Related
Hi. I am in the UK and have the first gen moto x. i was dicking around with roms etc and i ended up accidentally erasing internal storage. I managed to the get the phone back to how it was apart from the fact that it cannot make calls, text, get 3g signal. it is essentially a small tablet. when i use the dialler code to show the imei number it is 0. i tried reinstalling modems etc and none have worked. i have tried differnet roms and even flashing lollipop. I am wondering if the modems files i am using are not working because they are US files and I need some kind of EU file? Idk.
I had my imei written down so i was going to try and change it to that on the phone but engineer tools does not open or even seem to exist on the phone. i cant try using the stock rom etc because it is on a site (something like sbf developers ) that says it is forbidden. i literally have tried everything. can anyone help? :crying:
azerouz said:
Hi. I am in the UK and have the first gen moto x. i was dicking around with roms etc and i ended up accidentally erasing internal storage. I managed to the get the phone back to how it was apart from the fact that it cannot make calls, text, get 3g signal. it is essentially a small tablet. when i use the dialler code to show the imei number it is 0. i tried reinstalling modems etc and none have worked. i have tried differnet roms and even flashing lollipop. I am wondering if the modems files i am using are not working because they are US files and I need some kind of EU file? Idk.
I had my imei written down so i was going to try and change it to that on the phone but engineer tools does not open or even seem to exist on the phone. i cant try using the stock rom etc because it is on a site (something like sbf developers ) that says it is forbidden. i literally have tried everything. can anyone help? :crying:
Click to expand...
Click to collapse
Hey! If you've installed a US ROM, you are using the wrong baseband files to access your service provider network ( XT1053- US ; XT1052- UK)
Try installing an XT1052 based rom and report back . Also, be careful while flashing your new chosen ROM. Ensure that it does not downgrade / modify your current bootloader as you may end up bricking your phone (since you've upgraded to LP)
Best of luck mate .
Bhargav4591 said:
Hey! If you've installed a US ROM, you are using the wrong baseband files to access your service provider network ( XT1053- US ; XT1052- UK)
Try installing an XT1052 based rom and report back . Also, be careful while flashing your new chosen ROM. Ensure that it does not downgrade / modify your current bootloader as you may end up bricking your phone (since you've upgraded to LP)
Best of luck mate .
Click to expand...
Click to collapse
Ty for the reply. I just tried flashing a rom for the 52 instead of the 53 and twrp gives an error message of "This package is for the device: xt1052 ghost, xt1052 ghost etc.. this device is ." the etc is just a couple more models but the device doesnt seem to know what it is? its saying becuase it is for the 52 it cannot install even though the device is the 52.
azerouz said:
Ty for the reply. I just tried flashing a rom for the 52 instead of the 53 and twrp gives an error message of "This package is for the device: xt1052 ghost, xt1052 ghost etc.. this device is ." the etc is just a couple more models but the device doesnt seem to know what it is? its saying becuase it is for the 52 it cannot install even though the device is the 52.
Click to expand...
Click to collapse
Strange . Do elaborate as to what rom you are flashing and which rom you are currently using (The one that has a problem).
Also, are you wiping the system before flashing ?
Bhargav4591 said:
Strange . Do elaborate as to what rom you are flashing and which rom you are currently using (The one that has a problem).
Also, are you wiping the system before flashing ?
Click to expand...
Click to collapse
Hi again. i googled xt1052 rom and found a few. the one i tried was cyanhacker(obviously based on cm). after i got that error i tried editing the updater script to skip over the process in which it checks what device it is on. after that it appeared to flash successfully but when i tried to boot it showed the bootloader unlocked screen, vibrated then restarted and just kept doing that bootloop.
azerouz said:
Hi again. i googled xt1052 rom and found a few. the one i tried was cyanhacker(obviously based on cm). after i got that error i tried editing the updater script to skip over the process in which it checks what device it is on. after that it appeared to flash successfully but when i tried to boot it showed the bootloader unlocked screen, vibrated then restarted and just kept doing that bootloop.
Click to expand...
Click to collapse
1. Please download the correct ROM for your device from here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628
2. Head over here: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515 and follow the Instructions. CAUTION: If you decide yourself for manual flashing DO NOT PASTE THIS CODE:
Code:
fastboot oem config carrier vzw
Or you'll end up, like me: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
In case I could help you with some guidance, I would be happy, if you could help me, in my thread.
//EDIT: Your battery should be on 70% or more, before you try to do anything! Keep this in mind, else flashing could be interrupted!
