everything back to stock, including recovery.
Then just start over again with your bootable CWM card. Backup, then flash the CWM emmc recovery, the CM10.1 zip and gapps, wipe data and reboot.
Sent from my Nook HD+ running CM10.1 on emmc.
Click to expand...
Click to collapse
Thanks for putting up this file. Great use in future if something gets bonked.
Back in May I got a nook HD+ and installed the latest nightly build very easily to SD card. Lately its been kinda slow and wanted to install 10.1.3-RC2. First, I took out the working card and used a new one (backup purposes). First I downloaded cm-10.1.30RC2-ovation.zip with the nook to the downloads folder. With the new card I used win32diskimager to image sdcard-only sdcard-cwm-ovation-sdv1.img.zip. I installed it like I did back in May and Im not sure what happened but I did something wrong and if I leave the card in to boot, it goes to CWM v6.0.3.2. If I take the card out it just hangs at the cyanogen circle just keeps going around forever. I can't get back to the stock nook os at all (although I dont ever want to use the stock nook os anyways).
I re-imaged two cards with a fresh download of the files and still having problems. I tried wiping the data/factory reset and wite cache partition then reinstall cyanogen for something to try, but same results. I also tried the a hybrid install using sdcard-cwm-ovation-hybridv3.zip but same results.
Good thing is that the original card I made back in May still works same as always (however when I use it after re-trying to install 10.1.3 a screen comes up "android is updating optimizing app XXX of 227)-only for the first time after trying a reinstall.
Im not sure what I did. Any ideas for something to try?
The problem is that rc2 is for installing on internal memory and you are trying to install it to SD. So instead of installing to SD, it installed it to internal memory and messed up stock.
To fix it, first download one of my plain stock ROM zips from my HD/HD+ CWM thread linked in my signature. See item 6. Then burn a new image for emmc CWM (get it at that same thread) to one of your new SDs and boot to that. It will say the CWM is for stock in the title. Flash that plain stock ROM, followed by a factory reset. Then you should be ok.
If you want to update your SD install, you must pick a ROM zip from the SD thread.
Sent from my Nook HD+ running CM10.1 on emmc.
Thank you. I got it working.
My Nook HD+ keeps rebooting to my EMMC recovery (currently CWM 6.0.4.6) no matter what I try. It all started with a botched CM11 install from a while back. Since then I've tried installing CM11 M8 and CM10 RC2 through both the emmc recovery and the bootable sd card recovery. Even when the install goes smoothly, my Nook will just reboot back into whichever recovery I have installed.
Not sure what the problem is but would really appreciate any help. Thanks!
riceknight said:
My Nook HD+ keeps rebooting to my EMMC recovery (currently CWM 6.0.4.6) no matter what I try. It all started with a botched CM11 install from a while back. Since then I've tried installing CM11 M8 and CM10 RC2 through both the emmc recovery and the bootable sd card recovery. Even when the install goes smoothly, my Nook will just reboot back into whichever recovery I have installed.
Not sure what the problem is but would really appreciate any help. Thanks!
Click to expand...
Click to collapse
You need to go to my HD/HD+ CWM thread linked in my signature and make a new bootable CWM SD per item 1a and use that to flash a plain stock zip from item 6, followed by a system reset with CWM. That should get you going again and you can start over.
Sent from my SM-T900 using XDA Premium HD app
I got the similar problem on my nook hd (version : CM10.1). Someday, it automatically upgraded and i interrupt it, then a tragedy comes. It always get into cyanboot and recovery 6.0.4.6 when i rebooted. And i try flash newer CM, but it always reboot. Then i try many ways during several days.
When i just wanted to give up, the miracle showed. My nook was connected on PC with internet, the screen is stuck on cyanboot as usually. Then new screen pop up to ask me set language.
I quickly flash recovery, CM11 and google market. In this time, recovery 6.0.4.6 was worked but i didn't why and how. BUT when i reboot it, it still went into cyanboot and recovery 6.0.4.6. In recovery menu, i try advanced-->reboot to bootloader. Yes, i got into new CM11 :crying:
Now, although my nook get into recovery 6.0.4.6 when it rebooted, but tap advanced-->reboot to bootloader, which get 100% into CM11.
It really a tough work, and i still don't know how i solve it~~
See this thread http://forum.xda-developers.com/showthread.php?t=1444630 for an explanation of one common (but not the only possible) cause of the "recovery boot loop" problem. Although it was written for the Nook Tablet, the same mechanism also applies to the Nook Color, Nook HD/HD+.
For the Nook Tablet (not HD/HD+), there is a flashable_fix_bootloop.zip created by XDA developer succulent (and posted at his Blog http://iamafanof.wordpress.com/2013...-1-jellybean-sdcard-img-for-nook-tablet-0110/) that can be flashed (using CWM/TWRP) to reset the two files BCB and BootCnt and thereby getting the NT out of the recovery boot loop condition; with a little tweak this tool can be adapted for use with another Nook device type such as HD or HD+.