Kind regards
Xanthales said:
1. Please download the correct ROM for your device from here: http://forum.xda-developers.com/moto-x/general/official-collection-firmwares-fxz-sbf-t3146628
2. Head over here: http://forum.xda-developers.com/moto-x/general/guide-moto-x-return-to-100-stock-using-t2446515 and follow the Instructions. CAUTION: If you decide yourself for manual flashing DO NOT PASTE THIS CODE:
Code:
fastboot oem config carrier vzw
Or you'll end up, like me: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
In case I could help you with some guidance, I would be happy, if you could help me, in my thread.
//EDIT: Your battery should be on 70% or more, before you try to do anything! Keep this in mind, else flashing could be interrupted!
Kind regards
Click to expand...
Click to collapse
Thankyou so much. did what you said. tinkered in twrp. flashed a lollipop rom and made a call. My man right here <3
azerouz said:
Thankyou so much. did what you said. tinkered in twrp. flashed a lollipop rom and made a call. My man right here <3
Click to expand...
Click to collapse
No problem, im glad to hear, that I could help you!
Maybe you can help me here?: http://forum.xda-developers.com/moto-x/moto-x-qa/carrier-retail-devices-t3174988
This would be awesome, if you got a retail device!
Hey,
So i used the SRK tool to try and root my VIE-L09C40 (P9 Plus)
Something seemed to happended during the rooting procedure and when i entered e-recovery it said it had to Download a new version, but couldnt connect to internet via wifi.
Any ways it seemed to work after a while but now i have no keyboard at all, so i cant literally start my phone.
it starts, boots the EMUI 5.0 logo and goes through the information a terms, i click the ok button and thats fine.
Next it tells me to sign in to my wifi, i select my wifi and when i go to type the password all i have is google voice as a keyboard, ive searched and searched but cannot find a way around it, also the frp has tripped on phone so i cannot log in to my google account without a keyboard.
How can i get around this?
do i have to flash parts of firmware?
any help would be great, i sent it away to hauwei and they say warranty void due to software!, can only assume something wrong was flashed?
Waiting for phone to be returned now, please help
I had the exact same issue last night as well. No keyboard and only an option to enter details with voice.
Ended up with an essentially bricked phone. Couldn't find any info on the problem online, so I have to improvise.
I'm starting from scratch after formatting etc. using stock oeminfo, recovery and rolling back to Marshmallow. (fingers crossed ADB will let me, because it was giving me errors before)
Will let you know if I'm successful and the steps I took.
=====================
tolerant said:
Hey,
So i used the SRK tool to try and root my VIE-L09C40 (P9 Plus)
Something seemed to happended during the rooting procedure and when i entered e-recovery it said it had to Download a new version, but couldnt connect to internet via wifi.
Any ways it seemed to work after a while but now i have no keyboard at all, so i cant literally start my phone.
it starts, boots the EMUI 5.0 logo and goes through the information a terms, i click the ok button and thats fine.
Next it tells me to sign in to my wifi, i select my wifi and when i go to type the password all i have is google voice as a keyboard, ive searched and searched but cannot find a way around it, also the frp has tripped on phone so i cannot log in to my google account without a keyboard.
How can i get around this?
do i have to flash parts of firmware?
any help would be great, i sent it away to hauwei and they say warranty void due to software!, can only assume something wrong was flashed?
Waiting for phone to be returned now, please help
Click to expand...
Click to collapse
dmccort said:
I had the exact same issue last night as well. No keyboard and only an option to enter details with voice.
Ended up with an essentially bricked phone. Couldn't find any info on the problem online, so I have to improvise.
I'm starting from scratch after formatting etc. using stock oeminfo, recovery and rolling back to Marshmallow. (fingers crossed ADB will let me, because it was giving me errors before)
Will let you know if I'm successful and the steps I took.
=====================
Click to expand...
Click to collapse
Good luck, i did read that it might be possible to install the base firmware back to it and then update again.
Im sure we are not the only people this has happened to and if you succesfully do this, maybe consider making a full step by step guide so to help others.
Fingers crossed
:good:
Will do my best.. So far it's been a major. I've managed to flash a working stock ROM and boot up. But there are a few things to smooth out. Such as, I have no IMEI number now and the build is C900, also the bootloader is modified.
To get it to boot I had to use DC- Phoenix to flash a factory firmware(Chinese) which I had to pay for. Then I flashed a stock vie-l09c432b181 ROM over the top.
To repair the IMEI I'll have to use HCU, which I'll have to pay for as well. But that's ok. If I can get my original IMEI back, I can use the original unlock code I got earlier this year, otherwise I'll have to get a new one based on a new IMEI.
I can repair the bootloader and region code using twrp etc. so that's not a problem.
I'm actually using the phone to write his reply, so I can at least use it.
Once I have it all 100% working I'll try to put together a full step by step.
Cheers.
Well, I have a working phone. But, it'snot stable. Having trouble with mobile connection, sms, mms, 4g etc not staying connected. So wont be doing any write-ups just yet.
Not until it's stable.
I'm wanting to return it to complete stock now. And that requires trying to find an oeminfo file for C706 (New Zealand).
Will add more as I get there. Sorry.
I had the same problems. All I did is updated the phone with the firmware you want via Twrp . Be warned that it will replace the recovery back to stock. Also clear the cache and etc.
I had a similar issue with SRK tool, bootlooping, won't flash new firmwares, lost all the stock apps and diagnostic tools.
I'm now stuck on a TEST-KEYS build with no NFC or Bluetooth.
My solution was to throw the piece of junk in a drawer, forget about it and I went and bought a Pixel XL instead - a phone that is properly supported and gets updates quickly.
After much messing and a headache I finally got to c432b370
And everything back to normal
tolerant said:
After much messing and a headache I finally got to c432b370
And everything back to normal
Click to expand...
Click to collapse
How did you succeed?
I am stuck on TEST-KEYS but I am not able to flash other roms on it. When I go to recovery, the update process stops after a while
Sent from my VIE-L09 using Tapatalk
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
iantechie1979 said:
Ive had this problem for ages and tried everything i can think of. hopefully by now someone has experienced the same problem and solved it.
*My phone is stuck on honor boot logo
*i can access e-recovery
*i can access stock recovery
*i can access fastboot and device is recognised on my laptop
* i can wipe cache and factory reset successully and have done many times
*i can and have used the dload (3 button method) to flash stock rom successfully
Now the problem is that although i have flashed the earliest stock rom NEM-L51C432B102 it fails saying incorrect package!!!i think this is because my phone came with B103 or B104 and you can only flash from what your phone originally had and up.
I have flashed NEM-L51C432b120 and also NEM-L51C432b130 and although it says successful it reboots and remains stuck on honor boot logo!
I have entered fastboot and i can issue commands but they all fail saying REMOTE COMMAND NOT ALLOWED.
I can't use ADB because it doesn't recognise my device. Obviously ADB and FASTBOOT wont work because i can't access developper options and select enable USB debugging or OEM Unlock because the phone is stuck on honor boot logo.
Also my bootloader must be locked. I have the unlock code but i can't issue the command FASTBOOT OEM UNLOCK XXXXXXXXXXXXXXX because as mentioned before it says FAILED REMOTE COMMAND NOT ALLOWED.
I have even tried flashing rollback packages(there isnt one for NEM-L51)for other models, followed by flashing stock rom for my model device.
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
iantechie1979 said:
When i bought the phone it came with either the B103 or B104 package but after months of searching i can't find on the internet.
Is my phone a lost cause??? is it hard bricked? So i am praying that there is a guru out there who can solve this very strange problem.
Many thanks in advance.
Click to expand...
Click to collapse
Flash these files and it should, most probably, be fine.
use dload method as given here- https://forum.xda-developers.com/showpost.php?p=73954487&postcount=240
as there are many different opinions on this method of using only update.app file but thats not true and it should be all the files.
Main file - http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1165/g104/v71812/f1/full/update.zip
Data file- http://update.hicloud.com:8180/TDS/...1812/f1/full/hw/eu/update_data_full_hw_eu.zip
Flash both the files in order. 1st file will restore your system but then you need to have 2nd file so that apps are installed and all working fine.
After 1st file, it may reboot on its own and stuck on honor logo, reboot to recovery and then do factory reset, it will be fine.
Then let it boot to set up. Dont set your phone. Shutdown and flash the 2nd file.
boot and set up.
Good luck. Please provide feedback once done. In case of further issue, let me know and will dig more into this.
Oh this is hard.
chrisleLP said:
Oh this is hard.
Click to expand...
Click to collapse
What is hard?
shashank1320 said:
What is hard?
Click to expand...
Click to collapse
This problem.
chrisleLP said:
This problem.
Click to expand...
Click to collapse
you cant follow simple instructions? you shouldnt be on this forum if youre not ready to lose data or brick your device.
Thanks for your input so far people. Much appreciated. @shashank1320 I am downloading the files you suggested and will flash them exactly according to your instructions. I will get back to you in a couple of days with the result. Fingers crossed.
gopinaidu77 said:
Oh well. Seriously this is the same issue my frn asked me to help. This is soo serious that we can only unbrick through update.app or else service center. Since u said dload method works but stucks device on bootlogo. U need to visit service center if under Warranty
Click to expand...
Click to collapse
Unfortunately my warranty has expired. The annoying thing is that if i had sent my device off six months ago when this first happened it would still be under warranty but in the UK there is only 1 service center, yes 1, and its hundreds of miles away! So i figured i could solve it myself. You live and learn.
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
iantechie1979 said:
Hey there everyone. I still havent managed to solve the issue with my device and its not through lack of trying. I have re downloaded all of the stock firmwares that you can possibly find on the internet. I also found one ive necer seen before. Its a full service repair b355. Fingers crossed, a miracle might happen and it will just boot up like when i first bought it. to begin with tho, i'm going to start with b102 and work through them b120, b130 ,b130rollback ,b350(beta), b350, b355 and then the b355 full service repair! I also got a couple of rollback packages(around 80mb) if all else fails.
I know, i'm nuts!! Finally before i admit defeat i'm going to part with £15 to buy credits for the dc-unlocker and dcPhoenx programs. From what ive read it has a good chance of solving it. I've taken soooo long before considering this option because i think its wrong that someone(s) is making loads of money from this. Why havent huawei/honor included a similar program in hi-suite. Anyway ive gone off on a tangent.
One last question though. Strangely enough i only just thought of it recently....
Is it a necessity to have your sim card in the tray as well as the sd-card????? All this time i havent had a sim in the phone as its in a crappy old one so i can still communicate with the world!!!!
Thank you to everyone for taking your time to read this. I hope a solution is possible.
Click to expand...
Click to collapse
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
shashank1320 said:
No need of sim card in tray while using dload. Just sd card is fine. Let me go through it again and try to help before you go for 15 dollars for dc phoenix
Click to expand...
Click to collapse
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
iantechie1979 said:
Yeah i didn't think it made any difference but its good to make sure.
i'll be waiting patiently for any golden nuggets of help you can give me.
thanks shashank1320,:fingers-crossed:
Click to expand...
Click to collapse
Did you flash those files i given? If not can try. Else i will have to look for other alternative
yeah i downloaded those files you had mentioned in your post and followed the instructions to the letter.
I've got a suggestion if you have tried all these above.
Can you try the following on ADB and then try to unlock OEM again.
fastboot oem relock YourUnlockCode
I've done the same and it helped, even when bootloader displayed UNLOCKED. Please try it. :good::good:
Click to expand...
Click to collapse
Click to expand...
Click to collapse
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
NameNotFound74 said:
@shashank1320 Hi, i have similar problem with my NEM-L21 device... I tried to flash the Elite ROM v5.1 but i didnt succeed so i decided to restore my old rom from backup with TWRP. When i restored it it just didnt load. It was stuck on honor logo for a long time. I tried the dload method many times but nothing worked so far. I even tried unbrick it with HUAWEI Multi-tool but it also didnt worked.
Now i cant acces anything, just fastboot. I cant even turn off the device. Please can you help me somehow?
Click to expand...
Click to collapse
Try unlocking the bootloader again even if it is unlocked. It will factory reset the device and it should boot fine. Have stuck on this many a time and this was the method i followed.
If you look back through the threads where I've had some pretty serious issues with my p10 and I've probably spent more than 40 hours in the last week trying to fix it. In the end I ended up trying out DC-Phoenix unlocker to fix it. I must recommend trying everything before this as along the way I have read many other people problems and seen many awesome community members helping other out. However, if you get tired and a little dead inside I can confirm dc phoenix works and is definitely worth the 15 euros that it costs. It clearly has some worthwhile software as it has been able to flash .img's with ease that I couldn't get to work and even unlocks the bootloader without the unlock code (with a pretty exciting message saying Unlocking Backdoor ). So probs to the devs of dc phoenix for an awesome piece of software.
I must recommend flashing files from the download button in the program as the update.app's I tried to flash wouldn't work so I downloaded a pair (update_VTR-L29_C432B164_hw_eu.APP and Victoria-L29B_C432B164_Firmware_Denmark_Nonspecific_Android7.0_EMUI5.1.APP) from their url. That worked fine and fixed my phone that hasn't worked for days. :good:
Jyndon said:
If you look back through the threads where I've had some pretty serious issues with my p10 and I've probably spent more than 40 hours in the last week trying to fix it. In the end I ended up trying out DC-Phoenix unlocker to fix it. I must recommend trying everything before this as along the way I have read many other people problems and seen many awesome community members helping other out. However, if you get tired and a little dead inside I can confirm dc phoenix works and is definitely worth the 15 euros that it costs. It clearly has some worthwhile software as it has been able to flash .img's with ease that I couldn't get to work and even unlocks the bootloader without the unlock code (with a pretty exciting message saying Unlocking Backdoor ). So probs to the devs of dc phoenix for an awesome piece of software.
I must recommend flashing files from the download button in the program as the update.app's I tried to flash wouldn't work so I downloaded a pair (update_VTR-L29_C432B164_hw_eu.APP and Victoria-L29B_C432B164_Firmware_Denmark_Nonspecific_Android7.0_EMUI5.1.APP) from their url. That worked fine and fixed my phone that hasn't worked for days. :good:
Click to expand...
Click to collapse
in wich state was your phone ? mine is in error mode and even if i can flash a recovery by fastboot I'm still getting this error message.
I'm ready to pay them but i want to be sure they may save my phone first
I tried dc unlocker and my nova plus is still dead...30$ down the drain....
Bootloader locked
FRP unlocked
tiphergane said:
in wich state was your phone ? mine is in error mode and even if i can flash a recovery by fastboot I'm still getting this error message.
I'm ready to pay them but i want to be sure they may save my phone first
Click to expand...
Click to collapse
I could boot to bootloader huawei recovery and all that but no os installed. However when flashing a custom recovery it would appear to flash fine but then booting to recovery went to huawei recovery so I couldn't really do anything.
Jyndon said:
I could boot to bootloader huawei recovery and all that but no os installed. However when flashing a custom recovery it would appear to flash fine but then booting to recovery went to huawei recovery so I couldn't really do anything.
Click to expand...
Click to collapse
ok, me i can't turn it on. no more vibration nor leds when i plug it in. loose for loose i'm gonna try the testpoint method (the EDL cable don't work)
I have the AT&T version and I bricked it by attempting to flash CN 2.1. I knew the risks and its not a huge deal, but I was wondering if anyone has had any success unbricking this phone with miflash or qfil? I cannot seem to find a programmer that will flash this thing correctly. Most of them just reboot EDL mode immediately. I found one MSM8996 .elf programmer that at least hangs for a minute before failing, but thats about it.
loudog3114 said:
I have the AT&T version and I bricked it by attempting to flash CN 2.1. I knew the risks and its not a huge deal, but I was wondering if anyone has had any success unbricking this phone with miflash or qfil? I cannot seem to find a programmer that will flash this thing correctly. Most of them just reboot EDL mode immediately. I found one MSM8996 .elf programmer that at least hangs for a minute before failing, but thats about it.
Click to expand...
Click to collapse
the same problem bro, bricked after flashing CN firmware we need some one who downloading firmware for QPST
I am giving the uni Android tool a go. It cost me 50 bucks but allegedly they support the phone in the next release. I'll let you know what happens.
loudog3114 said:
I am giving the uni Android tool a go. It cost me 50 bucks but allegedly they support the phone in the next release. I'll let you know what happens.
Click to expand...
Click to collapse
Has the brother ROOT research been successful?
I got at&t zte axon m too (unlock cause I can use my simcard to phone and edge) and was trying to flash to cn 2.1
luckily I found this thread before the last step.
I would postpone for now, and just use whatever the phone can use, though I still sour from cannot use 4G, cannot tethering and at&t message backup & sync always pestering me to put at&t number (which I dont have cause I dont stay in us)
release unbrick tool
//forum.gsmhosting.com/vbb/f1019/zte-axon-z999-unbrick-done-flashing-uat-version-22-01-a-2590411/
uni-android tool released unbrick tool for ATT AXON M
i have bricked phone because update chinese rom on ATT AXON M
i paid for uat, wait 8 months, finally they did it
now supported flashing JUST ORIGINAL ROMS because axon m's bootloader not unlocked
docount said:
//forum.gsmhosting.com/vbb/f1019/zte-axon-z999-unbrick-done-flashing-uat-version-22-01-a-2590411/
uni-android tool released unbrick tool for ATT AXON M
i have bricked phone because update chinese rom on ATT AXON M
i paid for uat, wait 8 months, finally they did it
now supported flashing JUST ORIGINAL ROMS because axon m's bootloader not unlocked
Click to expand...
Click to collapse
i Can Comfirm this works ive done my self too cost a bit but phone is back to life!
Please can someone help with mine too I have the same problem after update ota by sdcard my phone is dead I want to bring it alive again axon m z999 at&t please help brother